Is there any fmodule for display of workitems of object

Hi
iam looking for a fmodule to get the workitem details of a particular business type. i HAD GOT 'SWI_WORKITEMS_OF_OBJTYPE_GET' but the only problem with this fmodule is it is not displaying the agentid's .So is there any fmodule that displays the wrkitems of a particular busobj with the details of agentid,workitemid,priority and status..
Thanks In Advance
Vicky

Hai Vicky
Check with the following Function Modules
1)SWI_GET_COMPLETED_WORKITEMS
2)SWI_GET_DEPENDENT_WORKITEMS
3)SWI_GET_RELATED_WORKITEMS
4)SWI_WORKITEMS_OF_OBJECT_GET
5)SWI_WORKITEMS_OF_OBJTYPE_GET
also check the standard sap Program 'RSWIDONE'
call function 'SWI_GET_COMPLETED_WORKITEMS'
       tables
            end_date    = end_date
            task_tab    = task_tab
            user_tab    = user_tab
            worklist    = i_swwwlhead
       exceptions
            read_failed = 1
            others      = 2.
Thanks & regards
Sreenivasulu P
Message was edited by: Sreenivasulu Ponnadi
Message was edited by: Sreenivasulu Ponnadi

Similar Messages

Is there any way to display filenames or captions for photos?

is there any way to display filenames or captions for photos?

Thanks. There are so many it's very hard to see which one does what. Since I edit on the MacBook Pro using Photoshop Elements, all I really need is a way of seeing the filenames, and secondarily re-arranging thumbnails on the iPad screen manually.

Is there any pen for iPad with retina display ?

Is there any pen for iPad with retina display ?

Yes. The Bamboo stylus is fully supported. Only the soft rubber tipped side. The Pen side obviosuly not.
Note all stylus that work with the iPad are noticeably thicker than a pen or pencil, so precision is not something you'll get much of.
Look at the link I provided, all those stylus work with iPad. See if you like one of those. Or if you can fnd one of those were you live.

Are there any solutions for Apple Studio display connectivity to a new Air?

Are there any solutions for Apple Studio display connectivity to a new Air?

Again.. I have an Apple Studio Display (17", LCD)
and want to run it on a new MacBook Air.
Specifications at:
http://support.apple.com/kb/SP110
Any solutions or advise?

Is there any functionality for AVERAGE in ALV, like do_sum, subtot?

Hi Experts,
In my_alv report, am doing sub/totals for prices, by using do_sum, subtot functions.........fine. But, I need to do/display the AVERAGE value for Discount % column?
Is there any functionality for AVERAGE in ALV, like do_sum, subtot?
thanq

hi
check these links out
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
regards
vijay
reward points if helpful

Is there any list for out of the box portlets that come with portal installation.

Is there any list for out of the box portlets that come with portal installation?
Ramesh

Yes - it's in the online help, on the Learning About Your Portal : About Portlets page. Here is the content:
Portlets Created Upon Install
The following portlets (and their necessary portlet Web services and Remote Servers) are created when you install the portal:
Folder Expertise:This portlet displays the list of folders for which the user is an expert. It is added to the User Profile page by default.
General Information:This portlet displays the default Profile Page. It is added to the User Profile page default.
Managed Communities:This portlet displays the list of communities managed by the user. It is added to the User Profile page by default.
Portal Login:This portlet allows users to log in to the portal. You probably want to add this to the guest user's home page so that users can log in from the default page displayed when they navigate to your portal.
Portal Search:This portlet allows users to search your portal and access their saved searches. Users might want to add this to their home page for easy access to their saved searches.
The following portlet templates (and any necessary portlet web Services and Remote Servers) are created when you install the portal:
Community Links:This template is used by the portal to create portlets that display the links saved in a Community Knowledge Directory folder. To learn more about Community Links Portlets, see Community Links Portlets.
Content Snapshot:This template is used by the portal to create portlets that display the results of a Snapshot Query.
You can also install the following functionality as part of the Optional Enterprise Web Components:
[url[/url]Stored Content:This portlet template allows you to create portlets that display stored content that is periodically refreshed. You might use this type of portlet to display content that is resource-intensive or takes a long time to generate. To learn more about Stored Content portlets, see Stored Content Portlets.
[url[/url]XML Source:This portlet template allows you to create portlets that can collect XML content from an external source and display it in the portal as HTML. To learn more about XML Source portlets, see XML Source Portlets.

