Is there any program to read the archived information structrue data ?

Hi,
The tcode MCSX can archive information structure, however it can't read the archived data, is there any program has this function?
Thanks.

Hi
You may look into some of the FMs mentioned below.
ARCHIVE_GET_NEXT_OBJECT
ARCHIVE_OPEN_FOR_READ
ARCHIVE_READ_OBJECT
ADDRESS_READ_ARCHIVE_OBJECT
Also in SE37, you can put a F4 on ARCHIVE to get some FMs for this purpose.
You can consult with your technical guy, who can give some insights into this.
Hope this helps you.
Reward if this helps.

Similar Messages

I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

I can think of two possible stumbling blocks:
What are your 8.6 options for "byte order" and "prepend array or string size"?
Overall, many file IO functions have changed with LabVIEW 8.0, so there might not be an exact 1:1 code conversion. You might need to make some modifications. For example, in 7.1, you should use "write file", the "binary file VIs" are special purpose (I16 or SGL). What is your data type?
LabVIEW Champion . Do more with less code and in less time .

Is there any program to change the color of requests

Hi,
I want to know is there any program to change the traffic color of requests.
It is showing wait time until 'next months' date'.
The option to change time out is greyed out in the Infopackage schedueler.
Please sugegst anything.

In RSMO Settings -> incorrect waiting time for request -> Change the time
Regards,
B

Is there any way to link the individual rows of data to the corresponding bars in a bar chart so that each legend title appears simultaneously with its corresponding bar when creating a build? I can do it in a pie chart but can't in a bar chart.

Is there any way to link the individual rows of data to the corresponding bars in a bar chart so that each legend title appears simultaneously with its corresponding bar when creating a build? I can do it in a pie chart but can't in a bar chart.

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

Is there any script to scrabble the salary information in oracle apps HCM.

Hi,
Is there any script to scrabble the salary information in oracle apps HCM.
regards
Edited by: Maya on Feb 12, 2013 11:43 PM

Hi Maya,
We've used a tool called Data Masker (http://www.datamasker.com/) to mask our entire eBusiness Suite database in order to make the environment suitable for training and offshore development (financials, hcm, iproc, etc) - there's an evaluation copy of the website if you want to give that a go, in the background it's just using SQL scripts to manipulate the data.
If you just wanted to scrabble the Salary information (grades & spinal points / salary?) a couple of API's would probably be sufficient (HR_ASSIGNMENT_API.update_emp_asg_criteria, HR_SP_PLACEMENT_API.update_spp), or if you're not concerned with keeping the instance supported by Oracle then a few direct table updates to fiddle the information around (PER_PAY_PROPOSALS, PER_SPINAL_POINT_PLACEMENTS_F, etc).
Regards, Jay

Hi gurus is there any program that shows the history material

hi there gurus,
is there any report or porgram that shows the history of the material for the past 12 months.
hope to hear from you guyz as soon as possible, since this is kind of very urgent.
thanks,
vasan

hi gurus,
i want a report something shows this things in it,
Materials No
MBEW-matnr
makt-maktx
MBEW-LBKUM
UOM
MARA-MEINS
Total value (MYR)
MBEW-SALK3
Consumed Past 12 months Consumed Past 12 months
qty value (MYR)
Consumption(Qty) MB51 sub cond mvt 543 Consumption
DAYS SINCE CONSUMPTION
i try to create a program but having some problem with it,
if its possible for u to have a look into my coding,and giveme some advice with it.
thanks.

Is there any way to read the field name,through the property binded to it.

Hi
I want to know that,is there any method exits with which i can find the field names of the screen,if i have the property attribute with me.
as my req is to make the validation for the property attr,& check how many fields are binded with the single property attr,i have read the property attr dynamically,now need to find the fields linked,& need to check how many fields have not field value,& through the error msg.

just read the attribute binded to properties using code wizard ( Control + F7).
Code generalted will be like :
DATA lo_nd_cn_check TYPE REF TO if_wd_context_node.
    DATA lo_el_cn_check TYPE REF TO if_wd_context_element.
    DATA ls_cn_check TYPE wd_this->element_cn_check.
    DATA lv_ca_check LIKE ls_cn_check-ca_check.
navigate from <CONTEXT> to <CN_CHECK> via lead selection
    lo_nd_cn_check = wd_context->get_child_node( name = wd_this->wdctx_cn_check ).
get element via lead selection
    lo_el_cn_check = lo_nd_cn_check->get_element( ).
get single attribute
    lo_el_cn_check->get_attribute(
      EXPORTING
        name = `CA_CHECK`
      IMPORTING
        value = lv_ca_check ).
Here i have read attribute CA_CHECK.

Is there any way to read the pdf file in java

Hai,
i need some advice from anyone that is there anyway to read the pdf file directly from java...
Without converting to other files(txt,html)
if it is possible please help me..
Thank you

Or use the Adobe one (search the adobe site). Or search this forum, this is one of the Top Ten Qestions Asked here.

