Is there a way to isolate keying to specific area?

I do not think you can do this, but it would be really nice. Is there a way to use a bounding box to key a specific place. The reason I want to do this is because I have really good keying on 75 % of my body, but my left arm still has some green around it slightly. While I can adjust the whole think to take it out, it causes me to have to shrink myself in the 75% when it is not neccessary. So, if I could draw a bounding box or something around that 25% and and apply another ultra key just to it, it would be perfect. I am hoping this can be done, but I as I said, I do not think that it can.

I just figured out how to do it or at least one way to do it. If you create an adjustment layer, you can move the layer around to be over the area you want to do more keying. Just add the ultra key to the adjustment layer and it will adjust the keying only where the adjustment layer is. I sure there might be another way, but I think this will work for what I need. If anyone has any ideas of why Premerie keeps locking up when trying to encode aftereffects has changed the video, that would be awesome.

Similar Messages

  • I have a A4 document (569 pages) and within that A4 there are few A3's. Is there a way to isolate the A3's or find out what page numbers are A3's instead of scrolling through all the 569 pages???

    I have a A4 document (569 pages) and within that A4 there are few A3's. Is there a way to isolate the A3's or find out what page numbers are A3's instead of scrolling through all the 569 pages???

    thank you for the info... however I'm done buying pdf readers.... I've got three now, that should suffice.
    I don't think there's a problem such as you mentioned because the pages are all similar : text and drawings. Some of the pages with drawings work, other similar pages don't.
    I converted with Calibre to epub format and this seems to work !!!
    So good so far...
    Now I need to find a conversion to pdf to allow me to use goodreader or iannotate.
    Basically... the text is ok, because a conversion allows reading. So a shortcoming by Apple in my opinion. Again, all pdf's should be readable on such an expensive tool !!!

  • Is there a way to find out where iMessages are being sent from? I've received messages from an unknown email that are offensive and considered to be harassment.

    Is there a way to find out where iMessages are coming from? I've contacted security personnel at my school and I'm brig harassed. I just want it to stop.

    '''Here is an update to my former response.'''
    Here is a safe way to look at an email which you think is suspicious:
    * right click on the message and select 'Save As'
    * the file name will be the email subject followed by an extension of .eml
    * store it in a folder you can find easily, such as your Documents
    * using your file explorer, right click on the file name and open it with Notepad or a similar text editor (NOT Thunderbird!)
    * even though the format is not easy to read, you should be able to see who sent it to you, and also read the message text.
    Since you are looking at the message in a text editor, there is no chance a link can activate something bad. I have used this method many times, and have found several spoofs of email names of my friends.

  • Is there a way in iTunes to "stich" or combine songs?  Example Journey's Anytime and Feeling That Way are always played together.  Is there a way to combine them so they are not separate songs?

    Is there a way in iTunes to "stich" or combine songs?  Example Journey's Anytime and Feeling That Way are always played together on the radio.  Or ZZ Tops Waitin' For the Bus and Jesus Just left Chicago are always played together. Is there a way to combine them so they are not separate songs?

    Not in iTunes.
    Are these ripped from a CD?
    See hhgttg27s post here
    -> https://discussions.apple.com/thread/6867148
    If not, you will need to use another application to combine them such as this script...
    -> http://dougscripts.com/itunes/itinfo/jointogether.php

  • Is there a way to find how many users are logging on to my site?

    Is there a way to find how many users are logging on to my site at a specific time?
    Thanks in advance..

    Is it possible to use an EJB3.1 Singleton beans for this too? (instead of the application context)
    Or will this create a bottleneck because of the standard write lock? It wouldn't be thread safe to provide a read lock on a user_counter increment method?

  • Is there a way to permanently block a specific open wifi network?

    Is there a way to permanently block a specific open wifi network?

    Well, the only workaround is if you get along with your neighbors and they're understanding of what you want to accomplish, not to mention they should password protect their wifi access as well.  This of course depends on the density of your surrounding neighborhood. 
    Start with checking the WiFi strength from your phone in their room.  If you're getting 4 solid bars it's likely your next door neighbor, and of course weaker would be farther (Help narrow your search a little).  Neighbors should password their router anyways since most providers I know put a cap on the amount of data on the plan (I think Comcast is something like 200 Gigs....I know that's a bit and I hardly come close to the mark, but if everyone around me was using my wireless that would all add up quickly).  Hope this helps.

