Is there a way to detect a other iphone near me

Is there a way to detect a other iphone near me with a app or any other functionality of the iphone

Just any iPhone? or one in particular?
Find my Friends will allow you to locate people who have iPhones and have explicitly agreed to share their location with you. There are some third party apps which will allow you to locate people as well.
Other than that, no.

Similar Messages

Is there a way to detect model of iPhone by serial number or IMEI

Is there a way to check model of iPhone by serial # or IMEI #
I'm dying to find out what Apple sent me as my warraty claim, for my iPhone 5. I have heard of many people of late getting the 5s in place of their 5 when they have a warranty claim.

Hi tbednarczyk34,
Thanks for using Apple Support Communities. This article has information to help determine an iPhone's model:
Identifying iPhone models
http://support.apple.com/kb/ht3939
Cheers,
- Ari

Is there a way to detect two keys at the same time?

Is there a way to detect the keys if the user is holding two keys down at the same time?

yes, but you'll have to check outside of the event loop (i.e. don't check for it in the keyPressed method).
just use an array of keys that keeps track of which keys are currently down and which are up. you could use a boolean array but I use an int array because... Im not sure I've just done it probably because of my C background. anyway, basic setup:
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
public class MultiKey extends JFrame {
     int keys[];
     public MultiKey() {
          super();
          keys = new int[256];
          Arrays.fill(keys,0); // 0 = key is up
          enableEvents(AWTEvent.KEY_EVENT_MASK);
          show();
     public void processKeyEvent(KeyEvent e) {
          // the 0xff below binds the key code to below 256
          int key = (e.getKeyCode()&0xff);
          if (e.getID() == KeyEvent.KEY_PRESSED) {
               keys[key] = 1; // 1 = key is down
          else if (e.getID() == KeyEvent.KEY_RELEASED) {
               keys[key] = 0; // 0 = key is up
     protected boolean isKeyDown(int key) {
          return (keys[key] != 0);
     protected boolean isKeyUp(int key) {
          return (keys[key] == 0);
}so now at any time in your code you can check key state by using the isKeyUp and isKeyDown methods. this is about as close as you get to input polling in java unless you use LWJGL or something similiar ;)
you can try out a full executable example at my site here - just open up the jar and start holding keys down :)

Is there a way to detect all the photos already transferred to double (or triple) in iPhoto, so do not occupy space unnecessarily? Thank you from France.

Is there a way to detect all the photos already transferred to double (or triple) in iPhoto, so do not occupy space unnecessarily? thanks from France

Look in you main photo library. Are there doubles or triple photos there? If so delete the extras.
All photos are stored in the photo library. When you move a photo into an album the photo is not duplicated. The album contains a pointer back to the original photos. These pointers or aliases take up very little space.

Is there a way to detect motion and set markers automatically?

My video includes walking around with the camera. I walk, then stop and hold the camera in one area, then pan, then continue walking (and repeat).
While panning, there is some annoying flicker of vertical objects (beams, poles, whatever). I can use a horizontal fast blur to fix this, but I only want the blur applied when there is panning (not when the camera is relatively still). Doing it manually is cumbersome.
Is there a way to detect when motion is going on (over a certain threshold)? I would like PP to tell me when there is significant motion, and place markers in the points where it begins and ends (when motion goes over a threshold and then when it falls below the threshold).
Thanks, experts!

One thing you can try is to bring your footage into Prelude - it will lay out the entire clip so you can see thumbnail snapshots for the whole clip at once - that might give you a good start to see where there is a lot of motion. Then, you can add markers very easily at all of those points - and when you send it over to Premiere, the markers will show up on your clip.
Not automated, but a good workflow to achieve what you are looking for.

Is there a way to detect a bad http client handle before it locks up LabVIEW?

The attached VI demonstrates a simple way to hang LabVIEW such that the only way to recover full use of it is to kill the LabVIEW process. LabVIEW version is 11.0.1f2 and this problem will occur in both WinXP and Win7.
Is there a way to detect when an HTTP Client Handle refnum is stale and should not be used?
Is this a known bug?
Attachments:
Hang after Bad HTTP Client Handle.vi ‏15 KB

Have you tried the bad reference comparator?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Is there a way to detect if Excel is busy?

