Event ID 1058 Group Policy Preprocessing Error Code 3
You will see this in the event logs, the processing of group policy failed. It is trying to process a policy that doesn't exist. After reading http://technet.microsoft.c the
first resolution Error code 3 (The system cannot find the path specified) lead me to this --> http://support.microsoft.c
4. In the right details pane, double-click DisableDFS.
This entry doesn't exist but if I add it, it works. Problem is solved on machine 1.
Machine 2. This is a brand new Windows 7 setup to investigate this problem because it appears on a lot of the workstations and I have no idea why. Applying this fix did NOT solve the problem. I am a bit stuck. I have new GPs to roll out but they
won't apply with this error in place.
I can ping the logon server just fine and I can get to \\FQDN\sysvol as well. gpupdate /force shows the same error in the event log.
Hi,
Have you tried all steps in the link:
http://support.microsoft.com/kb/314494?
Verify you can read gpt.ini using the full network path, full network path to the gpt.ini as \\<dcName>\SYSVOL\<domain>\Policies\<guid>\gpt.ini where <dcName> is the name of the domain controller,
<domain> is the name of the domain, and <guid> is the GUID of the policy folder.
Please post the full event message for further analysis. In addition, we need to know that what policy did you set that could not be applied.
Regards,
Yan Li
Regards, Yan Li
Similar Messages
-
Group Policy Printer Error (0x80070005 Access Denied)
I am trying the deploy two network printers via group policy using Server 2008 R2 SP1. I created the GPO and added the printers from our print server under computer configuration so that it will apply to the computers, not just the users. After a computer in
the correct OU Gpupdates I recieve the following error in it's application event log:
WARNING: GROUP POLICY PRINTERS
Group Policy object did not apply because it failed with error code 0x80070005 Access is Denied. This error was suppresed.
Any suggestions or thoughts are appreciated. I have been dealing with this error and trying the figure it out for awhile now.Hi,
This issue mostly can be caused due to the incorrect permission settings.
Please try to perform the troubleshooting steps the following Microsoft TechNet blog provides.
Group Policies and Access Denied
http://blogs.technet.com/b/matthewms/archive/2005/10/29/413275.aspx
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Eventlog 1030 group policy update error on Windows 2012 member server
group policy update is failing with event ID 1030
Computer policy is getting applied but User policy Failes. Other windows 2012 servers are successfully updating.
gpupdate /force
Updating policy...
Computer Policy update has completed successfully.
User Policy could not be updated successfully. The following errors were encount
ered:
The processing of Group Policy failed. Windows attempted to retrieve new Group P
olicy settings for this user or computer. Look in the details tab for error code
and description. Windows will automatically retry this operation at the next re
fresh cycle. Computers joined to the domain must have proper name resolution and
network connectivity to a domain controller for discovery of new Group Policy o
bjects and settings. An event will be logged when Group Policy is successful.
To diagnose the failure, review the event log or run GPRESULT /H GPReport.html f
rom the command line to access information about Group Policy results.Hi,
Before going further, I assume that the user account we were using is a domain account. As a result, we can use this account to log onto other domain computers to see if its
user policy settings can be updated successfully.
Besides, for troubleshooting this issue, we can try to retrieve Gpsvc.log to check this issue.
Regarding how to enable logging in the Gpsvc.log file, the following blog can be referred to for more information.
How to enable GPO logging on windows 7 /2008 r2 ?
http://blogs.technet.com/b/csstwplatform/archive/2010/11/09/how-to-enable-gpo-logging-on-windows-7-2008-r2.aspx
Best regards,
Frank Shen -
Hello everybody,
We have a problem since few weeks with printers deployment.
Intermittently, they are not deployed and we have errors 4098 in Event ID with codes :
- '0x8007000a The environment is incorrect'
- '0x8007007a The data area passed to a system call is too small'
- '0x80070005 Access denied'
Our server is a Windows 2008 R2 and clients are Windows7.
We have already read these topics :
http://social.technet.microsoft.com/Forums/windowsserver/en-US/24dfd6c0-b460-40a7-ad18-13e404b361e7/group-policy-printers-dissapearing-from-client-machines-intermittently
It was already enabled (Computer Configuration\Administrative Templates\System\Group Policy\Printers Policy Processing ->
Do not apply during periodic background processing)
http://www.experts-exchange.com/Software/Server_Software/Active_Directory/Q_26220975.html
We have tried to delete printers at logoff but nothing changed.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/7d3809c4-9f36-4412-9c9f-d82614ba3eb9/printers-not-applied-error-4098-0x80070005-access-is-denied
By default we have everybody can print. To be sure, we have added "Domain Computers" but same result.
We have tried to create :
- New GPO to deploy old printers queues => no changes.
- New printers queues and deploy with old GPO => no changes.
- New GPO to deploy new printers queue => no changes.
Our GPO is set like this :
- [Computer configuration/Policies/Administrative Templates/System/Group Policy]
○ Configure printers preference extension policy processing => all enabled
○ Configure user Group Policy loopback processing mode => Merge
- [User configuration/Preferences/Control Panel Settings/Printers/Shared Printer/printername]
○ General => Sharepath
\\server\printername
○ Common => Remove this item when it is no longer applied
In a desperate hope we have reinstall completely some clients but we still have sometimes "Environment is incorrect".
