Is there any way to include the BizTalk Application Description after exporting the MSI?

Anything I put in my biztalk app Description field(see first image), it shows up in the Comments attribute of the exported MSI file. But if I edit the
Comment attribute(see second image) and then import the MSI file, the edited comment does not reflect in the BizTalk app description. How can I push that description from MSI file?

You can’t set the comment/Description property of the msi from the msi file. MSI is read-only, any changes doesn’t affect the conent of the msi. An
installer package is "compiled" by reading the instructions from the database and created as the .msi file.
When you export an application as msi, its details are retrieved from
BizTalkMgmtDb. In the case of description of the BizTalk application, it is retrieved from the
nvcDescription
column of the bts_application table.
select nvcName,nvcDescription from dbo.bts_application
Once msi has been exported it’s a complied package, any changes to the msi file are not updated to the content of the file. Same way when you import an msi into BizTalk, it actually create relavant
entries into the BizTalk databases.
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Similar Messages

I am setting up a new Time Capsule to replace another hard drive. Is there any way to include the the Time Machine history from the old drive on the new Time Capsule?

I am setting up a new Time Capsule to replace another hard drive. Is there any way to include the the Time Machine history from the old drive on the new Time Capsule?

Check item #18 of Time Machine FAQ, particularly the material in #3 of the "How to" section.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

Is there a way to include the sys.aud$ table in a full database dp export?

I am doing an export using the following parfile information:
userid=/
directory=datapump_nightly_export
dumpfile=test_expdp.dmp
logfile=test_expdp.log
full=y
content=all
However when I run this I do not see the sys.aud$ in the log file. I know I can do a seperate export to specifically get the sys.aud$ table but is there any way to include it in with my full export?
Thanks in advance for any suggestion.

here's more background infomation... I have some audits setup on my database for one of my users. Every quarter I have an automated job that runs that creates a usage/statics report for this person using data in aud$. at the end of the job I export the aud$ table and truncate it. However last quarter I found that there was a mistake in my report and my export did not run properly thus my audit data was gone. i also have full datapump exports that run daily but found that aud$ was not there. so that is why I thought I'd like to include sys.aud$ in the full datapump exports.
i understand why other sys tables would be left out of a full export but aud$ data cannot be reproduced so to me it makes sense to include it in a full export.
don't worry, we run our true backups using rman which is eventually how I got the aud$ data back by creating a copy of my database up until the time of the truncate. however this was quite time consuming.

By default, Teststand will not include the test step result in subsequence, is there any way to include these step result in report?

By default, Teststand will not include the test step result in subsequence, is there any way to include these step results in report?
Thanks
Jacky

Hi,
If your subsequence is in a separate sequencefile, then check the properties of the sequencefile to make sure that the record has not been disabled.
Regards
Ray Farmer
Regards
Ray Farmer

Is there any way to repeat the last action on a new selection?

I'm playing with Pages to see if I can use it instead of Word. I'm very expert with Word, just starting with Pages. Like some things, don't like some, but I think it's worth continuing to play with it to see if it will work for me. One problem I've been having is repeating an action. In Word, if you do something (in the particular situation I just had, it was deleting a row in a table), and then click on another place and do command-Y, it repeats what you did. Similarly, if you format a word as bold, say, and then select another word and do command-Y the second word will also be made bold. I realize the latter can be done in pages by selecting "emphasis" style for the second word, but I couldn't figure out any work-around for deleting the table rows (I tried selecting several non-adjacent rows, but "delete row" was greyed out on the actions menu). Any way to do this that I've missed?

Thanks anyway. I'm sorry that Apple didn't include a "repeat" keyboard shortcut - going to the Inspector and then the actions wheel and then "delete row" time after time wasn't fun.
I'm afraid I failed to communicate well about outline format - I didn't mean a bulleted or numbered list, I do know how to do that, but rather making a single character (or in my particular interest a symbol, the diamond and heart suit symbols) appear in outline text format. You can do it by going to format->font->outline, but if I want to do it for several occurrences of the same thing (or a few different things), it's not much fun to do it that way. But maybe I can define a character format that's outline and that will work. Still would prefer to have a keyboard shortcut to apply the character format though.
Incidentally, while I'm talking about diamonds and hearts, is there any way to change the amount of space that gets put in after the diamond and heart symbols if you insert them using Edit->Special Characters? I write a lot of documents that use those symbols and lines end up unevenly spaced because of the large amount of space below each symbol (I've figured out a partial work-around - I defined a style for "body after suit symbol" that is raised enough to get the line spacing right, but that only works when I want to have a hard return at the end of the line with the suit symbols, since if the lines wrap, both lines have to have the same paragraph formatting. This problem isn't really Pages related - I have the same difficult with Word .

Is there any way to do the following? Regarding score, and printing.

