Is there any way to read the data from an excel file w/o using a loop structure?
I am retrieving a large amount of data (multiple sheets) from an excel file and would like to extract the entire range without retrieving individual cell values(too slow). I can write an range all at once but cannot read it.
If you are able to write a block of data, then you should be able to read a block. The four requirements that you want to verify are:
1. The Range specified must match the exact size and location of the data block you want to read
2. The returned data is in a 2D array of Variants (either strings or numbers)
3. Use Variant to Data to convert to 2D DBL or 2D Strings
4. Check for the correct orientation for your application (use transpose if it is not)
Michael Munroe
Certified LabVIEW Developer
www.abcdef.biz
Michael Munroe, ABCDEF
Certified LabVIEW Developer, MCP
Find and fix bad VI Properties with Property Inspector
Similar Messages
-
I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?
I can think of two possible stumbling blocks:
What are your 8.6 options for "byte order" and "prepend array or string size"?
Overall, many file IO functions have changed with LabVIEW 8.0, so there might not be an exact 1:1 code conversion. You might need to make some modifications. For example, in 7.1, you should use "write file", the "binary file VIs" are special purpose (I16 or SGL). What is your data type?
LabVIEW Champion . Do more with less code and in less time . -
If meta data LUN is totaly destroied , is there any way to rebuild the data from the video LUN
If meta data LUN is totaly destroied , is there any way to rebuild the data from the video LUN ????
What happened to your metadata? Are you sure the metadata is gone?
In theory, file carving could be attempted on the data LUNs, but you would need a tool that understands how Xsan lays out data across LUNs in a stripe group and hope your fragmentation isn't too bad. I doubt such a tool exists, but if one does it almost certainly is not publicly available. You should probably contact a data recovery service with experience recovering data from Xsan. Do that before you do anything else if this data is really important. -
Is there any way to retrive the data from my USB Key
Hello,
I have a usb key I have been using on a Win 7 desktop computer and a Mac Book Air to put in Data on a spread sheet.
I interchange to put in the data between the computer and my MBA without any problem.
I am today not able to open the usb memory key in either-Computer or the MAC Book Air.
Does that mean I have a coruppted USB memory key and the data lost for ever?
I have just put the USB memory key in my computer and it says File System CDFS.
I put it in MAC Book Air and it would not open either!!
Is there any way to access my data. I have no back up...If the USB drive won't mount on either computer, it's probable that the drive has failed, in which case it's unlikely that you can recover any data from it. You can do a web search for something like "flash drive file recovery" and you'll find a number of utilities that purport to do file recovery, but all the utilities I'm familiar with require that the drive at least be mountable. There may be services that could attempt recovery, but they tend to be expensive.
The moral of the story is: never have only a single copy of a critical document, and if you must, never, never have your single copy only on a flash drive (or floppy, for those "old timers" who still use floppies).
Regards. -
My phone has split up the side after I dropped it down some concrete stairs and now it won't switch on, so I need to know if there is anyway to recover the data from it, such as phone numbers, photo's etc. Anyone had this problem?
I've tried plugging it in to the computer but it doesn't do anything, and tried plugging it in to the wall to see if that will switch it on, but nothing.
Any help gratefully received! SteveIf it will not turn on - you have zero chance of getting anything off the phone.
-
How to read the data from an excel file into MYSQL by java language
Hi all,
I have some data in excel spread sheet and I want to put the data into MYSQL data base. I created the tables in MYSQL> How can I write a program in JAVA that puts the value from excel sheet to mysql??
I would appreciate your help
regardsBy typing code at the keyboard... but presumably you meant to ask what code you should type.
To get data out of Excel there are a few alternatives. The Google keywords I would use to find them are "java excel". I use Apache POI but there are other possibilities, I believe. As for getting the data into MySQL once you have extracted it from Excel, you would use JDBC. But you already knew that, didn't you? You did find the JDBC forum.
In general it's better to ask a specific question on a forum. If you don't have a clue (which is the way we all start out) then just telling people that isn't going to be helpful. The best you're going to get is links to tutorials, which you could perfectly well have found for yourself by simple web searches. -
How can i Read the Data from such Excel files?
Dear All,
Here I am attaching an excel file in which all the datat cells have more than one data, can anybody tell me, how to read from such kind of excel files?
Thanks in Advance & Happy New Year,
RujutaGreetings Ruju,
Here is what I do to read such a file:
I first save the Excel file (xls) as CSV file (which is easier to handle: Comma Seperated Values) .. Open the file using Excel and save it CSV.
Then using the code attached I get all these values in a string array.
Hope this helps
Ayman Mohammad Metwally
Automation Engineer
Egypt - Cairo
Attachments:
CSV2ARRAY.vi 29 KB -
One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?
Wow, have seen Files do that, but a whole Folder as I recall!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
Is there any way to print the data inside the Notes field of MIR6 Report
Hello Gurús.
We need to include the data inside the Notes field in the report MIR6 - INVOICE OVERVIEW - report.
Is there any way to print the data inside (comments) the Notes field as well in the Report ?
We found that the only way is to open the Notes and print it, but it takes time, any idea ?
Rgds.