  • Is there any way to identify the two classes are compiled by same vm

    Is there any way to identify the two classes are compiled by same vm?
    Thank's a lot.

    I think this is the better forum than java compiler. The answer to the question you asked is no.
    But that question is not the best way to address your problem.
    If this were me, I'd use a tool like ASM (http://asm.objectweb.org/) to read in that file, and replace the getToday() method, with one like this
    long getToday() {
        return 20080101;
    }and replace the class file with this new one. (keep the old one, they might be using a class loader that verifies class signatures or something)
    (They said the code you are looking at could have been changed by you - so take the hint and change it back).
    If they've ripped you off, this will restore justice much more cheaply and effectively than involving the lawyers. If they then sue you for breaching the license agreement, that would probably force them to disclose their underhand tactics.
    OTOH, if you're lying to us about the purchase, and needing to pay for upgrades to fix the performance issue, and instead are trying to crack some trial software, then I hope they are using a custom class loader that checks the integrity of the classes.
    If you are being ripped off, why are you not telling us the name of the company? I am not sure who is being ripped off here.
    Bruce

  • My iPhone 4 running iOS 7.0.4 deleted all of my stored notes, I'm currently restoring to see if I can retrieve them, is there any way I can restore a specific saved backup?

    So, I just went into my iPhone notes (iPhone 4 iOS 7.0.4), and found that all my notes had been deleted. I did recdently change the mail account I was using, could that be the issue? I'm very worried as I had some bank details and other personal information stored in these notes. Is there any way I can select a specific stored backup to restore from?

    Well, in iTunes, if you had not changed to sync notes to Outlook, that would answer that question. I sync my notes to my Outlook and have never had an issue. The only thing you need to watch is your archive setting. If you have notes set to archive after a certain amount of time, you will find that after non-use on the iPhone, they can seem to disappear. They will just not sync back, but are kept in the archive of Outlook. They are never deleted unless you actually delete them.
    I'm glad you were about to find your notes.

  • TS2755 is there a way to block texts from specific numbers to imessage with out turning imessage off?

    is there any way to block text from specific numbers to imessage without turning imessage off?

    Go to Settings > Messages > Send & Receive > You can be reached by iMessage at:
    Select the right facing arrow in a blue circle next to the email address this girl is sending iMessage to and select Remove This Email.
    If she has your cell phone number, she can switch to sending iMessage to that and there will be nothing you can do, but removing the email address will prevent you from receiving an iMessage addressed to that email address.

  • HT201269 Hi I've been using apple products for sometime now , I have one iPad , & 2 iPhones under my apple Id but that's as I know oh and maybe an old mini iPod I lost but my question is, is there any way to check how many devices are under your apple ID

    Hi I've been using apple products for sometime now , I have one iPad , & 2 iPhones under my apple Id but that's as I know oh and maybe an old mini iPod I lost but my question is, is there any way to check how many devices are under your apple ID ?

    If you have registered all your Apple products, you can see them at:
    https://supportprofile.apple.com

  • IS THERE ANY WAY TO FORCE KEY COMMIT

    Hi:
    Is there any way in forcing when inserting/updating a record in a block to call KEYCOMMIT. For Example, if the user inserted/updated a record and before saving the user may quit the form. I would like to enforce the keycommit trigger to be called when the form is opted to close.

    Hello,
    Try the following in Key-Exit trigger:
    BEGIN
    IF :system.form_status = 'CHANGED' THEN
    DO_KEY('COMMIT_FORM');
    ELSE
    EXIT_FORM(NO_VALIDATE);
    END IF;
    END;
    Regards,
    George
    Hi:
    Is there any way in forcing when inserting/updating a record in a block to call KEYCOMMIT. For Example, if the user inserted/updated a record and before saving the user may quit the form. I would like to enforce the keycommit trigger to be called when the form is opted to close.

  • Is there a way to search for photographs that are missing?

