Is there a way to set Adobe Reader X and Internet Explorer 10 integration on and off per website URL?

We have a Citrix environment where some web applications require pdf browser page integration, and others need the .pdf to open in reader itself.
thanks for any input.

Thank you t quinn for your reply as I do really appreciate the help.
I don't quite understand what your suggestion was and before I try to figure it out and play around with numbers, I thought I should clarify further. When i wrote I want to paste the content into the cell and have it limited to 100 characters I was mis-spoken. I actually have all the content already in the columns in a spreadsheet and would now like to just limit some of the columns to hold only 100 characters in a cell so that when its a CSV file it will be accepted to the program I'm trying to upload it to.
SO does that change the way you can answer my question?
Is there a way to just limit the content currently in a spreadsheet to 100 characters per cell?
Kindly

Similar Messages

I typed in data into the highlighted text box, and then tried to print my form. However, when printed, the copy only showed a portion of my answer. Is there a way to expand Adobe Reader's highlighted text to show my full response, or should I make my re

I typed in data into the highlighted text box, and then tried to print my form. However, when printed, the copy only showed a portion of my answer. Is there a way to expand Adobe Reader's highlighted text to show my full response, or should I make my responses only as long as the highlighted portion allows?

While printing any pdf file it will print the visible text only. To overcome this, the form needs to be dynamic so that it expands in layout while entering more data. Usually dynamic forms are developed by Adobe LiveCycle Designer.
~Deepak

Is there a way to add Adobe Reader directly to my website for legal documents?

Is there a way to add Adobe Reader directly to my website for legal documents? It is on Wordpress. [link removed by moderator]

Technically, you CAN embed a pdf so that it opens within the page. Use <embed src="http://yoursite.com/the.pdf" width="500" height="375">
But you'll want to test it with all browsers (assuming this is something you are trying to accomplish).

I have 5 devices all on one itune account.i have not activated icloud because i dont want it to sync all our information together. is there a way to set it up to only sync the music together and not the contacts photos messages etc

i have 5 devices all on one itune account.i have not activated icloud because i dont want it to sync all our information together. is there a way to set it up to only sync the music together and not the contacts photos messages etc

Unless you subscribe to iTunes Match, iCloud doesn't sync music. Just set up every person's devices on a separate iCloud account and your iCloud data and photo stream will remain separated. Each iCloud account will need a separate ID, but it does not need to be the same as your iTunes ID. You can continue to share the same iTunes ID and maintain separate iCloud accounts with separate IDs for iCloud.
You'll also want to use separate IDs for each person for iMessage and FaceTime. This will keep your text messages and FaceTime called separated as well. The easiest way to do this is to have everyone use their iCloud ID for these two services as well.

Is there a way to force Adobe Reader to grab the sign on ID for a digital stamp?

I work for a state Agency and we want to use digital stamps as our signatures on our internal documents. I have created the form in LiveCycle and I know that in Adobe Reader by default the stamp will use the person's sign on ID for the stamp and then the person adds their name and other information.
However, if the person right clicks the stamp, and edits the Identity and puts in another sign on ID number, such as their supervisor's and stamps the document, there is no way to tell that both of those stamps, with different sign on IDs and names, were created by the same person.
If there is a script I can enter in LiveCycle, that when the form is opened in Adobe Reader, that would lock the Identity field of a stamp created in Adobe Reader from allowing a change to the sign on ID, then that would solve our problem and maybe the problem for other state agencies wanting to follow suit.
The digital signatures are even worse. I made one in my name, my supervisor's name and my dog's name, attached them all to a document, validated all the signatures and they look absolutely authentic. Why would Adobe make digital signatures like that? If we could just find some evidence within the data showing that all the signatures were applied by the same person or on the same computer, then we could use them. But the stamps at least grab that unique sign on number that we use and applies it to the stamp if the user doesn't alter it.
I'm on a time crunch as we hoped to launch this after the first of the year but our attorneys are saying, "uh, uh" until something can be done to prevent fraud. We have over 3,000 people in our agency so EchoSign would be out of the question.
I'd appreciate any suggestions.

You will not get what you need using stamps, especially if you ever want to use dynamic XFA forms.
The digital signatures that were signed with a self-signed digital ID won't fully validate unless the user chooses to trust the corresponding digital certificate first. You should only trust a digital certificate if you trust its source. The problem is using self-signed IDs will be difficult to use on the scale you're talking about.
Digital signatures are the best approach for your needs. They can provide both nonrepudiation of document origin as well as document integrity. You just have to figure out how to implement a solution you can afford.
You agency can become its own certificate authority and issue certificates to its employees. You'd just have to find a way to implement and manage such a system.

