Is there any block in the Labview similar to that of clock block available in Matlab ?

Hi guys, i have generated a pulse in the matlab using the embedded block having some code in it and it takes the clock as one of it's input as shown in the figure.
Now i want to do the same in the Labview, but here i need a block which is exactly similar to that of the clock block used in Matlab.Kindly reply at the earliest. Thanks in advance.
Attachments:
2.jpg ‏33 KB
1.jpg ‏21 KB

The function you are looking for is available in LabVIEW Control Design and Simulation Module:
http://zone.ni.com/reference/en-XX/help/371894G-01/lvsim/sim_simulationtime/
This module is part of the Academic Version for LabVIEW.
Also, notice that your code from the competitor software has a 'implicit' loop around the formula node, which you can also do in LabVIEW by using:
1. Control and Simulation Node
2. Place it inside a simulation subsystem
3. Not using the Control Design and Simulation Module and using a For-loop around the node and controlling the time-step using index control (the 'i') and using multiply by a constant to simulate time. All this is abstrated inside the control and simulation loop, though.
One more thing... if you have the Module, look at the shipping examples under:
C:\Program Files (x86)\National Instruments\LabVIEW 2013\examples\Control and Simulation\Simulation
and look at the folder Utilities and Signal Generation. You should find those example exactly what you are trying to do.
Let me know if you have more questions.
Barp - Control and Simulation Group - LabVIEW R&D - National Instruments

Similar Messages

Is there any app for the ipadmini similar to the Assus Supernote Lite?

Is there any app for the Ipadmini similar to the Assus Supernote lite?

Hello,
There aren't any that I know off. I would drop UMT a line and see if they are planning to release something similar for Project Online in the near future...
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Is there any limit on the amount of data that can be read using DB Adpater?

We are trying to read large amount of data using "Select" of DB Adapter. I wanted to know if there is any limit to amount of records that can be returned in 1 message?
We have tried for 30K so far and no issues - but any clues on the threshold?

Hmmm...I dont think there is a restriction for reading data from tables.
I have fetched more than 65k data and it ran successfully.
Cheers,
Abhi...

Is there any solution to the colon translation bug?

Mac OS X has reserved characters that cannot be used in file or folder names. One of them is the colon: It is used by the operating system in paths to designated separate directories and files, exactly as Microsoft uses the backslash character for the same purposed.
However, Mac OS X is 'supposed' to translate colons to another character when saving files from within an application or the Mac OS X Save dialog. The typical translation is to forward slash or dash. For example, "Bug: Colon Translation" becomes "Bug- Colon Translation". Of if I am saving a web page to a PDF, the source name of an article with this title would change to "Bug/ Colon Translation".
The bug: The above colon translation process does NOT work reliably in the Mac OS X Save Dialog with reliability. I guestimate that 95% of the time the translation of colons in source titles does NOT work. Using the example of translating a web article title to a PDF saved file, the results are typically the following: "Untitled.pdf". This forces the user to copy then paste in the actual title of the article. THEN, 100% of the time, the colon translation actually works. For example, if I have a web article titled "Bug: Colon Translation", it is extremely rare for that title to be anything but BLOCKED, resulting in 'Untitled.PDF' as the resulting title in the dialog box. When I then copy and paste the source title into the title area, replacing 'Untitled', I get: "Bug- Colon Translation".
What will happen perhaps 5% of the time: The colon translation of the source title will actually work. When this occurs, using my example above, the OS provides the following translation: "Bug/ Colon Translation". Note that when it works in this situation I get a forward slash, not a dash.
I research, read and save web articles all day long. A lot of articles use colons. I have to contend with this bug all day long every day. This bug is many years old. I can't recall when it started. But it certainly has been consistent in Mac OS X 10.5 Leopard, 10.6 Snow Leopard and now 10.7 Lion. Three versions of Lion are enough for me to realize that Apple is either oblivious to this bug or they don't care.
Clearly, the colon translation CAN work. It is MEANT to work. No one can dispute that. The user is NOT supposed to be messed over with 'Untitled.PDF' files. They are MEANT to have actual PDF file titles, as seen in our example above.
Therefore the question:
Is there any solution to the colon translation bug?
It is incredibly annoying.

My guess is they don't care. Most likely they're illiterate and don't know what a colon is for. They probably think it's a little-used character. Remember: these are the people who don't know the difference between "deprecate" and "depreciate".
I have the same colon problem as you do. But it's not the biggest problem I have encountered in Lion. If it was only that I'd be Mr. Delighted with Lion. There's worse than having a colon - uh - that won't cooperate. A lot worse, in Lion.

My iphone has been lost in my house and i need to find a way to track it and its offline. it wont connect to the internet so there isnt a way to use find my iphone. i just want to play a sound on it. is there any way i can get a app that connects my ipod

my iphone has been lost in my house and i need to find a way to track it and its offline. it wont connect to the internet so there isnt a way to use find my iphone. i just want to play a sound on it. is there any way i can get a app that connects my ipod from a laptop or a different way to find it.

If your phone is offline, the ONLY way to find it is to look for it the old fashioned way. Your phone CANNOT be located electronically if it's offline.

Is there any hope for a Nano 6th gen that went through the washing machine?

Is there any hope for a Nano 6th Gen that went through the washing machine? All of the devices contents are showing up in iTunes when connected but the device itself is not working.

