Is there an iPod Shuffle battery pack for the 512MB

M9759G/A says it's only compatible with the 1GB and NOT the 512mb... is this true, or is there another solution.

says it's only compatible with the 1GB and NOT the 512mb
That's not what it says.
It states it's compatible with the 1st Generation iPod.
The 1st Generation iPod Shuffle came in 512MB or 1GB versions.
This is compatible with both.

Similar Messages

  • Using or building extenal battery pack for the Mu

    I would like to build or buy an external battery pack for my Mu-Vo. I go on long trips and don't always have access to power. I'm thinking of building a pack that runs off of AA's (rechargeable). The documentation that I've been able to find says the units uses 5V. The battery pack would generate 4.8V. Would this work? Has anyone built such a device? Is there one commercially available?
    Thanks
    Dennis

    http://www.bixnet.com/usbbatterybox.html
    If you use 4x2300 or higher NiMH batteries you can get a number of recharges/extended battery life from one charge.
    I have a couple of these very handy gizmos, and with the right adapter cord can run a JB3 down to a MuVo?4 / Micro or TravelSounds.
    jake

  • Is there a version of Battery Maximizer for the R40 running Vista 32-bit?

    I have an old R40 / 2896-GZU
    I recently upgraded to Vista and found the power management driver V1.67.xx.xx which I installed,
    but it seems to just be a low-level driver.
    I'd like to attempt to condition the battery as was possible with the "Battery Maximizer" software under XP,
    but can not find a version of BM that works on the R40 for the Vista OS. Will the XP version run or is there another option?
    ThinkVantage System update V3.16 does not appear to function with the combination of the R40 + Vista as it comes back with no updates at all  
    Thanks,
    Jim
    Solved!
    Go to Solution.

    You're looking at two somewhat different sets of problems here:
    a) R40 was never shipped with Vista so any drivers that might come up on the web are likely hacked ones, with no guarantee on how well they'll work.
    b) The GPU is not supported by Vista or any of the newer MS operating systems, which adversely affects the entire power setting and is guaranteed to be at least a part of your problem.
    Personally, I'd throw Linux on it and call it a day but that's me.
    Good luck.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • How heavy is the battery pack for the CVS?

    The physical dimensions would be helpful too!

    Barney,
    What is the part number that you were you asking about?
    A Talley
    Applications Engineering
    National Instruments

  • Battery Pack for iPod Nano

    Can anyone recommend a good battery pack for the Nano? I'm having a heck of a time finding one.

    See also:
    Tekkeon myPower for iPod MP1100.
    NYKO iBoost for iPod
    NYKO iBoost Mini for iPod
    This one is amazing if it lives up to the company's promises:
    iCel for iPod

  • Battery Packs for MuVO V

    Is there going to be exchangable battery packs for the MuVo V200?
    I'm thinking about buying one and I like to have at least a bit of color. Most of the MuVos sold in Europe are either black, white, or grey.

    You can buy one directly from Creative -- this website also has a shopping area!
    Message Edited by BMAG on 03-4-20060:56 AM

  • I need to get an ipod shuffle 4th generation for work using ear phones but at home are there adapters to hook it up to my home stereo that had dock for ipods but shuffle is not compatible w/o some kind of adapters. plz advise

    i need to buy an ipod shuffle 4th generation for work using earphones but at home are there adapters to hook it up to my sony home stereo dock? the dock isnt compatible w/the shuffle but is w/the other ipods.  Plz advise  thank you

    Oh no... NOT THE 99-PAGER!!! Anything but THAT!!!

  • I've had my ipod shuffle (2nd generation) for a long time now and after a year and a bit of not being in use it doesn't work. When I connect it to the computer it doesn't come up. Can my ipod be charged or fixed?

    I've had my ipod shuffle (2nd generation) for a long time now and after a year and a bit of not being in use it doesn't work. When I connect it to the computer it doesn't come up. Can my ipod be charged or fixed? Please help!