Is there any way to name the records from a data merge?

I have a spreadsheet, that has all the names for the images I'm using for a data merge. What I want to do is name the resulting records after the filenames in one of the columns in the spreadsheet. Is there anyway to do this? Or is there some other way to individually name the records from a data merge? I don't have any scripting prowess, so I can't really mess with that. Any help is greatly appreciated! Thanks!

You merge it along with the others, just like any field. ID cannot do the naming for you during the merge, but most spreadsheets have lots of logic capabilities that should allow you to extract a name for the record from the filename in the column of your choice. The only reason ID knows to find the image instead of writing the filename is that you've used a special name for the field.

Is there any way to read the data from an excel file w/o using a loop structure?

I am retrieving a large amount of data (multiple sheets) from an excel file and would like to extract the entire range without retrieving individual cell values(too slow). I can write an range all at once but cannot read it.

If you are able to write a block of data, then you should be able to read a block. The four requirements that you want to verify are:
1. The Range specified must match the exact size and location of the data block you want to read
2. The returned data is in a 2D array of Variants (either strings or numbers)
3. Use Variant to Data to convert to 2D DBL or 2D Strings
4. Check for the correct orientation for your application (use transpose if it is not)
Michael Munroe
Certified LabVIEW Developer
www.abcdef.biz
Michael Munroe, ABCDEF
Certified LabVIEW Developer, MCP
Find and fix bad VI Properties with Property Inspector

Is there any way to read the Value mapping input values dynamically?

Hi all..
I have a scenario where i have used value mapping. now the issue is when the input is not having any corresponding output value in value mapping then i should get null as output. can anyone suggest how can this be achieved?..
Regards
Anu.

Hi,
Do you know if the value in not maintained/found in the value mapping then it returns the same value as a result at runtime.
So, simply if and else will help you to get your desired result..
SourceField ---> ValueMapping------>|
|----->equalS---IF---->Then -----> Map constant (null) ----> Target
SourceField------------------------>|
Else ---->map (SourceField ---> ValueMapping) --->Target.
Regards,
Sarvesh

Is there any way of editing the lens information?

Hi,
I've noticed that when I use my Sigma 10-20mm lens, A3 can't determine which lens it is, so it suggests a number of options:
Canon EF 300mm f/4L IS or Sigma 10-20mm F4-5.6 or 12-24mm f/4.5-5.6 or 14mm f/2.8
Can I manually change this info? Preferably I'd like A3 to correctly identify this lens automatically once I've changed it.

If you referring to the EXIF data then you can't change that from within Aperture. Aperture treats the EXIF data (except for date and time) as read only. You'd have to use an external EXIF editor to set the data before importing into Aperture.

Is there any way to give an archive attribute a variable?

Is there any way to get the archive attribute to take a variable?
What I want to do is to be able to change the value in an XML file and have that read at run time.
For example, what I have now looks like this:
<jsp:plugin code="Display.class" archive="http://myserver:8080/myapp/Display.jar" height="650" jreversion="1.5" type="applet" width="800">What I would like to do is to be able to give the archive a variable, just like you can with value arguments. I tried doing this:
jsp:plugin code="Display.class" archive="${Display.jarUrlValue}" height="650" jreversion="1.5" type="applet" width="800">But that didn't work. It threw this:
com.sun.web.ui.appbase.ApplicationException: org.apache.jasper.JasperException: /Display.jsp(14,161) The archive attribute of the jsp:plugin standard action does not accept any expressions
com.sun.web.ui.appbase.faces.ViewHandlerImpl.destroy(ViewHandlerImpl.java:534)
com.sun.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:301)
So, is there any way around it, or should I take the error message verbatim?
Thanks.

Is there any way to get the archive attribute totake a variable?
According to the [url
http://java.sun.com/products/jsp/syntax/1.2/syntaxref1
215.html#8837] reference, no you can't providea runtime expression to this attribute.
Yeah, I know it said that but I was hoping there was some sort of hack around it. Seems to be a bit of an oversight to me.
Oh well!

Any program for Deletion the normal Parked documents in Standard SAP

Hi All,
is there any program for delete the normal parked documents in Standard SAP ?? we have nearly 2000 documnets so we can't do manually one by one at FBV2/FBV6.
please help.
Raj

Hi,
You can create a CATT/LSMW project, by recording the relevant transactions and then make a mass change by executing it.
Regards,
Eli

Is there any way to extend the roaming data expiration period?

The title says it all:)
Is there any way to extend the 30-days roaming data expiration period?

No, this is not controllable directly by apps or by users (and 30-days is not contractual).
If your app needs to store data in the cloud perpetually then you'll need to use your own server.
If the app is installed then roamed data will still be saved on the client systems until the user removes it.

Is there any program to read the archived information structrue data ?

Similar Messages

Maybe you are looking for