I have a VI that is testing three products at the same time, and writing data to three different excel spreadsheets. If more than one subvi is writing to Excel at the same time, I get an error. Is there a way to detect if Excel is busy, and wait until it is not busy?
metzler CLAD

The correct answer is the one that Putnam (and others) suggested: Encapsulate all the logic to perform a single write into a VI that is used wherever you need to write to an Excel file. This structure will guarantee that the code will only be writing to Excel from one place at a time.
If you don't want to have the different sections of the code waiting for their turn to come up, a variation on the theme would be to create a separate stanalone process that does nothing but write to Excel files. The rest of the code would pass it the data to be written using a queue. With this approach everybody seems to write at the same time, but the standalone process is actually serializing the Excel operations. This approach could even be extended to include the ability to read from files, but that is as they say, "...left as an exercise for the reader..."
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Is there a way to detect the end of a video?

Is there a way to detect the end of a video.. .mp4 or youtube? I want to be able to detect the end of a video and then have it do something...ie play on timeline or go to and play symbol.

For youtube the code would be something like this:
view-source:calkaweb.herobo.com/video.html
for HTML5 videos for youtube replace &version=3 with &html5=1 in the youtube URL
I have no idea how to impletent the youtube code into Edge tho other than an iframe but that wouldn't work I've tried :
http://forums.adobe.com/thread/1285212
You would need to place all of the youtube codes into edge in order for it to work but I duno how to do that and no1 answered the question in the thread I made about it.
as for MP4/HTML5 video you can use
var video = document.getElementsByTagName('video')[0];
video.onended = function(e) {
/*Do Something*/

Is it possible to have my text messages sent to my email as well? or is there a way to view them other than on the phone?

is it possible to have my text messages sent to my email as well? or is there a way to view them other than on the phone?

Sure. Go to the conversation that contains the message(s) you wish to forward. Tap the Edit button in the upper right corner. Select the message(s) you wish to forward using the radio buttons. Tap "Forward" at the bottom right of the screen.

Is there a way to select every other page in a multi page pdf and convert it to grayscale?

I'm going to ask this question in a few sub-forums, so if you think you've seen it, you might have.
Where I work I use a program that can print to pdf. We use it to produce mailings, usually postcards, that are addressed.
I often end up with a 500 page document that will print on 250 sheets of cover stock, which will get cut into 1,000 postcard, all pre-addressed and sorted by zip code.
Usually, the address side is all black and the front is color. The printers we use can print a black click on the address side and a color click on the other, IF the pdf is set up that way. Otherwise, both sides will be counted as color clicks.
I know I can select pages individually in a pdf and convert them to grayscale and those pages will be counted by the printer as black clicks, which are cheaper than color clicks.
The problem is, I have not figured out how to convert all the odd numbered pages to grayscale at once. As a result, I usually end up printing the color side simplex, then putting the job back in the tray and printing the black side. Of course, that only works if only one side is personalized, sometimes both sides are.
Is there a way to select every other page in a pdf and convert it to grayscale?

The Acrobat SDK has sample code that shows how to convert the colors for one page (the first page of a document). This sample can easily be adjusted to process every other page. You can then use an Action that executes this JavaScript to process the document. Do you know how to create an Action? If so, you can use this script (as I said, adapted from the sample in the SDK) to convert all odd pages (1, 3, 5, ...):
// Get a color convert action
var toGray = this.getColorConvertAction();
// Set up the action for a conversion to RGB
toGray.matchAttributesAny = -1;
toGray.matchSpaceTypeAny = ~toGray.constants.spaceFlags.AlternateSpace;
toGray.matchIntent = toGray.constants.renderingIntents.Any;
toGray.convertProfile = "Gray Gamma 1.8";
toGray.convertIntent = toGray.constants.renderingIntents.Document;
toGray.embed = true;
toGray.preserveBlack = false;
toGray.useBlackPointCompensation = true;
toGray.action = toGray.constants.actions.Convert;
// Convert every other page
for (var i=0; i<this.numPages; i++) {
console.println("Processing page " + i);
if (i % 2 == 0) { // change to "if (i % 2 != 0) {" for all even numbers
console.println("in page " + i);
console.println(this.colorConvertPage(i, [toGray], []));
As I've indicated in the code, you can change this to all even numbers by changing the == to !=

Is there a way to select every other page in a pdf and convert it to grayscale?