We don't know anymore what to do…
Can you help us please ?Hello,
Do you have installed the latest Microsoft hotfixes on your server / client
KB2537549 - Cannot deploy a printer by using a GPO if read-only domain controllers
are exclusively used in the domain environment in Windows 7 or in Windows Server 2008 R2. This hotfix contains the most current version of PRINTER Group Policy Preferences for Windows 7/2008 Post SP1.
KB2647753 - Update rollup for the printing core components in Windows 7 and
Windows Server 2008 R2.
KB2526028 - Printing performance decreases in Windows 7 or in Windows Server
2008 R2.
KB2618574 - Print Spooler service saves the NetBIOS name of the print server
in Windows 7 or in Windows Server 2008 R2
A list of other post-SP1 hotfixes can be found here...
Links to post
SP1 hotfixes for Windows 7 Service Pack 1
Links
to post SP1 hotfixes for Windows Server 2008 R2 Service Pack 1
List of performance
hotfixes post SP1 for Windows 7 SP1
Jan -
We are running Windows 8.1 Pro x86
I am really curious as to why the drive restriction group policy causes the error message to pop up:
"This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator."
It does not prevent from actual saving so functionality is not lost but it really annoys our end users and we're getting a lot of complaints. We cannot use the workaround of hiding drives instead of restricting as this still presents security issues. This
is happens when saving (or clicking on a button like "Browse" that opens the 'Open' dialogue box) in all Office 2013 applications, Internet Explorer, Paint, Notepad, and probably most others. I've looked at many forums and no suggestions for workarounds
have succeeded for us to get rid of this error message and in fact, I read a post that stated that someone contacted Microsoft and they said this was by design and there is no workaround. I find this very unfortunate that we either have the choice of compromising
security or annoying our end users. It seems to me like the new dialogue box in Windows 8.1 (and maybe 8?) attempts to access the local drive under the logged in user's account before it actually opens up the dialogue box which conflicts with the group policy
that restricts access to the drive.
Has anyone at all had any luck getting this to go away without removing the restrictions? It seems like the answer is either buried in the Windows code or somewhere in the registry.
Thank you in advance for your time!Thank you for your time and response! Unfortunately, we have the machine locked down pretty tight (they are public use computers that require heavy restriction) and it is set to restrict all drives so access is limited to the local profile. We did try
testing your method, however, by adding the Desktop as an allowed location in the Office policy (which would not solve the issue for the other applications but was good for a test) using the path %userprofile%\desktop. When choosing that location, it does
not throw the error but unfortunately, it does not remember like it did for your with the E: drive so it still always throws the error when first loading the dialogue box no matter what I do. If you're able to confirm that this is simply by design and we're
just expected to inform our users to click through the errors, then I guess that's the accepted answer. Although, do you think that there might be a registry key value that is set after you save to the E: drive for the first time? Maybe we could set that value
to %userprofile%\desktop if it's doing the redirection after the first save through registry. Thanks again! -
I am getting the following warning in my Application Log:
Code Snippet
The user '<Printer Name>' preference item in the 'Default Domain Policy {31B2F340-016D-11D2-945F-00C04FB984F9}' Group Policy object did not apply because it failed with error code '0x8007007b The filename, directory name, or volume label syntax is incorrect.' This error was suppressed.
This fires off about every 1.5 hours. Is there a way to root out and stop this warning?
Thanks!It is being reapplied through background refresh, which happens about every 90 minutes. Remove the printer mapping from your Default Domain Policy and you'll stop getting the error message.
-
Recently encountered this error, following some FRS issues with SYSVOL and our NETLOGON folders (event id 13508, if anyone's interested). These replication issues have been resolved, but there is an issue with clients applying group policies. The computer side
of the policy applies every time, no problem. The issue is to do with user policies.
If a user logs on to a machine they were using prior to our replication issues, they receive all the relevant policies and the machine is locked down, as expected. If they log on to a machine they've never logged on to before, they don't receive any user group
policy settings and the event viewer lists error 1053 (with the machine being wide open to their assault).
Event 1053: The processing of Group Policy failed. Windows could not resolve the user name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
Running a gpupdate /force doesn't apply these policies, only presenting this error...
The processing of group policy. Windows could not resolve the user name.
This could be caused by one of the following:
a) Name Resolution failure on the current domain controller - We're quite confident this isn't the problem.
b) Active Directory Replication Latency (An account created on another domain controller has no replicated to the current domain controller) - Checked this, all accounts have been replicated.
Upon producing a GPreport I receive this error:
Group Policy Infrastructure failed due to the error listed below.
The specified account does not exist.
Note: Due to the GP Core failure, none of the other Group Policy components processed their policy. Consequently, status information for the other components is not available.
Additional information may have been logged. Review the Policy Events tab in the console or the application event log for events between 13/11/2014 14:06:30 and 13/11/2014 14:06:32.
System
Provider
[ Name]
Microsoft-Windows-GroupPolicy
[ Guid]
{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}
EventID
1053
Version
0
Level
2
Task
0
Opcode
1
Keywords
0x8000000000000000
TimeCreated
[ SystemTime]
2014-11-14T08:18:32.372783400Z
EventRecordID
59591
Correlation
[ ActivityID]
{C3B036F5-272A-42A7-8AB1-2C2C2DCA0448}
Execution
[ ProcessID]
1100
[ ThreadID]
3000
Channel
System
Computer
XX-XXXX-XX.XXXXXXX.local
Security
[ UserID]
S-1-5-21-4153847986-3925515210-898707684-6794
EventData
SupportInfo1
1
SupportInfo2
1632
ProcessingMode
1
ProcessingTimeInMilliseconds
1544
ErrorCode
1317
ErrorDescription
The specified account does not exist.
