Is there any relation between oinv,inv1,owhs,oadm..

hi.
i am developing on layout in crystal report..
oinv,inv1,owhs, are i am including..
i put parameter is DocEntry..based on this one data is comming.
my question is can i add one more table oadm.....
is there any relation between these four table..
I need your valuable suggestions..

Hi Sriniva,
As per your requirement,
use below query to execute.
SELECT * FROM OINV
T0 INNER JOIN INV1 T1 ON
T0.DocEntry = T1.DocEntry
INNER JOIN OWHS T2 ON
T0.Filler = T2.WhsCode,
OADM T3
WHERE T0.[DocEntry] = '123'
Note : Just replace '123' with your DocEntry Number
Thanks & Regards,
Nishit Makadia

Similar Messages

Is there any relation between feilds " reason, code, code group , sub pro

is there any relation between " reason , code , code group , subject profile'
Actually i have make "reason" feild has default value ..
i have to do by RFC .
Cany any body plz reply from where i have to pick this reason feild and set reason feild has default value has " not started "
thanks,
aravind.

Hi,
Subject profiles are used in different areas like
Service
Complaint
Activity reason(Used in all documents like sales,service order)
There is a relationship between Codes, Code groups, code group profiles, Catologs, Subject profiles.
Do not confuse 'Reason' with 'Code' or 'Subject'(Not subject profile), all are same. In different contexts you call them with different names.
1. In IMG while creating codes you use the name "Code".
2. While entering details about activity in any business transaction you call it as a "Reason"
3. While entering the defect of the problem in Service or complaint doc. you use the name "Subject"
In all above cases it is equivalent to name "CODE' which you define in IMG.
Now coming to relationship of above mentioned entities, in any business transaction type customization you can select "business activity" as additional business transaction category. At the customizing header level of this bus. tran. category you are allowed to enter a "Subject profile" which controls your "Reason" field in the business transaction.
In a similar way for service or complaint order you are allowed to enter a "Subject profile" for entering "Subject" in respective transactions.
Each subject profile is assigned to Subject profile category like Service, Complaint, Activity reason etc.,
1. First define catalogs
2. For each catalog define code groups and codes( Code, subject, reason mentioned earler)
3. Create 'Code group profile' for each catalog and assign assign 'code groups' that are relevant for coreesponding catalog to 'code group profile'
4. Now finally create a "Subject profile" which is the combination of "Catalog and code group profile"
I think this would clarify your doubt.
Coming to default value in this reason field, the standard system will not support this. You sholud use some Badi to get this.
Reward points if it helps.
Murali

Is There any Relation Between PCD and SSO

Hi,
Is there any relation between PCD and SSO, why because if i am try to connect from portal to R/3 in the user mapping i got one error i.e some pcd error.
pls tell me how to rectify that.
Regards,
Jagadish Babu Kanikanti.

Hi Jagadish
The PCD is only a central persistance for storing Portal objects. There is no such relation between PCD and SSO that could create a problem. You can however check for the PCD error in this manner.
1. In the system administration role, choose System Administration -> Support. The Support Desk appears.
2. Select the area Portal Content Directory.
3. Click on PCD Configuration in the test and configuration tools. The next screen shows all the parameter values currently maintained for the PCD.
4. To reload the configuration, choose Reload.
Hope that helped.
Best Regards
Priya

Is there any relation between reversed IR & IR against which it was revsed

Hi All ,
   In a GR based IR scinario how i'll be able to trap fresh IR .
   I have a IR (****40) which is reversed.Reversed IR (****41).
   And another fresh IR(*****42) aginst GR .All have movement
type 102. I can get reversed IR by credit/debit indicator.But
I need to trap IR(*****40) which was revesed or fresh IR
(****42) .
Answer me if possible.Points will be awarded.
Thanks & Regards
Khusi
Edited by: khusi nanda on Sep 20, 2008 6:28 AM

But there will be some difference in the battery's of two model like any thing whatever it may be ,how to understand which one is mean for which cell if two cell phone's like one N-70 and other one is 1600 ,advice in this regard...And there must be some mechanism for that na...........

Is there any relation between Forte IDE and Forte 4GL

Can i get an evaluation copy of Forte 4GL ?

Forte 4GL has been previously known as FORTE Tool and was sold by Forte Software. SUN bought Forte Software and now they are offering it as part of their SunONE starter KIT that you can get by spending (that is what i remember) just $20 (american) Dollars.

Is there any difference between sun solaris 8 and windows for Garb.Collecti

Hi All,
is there any difference between refreshing the java virtual memory between sun solaris 8 and windows.i am fetching 25 records for every search action.in windows usage of java virual memory is 5 mb after every search it refreshes the memory.while using the same code in sun solaris 8 it throws heap out of memory error and for every search it wont refresh the memory.

Some other related links
http://java.sun.com/docs/hotspot/gc5.0/gc_tuning_5.html
http://e-docs.bea.com/wls/docs81/perform/JVMTuning.html

Is there any link between movement types and documents

hi
is there any link between sales doc and movement types ?
is it the only source dependig on schedule line movement type will determined?
if with out order we are doing delivery how system will determine movement type
Thanks in advance

Hi,
Deliveries that are created without reference to order , contained movement type because to process a delivery you need to have some of the control criteria that are copied from sales document header to delivery document header, as system processes delivery in that way ,that is why you will find default order type is assigned to the delivery document type ie DL. .which helps the delivery document to process without reference to sales document.
In Addition to above information,
In VOV4,
DL+ NORM + + -DLN
In VOV5,
For Itemcatagory DLN+ --CN
From this schedule line category CN,movement type 601 is taken during without reference to order delivery creation.
MCM

Is there any difference between R/3 4.7 version and ECC 5.0????

