Is there any batch function module for '/SAPAPO/MSNP_GET_DRPIO_READ' in APO
Hi,
Iam developing a report for APO, wherein I pass matid & locid to the function module '/SAPAPO/MSNP_GET_DRPIO_READ' and get the order details as the o/p from the function module, now these takes place in a loop..endloop for more than 60,000 records which takes much of the processing time, can this be avoided by passing full table of matid,locid to the function module or rather a batch FM for the above mentioned function module.
Thanks & Regards,
Sanjay
HI,
Try using Function Module:
DD_DOMA_GET , If it is RFC enabled it can be used for reading the domain,
Kindlly go through this link below:
How to get "Fixed Domain Values" from other system by RFC-Call?
Hope it helps,
Regards
Mansi
Similar Messages
-
Any BAPI/Function Module for adding new record with dates in PA0027
Hi all,
I am tryig to find is there any BAPI/Function module for updating new record with Start Date and End date for specified Personal Number in PA0027 Table.
In PA0027 table i will be passing start date and end date for selected personal number, it needs to add new record with this details in the table checking the condition that this start date and end dates should not be between any of of start date and end dates for the specified personal number.
thanks for ur time.
MuraliHi Raj/Suresh thanks for ur answers.
but i am having a problem,i gave this values.
INFTY -
0027
NUMBER -
00000010
SUBTYPE -
010
OBJECTID
LOCKINDICATOR
VALIDITYEND -
03/12/2006
VALIDITYBEGIN -
03/01/2006
RECORDNUMBER -
000
RECORD -
P0027
OPERATION -
CHK
TCLAS -
A
DIALOG_MODE -
0
NOCOMMIT -
Y
VIEW_IDENTIFIER
SECONDARY_RECORD
i am getting short dump saying that
The source field is too short.
The current program, "SAPLHRMM", tried to assign a field to a field symbo
However, the field is shorter than the type of the field symbol, which
is not allowed.
The statement in question is in the form ASSIGN f TO <fs> CASTING or
ASSIGN f TO <fs> with a field symbol that was created using the
STRUCTURE addition.
I tried operation - Chage,Create (same thing for all inputs)
is this correct funtion moduel for my requirment?
what ever i am passing the start and end dates this should check in the table records with this personal number and if this start date and end dates are not between of any start and end dates then it should add new record with this dates.
Thanks for ur time.
Murali. -
Is there any RFC function module to read domain fixed value
Hi,
Is there any RFC function module to read domain fixed value from remote system in basis layer?
As we cannot simply wrap DD_DOMVALUES_GET with a new RFC module,because remote system will not install our component, our wrap function module is not there.
We may need a RFC fm from basis layer.HI,
Try using Function Module:
DD_DOMA_GET , If it is RFC enabled it can be used for reading the domain,
Kindlly go through this link below:
How to get "Fixed Domain Values" from other system by RFC-Call?
Hope it helps,
Regards
Mansi -
Are there BAPI or function modules for creating posting address ?
Are there BAPI or function modules for creating posting address and budget address? We are currently use BDC program and T code FMBSPO_MULT (Posting address) and T code FMBSBO_MULT(budget address), but it is a very slow processing because we have thousands of funds centers.
Your input will be appreciated!
Regards,
Fisher LiLi,
You will have, may be more answers in the technical forum :
https://www.sdn.sap.com/irj/sdn/collaboration
Regards
Valérie -
Is there any standard function available for generation of RIN number.
Hi experts,
RIN is Renewable Identifiaction Number.
Structure for a RIN is a 34-character numeric code in the format:
YYYYCCCCFFFFFBBBBBRRDKSSSSSSEEEEEE
YYYY = Year of Batch Production (when it leaves the facility)
CCCC = Company registration ID
FFFFF = Facility registration ID
BBBBB = Producer assigned Batch Number
RR = Equivalence Value for the renewable fuel
D = Renewable Type Flag (1 - cellulosic; 2 - non-cellulosic)
K = RIN Type Flag (1 - standard, 2 - extra-value)
SSSSSS = RIN Block Starting Gallon Number
EEEEEE = RIN Block Ending Gallon Number
Is there any standard function avaiable in R3 to generate such number?
Please reply asap.