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}"
/>
<EventID>1053</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>1</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated
SystemTime="2014-11-14T08:18:32.372783400Z" />
<EventRecordID>59591</EventRecordID>
<Correlation
ActivityID="{C3B036F5-272A-42A7-8AB1-2C2C2DCA0448}" />
<Execution ProcessID="1100" ThreadID="3000" />
<Channel>System</Channel>
<Computer>XX-XXXX-XX.XXXXXXX.local</Computer>
<Security UserID="S-1-5-21-4153847986-3925515210-898707684-6794" />
</System>
<EventData>
<Data Name="SupportInfo1">1</Data>
<Data Name="SupportInfo2">1632</Data>
<Data Name="ProcessingMode">1</Data>
<Data Name="ProcessingTimeInMilliseconds">1544</Data>
<Data Name="ErrorCode">1317</Data>
<Data Name="ErrorDescription">The specified account does not exist.</Data>
</EventData>
</Event>
Any help would be much appreciated.
Thanks,
J.Hi J,
Looks like this could be an access/permissons issue. Could you just confirm a couple of things though:
Use nslookup to
confirm you can resolve addresses of the domain controllers
Use ipconfig /all on a user PC to make sure you are hitting the correct DNS servers
Assuming this is all okay (which I'm sure it is), take a look at
this thread with a similar issue. In the end it was determined that several necessary ports were not open on the DC, which resulted in errors with group policy.
Have a read of that and let us know how you get on. Sorry I can't be of more help at the moment, it feels like this might be a "trial and error" problem!
Regards,
James Henderson
MTA: Windows Server Admin Essentials
MTA: Networking Fundamentals -
We recently switched hardware and server software Win SBS 2008 to 2012R2 for a small network roughly 40 clients (Win7 Pro / Win 8.1 Pro) about 16 running concurrently at a given time and one network printer with the printer queue residing on the DC as well.
I read that a single server environment might not be ideal in particular no fail-over but that is an accepted risk in this particular network here.
Errors:
Error 1043: Timeout during name resolution request
Error 1129: Group policy updates could not be processed due to DC not available
Error 5719: Could not establish secure connection to DC, DC not available
Occasionally but disappears after a while
Error 134: As a result of a DNS resolution timeout could not reach time server
Symptoms
On Win 7 Clients
Network shares added through Group Policy will not show sometimes
Network shares disconnect (red X) and when accessed return access authorization error after one or two clicks on the share finally grant access again
When the issue with accessing network shares occurs, it usually also affects Internet access meaning a 'server not responding' error appears in the browser windows when trying to open just any web page
nslookup during the incident returns cannot resolve error
ipconfig on client shows correct default router (VDSL Router) and DHCP / DNS Domain Controller
Also, the Win system log shows the above errors during these incidents, however, the nuimber of incidents vary from 20-30
On Win 8.1 Clients
Same as above with the slight variation for network shares apparently due to Server 2012 and Win 8.1 clients managing drive shares differently. However, network share refresh does not work with this clients. In most cases only a gpupdate /force returns
drive shares but usually only for the active session. After logoff / logon the shares are gone again.
The issue does appear to be load related since it occurs even if there are only one or two workstations active.
Server Configuration
Dell R320 PowerEdge 16GB / 4TB 7200RPM RAID10 / GBitEthernet
Zyxel 1910-48 Port Switch
VDSL 50Mbps Down / 20Mbps Up
Since the DC is the only local DNS and there are no plans to add another one or move DNS to another server, the DNS server is configured with this own address as preferred DNS with three DNS forwarders 1) VDSL Router 2) ISP DNS1 3) ISP DNS2
Currently only one Network card is active for problem determination reasons.
There appears to be no consensus concerning IPV6 enabled or disabled, I tried both with no apparent effect
I have set all network cards server and client to Full Duplex and the same speed, also disabled Offload functions within the adapter settings. Some but no consistent improvements.
Best Practice Analyzer Results
DNS server scavening not enabled
Root hint server XYZ must respond to NS queries for the root zone
More than one forwarding server should be configured (although 3 are configured)
NIC1 should be configured to use both a preferred and alternate DNS (there is only one DNS in this network)
I have found some instructions to apply changes to the clients through a host file but I would rather like to understand whether this DNS response time issue can be resolved on the server for example timing setting perhaps. Currently the DNS forwarders are
set to 3 second.
Since a few people have reported issues with DNS but most are working with multi DNS, DC environment I could not really apply any suggestions made there. perhaps there is anyone like me who is running a single server who has overcome or experience the same
issues. Any help would be appreciatedHello Milos thx for your reply.. my comments below
1. What does it "switched"? You may mean migration or new installation. We do not know...
>> Switched is probably the incorrect term, replaced would be the appropriate wording. Before, there was a HP Proliant Server with SBS 2008 with distinct domain and now there is a Dell Server with MS 2012 R2 with a distinct domain. Client were
removed from one (SBS) domain and added to the new Server 2012 domain. Other components did not change for example same Network Switch or VDSL Router, Workstations and Printer
2. Two DCs are better alternative. Or backup very frequently. There are two groups of administrators. Those who have lost DC and those who will experience this disaster in near future.
