Is there a way to place markers while recording?

Is there any way to add markers to a GarageBand project while recording it? If there is not, is there a way to ask Apple to add that feature? On another note is there another Apple product that has that feature (such as Logic Express or Logic Studio)?

victoriafromsioux falls wrote:
I realized from your reply that I had to actually use a podcast recording rathar than just a voice recording
it actually doesn't matter what type of project you create, as long as you "show" the podcast track

Similar Messages

  • Is there a way to place markers in a multicam clip, and then have those same markers carry over when you select part of the clip for a project (or various projects)?

    Is there a way to place markers in a multicam clip, and then have those same markers carry over when you select part of the clip for a project (or various projects)?

    Thanks. Beforehand, I was double clicking on the multicam clip and forced to make a marker on either the Cam A or B. I realize now that I can do it in the Event Browser. THANK YOU.
    Considering I may create >20 markers per clips for around 10 different interviews, I wish there was a way to bring the Event Brower to the bottom half of the FCPX windows, to resemble the screen orientation when I'm working in an actual project (one could do this in iMovie), and this way the markers could be listed to the left without having all the other event clips around it. Is that clear? Is that possible?

  • Possible to place markers while recording?

    I plan to do a lot of concert recordings with LP8. It's a pain to split up the tracks after the fact though. My question is this: Can I make markers (perferably with text to store the artist/title) with LP8 to denote the start of each track while it is recording?
    Thanks,
    Mike

    From the LP8 user's manual Page 126 : "You can use the Create Marker key commands to add markers on the fly during playback. "
    You can also name and edit the marker names, see LP user's manual Page 128.
    I recommend you download the LP user's manual to read more about this in detail.

  • Is there a way to monitor audio while recording video on iphone?

    I use an external microphone with a y-splitter for plugging in the mic but I can't get any sound out of the headphone side. Don't know if it's the adapter or if the phone just doesn't do that.

    There are some special microphones made for iPhone use that provide headphone output, such as the iRig
    <http://www.ikmultimedia.com/irigmic/features/>

  • 70D Is there a way to control audio while recording video?

    I have figured out how to control the audio manually prior to entering the video record mode (no thanks to the manual) but can’t figure out how to control it once the camera is recording.
    Solved!
    Go to Solution.

    Tim, if Canon were to introduce a software update that allowed one of the dials to increase or decrease record level during recording, that would really elevate the 70D's standing as a video device. Is it possible?
    I was recording a musician the other day who turned up his amp during a song and was stuck with the manual level I'd set before he started. It's a helpless feeling knowing you've either got to settle for distortion or stop and restart the recording, losing part of the song.

  • Is there a way to place an encrypted document on the iPhone, a document that contains passwords and private information, really well protected from hackers?

    Is there a way to place an encrypted document on the iPhone, a document that contains passwords and private information, really well protected from hackers?
    Can such a document be exempted from the cloud feature, a feature that I use for the rest of my stuff?
    If so, how can I do this?

    Yeah, but 1Password charges for both the iPhone client AND the Mac/Windows client, and it ain't cheap! Plus, it only syncs via Dropbox, and where I work Dropbox is banned due to security concerns.
    Sure, there is Secure Notes, a free form entry part of 1Password, but a bug in the program will not let you view all the text you can put in the field!! You have to EDIT the text to see the whole list! What if you accidentally delete or change an entry while scrolling through your entries??
    Plus NONE of the programs I have tried, and I have tried a lot, can find text IN the file - do a search and it will tell you what file/folder the text is in, but YOU have to scroll down through 400 entries one at a time looking for the entry.
    I use a program called Secure Text - I have many admin passwords, and DO not need a field based program. Secure Text is totally freeform entry. However, it suffers from the same search issue.
    If someone knows of a secure text program that uses a file/folder type of layout, free form entry, AND can actually tell you where in the file/folder the text you searched for is, PLEASE let me know! Plus sycing via some method other than Dropbox would be a plus.
    Before I got my iPhone, I used a program called Tombo for my WinCE based system AND my Windows workstation, and the synced up fine without iTunes, internet, DropBox type functionality or any of that horsecoller stuff Apple likes to throw on your neck.

  • HT1040 Is there a way to place an order with more than one item at a time? For example I am going to make a few books and have them all shipped to me.  Do I have to order and pay shipping for each one individually?

    Is there a way to place an order with more than one item at a time?  for example I am making a few books and having them all shipped to me.  Do I have to order each one separately and pay shipping each time?

    You have to order each book separately, if the books are different. Only multiple copies of the same book can be ordered in the same order, see here
    Regards
    Léonie

  • Is there a way to place the Dock on the bottom of a secondary monitor?

    I use my iMac as primary monitor and a secondary display on the right. Is there a way to place the dock on the bottom of the secondary monitor(in a way that the display arrangment actually match the monitor position on my desk)?
    I want something like this, with the red marker as the dock(the display arrangment match how the monitors are in my desk):
    The solution I'm working with is:
    I could turn the monitor attached to the iMac as primary(and set the dock there), but I got some problems with programs opening in wrong positions all the time and some issues with full screen programs as well(also I think the iMac didn't handle well setting the primary display in another monitor).
    If there isn't a way to do it in Mountain Lion, will Maverick do any better?

    Don't know of a way to get the Dock on the top.
    But, to keep it out of the way but available, in the Dock prefs pane in System Preferences you can set it to "automatically hide and show". Choosing that setting means the Dock will normally be hidden; to gain access to it, all you need do is brush the bottom of the screen (or the side you have Doc set to) with the cursor, and it will appear, staying visible only until you move the cursor away.
    You can also use the keyboard combo Command-Option-D to invoke/revoke Dock Hiding, which in effect means you can use that keyboard command to toggle the Dock's visibility.

