Is there a way to see or play two video tracks at the same time?

I have video shot using two cameras at the same event. If I take the video and put it in a sequence, say video1 and video2, how can I watch both tracks at the same time so I can edit them? I tried using multi-camera monitor and have that show video1, while watching video2 in the right hand panel, but it doesn't work very well. By that, I mean the multi-camera monitor does not play at the same time. Instead, it stops, then when I play the other monitor it is still until I stop the other one. Then, it "catches up". If I play the multi-monitor, the other one is still until I stop the multi-cam monitor. So, anybody have a better solution that I can use where they both play at the same time?
BTW, my hardware is brand new and I have a 6-core i7-3930K processor with 16 GB of memory, so I don't believe the problem is with my hardware not being enough to run PPro 5.0 correctly.

"adobe multicam tutorial"
http://tv.adobe.com/watch/short-and-suite/multicam-sync-and-editing/

Similar Messages

Play two video files at the same time.

I am trying to play two video files at the same time. I create two threads, each of which has its own frame, playing button, and builds its own graph to play the file. Now everything seems works except that when the first file is being played and I hit PLAY
to play the second file, the program plays the second file but the first one is paused; furthermore the control button has no response for the first one. Did I miss anything? Can anyone help me figure out the problem?
Best,
Fayin

You don't need separate threads for 2+ playback pipelines because the filters create worker threads internally and don't block execution on calling thread.
If you decide to keep separate threads, you will have to follow Michel's advice and have message pumps on those threads.
You can also have both files in the same graph, in which case you have perfect sync between them (both start playing together in sync), however you cannot pause/stop/run files separately.
The problem you described is most likely not a DirectShow problem and is rather about generic threading, COM or window messaging.
http://alax.info/blog/tag/directshow

I had ordered a photo book print two years back. I want to reorder the same book again now. However, I have lost the album project in iphoto. Is there any way to see my print order history and reorder the same book for print ?

I had ordered a photo book print two years back. I want to reorder the same book again now. However, I have lost the album project/photos from iphoto.
Is there any way to see my print order history and reorder the same book for print ?

No. Apple only keeps the pdf file for a book for 30 days. Without the library and book project you won't be able to reorder the same book.
Even though the horse is out of the barn the following tutorial might be of help for future books, i.e. create a new library for each book): iP08 - Archiving an iPhoto Book for Editing and/or Ordering at a Later Date
OT

Is there a way to view different portions of a document at the same time?

Is there a way to view different portions of a document at the same time?

No. I suggest you leave feedback for the Pages team regarding this. You can find it under the Pages menu > Provide Pages Feedback. That takes you to the same page as this link.

Is there a way to "Quit" all running apps in dock at the same time verses right-clicking each one individually?

Is there a way to "Quit" all running apps in dock at the same time verses right-clicking each one individually?

IIRC, OPTION-click on the Apple icon on the menu bar and select either Restart or Shutdown. Alternatively,
Control-Command-Eject
Quit all applications (after giving you a chance to save changes to open documents), then restart the computer
Control Option-Command-Eject
Quit all applications (after giving you a chance to save changes to open documents), then shut down the computer

HT204380 Is there any way to "FaceTime " between 3 or 4 users at the same time?

Is there any way to "FaceTime " between 3 or 4 users at the same time?

No. FaceTime is one on one only.

Every time i play a song in my i-tune 10.6, about up to half way mark, i-tune will automatically skip to the next track and playing it (next track) at the same time as the current track.

Every time i play a song in my i-tune 10.6, about up to half way mark, i-tune will automatically skip to the next track and playing it (next track) at the same time as the current track. i don't know if anyone has the same problem, but i haven't sync my ipod touch 4 gen to my i-tune playlist for the longest time, cus i was afraid to transfer the problem to it since i have a pc (win 7) but not MAC.

i am sorry, guys, but I really really really need you guys' help. if u know ANYTHING...

Why cant I see BOTH video tracks at the same time?

I read all the manuals,I swear.
I make film collage and want to do multiple layer exposures of different clips.
So far I just have two video tracks-
Why cant I see BOTH video tracks at the same time,I mean each track will create another layer,or exposure that will both play back viewable simultaneously right ?Or would that be considered "layering"?
Does this have anything to do with the source vs. destination thing ?

FCE plays back video tracks in a "top-down" manner: that is what's on track 3 obscures what's on track 2 which obscures what's on track 1. You can control scale, position and opacity of each clip on each track so that you can get the layering you seem to be after.

Seeing multiple video tracks at the same time?

I'm using Final Cut Pro 5.1.4 and I have two video tracks on the time line. 2 different angles of the same object. I want to sync the audio and what not correctly. I'm wondering if there is a way to be able to do like a "split screen" on the Canvas so I can see video track 1 on the left and video track 2 on the right (or vice versa)?? If so..help! lol, thanks!
GC

You have a few options available to you.
1) You could use FCP's built in Multiclip functionality
2) You could set the Playhead Sync to Gang
3) You could Scale and Center controls in the clip's motion properties to temporarily place the fooatge side by side whilst you edit.
Check your manual for details on these options, then post back.
Best
Andy

Is there a way to open different books on various apps at the same time like in android devices?

hello good peolpe, i bought an ipad mini retina for books reading and i would like to know if there is a way i can open a book with different apps like i do on android device where you can use various apps to open differents books at the same time, i would like to also know if there is a way to do the same thing but with power point and word files, and how can i open them on my ipad and transfer them, thanks every one for their time

Currently you can't. Maybe in iOS 8 that will be released soon.
 Cheers, Tom

Is there any way to use bluetooth and force audio out at the same time?