>> Correct, and I am aware of that
3. NIC settings in W 7 and W 8.1, namely DNS points to DC (...and NOTHING else. No public IP or that of router DNS.))
>> Correct, this is how it's currently implemented. Clients point to DC for DHCP and DNS and Default Router, no public IP or DNS. The only references to ISP DNS exist on the VDSL Router itself as provided through ISP when establishing VDSL
Link and the list of Forwarders in the DNS Server configuration. However, I have just recently added the ISPs DNS as forwarders for test purposes and will probably learn tomorrow morning whether this had any effect for better or worse.
4. Do nslookup to RR on clients. RR branch is saying client basic info on LDAP parameters of AD.
>> Will post as soon as available
5. I do not use forwarders and the system works
>> Ok, does this mean it works for you in a similar or the same infrastructure setup or are you saying it is not required at all and I can remove any forwarder in a scenario like mine? If not required can you explain a bit more why it is not
required apart from that it does work for you that way?
6. DHCP should sit on DC (DHCP on router is disabled)
>> Correct, no other device is configured to provide DHCP service other than DC and DHCP is currently running on DC
7. NIC settings in DC points to itself (loopback address 127.0.0.1)
>> Are you sure this is still correct and does apply to Server 2012? I am reading articles stating that it should be the servers own IP but local loop or should this be added as alternate DNS in addition to the servers own IP?
8. Use IPCONFIG /FLUSHDNS whenever you change DNS settings.
>> OK, that was not done every time I changed some settings but I can do that next week. Reboot alone would not suffice, correct?
9. Test your system with dcdiag.
>> See result below
10. Share your findings.
Regards
Milos
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = GSERVER2
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\GSERVER2
Starting test: Connectivity
......................... GSERVER2 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\GSERVER2
Starting test: Advertising
......................... GSERVER2 passed test Advertising
Starting test: FrsEvent
......................... GSERVER2 passed test FrsEvent
Starting test: DFSREvent
......................... GSERVER2 passed test DFSREvent
Starting test: SysVolCheck
......................... GSERVER2 passed test SysVolCheck
Starting test: KccEvent
......................... GSERVER2 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... GSERVER2 passed test
KnowsOfRoleHolders
Starting test: MachineAccount
......................... GSERVER2 passed test MachineAccount
Starting test: NCSecDesc
......................... GSERVER2 passed test NCSecDesc
Starting test: NetLogons
......................... GSERVER2 passed test NetLogons
Starting test: ObjectsReplicated
......................... GSERVER2 passed test
ObjectsReplicated
Starting test: Replications
......................... GSERVER2 passed test Replications
Starting test: RidManager
......................... GSERVER2 passed test RidManager
Starting test: Services
......................... GSERVER2 passed test Services
Starting test: SystemLog
......................... GSERVER2 passed test SystemLog
Starting test: VerifyReferences
......................... GSERVER2 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : GS2
Starting test: CheckSDRefDom
......................... GS2 passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... GS2 passed test CrossRefValidation
Running enterprise tests on : GS2.intra
Starting test: LocatorCheck
......................... GS2.intra passed test LocatorCheck
Starting test: Intersite
......................... GS2.intra passed test Intersite
Server: gserver2.g2.intra
Address: 192.168.240.6
*** gserver2.g2.intra can't find g2: Non-existent domain
> gserver2
Server: gserver2.g2.intra
Address: 192.168.240.6
g2.intra
primary name server = gserver2.g2.intra
responsible mail addr = hostmaster.g2.intra
serial = 443
refresh = 900 (15 mins)
retry = 600 (10 mins)
expire = 86400 (1 day)
default TTL = 3600 (1 hour)
> wikipedia.org
Server: gserver2.g2.intra
Address: 192.168.240.6
Non-authoritative answer:
wikipedia.org MX preference = 10, mail exchanger = polonium.wikimedia.org
wikipedia.org MX preference = 50, mail exchanger = lead.wikimedia.org
polonium.wikimedia.org internet address = 208.80.154.90
polonium.wikimedia.org AAAA IPv6 address = 2620:0:861:3:208:80:154:90
lead.wikimedia.org internet address = 208.80.154.89
lead.wikimedia.org AAAA IPv6 address = 2620:0:861:3:208:80:154:89
Final benchmark results, sorted by nameserver performance:
(average cached name retrieval speed, fastest to slowest)
192.168.240. 6 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
+ Cached Name | 0,001 | 0,002 | 0,003 | 0,001 | 100,0 |
+ Uncached Name | 0,027 | 0,076 | 0,298 | 0,069 | 100,0 |
+ DotCom Lookup | 0,041 | 0,048 | 0,079 | 0,009 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
gserver2.g2.intra
Local Network Nameserver
195.186. 4.162 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name | 0,022 | 0,023 | 0,025 | 0,000 | 100,0 |
- Uncached Name | 0,025 | 0,071 | 0,274 | 0,065 | 100,0 |
- DotCom Lookup | 0,039 | 0,040 | 0,043 | 0,001 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
cns8.bluewin.ch
BLUEWIN-AS Swisscom (Schweiz) AG,CH
195.186. 1.162 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name | 0,022 | 0,023 | 0,026 | 0,001 | 100,0 |