Thank you in advance.Hi deepak,
1. we can use the FM
DATE_CHECK_PLAUSIBILITY
regards,
amit m. -
Is there any bapi/Function module to change only header text in fb02
Hi ,
I want to change only header text in FB02 .the header text will come from a internal table.My Requirement is
1. open a document in FB02
2.change the header text of the document.
Right now i'm doing this through an BDC.but i'm looking for a BAPI /FM.
I Tried bapi_acc_gl_posting_post, fI_document_change..
is there any BAPI/FM for this???
Thanks,
ChallaYou can use SAVE_TEXT FM
Thanks
Seshu -
Is there Any Standard Function Module that populates mail in SAP inbox
Hello Experts,
The scenario that we are working is , Email Integration in SOLMAN.That is the done using XI , first the mails raised for Support Desk issues from Outlook are read and collected in XI ,now the requirement is from XI we have to populate the mails into SOLMAN's Inbox. So is there any standard FM that can be used in XI for this purpose.
Or is there any other way in which the mails can come into Solman's Inbox,If someone has worked on this , please give me your valuable suggestions ASAP.
Thanks & Regards,
MohanaHi deepak,
1. we can use the FM
DATE_CHECK_PLAUSIBILITY
regards,
amit m. -
BAPI Function Module for SCM APO Trans code /SAPAPO/AC42
Hi,
Is there any BAPI Function Modules for SCM APO Tcode /SAPAPO/AC42.
This BAPI FM should return the column values "Remaining Prod Alloc" and "Incoming Order Quantity" when we give
below details as inputs for the Tcode /SAPAPO/AC42
Product Allocation Group
Product
Allocation Procedure
prod Alloc step
Product Alloc Object (Characteristics of Product Alloc Group)
Plant (Characteristics of Product Alloc Group)
Customer Group 5 (Characteristics of Product Alloc Group)
Reward points if helpful.
Thanks,
MichHi,
You should be able to get the information using the standard BAPI (Assuming you are using SCM5.0) BAPI_APOPAL_INSERT in the transaction BAPI.
ProductAllocationAPO.DataInsert
Interface to Import Product Allocation Data Functionality
This method is used to adopt data from OLTP systems for product allocation in the global availability check.
You can do the following using the method:
Adopt new data
You can adopt new characteristics combinations or new time series. Newly created characteristics combinations have the status Active and are therefore included in the product allocation check.
Change existing data
You can overwrite existing data if you have set the interface parameter ALLOW_UPDATE. You can set the status of existing characteristics combinations to Active if you set the interface parameter UPDATE_STATUS. If the characteristics combination does not exist, the system creates it.
The product allocation quantity is overwritten for existing time series. If you also want to change the incoming orders quantity, you must set the interface parameter UPDATE_INCOMING_ORDER_QTY. If the time series does not exist, the system creates it.
Prerequisite
To be able to use this method, you must have made all the Customizing settings for product allocation. For more information, see the Implementation Guide (IMG) for SAP APO under Global Available-to-Promise -> Product Allocation.
Regards
Vinod -
Function Module for open Purchase Order & Sales Order?
Hi, commonly I read the data from tables and calculate the open quantity for sales order and purchase order, but I want to know, are there any standard function modules for getting the list of open "purchase order" and "sales order" respectively?
Thanks and Regards.hi Ren,
u can check all these bapi's related to salesorder
BAPI_SALESORDER_CHANGE Sales order: Change Sales Order
BAPI_SALESORDER_CONFIRMDELVRY Sales Order: Confirmation of Delivery; Document Flow Update
BAPI_SALESORDER_CREATEFROMDAT1 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDAT2 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDATA Create Sales Order, No More Maintenance
BAPI_SALESORDER_GETLIST Sales order: List of all Orders for Customer
BAPI_SALESORDER_GETSTATUS Sales Order: Display Status
BAPI_SALESORDER_SIMULATE Sales Order: Simulate Sales Order
May be this FM can help you
MB_ADD_PURCHASE_ORDER_QUANTITY (Reading and adding open purchase order quantities)
Regards,
Naveen -
Function module for getting the all PO waiting for release
Hi,
Is there any standard Function module for gettting all the PO's which all waiting for release.