Is there any app for phone auto start after swithced off??

Is there any app for phone auto start after swithced off??

Are you looking for an app which will startup the Z10 at a specified time?
I don't know of one. I have a feeling once OS 10.2 is available you'll see apps such as this.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Alert Rules vs Alert Category - Is there any limitations for multiple rules

I have an alert configuration implemented already and i want to add few more rules for the same alert category. While creating the rules for new set of scenarios, I am able to create only one rule . Is there any limitations for having the rules per category ?

Hi,
If the Suppress Multiple Alerts of This Rule checkbox is selected (default setting), then no further alerts are generated once the rule has been met until the first alert has been confirmed.
There is no limitation of creating alert rule for a particular alert category.
Check out the steps of Alert rule configuration.
Creating Alert Rules
To create an alert rule in which you use a defined alert category, proceed as follows:
       1.      Give the rule a name (Description).
       2.      Select the alert category that you want to use by clicking the corresponding category in the alert category table.
       3.      If necessary, specify conditions for the sender or receiver, or both.
○       If your rule results in alerts that must be assigned to a specific message, select the option Yes for the Bound to Message condition.
○       If your rule results in alerts that are not assigned to a message, that is, they are caused by errors that occurred before the message was sent, select the option No for the Bound to Message condition.
In this case you cannot enter any further details about the sender or receiver.
○       If the rule is to cover both cases, select the Not Relevant option.
       4.      If required, restrict the errors further to:
○       Errors reported from the Integration Engine (with or without error category or error code)
○       Errors reported from the Adapter Engine (with or without adapter type)
You can enter an asterisk (*) in steps 3 and 4. You can enter just the asterisk, or enter it at the start, end, or start and end of a string.
       5.      To add the new rule to the list of alert rules, choose Add Rule.
If the Rule Activated check box is selected (default setting), the rule is automatically activated when you add it and is displayed as active.
If the Suppress Multiple Alerts of This Rule checkbox is selected (default setting), then no further alerts are generated once the rule has been met until the first alert has been confirmed.
Once you have created a rule, it is automatically displayed in the list of alert rules. If you want to display the conditions of a rule, select a rule in the list and choose Show Conditions.
Hope this will help you.
Regards
Aashish Sinha
PS : reward point if helpful

Is there any heirarchy for retreiving theorg unit or sales office data for

Hello,
If there is only one crm user which is assigned to different sales offices,then while monitering any activity from which sales office or org unit does the data is displayed.
Is there any heirarchy for retreiving theorg unit or sales office data for an employee?
regards,
divya

IF NOT it_vbrk[] IS INITIAL.
Fetching Material no, sub-family, tint and coating codes
    SELECT vbeln posnr fkimg vrkme prsdt netwr matnr arktx mwsbp subfam
           codcol codcoat epaiscom codtyp length width
           INTO CORRESPONDING FIELDS OF TABLE it_vbrp
                       FROM vbrp
                           FOR ALL ENTRIES IN it_vbrk
                           WHERE vbeln   = it_vbrk-vbeln AND
                                 subfam IN s_subfam AND
                                 codcol IN s_codcol AND
                                 codcoat IN s_coat AND
                                 epaiscom IN s_thick.
endif.

Is there any provision for viewing Sales Order at a plant level?

Salute All !
Is there any provision for viewing Sales Order at a plant level?
Please provide TCode or any other way.
Rgds
Srivastav

Hi
Go to SPRO>Sales & Distribution>Sales>Lists>Define selection criteria.
Select the Programme "SAPMV75A" , Trnsaction group=0 and pu display group=K and select the field =WERKS.
Hope it will resolve.
Regards
Sanjay

Is there any Bapi for assigning CreditcontrolArea to Salesarea

Hi Experts ,
Is there any Bapi for assigning CreditcontrolArea to Salesarea
Thanks in advance

Hi Mugu,
WELCOME TO SDN.
refer to the BAPI below:
BAPI_MATERIAL_GETBATCHES
Create Batch List for a Material
to display:
BAPI_MATERIAL_DISPLAY Display Material
refer to the link below for other BAPI's:
http://www.sapbapi.com/bapi-list/
With luck,
Pritam.