I'm going to ask this question in a few sub-forums, so if you think you've seen it, you might have. Someone suggested it might be done with Javascript. I know nothing about Javascript.
Where I work I use a program that can print to pdf. We use it to produce mailings, usually postcards, that are addressed.
I often end up with a 500 page document that will print on 250 sheets of cover stock, which will get cut into 1,000 postcard, all pre-addressed and sorted by zip code.
Usually, the address side is all black and the front is color. The printers we use can print a black click on the address side and a color click on the other, IF the pdf is set up that way. Otherwise, both sides will be counted as color clicks.
I know I can select pages individually in a pdf and convert them to grayscale and those pages will be counted by the printer as black clicks, which are cheaper than color clicks.
The problem is, I have not figured out how to convert all the odd numbered pages to grayscale at once. As a result, I usually end up printing the color side simplex, then putting the job back in the tray and printing the black side. Of course, that only works if only one side is personalized, sometimes both sides are.
Is there a way to select every other page in a pdf and convert it to grayscale?

The Acrobat SDK has sample code that shows how to convert the colors for one page (the first page of a document). This sample can easily be adjusted to process every other page. You can then use an Action that executes this JavaScript to process the document. Do you know how to create an Action? If so, you can use this script (as I said, adapted from the sample in the SDK) to convert all odd pages (1, 3, 5, ...):
// Get a color convert action
var toGray = this.getColorConvertAction();
// Set up the action for a conversion to RGB
toGray.matchAttributesAny = -1;
toGray.matchSpaceTypeAny = ~toGray.constants.spaceFlags.AlternateSpace;
toGray.matchIntent = toGray.constants.renderingIntents.Any;
toGray.convertProfile = "Gray Gamma 1.8";
toGray.convertIntent = toGray.constants.renderingIntents.Document;
toGray.embed = true;
toGray.preserveBlack = false;
toGray.useBlackPointCompensation = true;
toGray.action = toGray.constants.actions.Convert;
// Convert every other page
for (var i=0; i<this.numPages; i++) {
console.println("Processing page " + i);
if (i % 2 == 0) { // change to "if (i % 2 != 0) {" for all even numbers
console.println("in page " + i);
console.println(this.colorConvertPage(i, [toGray], []));
As I've indicated in the code, you can change this to all even numbers by changing the == to !=

Is there a way to play videos other than getting them through itunes

is there a way to play videos other than getting them through itunes. I have lots of dvd's that I want to play on my ipad but don't want to have to buy them again through itunes.

You'll need to rip the DVDs to your hard drive using a tool such as Handbrake. Be sure to rip them in an iPad compatible format. Then you can drag them into iTunes and sync them to your device. It is a little bit of work but that's really the only way without (as you say) rebuying them in iTunes.

Is there another way to close apps other than deleting them from the multitask bar.....I have a small crack in the bottom of my screen and that part of the screen does not recognize the touch. :(

Is there another way to close apps other than deleting them from the multitask bar.....I have a small crack in the bottom of my screen and that part of the screen does not recognize the touch.

There's generally no reason to be closing them that way at all. The apps you see in the recents bar are just that, apps that you used recently. Most of them are doing absolutely nothing. The only apps that are really doing anything in the background are ones that play music and ones that are using location services. Just leave them be.
Best of luck.

I wanted to know how to view the gifts I've sent to people and (if possible) know if they received and downloaded them. Is there any way to do that, other than asking the person?

I wanted to know how to view the gifts I've sent to people and (if possible) know if they received and downloaded them. Is there any way to do that, other than asking the person? Obviously I want the gift to be a surprise (for my best friend specifically) so asking them if they received it would ruin that.

Have you tried resetting your iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

I somehow deleted my hard drive. Is there any way to fix this other than buying a new computer?

I somehow deleted my hard drive. Is there any way to fix this other than buying a new computer?

Sure.
If your hard drive is still physically working, simply restore it from your computer's backup.

Is there a way to detect a other iphone near me

Similar Messages

Maybe you are looking for