Regards
Bala.hi Bala,
ECC 6.0 Exits for VA01
go through the above link i think that will help u...
Regards,
sindhu. -
Hi all,
Is there any Z function modules for OLE, which will download the data directly to Excel with 2 sheets.
Regards,
ShaliniHi Shalini Reddy
there is no FM but code is there... u can see...
*& Report YOLE_FOR_EXCEL
REPORT yole_for_excel.
*REPORT ZTEST_BYW.
OLE specific include file
INCLUDE ole2incl.
INCLUDE excel__c.
data definitions of OLE objects with type ole2_object
PARAMETERS: p_filenm(80) LOWER CASE OBLIGATORY
DEFAULT 'd:\temp\report_tsl.xls'.
DATA: g_tmp_workbook TYPE ole2_object.
DATA: g_tmp_worksheets TYPE ole2_object.
DATA: g_tmp_worksheet1 TYPE ole2_object.
DATA: g_tmp_worksheet2 TYPE ole2_object.
DATA: g_pc_template LIKE rcgfiletr-ftappl
VALUE 'd:\temp\mmr_rpt_tsl_tmp.xls'.
DATA: g_excel TYPE ole2_object.
DATA: g_workbooks TYPE ole2_object.
DATA: g_workbook TYPE ole2_object.
DATA: g_worksheets TYPE ole2_object.
DATA: g_worksheet TYPE ole2_object.
DATA: g_cell TYPE ole2_object.
DATA: g_cell1 TYPE ole2_object.
DATA: g_cell2 TYPE ole2_object.
DATA: g_cellrange TYPE ole2_object.
DATA: g_font TYPE ole2_object.
DATA: g_interior TYPE ole2_object.
DATA: g_borders TYPE ole2_object.
DATA: g_first_ws VALUE 'Y'.
DATA: g_row TYPE i.
DATA: g_col TYPE i.
definition of loop counter
DATA: i TYPE i VALUE '5'.
DATA: BEGIN OF t_sheet1 OCCURS 1,
col1(10),
col2(20),
END OF t_sheet1.
DATA: BEGIN OF t_sheet2 OCCURS 1,
col1(10),
col2(20),
END OF t_sheet2.
START-OF-SELECTION.
PERFORM prepare_data.
PERFORM download_to_excel.
END-OF-SELECTION.
call method of excel 'QUIT'.
it is now possible to leave the EXCEL application
remark: you have to go to the EXCEL application and answer the
popup dialog screen
*& Form PREPARE_DATA
FORM prepare_data.
t_sheet1-col1 = 'A1'.
t_sheet1-col2 = 'A2'.
APPEND t_sheet1.
t_sheet1-col1 = 'B1'.
t_sheet1-col2 = 'B2'.
APPEND t_sheet1.
t_sheet2-col1 = 'Y1'.
t_sheet2-col2 = 'Y2'.
APPEND t_sheet2.
t_sheet2-col1 = 'Z1'.
t_sheet2-col2 = 'Z2'.
APPEND t_sheet2.
ENDFORM. " PREPARE_DATA
*& Form DOWNLOAD_TO_EXCEL
FORM download_to_excel.
PERFORM open_excel.
PERFORM add_worksheet1.
PERFORM add_worksheet2.
PERFORM open_template_file.
PERFORM close_excel.
WRITE: / 'End of program'.
ENDFORM. " DOWNLOAD_TO_EXCEL
*& Form FILL_CELL
*& FORM routine, which fills the specified cell in the EXCEL sheet
*& with the given value
FORM fill_cell USING i_row TYPE i
i_col TYPE i
i_value
i_fontbold
i_digit
i_wraptext
i_horizon_align
i_vertical_align.
DATA: l_str TYPE string.
CALL METHOD OF g_excel 'CELLS' = g_cell
EXPORTING #1 = i_row
#2 = i_col.
SET PROPERTY OF g_cell 'VALUE' = i_value.
IF i_fontbold = 'X'.
GET PROPERTY OF g_cell 'Font' = g_font.
SET PROPERTY OF g_font 'Bold' = 1.
ENDIF.
IF NOT i_wraptext IS INITIAL.
SET PROPERTY OF g_cell 'WrapText' = 1.
ENDIF.