SC Header CUF : is there any retrofit for SRM40 ?

Hi,
I am currently using an SRM40 SP12 system.
I need to create SC header CUF, however it seems that it cannot work until SRM50 ???
Is there any retrofit for SRM40 ?
Kind regards,
Yann

Hi,
Please find the below mentioned BADI's:
MB_BAPI_GOODSMVT_CREATE
MB_BATCH_MASTER
MB_CHECK_LINE_BADI
MB_CIN_LMBMBU04
MB_CIN_MM07MFB7
MB_CIN_MM07MFB7_QTY
MB_CROSS_SYSTEM_SAP
MB_DOC_BADI_INTERNAL
MB_DOCUMENT_BADI
MB_DOCUMENT_BADI
MB_DOCUMENT_UPDATE
MB_MIGO_BADI
MB_MIGO_BADI
MB_MIGO_ITEM_BADI
MB_RES_BAPI_CREATE1
MB_RES_BAPI_DETAIL1
MB_RES_BAPI_DETAIL1
MB_RESERVATION_BADI
MB_STOR_LOC_BADI_GTS
If you need to find any BADI for any transaction:
1. Goto TCode SE24
2. Give CL_EXITHANDLER and click on Display.
3. Put break-point in GetInstance Method and
4. Run any TCode. If there exists any BADI, they are displayed.
Reward Points if helpful
Regards,
Harish Kalla

My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

I have an iphone and an ipad (which are connected by the same apple id) i broke the phone and sold it but i didnt get to factory reset it because it was broken, is there any way for me to wipe my iphone from my ipad?

i have an iphone and an ipad (which are connected by the same apple id) i broke the phone and sold it but i didnt get to factory reset it because it was broken, is there any way for me to wipe my iphone from my ipad?

Try this:
Open the "Find my iPhone" app on your iPad, fill in your AppleID and password at the start up screen, and you should see a list of all your devices and their current location, if connected to a Wi-Fi or mobile data network. Devices not connected will be shown as "offline". But you can still trap on the icon and hit "erase iPhone" in the right hand window.
If your iPhone is not listed, you did not activate this feature during the setup of the phone and it can't be erased remotely.
If the phone is listed, even as offline, tap on "erase" to send the erase command. The next time your device will be connected to any kind of network, the content will be erased.

I accidentally formatted my portable hard drive when setting it up for time machine. Is there any way for me to get back my lost files?

I have an external hard drive of the brand Western Digital.
Before I got my iMac I moved a lot of my important files from my PC to the hard drive and today I went on and connected it to my iMac to move my files over to it.
When it had connected a window popped up that asked if I wanted to use this hard drive with the program Time Machine and create backups. Without thinking it trough enough and reading the warning properly (I'm stupid I know) I clicked "yes". I then realised how stupid it was and cancelled the formatting of the hard drive. But somehow the program still managed to delete all my important files and can't find any way to get them back. Neither can I connect the hard drive to my PC anymore so I can't check if the files are still there (which I doubt they are since I can't see them on my iMac either).
And now I wonder: is there any way for me to get back my lost files or are they lost forever?
Thank you in advance!
//Gina

A data recovery specialist or some data recovery programs should be able to help. Most format simply rewrite the directory tree saying no files are on this disk. The bits that represent the files are still flipped appropreiately so they still exists, you just don't have the location info to get at them. Secure formats and erases rewrite each bit to a zero or 1 or random so the data is then truely gone. This type of format takes a long time to complete.
I'm not making a recomendation of a particular program but here is one company that does what you ask:
http://www.remosoftware.com/mac-recovery The cost is pretty high but I'm sure they don't sell many copies and need to cover their development costs.
Good luck and don't write anything on the freshly formatted disk until you decide what to do.

Is there any fmodule for display of workitems of object

Similar Messages

Maybe you are looking for