MCM.There's nothing built-in that does that. If you only have text fields and they don't have any formatting or other property that would prevent it (e.g., Date, character limit), you can run a simple script to populate each field with the field name, and then print. A more complicated approach would be a script that adds text annotations near/over each field that shows the field name. This would just be for documentation purposes, but it's possible. Post again if you'd like help with the first. You'll probably have to pay someone for the second approach if you don't want to do it yourself.
-
The phone is physically intact, but you can see the LCD is cracked behond the glass. I have tried plugging it in, tried putting it on the charger, and resetting it using the off and home buttons, bit response. I don't need the phone to work, but I do need to be bale to back it up in order to restore to the new phone. Is there any way to extract the data or back up the hard drive without repairing the phone? Just curious what my options are before I spend cash trying to fix the phone and find out there was another way to get the data. Any thoughts here or should a good repair shop being able to create a backup somehow?
Im not going to be much help because I don't know of anything else to besides take it somewhere that fixes electronics and see if they can get it off some how maybe if you take it to an apple store they can do something to get your information.
-
Is there any way to save the data on my ipod if it is in recovery mode and has to be reset?
Is there any way to save the data on my ipod if it is in recovery mode and has to be reset?
Only if this program will get the iPod out of recovery mode.
RecBoot: Easy Way to Put iPhone into Recovery Mode -
When my wife's Mac Book Pro was being updated to the latest version of OS X the laptop locked up at a grey screen with the Apple icon and status bar. Is there any way to recover the data and complete the install? I have not tried anything yet because of the data issue. I am not sure which OS X version as I did not install the software.
Used Macs of every description are always available on Ebay and Craigslist and from a plethora of online used-Mac resellers. Apple sells refurbished late-model Macs at 10-20% discounts with a new-computer warranty and the opportunity to extend the warranty with AppleCare.
http://store.apple.com/us/browse/home/specialdeals/mac -
If I use an SD Card on both the windows 7 and Mac OS (using bootcamp), is there any way to see the data seen on the Mac OS side while using the Windows OS?
Windows Aero style uses a different background image than Mac:
Windows Aero:
#nav-bar {
background-image: linear-gradient(rgba(253,253,253,0.45), rgba(255,255,255,0));
Mac:
#nav-bar {
background: url(chrome://browser/skin/Toolbar-background-noise.png),
linear-gradient(hsl(0,0%,93%), hsl(0,0%,83%));
I can't test hands on, but you might be able to clear that OSX "fog" using a rule such as:
@namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);
#nav-bar, #PersonalToolbar {
background-image: none !important;
background-color: transparent !important;
This could be applied using the Stylish extension or by creating/editing a userChrome.css file. -
Is there any way to read XML directly from a Web Page ??
i have a url, which on sending request, shows XML in browser.
Now i need to read this XML in browser and then manipulate it according to my need and display it on another page.
actually the process is. :
1) i have to first retrieve an xml from other site. (XML will only be shown in browser)
2.)then i have to read the Xml and show it in according to my requirements.
Is there any way to read XML directly from a Web Page ??
is their logic to accomplish this.
e.g in Servlet i can do somewhat like this :
String wholeXml=Somemethod(url);
Please Advicethe average Java XML parser will accept an InputStream, so just open an URLConnection to the webpage, get the inputstream from it and feed that inputstream to the XML parser. If the URL has valid XML data, it will get parsed without problems.
-
Is there any way to prevent the OS from querying the Superdrive when start
Just a random question. Whenever my MacBook Pro starts up (either from sleep or a complete/fresh start, the OS queries the drive slot to see if there is a disc present. While this may be normal behavior, it seems to slow down the start up process. (I rarely ever have a disc in the drive). Just curious if this, in fact, normal, or if there's something awry.
Is there any way to prevent the OS from querying the Superdrive when start
No
he OS queries the drive slot to see if there is a disc present.
How can you tell? Based on the noise it makes?
Maybe you are looking for
-
Sony HDR-HC7 and FCP 6.0.1
I have been having trouble capturing any 1080i footage. This is a new camera that I was recommended (since I was having trouble with the Canon HV20) and going through EASY SETUP I can't seem to capture. SD comes through fine but anything I do in the
-
Hi I would like to receive information and maybe an example on how do I could develop a pluggin or perferable JavaScript to read the DOM and present to the user information about the objects found to the Acrobat user. Thank you.
-
Create spool for background jobs which uses submit statement
Hi Gurus, I have a quick question regarding the backgroud jobs. When we run a program in the background , it should create a spool for us, but, the problem comes when I am running a program in the background, its not creating the spool.
-
Conversion of timestamp to_char in Apex variable & unable to use in PL/SQL
Hi, I am passing a timestamp from Apex as a varaiable to a PL/SQL trigger. 1) to_char in Apex, to_date in PL/SQL- Works Apex : to_char(systimestamp, ,'YYYY-MM-DD HH24:MI:SS') PL/SQL : to_date(systimestamp, ,'YYYY-MM-DD HH24:MI:SS') However I would li
-
Hi, Can any one advise on this. Can we load ICT data with YTD values. We have data for June and December, when we load data for december it is picking up junes data for YTD at December. for example I have ICT for June = 5000 at December I want load d