Is there anyone faced the Viber crash issue

Hi am facing a viber crash issue when i took the recent update from the app store, So i would like to ask anyone to suggest me the solution to get this issue fixed. To get back on track for using the Viber on my phone

Have you tried deleting the app then installing it again? Perhaps you had a bad install.

Similar Messages

  • I could not pair my bluetooth device with my ipad mini retina display. Is there anyone facing the same problem?

    I could not pair my bluetooth device with my ipad mini retina display.
    My ipad could not detect the bluetooth device. I do not facing this problem with my iphone and my older ipad on the same bluetooth device.Is there anyone facing the same problem?

    Yes I tried pairing with my bluetooth car hands-free set - Not discoverable.
    I tried to pair with my bluetooth headset - Also not discoverable.
    I have no problem with my other apple products my older ipad2 and my current iphone5.
    Just this ipad mini retina display could not discover the above bluetooth device.
    Any idea on how to solve this? Thnaks.

  • Has anyone solved the Safari Crashing Issue on iPad Air

    I am using an iPad Air with iOS 7.0.4 and Safari continues to crash while I am scrolling. I have tried the suggested fix: clear history/cookies/data and then reset the iPad, but that did not fix the problem. I can consistently recreate the crash by doing the following:
    Clear the Safari history/cookies/data (Settings --> Safari)
    Reset the iPad (Hold down the Sleep/Wake button and the Home button for 10 seconds)
    Open Safari
    Open the url https://twitter.com/TimCookAppleCEO
    Scroll to the bottom of the page and tap the "Tap to load more tweets" button.
    Repeat Step # 5 three times
    Attempt to scroll to the top of the page by performing a finger swipe up
    Safari crashes (closes abruptly)
    The contents of the LowMemory-2013-12-29-044906.plist log is below.
    Incident Identifier: C953DDD9-3280-48FE-A04D-EE8CF3402A81
    CrashReporter Key:   151a11a3cca69f96ff71911d75dbe505afbf006f
    Hardware Model:      iPad4,2
    OS Version:          iPhone OS 7.0.4 (11B554a)
    Kernel Version:      Darwin Kernel Version 14.0.0: Fri Sep 27 23:08:32 PDT 2013; root:xnu-2423.3.12~1/RELEASE_ARM64_S5L8960X
    Date:                2013-12-29 04:49:06 -0800
    Time since snapshot: 68 ms
    Free pages:                              5607
    Active pages:                            84627
    Inactive pages:                          38823
    Speculative pages:                       3277
    Throttled pages:                         0
    Purgeable pages:                         0
    Wired pages:                             110099
    File-backed pages:                       19138
    Anonymous pages:                         107589
    Compressions:                            49088
    Decompressions:                          9431
    Compressor Size:                         10632
    Uncompressed Pages in Compressor:        25808
    Largest process:   MobileSafari
    Processes
         Name                    <UUID>                       rpages       recent_max   fds      [reason]          (state)
          MobileMail <387c38c23acc32dc912a5088ef6b2b66>         5589             5589  200                      (resume) (continuous)
                tccd <a4190e0e6f6b3d23b06326c8935a5bb4>          185              185  200                      (daemon)
                 kbd <4350c1efc23b3182809fcb6d8a7885fd>         1628             1628  200                      (daemon)
          librariand <f9e63967978833b585958d2d38f51e16>          573              573  200                      (daemon)
        MobileSafari <e7a0a9831f8c3339a9425f56f51e5005>       179923           179923  200  [per-process-limit] (frontmost) (resume)
    identityservices <cd1fff47d6ad3b0f85cdc5fb39d8b53e>          493              493  100                      (daemon)
             imagent <5080234127f5363fb539ffc3965af6e2>          377              377   50                      (daemon)
             syslogd <5c3a246617d3399e977efc84c2e29df2>          213              213   50                      (daemon)
               wifid <ca4f06468bf03d0f8847089e8cd320f1>          555              555   50                      (daemon)
              powerd <a1fc82c399dc36e2b18a6fbb3d936a88>          143              143  100                      (daemon)
           locationd <10f268a18d5d3343ab21be48bb005ecf>         1344             1344  100                      (daemon)
          assistantd <5abc7ba2f2073bc98f6e8902bd736604>          903              903  100                      (daemon)
       iaptransportd <4c622f6c4295395997e7a6ec783b4623>          243              243  100                      (daemon)
        mediaserverd <f067d4c2a21a30fbabab30d9c94ccbd3>         1093             1093   50                      (daemon)
       mDNSResponder <2b8ad561938f3fc0a6255b607f503040>          247              247  100                      (daemon)
                apsd <ceb7855af3a63c2682fab13d5e0aeb82>          679              679  100                      (daemon)
         dataaccessd <b155854105f531248c2a44fd3733d59e>         1383             1383  200                      (daemon)
            sharingd <550630f3f5dc3f0aa08ba04876d82e6d>          585              585   50                      (daemon)
              voiced <baad1d590ec8344385d046dacfa431da>          270              270  200                      (daemon)
    assistant_servic <33c881cc5b193213a31c53f4241a7047>          703              703  200                      (daemon)
          calaccessd <d6960604dc2c37499cd597b510055d7e>          291              291  200                      (daemon)
         SpringBoard <fe632b47e4ee342baf4b3701cd11b242>        11104            11104   50                    
          backboardd <2f84882cf3693dfb921f4e0d38966f50>       168214           168214   50                      (daemon)
           fseventsd <a0223d346d4431a5ba1caabf8505b40e>          201              201   50                      (daemon)
           lockdownd <e280cf66209e3be980809a7d93eea76e>          275              275   50                      (daemon)
             configd <bb6e02e801a93ef896f2f3cf5cbb00fe>          650              650   50                      (daemon)
                misd <d983cdd14f853ad7b2c9c0efe36f7d1e>          157              157  100                      (daemon)
        fairplayd.A2 <f788338420e63532960518b7b1333967>          169              169  100                      (daemon)
          aggregated <6189b3e3d0c83a879b99cf7cd566dffb>          584              584  100                      (daemon)
            BTServer <3669aefbfb2e3577b17bde9598feda76>          440              440  100                      (daemon)
           distnoted <c40569cbea09312b9310bc74cbc88e29>          144              144  100                      (daemon)
    WirelessCoexMana <42ae08351ef433ac9b002fb898440b62>          149              149  100                      (daemon)
      UserEventAgent <0d33b64c0c003a65b9a87c6622921781>          649              649   50                      (daemon)
            networkd <c7aa87e0c2d33d379a09598281a5e3ee>          534              534  100                      (daemon)
              cplogd <96828e7047bf36e2a1cdffcc1be700f8>          154              154  200                      (daemon)
    filecoordination <72a4cec360d435c09cb83d2316317288>          197              197  200                      (daemon)
         touchsetupd <0c315f01ae8d3675ad1a4eda4c9b18bb>          206              206  200                      (daemon)
                 ubd <231dc91e9b11307eb98874f9bbfaa86c>          622              622  100                      (daemon)
      CFNetworkAgent <b3f94f89c0be3328a59f4e25598a92b4>          199              199  200                      (daemon)
       wirelessproxd <9f112d11a5f734019013a43e9fc677a9>           67               67  200                      (daemon)
          CommCenter <ba4a2aecbe913f0ca31c8902e444db0d>         1071             1071  100                      (daemon)
             notifyd <bd919e93d6293562af0b7ec0e21247a0>          231              231  100                      (daemon)
    **End**