- Uncached Name | 0,025 | 0,072 | 0,299 | 0,066 | 100,0 |
- DotCom Lookup | 0,039 | 0,042 | 0,049 | 0,003 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
cns7.bluewin.ch
BLUEWIN-AS Swisscom (Schweiz) AG,CH
8. 8. 8. 8 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name | 0,033 | 0,040 | 0,079 | 0,011 | 100,0 |
- Uncached Name | 0,042 | 0,113 | 0,482 | 0,097 | 100,0 |
- DotCom Lookup | 0,049 | 0,079 | 0,192 | 0,039 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
google-public-dns-a.google.com
GOOGLE - Google Inc.,US
UTC: 2014-11-03, from 14:33:12 to 14:33:29, for 00:17,648
15: 40
192.168.240. 6 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
+ Cached Name | 0,001 | 0,002 | 0,004 | 0,000 | 100,0 |
+ Uncached Name | 0,025 | 0,074 | 0,266 | 0,063 | 100,0 |
+ DotCom Lookup | 0,042 | 0,048 | 0,075 | 0,007 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
gserver2.g2.intra
Local Network Nameserver
195.186. 1.162 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name | 0,022 | 0,024 | 0,029 | 0,001 | 100,0 |
- Uncached Name | 0,024 | 0,073 | 0,289 | 0,067 | 100,0 |
- DotCom Lookup | 0,039 | 0,041 | 0,043 | 0,001 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
cns7.bluewin.ch
BLUEWIN-AS Swisscom (Schweiz) AG,CH
195.186. 4.162 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name | 0,022 | 0,024 | 0,029 | 0,001 | 100,0 |
- Uncached Name | 0,025 | 0,073 | 0,286 | 0,065 | 100,0 |
- DotCom Lookup | 0,041 | 0,066 | 0,180 | 0,037 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
cns8.bluewin.ch
BLUEWIN-AS Swisscom (Schweiz) AG,CH
8. 8. 8. 8 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name | 0,033 | 0,038 | 0,077 | 0,009 | 100,0 |
- Uncached Name | 0,042 | 0,105 | 0,398 | 0,091 | 100,0 |
- DotCom Lookup | 0,049 | 0,066 | 0,141 | 0,025 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
google-public-dns-a.google.com
GOOGLE - Google Inc.,US
UTC: 2014-11-03, from 14:39:59 to 14:40:12, for 00:13,363 -
Hi All
I am trying to create a shortcut via GP to point to our print server, so people can connect to optional printers. we have the following settings set in the policy.
Action Create
Type: File System Object
Path: Desktop
Target: "\\server"
Icon Path: C:\Windows\System32\imageres.dll
Icon index: 48
Shortcut Key: none
Run: normal window
But this is not working and is throwing the following error in a gpresult: Result: Failure (Error Code: 0x80070002)
Does anyone have any ideas why this is happening?
Thanks,
RichardPlease edit the policy as a "Shell Object".
http://technet.microsoft.com/en-us/library/cc753580.aspx
Alper YAZGAN * -
Hello
When i want to get Group policy Results for one Computer in Domain came out this error: (Environment win2k8 and win7)Hi Amir,
>>When i want to get Group policy Results for one Computer in Domain came out this error
Before going further, we can try to run command gpresult/h gpreport.html
with admin privileges on the computer to see if we can successfully collect group policy result.
Best regards,
Frank Shen -
Policy agent error code 21 after authenticating
Hi,
I get the following error in my amAgent logs after successfully authenticating to Sun Policy Manager 7.1:
PolicyEngine: am_policy_evaluate: InternalException in AuthService::submitRequirements() with error message:Error sending client submitted requirements to server. and code:21
A 500 Internal Server Error page is returned with the message: This server has encountered an internal error which prevents it from fulfilling your request. The most likely cause is a misconfiguration. Please ask the administrator to look for messages in the server's error log.
The Policy Manager auth access log shows: "Login Success" for the login attempt.
My configuration:
Solaris 10
Apache 2.0.54
Sun Java System Access Manager Policy Agent 2.2
Has anyone seen or experienced this error before?
Thanks
Edited by: tutro on Aug 7, 2008 7:31 AMA control character was being read from the password (even though both the encrypted and unencrypted password did not contain any control characters). A password reset resolved the issue.
-
To get some errors about group policy due to disabled an account
Hello
I have an active directory on windows 2012 datacenter. there is a domain on it. it works well.
Also there is a another AD on another location. there is another domain on it. also it works too.
there is a trust relationship between 2 domains.
I disabled an account on first AD server 4 days ago. and then my colleague who manages second AD, notified that started to recieve some errors from eventviewer and have an issue about their group policy.
the issue event as below;
The processing of Group Policy failed. Windows could not authenticate to the Active Directory service on a domain controller
(LDAP Bind function call failed). Look in the details tab for error code and description.
Event ID 1006
Event Source Group Policy
I think the concerning account was built on the second AD for a service. But we don't know how we can find the account on the second AD server in order to change it.
How can I fix the issue?
ThanksHi Yavuz,
>>But we don't know how we can find the account on the second AD server in order to change it.
What account did we disable? We can check the error code (displayed as a decimal) and error description fields of Event ID 1006 to see if more information can be found.
Regarding Event ID 1006, the following article can be referred to for more information.