Hello,
My name is Kyle, and I just started using GarageBand. I have been a Mac user for quite some time, and I just recently purchased the Jam Packs. I have been a composer for about 5 years, and I am really interested in electronic music and the possibilities that it has. GarageBand seems to be a great program, and considering it is a program that is standard on Macs now makes a lot of wonderful technology available to the general public.
I have started using GarageBand to help me with some of my compositions, buy using the software instruments and improvising, to give me an idea of what some chordal structures sound like, and how I could interwieve some of the parts together. Is there any way to view the full score? I know that you can view the notes in note view, but is there any way to select multiple parts and view the score of the parts? This is something that I don't see, and I think it would be very helpful to view it as a full score, while also having the ability to do a single instrument input.
Also, I was wondering if there was any way to print the notation for each part? Also, this would be helpful from score view. I use Finale 2007 for my notation for compositions, and sometimes Sibelius 4. I would like to transfer some of the stuff that I have played into Finale, so that I can do a little more editing, and incorperate it into a piece. I don't want to have GarageBand open, and read it note for note. I don't think there is any way to export them either, so that Finale or Sibelius could read the notes and rhythms. Am I asking for too much from a program that is essentially free with my system? I just see a lot of potential for the program, and I know most of my friends who are also composition majors are Mac users. I think this could be easily fixed, if these things aren't available already. If anyone knows anything about this, or has any suggestions, please let me know, as this is something I would like to use more as a tool, and I feel has a lot more potential to grow into an even better program.

Thank you. I have heard of Logic Pro 7, but I have never personally used it. I'm still growing in the world of Composition, and I know that it is something I will be studying in one of my Computer Music classes coming up for my degree. I think it is something I will look into getting once I can justify the price of it. I guess for the time being, I will continue to play and grow in my ability to use and take advantage of GB, and then see what I can do about or with Logic Pro when I'm ready. The thought of spending $1000 for a program is hard to bite, because I've already spent a lot to produce my music, not only electronic music, but also chamber music and so on. I had no idea it would be so expensive to dive deep into the world of composition! lol.
Finale 2007: $500
Sibelius 4: $500
Jam Packs: $400
Midi Keyboard Interface: $100
PowerBook: $1700
Printer for printing scores and analysis: $150
Logic Pro 7: Oy!
As you can see it adds up very quickly...that doesn't even include my personal instruments and study materials.
Thank you for your input, as I haven't really worked much with LP, and therefore didn't know which features are available. I will talk with some of my Composition buddies, and professors and see what they have to say as well, and who knows, I may be able to get the express version through one of them.

Is there any way to print the data inside the Notes field of MIR6 Report

Hello Gurús.
We need to include the data inside the Notes field in the report MIR6 - INVOICE OVERVIEW - report.
Is there any way to print the data inside (comments) the Notes field as well in the Report ?
We found that the only way is to open the Notes and print it, but it takes time, any idea ?
Rgds.
MCM.

There's nothing built-in that does that. If you only have text fields and they don't have any formatting or other property that would prevent it (e.g., Date, character limit), you can run a simple script to populate each field with the field name, and then print. A more complicated approach would be a script that adds text annotations near/over each field that shows the field name. This would just be for documentation purposes, but it's possible. Post again if you'd like help with the first. You'll probably have to pay someone for the second approach if you don't want to do it yourself.

Is there any way to include excluding one field

hi all,
is there any way to include a structure or type in another structure or type by excluding one field?
regards
hyma

I think you are trying to include 2 structures but it is giving error that some fields are common
you can overcome that like this , these are the 2 additions
INCLUDE STRUCTURE ZTAB AS name1.
INCLUDE STRUCTURE ZTAB AS name1 RENAMING WITH SUFFIX name2
for more info check the help for INCLUDE STRUCTURE

If I backed up with a newer version of iOS than the phone I am trying to backup to.. Is there any way to bypass the setup assistant in order to download the new iOS on the new phone then go back and restore from my old phone?

if I backed up with a newer version of iOS than the phone I am trying to backup to.. Is there any way to bypass the setup assistant in order to download the new iOS on the new phone then go back and restore from my old phone?

Try deleting your last backup by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, swipe across your backup and tap Delete, then go back and turn iCloud Backup back on again. If it still won't back up, you may have an app that is preventing the backup from succeeding. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.

Are there any way to recover the deleted images form iPhone 4

hello guy's
are there any way to recover the deleted images form iPhone 4
note : i haven't make any copy of the photo in my pc so i relay need for them
plz help

The Camera Roll is for temporary storage as with any other digital camera. Although photos in the Camera Roll are included with your iPhone's backup which is updated by iTunes as the first step during the iTunes sync process, photos in the Camera Roll can and should be imported by your computer ASAP. If you didn't sync your iPhone with iTunes since these photos were captured by your iPhone and the photos in the Camera Roll weren't imported by your computer, the photos are gone.
Depending on how wealthy you are, you can contact a data recovery service to see if they can recover deleted photos from an iPhone's flash drive, but you will pay an arm and a leg for this. Such a data recovery service is not cheap and with no guarantee the data will be recoverable.