    I have discovered that some shots that I thought had been imported from iphoto are in fact missing (when I go to open them there is a badge with the yield sign and an exclamation point in it)
    I don't think this is the end of the world as I have the original files in various places and can import them (I guess)
    but is there a way to search to find all the shots that are missing?
    right now I'm having to scroll through the whole database in the list format and I have a lot of shots. can't seem to figure out how to do a search for missing shots…
    m

    1. Create a smart album and in the drop down in the top right corner select file status
    2. Check mark the file status box and select 'Offline'
    Now you should have all your 'Offline' (Yellow Exclamation and/or Red Slash) files.
    To reconnect..
    1. Select the missing files.
    2. Go to File and scroll to Manage Referenced Files
    The dialog box will have one of the photos selected
    3. Select the drive and folder that contains the referenced file and select it
    4. Click 'Reconnect All'
    This might not reconnect all of them, but the dialog box will still be open and you can reconnect the ones left.
    Narvon
    Message was edited by: Narvon

  • I lost my movies I purchesed on Itunes. Is there a way to get them back, they are stuck on my Apple TV

    Is there a way to recover my movies

    The good news, if you purchased the music in iTunes, it is linked to your apple id.  You can re-download the content at no additional charge (as long as it is still available in the iTunes store). 
    http://support.apple.com/kb/HT2519

  • Is there any way to judge whether two streamings are casted by the same client?

    Hello,
    My app use two different streams to send video and audio from flash clients to the server.
    So another client need to judge whether two streamings are casted by the same client or not.
    Is there any way to do this?
    For example, if it is possible to get ip address from netStream instance, it will be a solution.
    Could anyone teach me this?
    Thanks in advance!

    From the FCP 7 User Manual. You can access your copy of the Manual through the HELP menu on the menu bar at the top of your main screen.
    x
    Subtract Composite Mode
    Subtract darkens all overlapping colors. Whites in the foreground image go black, while whites in the background image invert overlapping color values in the foreground image, creating a negative effect.
    Blacks in the foreground image become transparent, while blacks in the background image are preserved.
    Overlapping midrange color values are darkened based on the color of the background image. In areas where the background is lighter than the foreground, the background image is darkened. In areas where the background is darker than the foreground, the colors are inverted.
    The order of two clips affected by the Subtract composite mode is important.
    Difference Composite Mode
    The Difference composite mode is similar to the Subtract composite mode, except that areas of the image that would be severely darkened by the Subtract composite mode are colored differently.
    The order of two clips affected by the Difference composite mode does not matter.

  • Is there a way to recover your files that are gone if you purchased them?

    lost all music from iphone and computer, is there a way to recover it? I went to purchase something and itunes store still acknowledges that I purchased it, is there a way to re-download it?

    You buy one and only one download, just as you buy one copy of a cd from a store.  It is your responsibility to backup/move/copy your music.
    It has always been very basic to always maintain a backup copy of your computer.  Use this to put everything back.

Maybe you are looking for

  • How to embed audio to my website using quicktime when I get "file not found

    hi, i've been trying to embed audio into my website all night and I get a file not found message even though I;ve checked 100 times and all files are where links say they should be.. but even just linking to audio (mp4) files won't work... everything

  • Will iPod touch 2nd gen work on iTunes 11

    I have a iPod touch 2nd gen and cannot get new songs off my iTunes 11. Does this mean I no longer can add songs to this device? Thanks for any advise in advance.

  • Pages aren't loading right and can't find answer in atricles.

    For 2 days now every site I go to normally is loading weird. Things are piled up on top of each other, things dissappear, the things that aren't piled on each other is in blocks instead of pictures, icons, etc... and i have to reload all the time-pre

  • File system /usr/sap/hostctrl/work getting full rapidly

    Dears, Recently We have installed PI 7.1 on AIX 6.1 and database is Oracle 10g. Everything is working fine but we are facing one strange issue with it. Our file system  /usr/sap/hostctrl/work  is getting full again and again,I checked that there is a

  • I don't know why win7 stop itunes working.

    Hello. I don't know why Windonws stops itune working when importing music. I considered what cause to do that,but I can't find out. Icould put music into ipod classic the day before yesterday. Now I can't. Pl give me right direction if anybody know t