Event ID 1006 — Group Policy Preprocessing (Active Directory)
https://technet.microsoft.com/en-us/library/cc727283(v=ws.10).aspx
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Group Policy processing failure on 2008 when MIX Domain 2003 with DC 2008
Dear I try to add additional Windows 2008 Domain to My Domain controller 2003 and I ma Receiving Group policy error in DC 2008 With Event ID 1055
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" />
<EventID>1055</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>1</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-03-06T14:36:44.411955300Z" />
<EventRecordID>3859</EventRecordID>
<Correlation ActivityID="{28DAD258-26D0-4C1E-A4B7-F37DEE04C8F1}" />
<Execution ProcessID="952" ThreadID="3276" />
<Channel>System</Channel>
<Computer>PRIMARYDC.Qtit.com</Computer>
<Security UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="SupportInfo1">1</Data>
<Data Name="SupportInfo2">1632</Data>
<Data Name="ProcessingMode">0</Data>
<Data Name="ProcessingTimeInMilliseconds">1578</Data>
<Data Name="ErrorCode">5</Data>
<Data Name="ErrorDescription">Access is denied.</Data>
</EventData>
</Event>
I install See KB939820 for a hotfix applicable to Microsoft DC 2003 regrading to he KRBTGT account
Refer Url : http://support.microsoft.com/kb/939820
I run dcdiag /v on and repadmin /showrepl at DC 2008
the dcdiag /v result
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine PRIMARYDC, is a Directory Server.
Home Server = PRIMARYDC
* Connecting to directory service on server PRIMARYDC.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=Qtit,DC=com,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=Qtit,DC=com,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=SECONDAD,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=PRIMARYDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 2 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\PRIMARYDC
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... PRIMARYDC passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\PRIMARYDC
Starting test: Advertising
The DC PRIMARYDC is advertising itself as a DC and having a DS.
The DC PRIMARYDC is advertising as an LDAP server
The DC PRIMARYDC is advertising as having a writeable directory
The DC PRIMARYDC is advertising as a Key Distribution Center
The DC PRIMARYDC is advertising as a time server
The DS PRIMARYDC is advertising as a GC.
......................... PRIMARYDC passed test Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
A warning event occurred. EventID: 0x800034C8
Time Generated: 03/06/2014 10:18:56
Event String:
The File Replication Service has detected an enabled disk write cache on the drive containing the directory c:\windows\ntfrs\jet on the computer PRIMARYDC. The File Replication Service might not recover when power to
the drive is interrupted and critical updates are lost.
A warning event occurred. EventID: 0x800034C8
Time Generated: 03/06/2014 10:53:21
Event String:
The File Replication Service has detected an enabled disk write cache on the drive containing the directory c:\windows\ntfrs\jet on the computer PRIMARYDC. The File Replication Service might not recover when power to
the drive is interrupted and critical updates are lost.
......................... PRIMARYDC passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
Skip the test because the server is running FRS.
......................... PRIMARYDC passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... PRIMARYDC passed test SysVolCheck
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... PRIMARYDC passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=SECONDAD,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
Role Domain Owner = CN=NTDS Settings,CN=SECONDAD,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
Role PDC Owner = CN=NTDS Settings,CN=SECONDAD,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
Role Rid Owner = CN=NTDS Settings,CN=SECONDAD,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
Role Infrastructure Update Owner = CN=NTDS Settings,CN=SECONDAD,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
......................... PRIMARYDC passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC PRIMARYDC on DC PRIMARYDC.
* SPN found :LDAP/PRIMARYDC.Qtit.com/Qtit.com
* SPN found :LDAP/PRIMARYDC.Qtit.com
* SPN found :LDAP/PRIMARYDC
* SPN found :LDAP/PRIMARYDC.Qtit.com/QTIT
* SPN found :LDAP/e3d8c76c-1b59-4de6-9f7f-c438df9a2863._msdcs.Qtit.com
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/e3d8c76c-1b59-4de6-9f7f-c438df9a2863/Qtit.com
* SPN found :HOST/PRIMARYDC.Qtit.com/Qtit.com
* SPN found :HOST/PRIMARYDC.Qtit.com
* SPN found :HOST/PRIMARYDC
* SPN found :HOST/PRIMARYDC.Qtit.com/QTIT
* SPN found :GC/PRIMARYDC.Qtit.com/Qtit.com
......................... PRIMARYDC passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC PRIMARYDC.
The forest is not ready for RODC. Will skip checking ERODC ACEs.
* Security Permissions Check for
DC=ForestDnsZones,DC=Qtit,DC=com
(NDNC,Version 3)
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=ForestDnsZones,DC=Qtit,DC=com
* Security Permissions Check for
DC=DomainDnsZones,DC=Qtit,DC=com
(NDNC,Version 3)
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=DomainDnsZones,DC=Qtit,DC=com
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=Qtit,DC=com
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=Qtit,DC=com
(Configuration,Version 3)
* Security Permissions Check for
DC=Qtit,DC=com
(Domain,Version 3)
......................... PRIMARYDC failed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\PRIMARYDC\netlogon
Verified share \\PRIMARYDC\sysvol
......................... PRIMARYDC passed test NetLogons
Starting test: ObjectsReplicated
PRIMARYDC is in domain DC=Qtit,DC=com
Checking for CN=PRIMARYDC,OU=Domain Controllers,DC=Qtit,DC=com in domain DC=Qtit,DC=com on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=PRIMARYDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com in domain CN=Configuration,DC=Qtit,DC=com on 1 servers
Object is up-to-date on all servers.
......................... PRIMARYDC passed test ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=Qtit,DC=com
Latency information for 18 entries in the vector were ignored.