*Is there any way to limit the Chart Bar size dynamically?*

Hi
I have selected the Marker size as Medium for my Bar chart.
Bar chart bar showing too big when there is only one bar.
Is there any way to limit the bar size dynamically?
Thank you

hi Ruwan,
Don is correct in that there is no option in the chart design component to do this.
what you can do though (i know it is a pain) is to
1) create a new chart in a new section with a narrower bar using the chart options dialogue
2) create a conditional suppression formula for the new section and the old chart section based on the value returned in the Show Value for the chart
i have created a request for a charting overhaul [here |https://ideas.sap.com/community/products_and_solutions/crystalreports;jsessionid=B3E2E9F6A6CC9C9F5321659382A91855.node0]in the ideas place which includes a solution for this particular issue. please feel free to give it the thumbs up if you think that this is a worthwhile idea.
jamie

HT1386 After syncing my iphone I found that all of my notes were erased from the phone. Is there any way to retrieve the notes now that they have been erased?

After syncing my iphone I found that all of my notes were erased from the phone. Is there any way to retrieve the notes now that they have been erased? I had some very important notes that I have to be able to find. Anyone know how?

I think those contacts still in iphone database. So you can back up you iphone with itunes to get iphone database off your iphone. Then access the SQLite batabse.
http://support.apple.com/kb/HT1766
All data included with the backup is stored in a SQLite database format with the data within various folders not easily accessible.There are some 3rd party utilities that provide for extracting select data from an iPhone's backup and iphone database such as this one.
http://www.datarecoveryforiphone.com/

Is there any way to prevent the OS from querying the Superdrive when start

Just a random question. Whenever my MacBook Pro starts up (either from sleep or a complete/fresh start, the OS queries the drive slot to see if there is a disc present. While this may be normal behavior, it seems to slow down the start up process. (I rarely ever have a disc in the drive). Just curious if this, in fact, normal, or if there's something awry.

Is there any way to prevent the OS from querying the Superdrive when start
No
he OS queries the drive slot to see if there is a disc present.
How can you tell? Based on the noise it makes?

Is there any way to retreive the FileName in the mapping

Is there any way to retreive the FileName and so that I can use that in my mapping. This is FILE2RFC scenario with NO BPM.
I am using the adapter specific message attributes in the file sender CC.
Thanks,
Ravi
null

Yes you can retreive it. Create an simple user defined function in the mapping and use the following code.
Imports: com.sap.aii.mapping.api.*;
Parameter: String filename
Paramter: String filename;
filename = fileName + ".DAT";
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
conf.put(key, filename);
return filename;
Or
Just do whatever mentioned in this weblog:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
---Satish

Is there any way to Mask the Name when a select statement is issued?

Dear all,
Is there any way to mask the name .. i mean if User issue a select statement in a customer table the real name should come like ' ABCXXXDEFXXCFXX'... Which is not the actual name?
e.g if Name: CHIEV SONG MEE
If user issue a statment select * from customers;
The Result Should come something Like this:
Name
CHXXV SXNG MXX
Thank You

user3029023 wrote:
but it seems there is no option in oracle it self which can be used as there they are saying to get a data masking software which we can't due to some internal issues....I would not say that. How one implements masking depends entirely on the requirements that need to be met.
For example, schema A owns all the tables. Schema B can be created as a "trusted" schema - in other words, schema A trusts schema B and allows it full access (with grants) to its tables. Schema B implements data masking as views. For each table in A, a view exists in B that implements the required masking. B can now grant select access on these views to user C. User C will see the same data object names in B as it would have if it used A - only, by using the B data objects it uses masked data objects and not the original source data objects.
Another example - schema Dev is to have all the data objects of schema Prod, but masked where needed. One can use CTAS (Create Table As Select) to create the required tables in Dev with masked values where relevant. This Dev schema can be "refreshed" on weekends by dropping all tables and getting a new fresh copy of production data and masking it - ready for the next week's development cycle.
If the application use is for example APEX, then instead of coding SQL directly as reporting regions to display, a function is used instead. APEX supports reporting regions where it calls a function and this function provides the APEX run-time with the SQL to execute and contents to render. It is easy to use this approach to implement logic in functions that masked column data depending on who the APEX user is, the security/role attributes of the user, and so on.
No there is not a single "+mask this column!+" feature in Oracle.. but that does not mean that such a feature is not supported and cannot be implemented. Oracle has a very comprehensive and rich set of tools - more so than most (if not all) other RDBMS products.
It is up to the architect/designer/developer to use this toolkit in creating a system that meets the specific requirements at hand.

Is there any way to include the BizTalk Application Description after exporting the MSI?

Similar Messages

Maybe you are looking for