Is there a way to display the number of pictures or photos in a smart album

when I look at my project view on the left, all of the projects or folders show the number of photos that are in them at a glance. However, on my smart albums, it just shows the looking glass which you can click on to edit the properties. Is there any way for aperture to show the number of photos in a smart album without having to open the smart album and count? Thanks!

No. But when you click on them, the number of images they contain will be at the bottom of the Browser screen and in Split View just above the bar separating the Viewer from the thumbnails.

Similar Messages

  • Is there a way to control the number of concurrent SMTP connections on Database Mail?

    Las week Rackspace started controlling the number of concurrent SMTP connections and we are now getting the following message when we send as little as 15 messages at a time using Database Mail:
    Exception Message: Cannot send mails to mail server. (Service not available, closing transmission channel. The server response was: 4.7.0 smtp13.relay.dfw1a.emailsrvr.com Error: too many connections from IP xxx.xxx.xxx.xxx)
    We are using SQL Server 2005 and Windows 2003 and we have been doing this since 2006 with no problems
    Is there a way to control the number of concurrent SMTP connections used by Database Mail or the Database Mail external executable DatabaseMail90.exe?

    Hi rkohler,
    Usually, we can use the Database Mail Configuration Wizard or the Database Mail stored procedures to determine the server name and port number for the Simple Mail Transfer Protocol (SMTP) server . In the SMTP server points, we can set or increase the number
    of concurrent connections.
    There is similar issue about database email on SQL Server 2005, you can refer to the following post.
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/6bb7b600-f025-451b-898b-2caa29c10d4d/only-some-email-gets-sent-successfully-from-spsenddbmail-database-mail-on-sql-server-2005
    Thanks,
    Sofiya Li
    If you have any feedback on our support, please click here.
    Sofiya Li
    TechNet Community Support

  • Is there a way to display the date and time on my officejet 6500

    HP Officejet 6500a Plus Windows XP_ Is there a way to display the date and time on the display of my printer

    Are you referring to the Date and Time some cameras put right on the image?  If so there is nothing really good in iPhoto to do this. You could try the Retouch tool and see how that looks but I think you will need something more precise and powerful, like the clone tool in Aperture.
    Also something like PhotoShop or GIMP - The GNU Image Manipulation Program (free) should do what you want also.
    If your asking about some other date post back.
    regards

  • Is there a way of displaying  the various item in my Downloads folder as icons arranged in order of Date Created, such that the most recent items appear at the bottom, rather than the top?

    Is there a way of displaying  the various item in my Downloads folder as icons arranged in order of Date Created, such that the most recent items appear at the bottom, rather than the top? I know this can be done when they are displayed as a list, but I want icons!

    Hi geezer,
    when you open your 'Downloads' folder choose 'View'  in the Menu bar and choose:
    'as List'
    'Show View Options'
    In 'View options' window you tick:
    'Always open in list view'
    'Date Modified', or
    'Date created'
    Now inside the 'Downloads' folder click on 'Date Created' (or 'Date Modified')
    column to get items alined from oldest to newest date (or reverse)…

  • Is there a way to increase the number of layers in PS touch for iPad? Can Adobe do something about this?

    Is there a way to increase the number of layers in PS touch for iPad? Can Adobe do something about this?  I have been using PS touch for iPad for a few years and ALWAYS end up with a message that I have reached the maximum allowable number of layers.  not to mention of course a simple tool for drawing straight lines which is a must.  I may be missing something.  I would have imagined that a respectable company like Adobe would have added over the years a small upgrade to solve these issues.
    thanks. 

    Hi Patrick,
    I'm working on a 30" monitor, so it's effectively 2560x1600.  It only seems to be showing 2 tracks at a time, unless there is a preference or setting I'm missing that I can't seem to find in the documentation.  Here is a screenshot:
    I don't see any areas for expanding the timeline.  I can scroll vertically in the timeline, but I can't seem to actually get a larger static vertical area for showing more tracks at once.  The only vertical resizing widget is to expand the bottom or top panels, not the timeline.
    Thanks,
    Jason

  • Is there a way to find the number of downloads of music from itunes store?

    Hi,
    Is there any way to find the number of downloads of each music file available on itunes store. If not exact no of downloads but atleast a relative term to find the rank of the music track From any API
    Thanks
    Sandeep

    A: Is there a way to read the number of active sequence executions from the Engine?