18 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=Qtit,DC=com
Latency information for 18 entries in the vector were ignored.
18 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=Qtit,DC=com
Latency information for 20 entries in the vector were ignored.
20 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=Qtit,DC=com
Latency information for 20 entries in the vector were ignored.
20 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=Qtit,DC=com
Latency information for 20 entries in the vector were ignored.
20 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
* Replication Site Latency Check
......................... PRIMARYDC passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 14607 to 1073741823
* SecondAD.Qtit.com is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 14107 to 14606
* rIDPreviousAllocationPool is 14107 to 14606
* rIDNextRID: 14124
......................... PRIMARYDC passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... PRIMARYDC passed test Services
Starting test: SystemLog
* The System Event log test
A warning event occurred. EventID: 0x0000A001
Time Generated: 03/06/2014 16:04:05
Event String:
The Security System could not establish a secured connection with the server ldap/PRIMARYDC.Qtit.com/[email protected]. No authentication protocol was available.
An error event occurred. EventID: 0x0000041F
Time Generated: 03/06/2014 16:06:35
Event String:
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
An error event occurred. EventID: 0x0000041F
Time Generated: 03/06/2014 16:11:36
Event String:
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
An error event occurred. EventID: 0x0000041F
Time Generated: 03/06/2014 16:16:38
Event String:
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
An error event occurred. EventID: 0x0000041F
Time Generated: 03/06/2014 16:21:39
Event String:
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
An error event occurred. EventID: 0x0000041F
Time Generated: 03/06/2014 16:26:41
Event String:
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 16:30:46
Event String:
Driver TOSHIBA e-STUDIO16/20/25 PCL 6 required for printer TOSHIBA e-STUDIO16/20/25 PCL 6 is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 16:30:48
Event String:
Driver Microsoft XPS Document Writer v4 required for printer Microsoft XPS Document Writer is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 16:30:49
Event String:
Driver Send to Microsoft OneNote 15 Driver required for printer Send To OneNote 2013 is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 16:31:14
Event String:
Driver Send to Microsoft OneNote 15 Driver required for printer Send To OneNote 2013 is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 16:31:16
Event String:
Driver Microsoft XPS Document Writer v4 required for printer Microsoft XPS Document Writer is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 16:31:16
Event String:
Driver WebEx Document Loader required for printer WebEx Document Loader is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x0000041F
Time Generated: 03/06/2014 16:31:42
Event String:
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
......................... PRIMARYDC failed test SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=PRIMARYDC,OU=Domain Controllers,DC=Qtit,DC=com and backlink on
CN=PRIMARYDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
are correct.
The system object reference (serverReferenceBL)
CN=PRIMARYDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=Qtit,DC=com
and backlink on
CN=NTDS Settings,CN=PRIMARYDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
are correct.
The system object reference (frsComputerReferenceBL)
CN=PRIMARYDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=Qtit,DC=com
and backlink on CN=PRIMARYDC,OU=Domain Controllers,DC=Qtit,DC=com are
correct.
......................... PRIMARYDC passed test VerifyReferences
Test omitted by user request: VerifyReplicas
Test omitted by user request: DNS
Test omitted by user request: DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : Qtit
Starting test: CheckSDRefDom
......................... Qtit passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Qtit passed test CrossRefValidation
Running enterprise tests on : Qtit.com
Test omitted by user request: DNS
Test omitted by user request: DNS
Starting test: LocatorCheck
GC Name: \\PRIMARYDC.Qtit.com
Locator Flags: 0xe00031fc
PDC Name: \\SecondAD.Qtit.com
Locator Flags: 0xe00001bd
Time Server Name: \\PRIMARYDC.Qtit.com
Locator Flags: 0xe00031fc
Preferred Time Server Name: \\PRIMARYDC.Qtit.com
Locator Flags: 0xe00031fc
KDC Name: \\PRIMARYDC.Qtit.com
Locator Flags: 0xe00031fc
......................... Qtit.com passed test LocatorCheck
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... Qtit.com passed test Intersite
repadmin /showrepl Result
******************************8
==== INBOUND NEIGHBORS ===================================
DC=Qtit,DC=com
Default-First-Site-Name\SECONDAD via RPC
DSA object GUID: c5ef6e17-77f0-43f6-8d39-5497c563f
Last attempt @ 2014-03-06 16:41:04 was successful.
CN=Configuration,DC=Qtit,DC=com
Default-First-Site-Name\SECONDAD via RPC
DSA object GUID: c5ef6e17-77f0-43f6-8d39-5497c563f
Last attempt @ 2014-03-06 16:41:39 was successful.
CN=Schema,CN=Configuration,DC=Qtit,DC=com
Default-First-Site-Name\SECONDAD via RPC
DSA object GUID: c5ef6e17-77f0-43f6-8d39-5497c563f
Last attempt @ 2014-03-06 15:53:01 was successful.
DC=DomainDnsZones,DC=Qtit,DC=com
Default-First-Site-Name\SECONDAD via RPC
DSA object GUID: c5ef6e17-77f0-43f6-8d39-5497c563f
Last attempt @ 2014-03-06 16:27:31 was successful.
DC=ForestDnsZones,DC=Qtit,DC=com
Default-First-Site-Name\SECONDAD via RPC
DSA object GUID: c5ef6e17-77f0-43f6-8d39-5497c563f
Last attempt @ 2014-03-06 15:53:01 was successful.
