Is there any way to prioritize the Messages in ALSB?

Hi all,
Is there any way to prioritize the messages based on some property of the message in ALSB. For example the messages from a specific sender is to have higher priorty.

You can configure thread pools on your different proxy/business service (dispatch policy). Therefore prioritizing client requests based on the service invoked.
In ALSB 3.0 you will also be able to control service throughput, for example you don't want to overload your back-end system with requests from ALSB.
Gregory Haardt
ALSB Prg. Manager
[email protected]

Similar Messages

Is there any way to change the default font for outgoing text-messages, in "Messages"? (OSX 10.10)

Is there any way to change the default font for outgoing text-messages, in "Messages"?
I can change it for one conversation, but then it resets to the default, tiny font.
The preferences menu only lets me change the conversation font.
(OSX 10.10)

Hi,
As you may remember there used to be a Messages pane to the Preferences where the Font and colour of the Balloons or background and the Font text colour could be changed.
And there was a Format Menu for character, word and Sentence changes in the current IM or iMessage.
Those have gone in Yosemite's version of Messages (Despite it retaining the designation of Messages 8 the same as Mavericks' version).
All that can be done now is set the size of the font and this has been moved to the General Section of the Preferences.
The Yosemite version has also been fixed to using the Balloons style of send and receiving any type of messages as well.
Changing the Font would involved editing the Balloon.transcript file.
10:34 pm Saturday; December 13, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Is there any way to actually delete messages from my iPhone? I have already synced my iPhone, updated it, and deleted all of my backups but the messages I have "deleted" still appear in the spotlight search.

Is there any way to actually delete messages from my iPhone? I have already synced my iPhone, updated it, and deleted all of my backups but the messages I have "deleted" still appear in the spotlight search.

If you already have an iPhone backup or an iCloud backup, just follow the instructions on the page below
http://www.whatsapp.com/faq/en/iphone/20888066
If you didn't back up your iPhone, try to use WhatsApp Pocket to recover your chats:
http://www.fireebok.com/whatsapp-pocket.html

Ok so I cant open my Itunes due to Windows Error 2 and the message says to uninstall and re-install Itunes but I'm pretty sure that would wipe the library right? Is there any way to fix the problem and keep my library?

Ok so I cant open my Itunes due to Windows Error 2 and the message says to uninstall and re-install Itunes but I'm pretty sure that would wipe the library right? Is there any way to fix the problem and keep my library?

Hi neffn!
I have an article for you that can help you go through that process of uninstalling and reinstalling iTunes. If you have Windows 7, you will want to see this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
and if you are using Windows XP, you will want to reference this article:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/ht1925
Note that, as it says in those articles:
iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes. While it is highly unlikely that you will lose any contents of your iTunes Library when following these steps, it is always a good idea to ensure that your iTunes library is backed up. If you're unsure how to backup, see iTunes: Back up your iTunes library by copying to an external hard drive.
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Is there any way to click the System Message Box button through code?

Hi,
Is there any way to click the System Message Box button through code?
Is there any way to restrict the System Message Box ?
The requirement is, i need to open the MRP Wizard form in MRP.it s run automatically.after completion of the wizard is there finish button.after clicking of the finish button, there have a system message. i want to click on "Yes" button through coding.
when system message box open.my code is stopped.if i press yes code is running.
Thanks in advance.

Thanks for replay
bellow given the code
i am using, when i call the finishMrp function its going to take the itemId from XML and click to the finish button.
There have a system message .when system message fair my debugging stopped. Please give me any idea.
Public Function Execuate() As Boolean
Dim strSQL As String
Dim objRS As SAPbobsCOM.Recordset
    Dim intLoop As Integer
    Dim objForm As SAPbouiCOM.Form
    objForm = objAddOnCentral.objApplication.Forms.ActiveForm
    objRS = objAddOnCentral.objCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
    strSQL = "SELECT U_MRPCode From [@ACSYMRPLIST]"
    objRS.DoQuery(strSQL)
    If objRS.EoF Then
    Throw New Exception("No MRP Scenario Scheudled")
    Return False
    End If
For intLoop = 1 To objRS.RecordCount
            objForm.Freeze(True)
            If intLoop = 1 Then
            initializeMRPRun()
            System.Windows.Forms.Application.DoEvents()
            Else
            reinitialize()
            System.Windows.Forms.Application.DoEvents()
            End If
            MRPRun(objRS.Fields.Item("U_MRPCode").Value)
            System.Windows.Forms.Application.DoEvents()
            objForm.Freeze(False)
            objRS.MoveNext()
        Nex
        finishMRPRun()
        Return True
    End Function
   Private Sub finishMRPRun()
        Dim strResource As String
        Dim objXML As New XmlDocument
        Dim objXMLNode As XmlNode
        Dim objXMLNodeList As XmlNodeList
        strResource = System.Reflection.Assembly.GetExecutingAssembly().GetName().Name & "." & "AutoStart.xml"
        objXML.Load(System.Reflection.Assembly.GetExecutingAssembly.GetManifestResourceStream(strResource))
        objXMLNodeList = objXML.SelectNodes("/AutoMRPScript/FinishMRP/Instruction")
        For Each objXMLNode In objXMLNodeList 'objXML.ChildNodes.Item(1).ChildNodes
            Select Case objXMLNode.Attributes("OPType").Value
                Case "2"
                    systemMessageactiveFormButton(objXMLNode)
            End Select
        Next
    End Sub
Private Sub systemMessageactiveFormButton(ByVal Instruction As XmlNode)
        Dim objForm As SAPbouiCOM.Form
        objForm = objAddOnCentral.objApplication.Forms.ActiveForm
        objForm.Items.Item(Instruction.Attributes("ItemID").Value).Click()
    End Sub
Edited by: Badulla Sk on Dec 31, 2009 11:24 AM
Edited by: Badulla Sk on Dec 31, 2009 11:25 AM