    That is about normal. You can maximize battery life by changing some settings. See:
    Apple - Batteries - iPod
    Apple will exchange your iPod for a refurbished one for with a new battery for $79. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following will replace your battery for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the battery yourself if you are up to it. You can purchase a replacment for about $10
    iPod Touch Repair – iFixit                  

  • Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message

    Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
    Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
    http://support.apple.com/kb/HT2292
    http://support.apple.com/kb/TS1369
    http://support.apple.com/kb/HT1923
    http://en.kioskea.net/forum/affich-17997-ipod-not-detected

    I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
    This article was one of the ones you linked to above in your initial post
    http://support.apple.com/kb/TS1369
    Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears?  That appears to be your situation.
    Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again.  If you can get it to work again initially, before doing anything else, try the following.  Select the shuffle in the iTunes sidebar, under DEVICES.  Over to the right, go to the Summary tab.  By default, the checkbox for Enable disk use should be unchecked.  If so, check it and Apply the change.  See if that makes any difference. 
    (If Enable disk use was already checked, try unchecking it and Apply the change.  Basically, set it the "other way" and see if there is any improvement.)
    NOTE:  When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
    If the disk use change makes a difference, that may provide a clue about the actual cause.

  • My ipod shuffle battery dies quickly.  Any suggestions?

    My ipod shuffle battery dies quickly and when I plug it in to charge it just blinks orange. . .

    Hello jharris1222,
    Thanks for using Apple Support Communities.
    The blinking orange status light indicates that the device is syncing with iTunes.  Please see the following for more information:
    Blinking orange indicates that the unit is syncing with iTunes or that disk use was enabled in iTunes. In this state, iPod shuffle may be charging or fully charged. Check the charge status icon next to the iPod shuffle in iTunes or eject iPod shuffle from iTunes but leave it connected to USB and determine if the status light changes to solid green or solid orange.
    iPod shuffle: Checking the battery charge
    http://support.apple.com/kb/HT1510
    iPod shuffle: How to charge the battery
    http://support.apple.com/kb/HT1477
    Take care,
    Alex H.

  • My gen 4 ipod shuffle is not showing the green light when I switch it on (Green area shown). But when I plug it into the computer there initial orange blink and then solid orange. What wrong with it and how can I fix it.

    My gen 4 ipod shuffle is not showing the green light when I switch it on (Green area shown). But when I plug it into the computer there initial orange blink and then solid orange. What wrong with it and how can I fix it. 

    Hello Korawees,
    I was researching the issue you are describing and had a recommendation. The device is very simple, so the software troubleshooting for it is pretty limitted so I think you shoud restore the iPod shuffle and re sync the content. That way, if it is a software issue, this will fix it. Here is the article named Restoring iPod shuffle to factory settings found here: http://support.apple.com/kb/HT1481.
    Before Starting
    It is important to understand the difference between "update" and "restore." Update does not affect your settings or songs, it simply installs updated software that controls iPod shuffle. Restore erases the disk and restores iPod shuffle to its original factory condition with updated software. If you only need to update iPod shuffle, this should be done on the computer where music is normally synced. Updating on another computer will result in all songs being removed from iPod shuffle.
    Warning: Because Restore erases all songs and files on iPod shuffle, make sure to back up any files you've saved on iPod shuffle. Your songs, podcasts, and audiobooks can be synced back to your iPod shuffle if the items are part of your iTunes library.
    How to restore iPod shuffle
    Ensure that you have an active Internet connection as new versions of iTunes and iPod Software may need to be downloaded to your computer.
    Download and install the latest version of iTunes if you do not already have it installed.
    Open iTunes, and then connect iPod shuffle to your computer.
    After a few moments, iPod shuffle will appear in the Devices section on the left side of the Tunes window.
    Select iPod shuffle under Devices and you will see information about it appear in the main iTunes window under the Summary tab/button for iPod shuffle (3rd and 4th generation) or the Settings tab/button for iPod shuffle (1st or 2nd generation).
    The Version section tells you whether iPod shuffle is up to date or needs a newer version of the software.
    Click the Restore button. You will be presented with one or more restore options that may prompt iTunes to automatically download the latest iPod Software. The 4-possible restore options are:
    Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
    Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.
    Restore Option 3: Use Newest Version - Restores with the latest iPod Software currently on your computer.
    Restore Option 4: Restore and Update - Restores after downloading the latest iPod Software on your computer.
    If you are using a Mac, a message will appear prompting you to enter an administrator’s name and password.
    A progress indicator will appear on the computer screen indicating that the restore process has started. Do not disconnect iPod shuffle during the restore process.
    After the restore process is complete, the iPod shuffle's status light will flash orange continuously. The iPod Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences as you did when you connected your iPod shuffle for the first time.
    When you come to step 7, I recommend Restore Option 4.
    Take care,
    Sterling