IF NOT i_horizon_align IS INITIAL.
IF i_horizon_align = 'L'.
SET PROPERTY OF g_cell 'HorizontalAlignment' = xlleft.
ELSEIF i_horizon_align = 'R'.
SET PROPERTY OF g_cell 'HorizontalAlignment' = xlright.
ELSEIF i_horizon_align = 'C'.
SET PROPERTY OF g_cell 'HorizontalAlignment' = xlcenter.
ENDIF.
ENDIF.
IF NOT i_vertical_align IS INITIAL.
IF i_vertical_align = 'T'.
SET PROPERTY OF g_cell 'VerticalAlignment' = xltop.
ELSEIF i_vertical_align = 'B'.
SET PROPERTY OF g_cell 'VerticalAlignment' = xlbottom.
ELSEIF i_vertical_align = 'C'.
SET PROPERTY OF g_cell 'VerticalAlignment' = xlcenter.
ENDIF.
ENDIF.
To set number format for cell
IF i_digit <> ''.
IF i_value IS INITIAL AND i_digit <> '%'.
SET PROPERTY OF g_cell 'VALUE' = ''.
ELSE.
Set number format for cell with number
IF i_digit = '1'.
SET PROPERTY OF g_cell 'NumberFormat' = '#,###.0 '.
ELSEIF i_digit = '2'.
SET PROPERTY OF g_cell 'NumberFormat' = '#,##0.00 '.
ELSEIF i_digit = '%'.
SET PROPERTY OF g_cell 'NumberFormat' = '#,##0.00% '.
ELSE.
SET PROPERTY OF g_cell 'NumberFormat' = '#,### '.
ENDIF.
ENDIF.
ENDIF.
ADD 1 TO i_col.
ENDFORM. "FILL_CELL
*& Form OPEN_EXCEL
FORM open_excel.
DATA: l_cnt TYPE i.
create object excel of OLE class 'EXCEL.APPLICATION'
CREATE OBJECT g_excel 'EXCEL.APPLICATION'.
CALL METHOD OF g_excel 'WORKBOOKS' = g_workbooks.
CALL METHOD OF g_workbooks 'ADD' = g_workbook.
GET PROPERTY OF g_workbook 'Worksheets' = g_worksheets.
GET PROPERTY OF g_excel 'ACTIVESHEET' = g_worksheet.
SET PROPERTY OF g_excel 'DISPLAYALERTS' = 0.
GET PROPERTY OF g_worksheets 'Count' = l_cnt.
l_cnt = l_cnt - 1.
Delete unwanted worksheets
DO l_cnt TIMES.
GET PROPERTY OF g_excel 'ACTIVESHEET' = g_worksheet.
CALL METHOD OF g_worksheet 'DELETE'.
ENDDO.
ENDFORM. " OPEN_EXCEL
*& Form CLOSE_EXCEL
FORM close_excel.
SET PROPERTY OF g_excel 'VISIBLE' = 1.
CALL METHOD OF g_workbook 'SAVEAS'
EXPORTING #1 = p_filenm.
quit Excel and free all OLE objects
call method of g_excel 'QUIT'.
FREE OBJECT g_interior.
FREE OBJECT g_borders.
FREE OBJECT g_font.
FREE OBJECT g_cell.
FREE OBJECT g_cell1.
FREE OBJECT g_cell2.
FREE OBJECT g_cellrange.
FREE OBJECT g_excel.
FREE OBJECT g_workbooks.
FREE OBJECT g_workbook.
FREE OBJECT g_worksheets.
FREE OBJECT g_worksheet.
ENDFORM. " CLOSE_EXCEL
*& Form ADD_WORKSHEET
FORM add_worksheet USING i_name.
Add new worksheet
IF g_first_ws <> 'N'.
g_first_ws = 'N'.
GET PROPERTY OF g_excel 'ACTIVESHEET' = g_worksheet.
ELSE.
CALL METHOD OF g_worksheets 'Add' = g_worksheet.
ENDIF.
SET PROPERTY OF g_worksheet 'NAME' = i_name.
g_row = 1.
g_col = 1.
ENDFORM. " ADD_WORKSHEET
*& Form ADD_WORKSHEET1
FORM add_worksheet1.