Adobe Reader view in Internet Explorer is very narrow

I am able to open PDF files inside Internet Explorer but they show up in a 2 inch wide (or so) column on the left side of the screen and I am unable to get this very narrow view to widen. The PDF is there but very very small. Zooming in works but again all I can see is 2 inches or so of the left hand side. The right hand side is solid black as if the plugin is just sized down to be very narrow. I've reinstalled Acrobat Reader but still have the issue. Has anyone ever seen this?

Does this happen on every site? Try opening the PDF on this site
http://www.adobe.com/devnet/flashplayer/articles/flash_player_admin_guide.html
Does it happen here as well?
Can you provide a screenshot on how that looks?

Adobe Reader XI hangs Internet Explorer!

We support several clients and as each PC upgrades to Adobe Reader XI it breaks the IE Add-On (view in browser) capability.
The pdf starts to download, pops up in the browser, and then in about 5-10 seconds hangs until it times out (45 minutes later).
IE then throws up the error "A network error occurred while accessing this document on the Internet. Would you like to close the document or reload it?"
If the user downloads the pdf it works; if the user uses Chrome or FF it works! Have tried disabling the "Fast View". It just then allows me to see when it stops downloading.
I have tried Windows XP, Win7 & Win8 and different versions of IE and they all fail!
I am seeing this across all my clients!
Sometimes, if I disable the Add-on it will then download and open it in Adobe Reader but sometimes (haven't figured out the exact combination but IE9 & Win 7 fails) even though it's disabled, it still opens it in the browser and hangs.
I created a GPO that disables the Add-n but it continues to try to open it in the IE browser.
Help!

We've been testing this some more, and we've discovered our problem. We have a Xerox global print driver installed on our computers that runs our printer.
If we take a file created in the Microsoft Suite, whether Word or Excel, and print to PDF through the print driver, and then upload that file to a website and provide a link in a page for people to click, the PDF throws an error in Internet Explorer, giving the error listed above, and fails to open. The PDF opens fine locally through Internet Explorer, and you can view the file through the "View" option in Gmail. You can also view that file in Firefox and Chrome with no problem. And the file downloads just fine.
If we take the same file and use the "Save As" option in the Microsoft program to save the file as a PDF and upload that to a website, the file opens just fine in Internet Explorer, as well we everywhere else.
The print driver is doing something in the PDF-making process that bothers Internet Explorer.

ADOBE READER NOT WORKING INTERNET EXPLORER 11

Help!!
I have called my Bank and have gone through all the settings and everything is correct.
I have the recent upgrade Adobe Reader 11.0.5 and it is not working with my Internet Explorer 11, it works fine in Google Chrome so how do I get it to work in Internet Explorer 11.
Thanks!

See if this helps: http://support.microsoft.com/kb/2716529
The article mentions IE10, but the issue is the same with IE11.

Is there a way to set up browse sequences for project with multiple TOCs and conditionalized modules

I'm using RoboHelp 9 with WebHelp output.
I've got five outputs, one of which contains Help for common functions, while the other four contain Help for licensed modules. When a user opens the Help for a licensed module, the user sees the core Help and the licensed Help. In addition, files are conditionalized so that searching for unlicensed content from a licensed Help module brings up nothing.
I've been troubleshooting problems with the Previous Topic and Next Topic which, thanks to William, I learned are related to browse sequences. After trying assorted configurations, I've got a couple of questions:
Does RH support only a single browse sequence in a project, even when the project has multiple outputs & TOCs?
If RH supports only a single browse sequence, does that mean there is no way to create a unique browse sequence for each separate output?
If RH supports multiple browse sequences, what is the workflow?
I also maintain a 'master' TOC that contains all the modules, both common and unlicensed. What I've done for now is to autocreate a browse sequence based on the 'master TOC'. When I generate output for a licensed module, which is conditionalized, I only see the TOC for that module and, therefore, can only browse between books and subbooks in that module. I've also verified that topics that do not appear in the conditionalized module, such as for another licensed module, do not appear in the Search results list either.
Carol

Me again, Carol
You also asked about the functional differences between WebHelp and WebHelp Pro, so let me elaborate.
I'm aware of only two major differences (other than the extra benefits of feedback analytics reports and management of "Areas" with authentication in RoboHelp Server).
The behavior of Browse Sequences as explained above
The fact that Content Categories are not supported in WebHelp Pro for this latest version 9.
As for the Browse Sequences you are trying to provide for different modules (licensed, etc.): Multiple Browse Sequences are included in a single .BRS file. The sequences are defined in the XML within the single file.
As a workaround (for either WebHelp or WebHelp Pro) you could create a NGP Help.brs. which you have already created for one module; then backup and archive it. Then, create a modification for the different module before you generate again. The NGP Help.brs. will need to have the same name as your project so you will have to manage the desired .brs file into the project folder when you generate that version. All of your other choices (TOC, Index, Conditional Tags, etc.) would remain the same for the respective modules.
Finally, I note that you are apparently generating WebHelp Pro right now even though you are not publishing it to the RH Server? This is really not the best practice. You should generate plain WebHelp for a web server that does not have RH Server on it (even though you may be getting away with it). As for your concern about "breaking" something; each output is placed in a different !SSL! folder automatically when you generate, so you should be able to generate WebHelp without interferring with the WebHelp Pro output. Then, you can re-publish to the RH Server using WebHelp Pro whenever the server is ready.
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
Evergreen, Colorado
www.showmethedemo.com

Is there a way to set up email sinc of folders using Windows 7 and Live Mail?