Is there any way to retreive the FileName in the mapping

Is there any way to retreive the FileName and so that I can use that in my mapping. This is FILE2RFC scenario with NO BPM.
I am using the adapter specific message attributes in the file sender CC.
Thanks,
Ravi
null

Yes you can retreive it. Create an simple user defined function in the mapping and use the following code.
Imports: com.sap.aii.mapping.api.*;
Parameter: String filename
Paramter: String filename;
filename = fileName + ".DAT";
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
conf.put(key, filename);
return filename;
Or
Just do whatever mentioned in this weblog:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
---Satish

Is there any way to identify the particular socket connection is closed ?

Is there any way to identify the particular socket connection is closed or not ?
Any methods ???
How can the program knows the connection is lost or some thing ...
Is the socket throws some excpetions when there is no active connection ???
namanc

If you get an IOException when you try to use the socket, the connection was obviously closed.
The correct way for an application to know if the socket was closed is:
1) the server sends a message indicating that the socket should be closed
2) the client closes the socket itself

Is there any way to specify the default version of LabVIEW?

I have a sinking feeling that the answer to this question is "no." With more than one version installed, is there any way to set the default LabVIEW version for opening a VI? I have both 7.1 and 8 installed, and usually only use 8 to open an example or look at something posted here. When I do that, it resets all the OS hooks so that the default action for opening a VI is to open it in version 8. I've even gone so far as to create actions to open files in 7.1 and 8, but it always resets my default action.
I found this KB article for when version 7 came out, but it's suggestions don't seem to work with 7 and 8.
Ugh. I hate it when software thinks it knows what I want better than I do.

eaolson wrote:
I have a sinking
feeling that the answer to this question is "no." With more than
one version installed, is there any way to set the default LabVIEW
version for opening a VI? I have both 7.1 and 8 installed, and usually
only use 8 to open an example or look at something posted here.
When I do that, it resets all the OS hooks so that the default action
for opening a VI is to open it in version 8. I've even gone so
far as to create actions to open files in 7.1 and 8, but it always
resets my default action.
I found this KB article for when version 7 came out, but it's suggestions don't seem to work with 7 and 8.
Ugh. I hate it when software thinks it knows what I want better than I do.
Add
in the LabVIEW.ini file of those versions you do not want to rewrite
the registry on startup to point to themselves for VI files, the
following:
RegisterExtensions=False
Of course the VersionChooser utility mentioned earlier is even more convinient.
Rolf Kalbermatter
Message Edited by rolfk on 06-28-2006 08:21 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Is there any way to set the default for *.doc document so that Pages opens them automatically?

I have a number of Ms Word documents because I used to have Word for Mac before the last OS release. Now, of course, when I double-click on them, I get a message saying that PowerPC isn't supported.
Now Pages will open these files. Is there any way to change the default for *.doc files so that a double-click will open them in Pages?
(Instead of me going to the trouble of finding out where they are actually located on the hard drive so that I can open pages and say - here, open this file--even though you didn't create it--)

Click on a .doc file and type Cmnd I to open Get Info. In the Open with: menu select Pages, then click on Change All…
Walt

Is there any way to make the sent folder in mail list emails "to" instead of "from"

Is there any way to make the sent folder in mail list emails in the "to" order instead of "from".

Sure open Sent folder.
Just above first message is an icon titled Sort By Date followed by a downward pointing arrow.
Click on the arrow and select "To" from the list.
Allan

I just bought an new ipad mini with wifi and cellular. Is there any way to send text messages to people and contacts that do not have iphones such as friends with blackberrys or a samsung galaxy smartphone.