PERFORM add_worksheet USING 'Test 1'.
fill line in EXCEL sheet with headerlines of table columns
g_col = 1.
PERFORM fill_cell USING g_row g_col 'My First Worksheet' 'X' ''
PERFORM merge_cell USING g_row 1 g_row 4.
PERFORM set_border USING g_row 1 g_row 4 4 ''.
ADD 1 TO g_row.
g_col = 1.
PERFORM fill_cell USING g_row g_col 'ID'(001) 'X' '' '' '' ''.
PERFORM fill_cell USING g_row g_col 'Name'(002) 'X' '' '' '' ''.
PERFORM fill_cell USING g_row g_col 'Telephon'(003) 'X' '' '' '' ''.
PERFORM fill_cell USING g_row g_col 'Rabatt'(004) 'X' '' '' '' ''.
loop at customr table and print values into EXCEL sheet
ADD 1 TO g_row.
LOOP AT t_sheet1.
g_col = 1.
PERFORM fill_cell USING g_row g_col t_sheet1-col1 '' '' '' '' ''.
PERFORM fill_cell USING g_row g_col t_sheet1-col2 '' '' '' '' ''.
ADD 1 TO g_row.
ENDLOOP.
g_col = 4.
PERFORM set_border USING 1 1 g_row g_col '' 4.
ENDFORM. " ADD_WORKSHEET1
*& Form ADD_WORKSHEET2
FORM add_worksheet2.
PERFORM add_worksheet USING 'Test 2'.
fill line in EXCEL sheet with headerlines of table columns
g_col = 1.
PERFORM fill_cell USING g_row g_col 'My Second Worksheet' 'X' ''
PERFORM merge_cell USING g_row 1 g_row 4.
PERFORM set_border USING g_row 1 g_row 4 1 'X'.
PERFORM set_color USING g_row 1 g_row 4 'LT'.
ADD 1 TO g_row.
g_col = 1.
PERFORM fill_cell USING g_row g_col 'ID'(001) 'X' '' '' '' ''.
PERFORM fill_cell USING g_row g_col 'Name'(002) 'X' '' '' '' ''.
PERFORM fill_cell USING g_row g_col 'Telephon'(003) 'X' '' '' '' ''.
PERFORM fill_cell USING g_row g_col 'Rabatt'(004) 'X' '' '' '' ''.
loop at customr table and print values into EXCEL sheet
ADD 1 TO g_row.
LOOP AT t_sheet2.
g_col = 1.
PERFORM fill_cell USING g_row g_col t_sheet2-col1 '' '' '' '' ''.
PERFORM fill_cell USING g_row g_col t_sheet2-col2 '' '' '' '' ''.
ADD 1 TO g_row.
ENDLOOP.
g_col = 4.
PERFORM set_border USING 1 1 g_row g_col 2 'X'.
ADD 4 TO g_row.
g_col = 1.
PERFORM fill_cell USING g_row g_col 'This is a wrap text' 'X' ''
'X' 'C' 'T'.
PERFORM fill_cell USING g_row g_col 'Vertical - Bottom' 'X' ''
'' 'L' 'T'.
ADD 4 TO g_row.
g_col = 1.
PERFORM fill_cell USING g_row g_col 'Amount 1' 'X' '' '' '' ''.
PERFORM fill_cell USING g_row g_col '100.04' '' 'X' '' '' ''.
ADD 1 TO g_row.
g_col = 1.
PERFORM fill_cell USING g_row g_col 'Amount 2' 'X' '' '' '' ''.
PERFORM fill_cell USING g_row g_col '200.01' '' 'X' '' '' ''.
ADD 1 TO g_row.
g_col = 1.
PERFORM fill_cell USING g_row g_col 'Total' 'X' '' '' '' ''.
PERFORM fill_cell USING g_row g_col '=SUM(B13:B14)' 'X' 'X' '' '' ''.
PERFORM fill_cell USING g_row g_col '0.00' 'X' 'X' '' '' ''.
PERFORM copy_cell USING g_row 2 17 5 25 8.
ENDFORm. " ADD_WORKSHEET2
*& Form MERGE_CELL
FORM merge_cell USING i_row1 i_col1
i_row2 i_col2.