  • Reliable battery pack for backup power?

    I was looking at the Energizer brand battery pack for iPods, but I don't know if its "Touch" compatible since its not listed. Anyone have hands on experience with a good (safe) backup power device for the Touch? I have the 3g 64gb model.

    Here is a link to one of these products on Amazon:
    Notebook Battery Pack

  • Is there a cord to hook up my ipod shuffle generation 2 to the iHome

    Is there a cord to hook up my ipod shuffle generation 2 to the iHome iH6 Dual-Alarm Clock Radio?
      Windows XP  

    how come when u clik on the ihome at the store on
    apple.com it says what modles it uses and it dose not
    say the ipod suffle seconed generation
    That's what I've been telling you, possibly too subtly, I thought you already HAVE an iH6, thus was trying to show you that you could use the 2nd Gen Shuffle with it... The iH6 isn't exactly the PERFECT solution as far as the 2nd Gen Shyffole is concerned and vice versa.

  • What is a good external battery pack for a 13" retina display?

    what is a good external battery pack  for my 13" retina display(macbook)

    Have a look here for the sizes and prices.
    It is however, much better to get a USB external drive that comes with it's own power adapter to avoid issues when or if your USB port can't supply enough power to your external drive.
    That issue however does happen rarely but it does happen.  Especially when connecting other devices to your other USB port while your external hard drive is connected to your other usb port.

  • Battery pack for MuVo TX

    Hi!?Do you know where I can buy a battery pack for my MuVo TX?because i broke my own one. PS:?Sorry for mine bad English!

    You can buy one directly from Creative -- this website also has a shopping area!
    Message Edited by BMAG on 03-4-20060:56 AM

Maybe you are looking for

  • Closing the report's confirmation window

    Hi All, I am using developer 10g and I am calling a report from the form. this report its DISTYPE is FILE after the report is generated and created the file a window apear that the report generated successfully. I need to hide this confirmation becau

  • Urgent: regarding sub total button in alv report

    hi, i had made dis report and it is is fine till now,but now i want add the sub total field in it ,by making double click on the field sub-total should be displayed in it. here is d code as i had tried the sub - total but when i execute it is giving

  • Receiver Determination Step For Synchrnous Send  in BPM

    Hi, How to use BPM Receiver Determination step for a synchronous send step? My scenario is to send a request to multiple receivers synchronously and get the response.How can i achieve this using Receiver Determination step in BPM. Regards Divia

  • HP Officejet 6500 won't print black after power outages

    We experienced a series of power outages last night. Now the black won't print at all. The print cartridge is fairly new, about a month old, scarcely used. All the color cartridges will print. I've tried cleaning the print heads and running the align

  • Eevent ID 1114

    Good Day , I did a migration from Exchange2003 to Exchange2010 SP3 evrything work fine except i saw in event viewer this warning Description: Table was marked as in use while releasing a database session on database "Mailbox Database ".  Problem will