    Scott,
    > One way of handling the issue of init once a set of instruments is to
    > create a new sequence file that has a sequence to init and a sequence
    > to close the instruments. Assuming that you always terminate a
    > sequence and do not abort them, you could add a ProcessSetup and
    > ProcessCleanup callback sequences to the client sequence file that
    > using these instruments. These callbacks are automatically called by
    > the process model in both the Single Pass and Test UUTs execution
    > entry points. The callback sequences could call the init and close
    > sequences for the hardware. In the hardware sequence file you could
    > reference count the number of execution that init and close by setting
    > the file globals in the sequence file to be shared across executions
    > and then add a numeric value that keeps track of references for the
    > instruments. The init sequence adds to the count, and the close
    > sequence subtracts from the count. The init sequence inits the HW if
    > the count is 0->1 and the close sequence closes the HW if the count is
    > 1->0.
    >
    > This is one of many ways in TestStand that this could be done, not to
    > mention that this could also be done in a similar way in a LabVIEW VI
    > or DLL directly.
    That sounds like it will work. I'll try adding a client count
    increment/decrement in the DLL initialize and terminate functions. This
    should essentially perform the same tasks as the callback scheme you mention
    above, no?
    The reason I didn't think the 'client counting' scheme would work initially
    was I mistakenly thought that the termination function would not get called
    under Terminate conditions. Since Terminate conditions happen a LOT during
    our initial debug of new UUT types, I didn't think that would be acceptable.
    I forgot that lacing the terminate funciton in a cleanup step group, I can
    force it to be called in Terminate conditions.
    > If you abort an execution then the reference counting idea above would
    > fail to decrement properly. That might b... [Show more]

    Read other 5 answers

  • Is there any way to limit the number of Threads running in Application(JVM)

    Hello all,
    is there any way to limit the number of Threads running in Application(JVM)?
    how to ensure that only 100 Threads are running in an Application?
    Thanks
    Mohamed Javeed

    You should definitely use a thread pool for this. You can specify maximum number of threads that can be run. Be note that the thread pool will only limit the number of threads that are submitted to it. So donot call "Thread"s start() method to start thread on your own. Submit it to the pool. To know more, study about executor service and thread pool creation. Actually it will not be more than 20 line code for a class and you might need maximum of 2 such classes, one for threadPool and other one for rejection handler (if you want).
    Just choose the queue used carefully, you just have to pass it as a parameter to the pool.
    You should use "Bounded" queue for limiting threads, but also be careful in using queues like SynchronizedQueue as the queue will execute immediately the threads submitted to it if maximum number of threads have not been running. Otherwise it will reject it and you should use rejection handler. So if your pool has a synchronized queue of size 100, if you submit 101th thread, it will be rejected and is not executed.
    If you want some kind of waiting mechanism, use something like LinkedBlockingQueue. What this will do is even if you want 100 threads, you can specify the queue's size to be 1000, so that you can submit 1000 threads, only 100 will run at a time and the remaining will wait in the queue. They will be executed when each thread already executing will complete. Rejection occurs only when the queue oveflows.

  • My iphone is stolen .. is there any way to know the numbe of the person going to use in the future .. I have the serial no. and every thing .. and it is registered under my name and my information with iTunes ??

    my iphone is stolen .. is there any way to know the numbe of the person going to use in the future .. I have the serial no. and every thing .. and it is registered under my name and my information with iTunes ??

    If you had find my iphone activated on the iphone itself before it was stolen, then you may be able to track it.
    Otherwise, there is nothing you can do.
    Sorry.
    Report it to the police and your wireless carrier and change your password.

  • Is there a way to display the coordinates(x,y)  of the objects automatically ?

    hi and happy new year
    is there a way to display the coordinates(x,y)  of the objects automatically (may be on a label over the object ) and print them?
    i mean i want to design a game level (in pixels) place the object on the map ang get the locations automatically to print them
    thank you
    txarly

    Good day!
    Which version of Photoshop do you use?
    If you have CS6 Etended the Measurement Log might provide some options to store and print the information separately, but if I interpret your wuestion correctly (for example that by »object« you mean »Layer«) I think a Scripting approach would be best.
    Scripts can be used to automate tasks with more options regarding conditionality than Actions by using JavaScript-, VB- or ApplaScript-code to control Photoshop.
    If you want to pursue that option you could ask for help over at
    http://forums.adobe.com/community/photoshop/photoshop_scripting
    or
    http://ps-scripts.com/bb/
    But please post screenshots/mock-ups right away to illustrate what you start with and what result you want.
    Regards,
    Pfaffenbichler

  • Is there a way to display the song timing/duration?