CALL METHOD OF g_excel 'Cells' = g_cell1
EXPORTING #1 = i_row1
#2 = i_col1.
CALL METHOD OF g_excel 'Cells' = g_cell2
EXPORTING #1 = i_row2
#2 = i_col2.
CALL METHOD OF g_excel 'Range' = g_cellrange
EXPORTING #1 = g_cell1
#2 = g_cell2.
CALL METHOD OF g_cellrange 'Merge'.
ENDFORM. " MERGE_CELL
*& Form SET_BORDER
FORM set_border USING i_row1 i_col1
i_row2 i_col2
i_thickness
i_allborders.
CALL METHOD OF g_excel 'Cells' = g_cell1
EXPORTING #1 = i_row1
#2 = i_col1.
CALL METHOD OF g_excel 'Cells' = g_cell2
EXPORTING #1 = i_row2
#2 = i_col2.
CALL METHOD OF g_excel 'Range' = g_cellrange
EXPORTING #1 = g_cell1
#2 = g_cell2.
IF i_allborders IS INITIAL.
CALL METHOD OF g_cellrange 'BorderAround'
EXPORTING #1 = 1 "Continuous line
#2 = i_thickness. "Thickness: 1 - Normal, 4 - Thick
ELSE.
GET PROPERTY OF g_cellrange 'Borders' = g_borders.
SET PROPERTY OF g_borders 'LineStyle' = '1'.
SET PROPERTY OF g_borders 'Weight' = i_thickness.
ENDIF.
ENDFORM. " SET_BORDER
*& Form SET_COLOR
FORM set_color USING i_row1 i_col1
i_row2 i_col2
i_color.
DATA: l_colorindex TYPE i.
CASE i_color.
WHEN 'BK'.
l_colorindex = 1. "Black
WHEN 'BR'.
l_colorindex = 53. "Brown
WHEN 'OG'.
l_colorindex = 52. "Olive Green
WHEN 'DG'.
l_colorindex = 51. "Dark Green
WHEN 'DT'.
l_colorindex = 49. "Dark Teal
WHEN 'DB'.
l_colorindex = 11. "Dark Blue
WHEN 'ID'.
l_colorindex = 55. "Indigo
WHEN 'G4'.
l_colorindex = 56. "Gray 80%
WHEN 'DR'.
l_colorindex = 9. "Dark Red
WHEN 'OR'.
l_colorindex = 46. "Orange
WHEN 'DY'.
l_colorindex = 12. "Dark Yellow
WHEN 'GR'.
l_colorindex = 10. "Green
WHEN 'TL'.
l_colorindex = 14. "Teal
WHEN 'BL'.
l_colorindex = 5. "Blue
WHEN 'BY'.
l_colorindex = 47. "Blue Gray
WHEN 'G3'.
l_colorindex = 16. "Gray 50%
WHEN 'RD'.
l_colorindex = 3. "Red
WHEN 'LO'.
l_colorindex = 45. "Light Orange
WHEN 'LI'.
l_colorindex = 43. "Lime
WHEN 'SG'.
l_colorindex = 50. "Sea Green
WHEN 'AQ'.
l_colorindex = 42. "Aqua
WHEN 'LB'.
l_colorindex = 41. "Light Blue
WHEN 'VL'.
l_colorindex = 13. "Violet
WHEN 'G2'.
l_colorindex = 48. "Gray 40%
WHEN 'PK'.
l_colorindex = 7. "Pink
WHEN 'GD'.
l_colorindex = 44. "Gold
WHEN 'YL'.
l_colorindex = 6. "Yellow
WHEN 'BG'.
l_colorindex = 4. "Bright Green
WHEN 'TQ'.
l_colorindex = 8. "Turquoise
WHEN 'SB'.
l_colorindex = 33. "Sky Blue
WHEN 'PL'.
l_colorindex = 54. "Plum
WHEN 'G1'.
l_colorindex = 15. "Gray 25%
WHEN 'RS'.
l_colorindex = 38. "Rose
WHEN 'TN'.
l_colorindex = 40. "Tan
WHEN 'LY'.
l_colorindex = 36. "Light Yellow
WHEN 'LG'.
l_colorindex = 35. "Light Green
WHEN 'LT'.
l_colorindex = 34. "Light Turquoise
WHEN 'PB'.
l_colorindex = 37. "Pale Blue
WHEN 'LV'.
l_colorindex = 39. "Lavender
WHEN 'WH'.
l_colorindex = 2. "White
WHEN OTHERS.
l_colorindex = 2. "White
ENDCASE.