Hi All,
Is there any difference between R/3 4.7 version and ECC 5.0 for the transaction RSA5.
Regards,
Andy

Andy
Functionality wise I didn't see any difference other than new datasources in ECC5.0
Thnaks
Sat

Is there a relation between the Engineering Change Management and MM

Hi SAP MM Gurus,
Is there a relation between Engineering Change Management and Materials Management? I know we get the versions changes updated in Material Master. But do not know where is the origin for ECM. Step by step configuration is appreciable.
Thanking in Advance.
with regards
Ravi Babu

Hi ,
I have created an application and have created end users also who will be using this application. For each of these users i have to give access to application in such a way that they will be able to see only their area a work. So how do i do this ..this needs to done based on the login user_name..my question now is how or from where will i get the current session details like user_name, current session id ,current session date and time?
Thanks in advance,
Bhargavi

Is there any Link between BNK_MONI and DMEE

Hi ,
I have created EXIT Fucntion Module in DMEE Structure for PAYM Tree Type to udpate value of Reference Text node to show Custom value. Stand alone DMEE works fine for Testng purpose. But It does not work with BNK_MONI .
I am running following sequence of T Codes :
RVND --> F8REL --> F111 --> BNK_APP --> BNK_MONI ..
I want to update one of the fields in output file generated by BNK_MONI .
Is there any link between BNK_MODI and DMEE ?
Or shall I have to Debug background job created by F111 like it is done in case of F110 ?
Please suggest..
Edited by: Yogesh Gupte on Jan 27, 2012 6:59 PM

Hi,
Deliveries that are created without reference to order , contained movement type because to process a delivery you need to have some of the control criteria that are copied from sales document header to delivery document header, as system processes delivery in that way ,that is why you will find default order type is assigned to the delivery document type ie DL. .which helps the delivery document to process without reference to sales document.
In Addition to above information,
In VOV4,
DL+ NORM + + -DLN
In VOV5,
For Itemcatagory DLN+ --CN
From this schedule line category CN,movement type 601 is taken during without reference to order delivery creation.
MCM

Is there any Similar between Class.forName() and new operator ???

Plz tel me is there any Similar between Class.forName() and new operator ??? i have been asked this ques in interview

You probably should have used the other thread:
http://forum.java.sun.com/thread.jspa?threadID=792678
To add a little confusion to the matter...Class objects are in fact objects. They're objects representing classes. So, in a sense, I guess, you could say they're similar -- in each you get an object. But in practice Class objects and all other objects should be considered semantically different unless you're doing some pretty unusual stuff. Also Class.forName is more of a factory method than a constructor.

Is there a relation between Adobe Photoshop CS6 and Photoshop Premiere 12?

Is there a relation between Adobe Photoshop CS6 and Photoshop Premier 12. I am presently attending a course on CS6. Is there a certain similitude between these 2 logiciels?

Hi Luciebiss,
Photoshop is a professional tool used throughout many industries as the standard for digital image manipulation and painting. It has very rich, and often complex, tools and options. As such, it comes with a professional price tag.
Photoshop Elements is a consumer product. It's made for users who don't need as many features and complex options. It has a simpler design, guided workflows, and an organizer to help you manage your files.
Please refer to below link for more information.
https://forums.adobe.com/message/4568487
Thanks

Link between OINV,INV1 and OIBT,IBT1

i want link between OINV,INV1 and OIBT,IBT1 table so plz help me,
in which way i connect two table inv1 and oibt

Hi Vinu.........
Welcome to SAP Business One Forum............
Please check the link between these tables........
SELECT Distinct T1.BatchNum
FROM IBT1 T0
Inner Join OIBT T1 On T0.BatchNum=T1.BatchNum AND T1.ItemCode=T0.ItemCode
INNER JOIN DLN1 T2 ON T2.DocEntry=T0.BaseEntry AND T2.ItemCode=T0.ItemCode
inner join ODLN T3 on T2.DocEntry = T3.DocEntry LEFT JOIN INV1 T4 On T4.BaseEntry=T2.DocEntry Left Outer Join OINV T5 On T5.DocEntry=T4.DocEntry
WHERE T0.BaseType = 15
Hope this will help you........
Regards,
Rahul

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program?

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program? If not how do I clear off the old site so as to re publish with Iweb.

iWeb cannot import published files so you would need rebuild the site.
Yahoo hosting is notoriously poor and their tech support is awful. I would suggest you look for new hosting and start afresh. Some pointers for choosing hosting...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
If you do choose to go this route, transfer your domain name registration away from Yahoo to your new host.

Is there any incompatibility between Labview 8.5 and Traditional DAQ?

Hi, I`m using a DAQPad 6020E and the Labview 8.5 Daq assistant don`t detecte my DAQ when a try to create a new task (to create a new virtual chanel). But MAX detect the DaqPad. So, is ther any incompatibility between Labview 8.5 and traditional Daq? Do you know how can I resolve this?
Thanks.

First, you posted to the wrong board. Measure is an old add-on for Excel.
Second, there is no incompatibility between LabVIEW 8.5 and tradtional DAQ. There is an incompatibility between traditional DAQ and DAQmx which is what the DAQ Assistant uses. Make sure that you install DAQmx if your device is supported by it. Otherwise, you will not be able to use the DAQ Assistant.

Is there any relation between oinv,inv1,owhs,oadm..

Similar Messages

Maybe you are looking for