    I have a new 6th generation iPod Nano. Is there a way to display the song timing? Sometimes I want to fast forward to right at the end. I guess I miss the click wheel when I could zoom right to the end without just holding down the arrow and guessing about when I'd get there. Is there a way to access this function on the new nanos?

    You're welcome. You can find the manual for the 6th Generation Nano here: http://manuals.info.apple.com/enUS/iPod_nano_6thgen_UserGuide.pdf

  • Is there a way to control the number of consumed messages from JMS?

    Hi everyone,
    I have a BPEL process that is consumes messages from a foreign queue, performs a transformation, and passes it to Oracle Apps. I'm curious if there is a way to control the number of messages consumed at a time for processing.
    For example, if we place 50 transactions on this queue, I would like to only consume 10. And then as each one is processed and passed to Oracle Apps, I would like to pull another transaction off the queue. So basically I would only be processing 10 at the most.
    The issue I am having is we put 50 on the queue and the 50 are take off right away. But then half are making it into Oracle Apps and the remainder is failing with a JCA Connection Factory max connection error.
    Instead of changing the settings to get more through, I am wondering if it's possible to limit the number being processes at any one time.
    Thanks

    Hi,
    Have a look at the adapter.jms.receive.threads Property for JMS Adapter...
    http://docs.oracle.com/cd/E21764_01/core.1111/e10108/adapters.htm#BABCGCEC
    Cheers,
    Vlad

  • Is there a way to display the legend for a chart, but not the chart?

    Hi,
    I have a stacked column chart and a line chart on top of each other.   I can't use the legend for the stacked column chart because the data will change from month to month, and the 2 charts will not be aligned.  I copied the stacked column chart to another part of the canvas and want to display only the legend, but the chart is still displaying.  Is there a way to prevent the chart from displaying?    Thanks.

    hi Jim Wojewnik,
    we can show only the legend in a pie chart by dragging the edges to closer.do the following,
    select the pie chart,select the edge of the chart and make it small and u ll find the pie chart shrinking.make it lean such that the pie chart disappear.
    try this work around and let me know.
    regards,
    ravi.

  • Is there any way to limit the number of times that a PDF can be opened?

    I run a small publishing company and we want to provide exam copies of our books to professors.  At present our exam copies have the words EXAM COPY as a water mark on every page and we've also made the files so that they can't be printed or easily copied.  However, we'd like to also restrict these PDFs so that they can only be opened 5 times.  I've read about FileOpen but that approach seems a bit more complex than needed.  Is there any other way to restrict the number of times that a PDF file can be opened once it is downloaded?  Thanks in advance for any suggestions.

    DRM soltions like FileOpen are your best bet for PDFs. Others include Adobe's LiveCycle Rights Managment, LockLizard, Armjisoft PDF Security OwnerGuard, etc.
    They all work and are priced differently, but there's really nothing for what you want to do that is both simpler and secure.

  • Is there a way to display the time-code of all tracks?

    I bumped some audio out of sync.  Is there a way to display all my audio and video time-codes simultaneously, so that I can see if my tracks are out of sync, and by how much?

    You could link video and audio tracks in the timeline
    that you want to stay in sync with each other.
    Link or unlink video and audio
    Once video and audio clips are linked in the timeline, you can
    view the offset in frames if you happen to accidentally slip the sync.
    There are a couple of automatic methods for recovering lost sync in
    linked clips.
    Automatically synchronize clips that were moved out of sync

  • My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to display the data?

    My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to disable the data held on it and ensure that if it is fixed, nobody can use/see my data and access my account?

    Hi Gazpan,
    Thanks for visiting Apple Support Communities.
    I recommend using the steps in this article to back up your iPhone if possible:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    You may also find this advice helpful for your situation:
    What to do before selling or giving away your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht5661
    If you no longer have your iOS device
    If you're using iCloud and Find My iPhone on the device, you can erase the device remotely and remove it from your account by signing in to icloud.com/find, selecting the device, and clicking Erase. When the device has been erased, click Remove from Account.
    If you're unable to complete either of the above steps, you should change your Apple ID password. Changing your password won't remove any personal information that is cached on the device, but it will make sure that the new owner can't delete your information from iCloud.
    Cheers,
    Jeremy

Maybe you are looking for