I try to down the DC 2003 and access \\Qtit.com it success open the syslog on DC 2008
Any help or adviceHi,
Were there other error codes logged in Event Viewer?
Regarding Event ID 1055, the following article can be referred to for troubleshooting.
Event ID 1055 — Group Policy Preprocessing (Security)
http://technet.microsoft.com/en-us/library/cc727272(v=ws.10).aspx
Based on the report you posted, this issue may be related to FRS replication service. As a result, we can use ntfrsutl tool to check whether the replication service is healthy.
Regarding this point, the following articles can be referred to for more information.
Troubleshooting File Replication Service
http://technet.microsoft.com/en-us/library/bb727056.aspx
Ntfrsutl
http://technet.microsoft.com/en-us/library/hh875636.aspx
In addition, we can also try doing a non-authoritative Sysvol restore on Windows Server 2008 DC to see whether the issue persists.
Using the BurFlags registry key to reinitialize File Replication Service replica sets
http://support.microsoft.com/kb/290762/en-us
Hope it helps.
Best regards,
Frank Shen -
Slow logins to domain, several event ID errors (group policy, netlogon, NTP errors)
We have a laptop user who was experiencing slow logons in a remote office. (Remote office has 100 users, only 1 is reporting the issue). Helpdesk swapped computers to give the user brand new hardware. The new laptop worked
fine while in the IT department in the main office, the user returned to their desk in their remote office after replacing the laptop and logged in and experienced the same slow logon issues as the older laptop.
Logons take up to 45 mins to process. (Login script hangs and does not process). During the process, you can check IPConfig and it received the proper DNS settings. you can ping the authenticating server by name. We have scanning
on our local copiers setup to scan to the users desktop, and this errors out. DNS on the AD controller shows the proper IP address for the machine and you can ping the machine by name.
System Event log is loaded with errors:
Event ID 5719 - Netlogon, computer not able to setup a secure session with a domain controller in the domain
Event ID 1129 - Group Policy, processing of Group Policy failed because of lack of network connectivity
Event ID 129 - Time Service, NTP Client was unable to set a domain peer to use as a time source
Event ID 5783 - NetLogon, The session setup to the WIndows NT or 2000 domain controller (xxx) for the domain is not responsive. RPC call cancelled. (NOTE - you can ping this domain controller by name and by IP with no issues)
Event ID 130 - Time-Service, NTP client unable to set a domain peer
All these seem to point to RPC errors timing out because they cannot communicate to the network resources. The problem happens on wired or wireless connections. We had the user move to a different network connection (one we know is working for
another user) the problem persists. The problem was on the original computer and continues to happen even after replacing the hardware with a brand new laptop.
I have tried running the following hotfix. Which does not resolve the issue:
http://support2.microsoft.com/kb/2459530 which technically this shouldn't be an issue because we use DHCP off the 2003 AD domain controller.
I have checked the domain controller, AD Replication is processing with no issues. DNS is working. The local DHCP server has no issues or events related to this account and neither does the local DNS server or the authenticating server (which
is in another remote office).
Hi,
As we know, most of the time error event 5719 is caused by network connectivity issues or name resolution issue, I suggest you refer to this link to make a further analysis
http://blogs.technet.com/b/instan/archive/2008/09/18/netlogon-5719-and-the-disappearing-domain.aspx
And this link:
Root Causes for Slow Boots and Logons
http://social.technet.microsoft.com/wiki/contents/articles/10130.root-causes-for-slow-boots-and-logons-sbsl.aspx
Yolanda Zhu
TechNet Community Support -
Event viewer subscriptions error code 0x32
I’m using windows 7 home premium trying to configure event viewer subscriptions.
But getting error code (0x32) .
[hadi-TOSH] -
Error - Last retry time: 4/9/2014 6:28:35 PM. Code (0x32): <f:ProviderFault provider="Event Forwarding Plugin" path="%systemroot%\system32\wevtfwd.dll" xmlns:f="http://schemas.microsoft.com/wbem/wsman/1/wsmanfault"><t:ProviderError
xmlns:t="http://schemas.microsoft.com/wbem/wsman/1/windows/EventLog">Windows Event Forward Plugin failed to create subscription.</t:ProviderError></f:ProviderFault>
Next retry time: 4/9/2014 7:08:35 PM.Hi,
Please make sure the Windows Event Collector service is started. You must be a member of the Administrators group to start this service.
http://technet.microsoft.com/en-us/library/cc748890.aspx
Kate Li
TechNet Community Support
Maybe you are looking for
-
My iPhone 5 keeps freezing when I connect to wifi, not just freeze the wifi, but freezes the whole phone and have to hold home and lock button. Locks up completely and instantly when I turn on wifi and connect. Solutions?
-
Trouble importing AVCHD clips from camera
Yesterday I was using my Canon Vixia HG20 to record AVCHDclips, which records it in a .cpi file. Although I'm unable to play them onQuickTime, I was able to import them through Final Cut Pro X by using "ImportFrom Camera". Then I was able to edit the
-
TS4062 Sync Iphone 4 to New Ipad without usb
How do I sync an iphone 4 to a new ipad with out a USB connection. I have a wi fi connection but online instructions say to first connect via usb and the new ipad does not have a usb port.
-
Is there any update on the proposed release of the javascript API for post Forms 9.0.4 ? thanks Andrew
-
Hi Guys, any one can exaplain how XBRL supports in OBIEE. Thanks in Adavance.