CALL METHOD OF g_excel 'Cells' = g_cell1
EXPORTING #1 = i_row1
#2 = i_col1.
CALL METHOD OF g_excel 'Cells' = g_cell2
EXPORTING #1 = i_row2
#2 = i_col2.
CALL METHOD OF g_excel 'Range' = g_cellrange
EXPORTING #1 = g_cell1
#2 = g_cell2.
GET PROPERTY OF g_cellrange 'Interior' = g_interior.
SET PROPERTY OF g_interior 'ColorIndex' = l_colorindex.
ENDFORM. " SET_COLOR
*& Form COPY_CELL
FORM copy_cell USING i_crow i_ccol
i_prow1 i_pcol1
i_prow2 i_pcol2.
CALL METHOD OF g_excel 'Cells' = g_cell
EXPORTING #1 = i_crow
#2 = i_ccol.
CALL METHOD OF g_cell 'Copy'.
CALL METHOD OF g_excel 'Cells' = g_cell1
EXPORTING #1 = i_prow1
#2 = i_pcol1.
CALL METHOD OF g_excel 'Cells' = g_cell2
EXPORTING #1 = i_prow2
#2 = i_pcol2.
CALL METHOD OF g_excel 'Range' = g_cellrange
EXPORTING #1 = g_cell1
#2 = g_cell2.
CALL METHOD OF g_worksheet 'Paste'
EXPORTING #1 = g_cellrange.
ENDFORM. " COPY_CELL
*& Form OPEN_TEMPLATE_FILE
FORM open_template_file.
CALL METHOD OF g_workbooks 'Open' = g_tmp_workbook
EXPORTING #1 = g_pc_template
#2 = 2
#3 = 0
#4 = 1
#5 = 0
#6 = 0
#7 = 1.
CALL FUNCTION 'FLUSH'
EXCEPTIONS
OTHERS = 0.
GET PROPERTY OF g_tmp_workbook 'Worksheets' = g_tmp_worksheets.
GET PROPERTY OF g_tmp_worksheets 'Item' = g_tmp_worksheet1
exporting #1 = 1.
GET PROPERTY OF g_tmp_worksheets 'Item' = g_tmp_worksheet2
exporting #1 = 2.
CALL METHOD OF g_tmp_worksheet1 'Copy'
EXPORTING #1 = g_worksheet.
CALL METHOD OF g_tmp_worksheet2 'Copy'
EXPORTING #1 = g_worksheet.
call method of g_tmp_workbook 'Close'.
CALL FUNCTION 'FLUSH'
EXCEPTIONS
OTHERS = 0.
ENDFORM. " OPEN_TEMPLATE_FILE -
Function Module for calculating hours between dates and their times.
Hi all,
Is there any standard function module for calculating the time difference in hours between two dates with start and end times.
Regards,
Sudipto.Sudipto,
How're you ????????????????????
Check out the following Function Module:
SD_DATETIME_DIFFERENCE (Give the difference in Days and Time for 2 dates)
Regards,
Abir
Don't forget to award Points * -
Function Module for PM Order Change?
Hello Everyone,
I want to change a plant maintenance Order's Header Data, operations list and object list.
Is there any existing function module for this.
R/3 version which I am using is 4.6c.
I have found a function module 'ALM_ME_ORDER_CHANGE' but unable to change any of the order's data using this.
Thanks & Regards,
SwatiHi,
Here is the Function Module : BAPI_ALM_ORDER_MAINTAIN
Reward Points if it is usefull..
Girish -
Is their any function module for deleting condition record i am trying
Hi Experts,
Is their any function module for deleting condition record i am trying this way.......
DATA: TABLE (4) TYPE C.
DATA: KNUM LIKE KONH-KNUMH
DATA: K_VEWE LIKE T681-KVEWE VALUE 'A'.
DATA: T681_STR LIKE T681.
DATA: LV_NUM TYPE I.