Hello kpratta,
There is some hope. I have heard of someone putting the ipod in a bag of dry rice and putting the bag in a dark place for a 4-5 days. After that they used this:
www.apple.com/support/ipod/five_rs/
This has the best chance. The rice absorbs any liquid in the ipod.
Hope this helps.
~Julian

Is there any restriction on the length of all Primary keys in a table

Hi all,
Is there any restriction on the length of all Primary keys in a data base table?
i have some 10 fields as primary key in a DB table and length exceeds 120 and getting a warning.
Please let me know will there be any problems in future with respect to the same?
With regards,
Sumanth

Well actually there are constraints like
Total of internal lengths of all primary key columns        1024 Bytes
Number of primary key columns per table                     512
For other information about SAP database please refer to http://sapdb.org/sap_db_features.htm
Thanks & Regards,
Vivek Gaur
Alwayz in high spirits

Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happen

Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happened any idea what causes this??
iMovie '08, Mac OS X (10.5.8), FCE 4

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Is there any difference of the Downloading speed of Folio if i'm in Enterprise or Professional Editi

Hi Adobe,
I have compared the downloading time between Adobe Multi-Viewer and Zinio App(also hosting digital magazine), I found out that it is so much faster in Zinio.
Are there any difference of the downloading speed if let's say the I'm in Enterprise or in Professional edition?
Thank you for the response!

There is no speed throttling that I’m aware of.
Bob

JPA and CAF BO - are there any editors of the JPA data (like CAF)?

Hello!
As you know SAP invented some layer above JPA and called it CAF. There is a very convenient way to edit data in CAF.
But now I have to create a complex database scheme, also with CAF doesn't allow us to work with objects. So we can't use someObject.getChildren().
So my question is are there any editors of the JPA data (like it is done in CAF)?

Hi Kirill,
at the beginning of our project at the end of 2009, we did a deep analysis of CAF since our architect vehemently suggested to use this framework.
First about the history and purpose of CAF: Initially, CAF was never meant to be a layer above CAF since CAF was invented in the time before EJB 3.0 and JPA standard where writing persistence with EJB 2.x CMP forced the developer to write pages of boiler plate code. This background was approved by SAP.
With upcoming of JPA, CAF ist mostly useless (except for very simply structured data) and prevents you from writing good software.
It is easy just to write @Entity, @Id and @OneToMany (for complex database schemes) and CAF forces you to use an ugly, imperformant database scheme (e.g. CAF uses mapping tables even for 1:n relationships, a clear antipattern!)
The CRUD-services generated with CAF are a pain, too. Usage of pessimistic locking is not up to date for web applications.
With your complex database schemes, you exceed the limit of CAF.
(We decided not to use CAF and did never regret this.)
Concerning your question: There is an "JPA Details" view in NWDS that might help you. It needs JPA Persistence facet on your project to work. Developed by SAP. For JPA beginners, it is a good cheat sheet for JPA annotations and their attributes.
You do not need more since a JPA POJO is easy to code.
Regards,
Rolf

Is there any way to set a password so that txt messages only open when the password is entered

Is there any way to set a password so that txt messages only open when the password is entered?
Please help! Thanks for reading:)

Hello Damien,
There is an option to set a passcode for the entire iPhone. You can use the following steps to set this up:
You can configure a passcode for your iPhone, iPad, or iPod touch using Settings > General > Passcode Lock.
Once enabled, you will be prompted for the passcode whenever you:
Turn on or restart the device
Wake the device
Unlock the screen
Note: You can specify the amount of time the screen must be locked before requiring a passcode.
You can find the full article here:
iOS: Understanding passcodes
http://support.apple.com/kb/ht4113
Thank you for using Apple Support Communities.
Best,
Sheila M.

Is there any limitations to the maximum number of dimensions in MP?

hi all
Is there any limitations to the maximum number of dimensions can be created in Multi provider. If so how what is the maximum number of dimensions that can be created in a multi provider?
regds
haritha

Hi,
Maximum number of dimensions 16. Out of 16, 3 are system defined
1.Datapacket
2.Time
3.Unit
It is restricted to 16 because the maximum no of dimensions in any database is 16.
Reward points if helpful
Cheers
Raj

Is there any truth to the rumor that there is a virus attacking iphones in the form of an iOS update?

Is there any truth to the rumor that there is a virus attacking iphones in the form of an IOS update?

Absolutely not.
There was a new piece of iOS malware discovered recently, but it, like all other known iOS malware, requires that the device be jailbroken. If your iOS device isn't jailbroken, there's no known malware capable of infecting it.

Is there any documentation regarding the fuego.fdi.* libraries

Is there any documentation regarding the fuego.fdi.* libraries
thanks

Hey lloyd,
It looks like there is!
Within Studio, click on the 'Documentation' flap on the bottom of the screen.
Then, open the project flap, and navigate to Catalog -> Fuego -> Fdi
Double click on any of the individual components, and its documentation will appear within the documentation flap on the lower portion of the screen.
If you don't see any documentation, check the tabs at the top of the documentation flap - the tabs allow you to switch between the documentation for the current method you're working on, and the component you've selected.
-Noel

Hello. I have two version of Office for Mac. 2008 and 2001. I want to delete the 2008 version. If I use the removal tool within the Offie 2008 folder, is there any danger of the 2001 version being removed too. Thanks Dave UK

Hello. I have two version of Office for Mac. 2008 and 2001. I want to delete the 2008 version. If I use the removal tool within the Offie 2008 folder, is there any danger of the 2001 version being removed too. Thanks Dave UK

Do you mean Office 2008 and 2011 or do you really want Office 2001? I think you mean 2011 since Office 2001 wouldn't make much sense.
The Office uninstaller should be able to identify there are two versions and allow you to delete either one or both.

Is there any block in the Labview similar to that of clock block available in Matlab ?

Similar Messages

Maybe you are looking for