  • Is there a way to "loop" audio while I try audio filters?

    Is there a way to "loop" audio while I try audio filters?
    Thanks

    Yes.
    Toggle Loop to ON
    Set an In and Out in the timeline then select Play In to Out.
    If you can't find these commands in the Menu Bar or are looking for the keyboard commands, use Help.
    Have fun.
    x

  • Is there a way to cycle a while loop on its own and only controlled by the number of cycles?

    Hello everyone, 
    Newcomer here, recenlty just took core 1 and 2 the past couple of months
    is there a way to cycle my while loop so that the daq assist receives the same outputs from the list box table? So pretty much I need the VI to be able to read the voltages and time values from the list box and then execute them, I've manage to do this, but then I need it to stop for a given time and then execute again the same voltages. This would be controlled by a control for "number of cycles" input. 
    Can someone tell me why my "Emergency Stop" button doesn't stop the VI?
    Why is my data logging only outputing one result if I have it to read ever min?
    My wave form graph isnt plotting the temperature results, does it have somthing to do with the while loop?
    I know this is a lot of questions, I'm just trying to solve this and learn from it.
    Attachments:
    TEST RIG 11 10-28-13.vi ‏298 KB

    You took core 1 and 2!!!  Please tell me NI didn't teach it.  I'm not trying to harp on you too bad because I think the instructor is more to blame.  You have many wires going the wrong direction, multple loops doing nothing, and one loop that will never stop so even if all the others did there would be no way to stop your program, a Stop button that is read only once at the start of the application and then is never read again (so stop will never work).  You have the inner loop running forever, but even if it did stop it would run the outer loop forever, your enums should be typedefed, uninitialized shift registers when not needed, dynamic data types, far too many express VIs...ouch.
    To answer your question.  If you have a while loop that needs to run 5 times, why not use a for loop? Then wire a 5 to the N terminal.  If you do have to use a while loop for what ever reason, use the i terminal as a condition to stop.  It will start at 0 and count up so a value of 4 means it will be executing the 5 time.  If the value equals 5 then stop.  Get the Array size of the Listbox and set your for loop to run for each item.
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

  • Is there a way to set markers at the clipping points?

    Hi
    is there a way to set markers at the clipping points?
    thanks

    Don't think you can go any lower than that in any normal design program as there always needs to be a common base reference for all internal calculations like image resizing, font rasterization etc. and traditioanlly it has always been assumed to be 72 DPI. Still, I don't think that it is a problem. Any such stuff no doubt would be handled by the printer driver of the device, meaning it would reinterpret your 72 DPI graphic as 20 DPI and map each "pixel" 1:1. You may just need to design at smaller absolute dimensions...
    Mylenium

  • Is there a way to place the column browser next to the sidebar vertically?

    I updated to the newest itunes and I am thoroughly frustrated trying to navigate it.  Is there any way to place the column browser next to the side bar?  Its really inefficient trying to scroll through it over the library.  Also I want my default interface to be as close to the previous version of itunes as possible (without the Song, Artist, Album, etc headings).  Basically I want the Songs head to be my default when I open itunes, but instead it always sends me to the thumbnails of artists.
    Sorry for the multipart thread, I'm just fedup trying to figure out all these issues myself.

    Take a look at this link, http://osxdaily.com/2012/11/29/5-tips-make-itunes-look-normal/

  • I want to take an iPad 3 on a long trip. Is there any way to back up while I'm on the road?

    I want to take an iPad 3 on a 2-month trip. Is there any way to back up while I'm away from my home computer?

    Your own movies are backed up in the camera roll wich is backed up to iCloud. You should be able to restore the movies if something were to happen to them if you use iCloud for your backups. You would have to purchase more storage from iCloud, but the videos will be backed up
    You get 5GB of free iCloud storage for:
    Photos and videos in the Camera Roll
    Device settings (for example: Phone Favorites, Wallpaper, and Mail, Contacts, Calendar accounts)
    App data
    Home screen and app organization
    Messages (iMessage, SMS, and MMS)
    Ringtones
    Read this
    http://support.apple.com/kb/HT4859

  • Is there any way to cut audio while keeping the video it is tied to?

    ok, I have a video from a dvd i burned on FCE but the sound is messed up. I am going to be making a AMV with it anyway so I don't really need the audio. Is there any way of cutting the audio without disturbing the video it was imported with. I must stress that they were not imported separately.

    Place the footage in the timeline. Click the lock key on the vidoe time line. This will place a screen looking thing over the video. Select the audio in the time line and press delete. That will delete the audio but keep the video. Then unclick the lock key and all should be well. Always remeber the "undo" option if you mess up. I use it all the time.
    Message was edited by: vidoedude

  • Is there a way to lock screen while talking?

    Is there a way to automatically lock the iphone screen when talking? I keep resting the phone on my shoulder while working and I accidently either hang up on people or I end up adding conference calls with people I haven't talked to in years. Its getting pretty embarassing.
    thanks

    You might want to check the sensors which are to the left of the earpiece on the phone when you are looking at the screen. Test it by making a call, and placing your hand over the left portion of the screen, if the screen doesn't turn off, then it would seem that the sensors aren't working. You could try backing up your phone in iTunes and doing a restore to see if that will fix the problem, and if that doesn't you should take it into an Apple store and have them take a look.

Maybe you are looking for