GET PARAMETERS
PARAMETERS: TABNO LIKE T681-KOTABNR.
PARAMETERS: TESTMODE DEFAULT 'X' AS CHECKBOX.
REFRESH INT_KNUMH.
Select single * from T681 into T681_STR
where kvewe = K_VEWE AND
KOTABNR = TABNO.
IF SY-SUBRC NE 0.
WRITE: / 'No entry in T681 for number ', TABNO.
WRITE: / 'Check whether corresponding condition table exists.'.
EXIT.
ENDIF.
TABLE = T681_STR-KOTAB.
SELECT KNUMH FROM (TABLE) INTO KNUM.
SELECT SINGLE * FROM KONH WHERE KNUMH = KNUM.
IF SY-SUBRC NE 0.
INT_KNUMH-KNUMH = KNUM.
COLLECT INT_KNUMH.
ENDIF.
ENDSELECT.
DESCRIBE TABLE INT_KNUMH LINES LV_NUM.
IF LV_NUM EQ 0.
WRITE: / 'No inconsistent entries found.'.
WRITE: / 'Each record in the condition table has a corresponding.'.
WRITE: / 'entry in the KONH table.'.
EXIT.
ENDIF.
LOOP AT INT_KNUMH.
IF TESTMODE IS INITIAL.
DELETE FROM (TABLE) WHERE
KNUMH = INT_KNUMH-KNUMH.
IF SY-SUBRC = 0.
WRITE: / 'KNUMH =', INT_KNUMH-KNUMH(10), ' deleted from table ' ,TABLE.
ELSE.
WRITE: / 'DELETE: SY-SUBRC is', SY-SUBRC , ' FOR KNUMH = ' .
WRITE: INT_KNUMH-KNUMH(10).
ENDIF.
ELSE.
WRITE: / 'TESTRUN: KNUMH =', INT_KNUMH-KNUMH(10).
ENDIF.
ENDLOOP.
is their any Standerd Function module for comparing tables if the condition record not exist in it has to exit if it is their then compare those two tables if not exist in one table also that has to be delete the condition record
Please let me know .....Hi,
You can use Function module PRICING_CHECK to check condition record. Do a where-used list on it to see how to call it.
Regards
Kiran Sure -
Function module for Open Sales Orders.
Can u any one tell me is there any standard function module to
retrieve OPEN-SALES orders. I tried to debug VA05 but not of use...
Thanks in advance,
Sanjay.hi
you can get open sales orders from vbuk and vbup
SELECT
A~VBELN
A~GBSTK
B~GBSTA FROM VBUK AS A
INNER JOIN VBUP AS B
ON AVBELN = BVBELN INTO TABLE T_OPENS
FOR ALL ENTRIES IN T_VBELN WHERE A~VBELN = T_VBELN-VBELN
AND A~GBSTK IN ('A','B')
AND B~GBSTA IN ('A','B').
in t_vebeln table is haveing sales orders by user selection you can get it like this
regards,
varma
Maybe you are looking for
-
Fake Adobe 24/7 help tech's
Hi: This is a warning. I posted an issue here on Friday and was contacted on Saturday via e:mail. The claimed to be with Adobe24/7 help requested to connect on Skype messaging. The icon on the Skype was Adobe helps. This tech and one that pho
-
Hi All, I want to reset the passowrd of portal of some users. when i go to user admin --->search and then click on modify , Iam unable to see the field such as automatic passowrd generation , Password and confirm password field for some of the users.
-
Volume levels when burning finished product
I just burned a project from imovie 11 onto a dvd using idvd. The volume came out much lower on the burned dvd than it was in imovie. Is this common? If I finalize and/or do expert settings and then burn the project, will that help? Or do I need to b
-
Online Availability of Sun ONE Application Server User Groups
The Sun ONE Application Server User Group community is now available online at http://developer.iplanet.com/usergroups/appserverhome.jsp Sanjay
-
Freigestellte Bilder von PS in PM
Eigentlich möchte ich etwas ganz einfaches erledigen. Man nehme ein Bild mit 4 Ecken und zeichne eine z.b. Elipse darum, danach Auswahl umkehren und dann Delete. Somit sollten ja die Ecken gelöscht sein. Wie bringe ich nun dieses Bild in den Pagemake