I have an older treadmill that uses IFit which means a program on my phone controls my treadmill via an aux audio cable. I like using BT headphones so I don't have cords hanging. So...I'm trying to figure some way to either a) have iphone connected physically to treadmill but bt'ing music to my headphones at the same time or b) get iphone to communicate with two different bt devices simultaneously. (Treadmill can also be controlled via BT, but I still need the BT for headphones)
Any ideas would be great. I currently have cable running from treadmill to iphone and headphones via a splitter but it's a LOT of cord hanging which makes things difficult.

No. FaceTime is one on one only.

Is there a way to stream/publish RTMP, HDS, and HLS at the same time?

Can I stream/publish all methods at the same time? I really want most users to play my live streams via RTMP, however, fail over to HLS for Apple iOS.

For your first problem, probably you need to insert something like this in your webpage to detect whether your webpage is being accessed from i-device or not..
if((navigator.userAgent.match(/iPhone/i)) || (navigator.userAgent.match(/iPod/i)))
deviceType = "iphone";
And it that is true, you may load following HTML in your video frame..
<head>
<body>
<center>
<video src="http://your-server:8134/hls-live/livepkgr/_definst_/liveevent/livestream1.m3u8" controls autoplay /> // HLS m3u8 url as src
</center>
</body>
</head>
otherwise if it Flash based device, load the osmf player .. with URL of .f4m (for HDS)
In case you want to serve on RTMP, load something like sample video player
sample index.html shipped with FMS in webroot folder may help you in this..

Playing two midi keyboards at the same time in logic for live show

hello, i have a macbook pro 2.16 cpu, os 10.4.7, logic 7.1.1 and 7.2 is on the way
1 gb of ram
a tascma us-428 inerface
i want to be able to play two diffrent midi keyboards at the same time is their a way to have one digital instrament for on keyboard, and another midi keyboard on a diffrent digital instrament at the same time, so as to play a live show?
and also if i want to chang the intrament in the middle of a song becase it switches half way throw the song, is it posble to atomate this switch insted of doing it by hand? please help! thank you.

here is some good reading regarding patch change
http://discussions.apple.com/thread.jspa?messageID=2931940&#2931940
http://discussions.apple.com/thread.jspa?messageID=1993033&#1993033
http://www.logicprohelp.com/viewtopic.php?t=1045&highlight=instrumentprogram+programmechange

Playing two FLV's at the same time

Hello,
OK, this seems like it would be simple, but I cannot get it
to work. I have 2 flv's that have to play at the same time - one is
a prof. in front of a electronic microscope and the other is the
actual feed from the microscope - so I need them to be able to be
controlled by one set of components. So, I have tried everything in
my ability. Currently, the setup is as follows:
I have 4 layers
Actions - where this script resides
myVideo.playPauseButton=myPlayButton;
myVideo.seekBar=mySeekBar;
myVideo.volumeBar=myVolumeBar;
Player - play/pause, seek, and volume bar reside
Scope - FLV of microscope
TH - FLV of talking head
Both my Flv's have an instance name of "myVideo" and when I
test the swf, only the last layer plays and is controlled (if the
Talking Head is in the last layer that will play and vice versa).
I cannot figure out, nor find anything, anywhere on how to
control both these FLVs with only one comonent.
Any help would be appreciated.
Thanks much
Jason

Playing more than one FLV will result in more than one
NetStream object. Each NetStream object plays independently. Add to
that each progressively downloads separately so one may begin
playing before the other. Attempts to seek a point in the videos
will also be unpredictable unless cue points where added during
encoding. But then playing from the cue point is unpredictable.
The best plan for video like this might be shorter lengths or
combining into one.
You can combine the raw video files in Premier or Windows
MovieMaker and then publish and then encode one FLV.

Is there a way to restore more than one MacBook Pro at the same time from an image? .

I restore each MacBook Pro one at a time from an Mountain Lion image on a firewire Hard Drive but each MacBook has to be done one at a time. When I re-image the PC's here at work I'm able to Ghost as many laptops I want simultaneously.
Thank you

They are a few different models of the MacBook Pro ranging from 15.4" i7's to 17" i7's. I would use the same models together though when imaging them just like I do with PC's. For example I would Ghost 5 Lenovo T420 Thinkpads at the same time which all share the same exact specs and config. Looking to do the same with the MBP. I have .dmg image of OSX 10.8.1 on a firewire drive which I'm using. I image all my MBP's with this drive, the only downside is I have to do each MBP one at a time.
Thanks

Is there a way to see or play two video tracks at the same time?

Similar Messages

Maybe you are looking for