When I got my new computer with Windows 7, I got email on Live Mail. I have not been able to set up sinc with email folders. Is it possible to sinc with these or must I have Outlook? Is this Outlook or Outlook Express? Can I purchase Outlook separately?

Me again, Carol
You also asked about the functional differences between WebHelp and WebHelp Pro, so let me elaborate.
I'm aware of only two major differences (other than the extra benefits of feedback analytics reports and management of "Areas" with authentication in RoboHelp Server).
The behavior of Browse Sequences as explained above
The fact that Content Categories are not supported in WebHelp Pro for this latest version 9.
As for the Browse Sequences you are trying to provide for different modules (licensed, etc.): Multiple Browse Sequences are included in a single .BRS file. The sequences are defined in the XML within the single file.
As a workaround (for either WebHelp or WebHelp Pro) you could create a NGP Help.brs. which you have already created for one module; then backup and archive it. Then, create a modification for the different module before you generate again. The NGP Help.brs. will need to have the same name as your project so you will have to manage the desired .brs file into the project folder when you generate that version. All of your other choices (TOC, Index, Conditional Tags, etc.) would remain the same for the respective modules.
Finally, I note that you are apparently generating WebHelp Pro right now even though you are not publishing it to the RH Server? This is really not the best practice. You should generate plain WebHelp for a web server that does not have RH Server on it (even though you may be getting away with it). As for your concern about "breaking" something; each output is placed in a different !SSL! folder automatically when you generate, so you should be able to generate WebHelp without interferring with the WebHelp Pro output. Then, you can re-publish to the RH Server using WebHelp Pro whenever the server is ready.
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
Evergreen, Colorado
www.showmethedemo.com

Adobe Reader 11.0.07 defaults to duplex printing. Is there a way to set the default to leave that "print to both sides of the page" box unchecked?

Adobe Reader 11.0.07 defaults to duplex printing. Is there a way to set the default to leave that "print to both sides of the page" box unchecked?
I am working on an end-user's computer, I just updated to the newest Adobe Reader and they don't ever print duplex. I want to be able to have the "print to both sides" box unchecked on the print dialog by default. Is there a way to do this? I have the printer settings all set to 1-sided but it is adobe print dialog settings that keep messing it up.
Thanks!

Hi John,
Have you tried repairing Reader and checked?
Does this issue occur only on this machine or are you facing the issue with other computers as well which have updated to Reader 11.0.10?
Regards,
Anoop

I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password pro

I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password protecting the document?

Is there a setting that needs to be set to allow the annotation features? I set password protection to open and then password for editing and set it to Any except page extraction, but it still did not give the annotation option

Is there a way to set the FOLDERS window in Adobe Bridge as a Column view?

I'm used to the way Finder display the folders on Mac(Column view). I would love, if its possible, to have the option to set the Folders window in Bridge to Column view:
Finder Column View:
Instead of Bridge List view:
Is there a way to set the FOLDERS window in Adobe Bridge as a Column view like in Mac OSX Finder?

Is there a way to set the FOLDERS window in Adobe Bridge as a Column view like in Mac OSX Finder?
No, but it is very nice idea, add it to the feature request page:
http://feedback.photoshop.com/photoshop_family/

Acrobat or Reader: Is there a way to set the print scaling default at the application level?

Is there a way to set the Page/Print Scaling to a default at the application level? For Acrobat and Reader?
Thanks,

Often asked, but that feature retains the last used local setting.
You can however, change the default for Documents, individually, in their Properties > Advanced tab

Is there any way to set read timeout on JDBC connection?

When the network connectivity between the machine
where Database is running and where the application is running breaks,
the query executed using the old connection handle is not timing out.
Is there any way to set read timeout on JDBC connection. ?
FYI, Oracle JDBC thin Driver is used in our application.

Set the tuning parameters with Embedded OC4J Server Preferences>Current Workspace>Data Sources>jdev-connection-DBConnection1 node.
Select the Tuning tab.
The Inactivity Timeout parameter specifies the number of secs of inactivity after which a connection gets disconnected.

Is there a way to set Adobe Reader X and Internet Explorer 10 integration on and off per website URL?

Similar Messages

Maybe you are looking for