I just bought an new ipad mini with wifi and cellular. Is there any way to send text messages to people and contacts that do not have iphones such as friends with blackberrys or a samsung galaxy smartphone from this ipad. Everytime I try to send a message to a person that does not have an Apple product ( Iphone or Ipad ) it comes up saying contact is not registered for iMessage and wont send it. I can only send them a message from my iPhone 4 instead. Do I have to install a new App from the App store to send these non iMessage cell users a message?

FYI
Complete guide to using iOS 6
http://howto.cnet.com/ios-6-complete-guide/
Guide to Built-In Apps on iOS
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
http://www.youtube.com/watch?v=YT2bD0-OqBM
http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

Is there a way to view the messages I sent along with files in Adobe Send?

Is there a way to view the messages I sent along with files in Adobe Send?

Too bad...I wish that feature was still there that was in SendNow...I also have to go and get the recipients email each time I send a file instead of Send remembering the email addresses I have sent to in the past.
Are any of the great features of SendNow going to be brought over into Send? Or are they just gone...I am a paying CC user...just curious what's going on at Adobe...Thanks for your very quick response though...I guess my message content is gone.

Is there any way to get the files from other computer ?

Hai all,
I have 2 computers connected. I know the IP address of other computer. Is there any way to get the files from other computer. (for e.g. I want to get the files from specific folder. In Java netwroking is it possible? (Any programs)
regards,
Namanc

Bro Take it easy.
Think you need to send a Image file named ("abc.gif")
now develop a server using ServerSocket and connect it in local IP and any PORT
For example i think ur server is connected in "localhost" and 9000 port.
Now make ur server educated using some commands.
For example:
FileName: <File Name String>
[Means new file is sending by connected client]
FileSize: <File size long or int value>
[ So that ur server can determind about the total length of sender file]
DataModeOpen
[Now your client will send its image data, this command means your client software is sending data]
fjadlkfjaofaijojfwoeiurfodkjflsajlfksa
l23j4lj23lkjlasjfoq23j4rokjelfkjasldkf
2o3j4lk2j3ljslakdjf2l3j4 l23kjlk23k4j
DataModeClose
[Means file sending finished]
Close
[Means your client connection is closed]
Now develop a client supporting this command.
For example(Server):
String getFileName=null;
long getFileSize=0;
public handleCommand(String getCmd) {
    if(getCmd.startsWith("FileName")) {
            String[] splitData=getCmd.split(":");
            this.getFileName=   splitData[1];
            outPutStream.writeBytes("+OK");
    } else if(getCmd.startsWith("FileSize")) {
            String[] splitData=getCmd.split(":");
            this.getFileSize=Long.parseLong(splitData[1]);
            outPutStream.writeBytes("+OK");
    } else if(getCmd.startsWith("DataModeOpen")) {
           //data mode open so receive data
          receiveData();
          outPutStream.writeBytes("+OK");
    } else if(getCmd.startsWith("DataModeClose")) {
          //close client socket
         getClientSocket.close();
}For client:
DataInputStream dataIn=null;
BufferedOutputStream bout=null;
public sendFile(bytes[] getBytes) {
        //if ok found then do other or show error message
    if(sendCmd("FileName:"+getFileName)) {
        if(sendCmd("FileSize:"+getFileSize)) {
            if(sendCmd("DataModeOpen")) {
               bout.write(getBytes);
            } else {
               showError(3);
        } else {
               showError(2);
   } else {
        showError(1);
}i think it will help u

Is there any way to print text messages from an iPhone 3gs?

Is there any way to print text messages from an iPhone 3GS?

The only ways to print any text messages from any of the iOS devices is to either do a print screen and then print those photos, or you could look for a program called TouchCopy that will allow you to download the SMS to the computer and you can handle them from there.

Is there any way to block the shutdown of the device is protected by password? This function would help in case of theft with the issue of the find my iphone app.

is there any way to block the shutdown of the device is protected by password? This function would help in case of theft with the issue of the find my iphone app.

Device experiences issues, locks up.
I need to do a reset.
How would I do that with a pass code lock in place?
Wait until the battery dies?
Apple's changes in iOS 7 are smarter.
"Losing your iOS device feels lousy. Thankfully, Find My iPhone can help you get it back. But if it looks like that’s not going to happen, new security features in iOS 7 make it harder for anyone who’s not you to use or sell your device. Now turning off Find My iPhone or erasing your device requires your Apple ID and password. Find My iPhone can also continue to display a custom message, even after your device is erased. And your Apple ID and password are required before anyone can reactivate it. Which means your device is still your device. No matter where it is."
http://www.apple.com/ios/whats-new/

Is there any way to prioritize the Messages in ALSB?

Similar Messages

Maybe you are looking for