    Mine is crashing consistently, whereas my iPad 3 hardly ever did. Mine consistently crashes within 30 seconds when I open this:
    http://www.booksamillion.com/storefinder
    This *****. I spent a lot of money to upgrade from a heavier pad that works to a lighter pad that doesn't.

  • I have updated my iphone 4s with ios6 and now im not able to connect to itunes store. I can open the apps store but cannot install any app?  Anyone facing the same issue..

    I have updated my iphone 4s with ios6 and now im not able to connect to itunes store. I can open the apps store but cannot install any app?  Anyone facing the same issue..

    I have a 4S and upgraded to iOS 6 last week without any issues.
    Have you tried resetting your phone (hold the power and home buttons down together until the silver apple appears)?

  • Is anyone facing the similar problem of visible lag while opening app with 3G data on? It seems apple has made 5s slow to improve iphone 4 performance.5s was very smooth on 7.0.6 even with 3G data on. Is this a bug? Is apple going to fix this soon?

    Is anyone facing the similar problem of visible lag while opening app with 3G data on? It seems apple has made 5s slow to improve iphone 4 performance.5s was very smooth on 7.0.6 even with 3G data on. Is this a bug? Is apple going to fix this soon?

    I have same Problem. I tried all options - Reset All Settings, Erase Content & reset all settings, Upgrated to IOS8.1, Restore using iTune. But problem persists.
    When I turn Cellular Data or Wifi ON, then there is a lag while opening the Apps. But If I turn Data/Wifi off, phone becomes super fast. I have checked with my friends. They are not facing this issue. Not sure if Apple know this.

  • Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.

                      Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.

    Take each of the following steps that you haven't already tried.
    1. If you've recently plugged anything into the audio-out (headphone) port, plug and unplug it a couple of times.
    2. From the menu bar, select
     ▹ System Preferences ▹ Sound ▹ Output
    Check the settings. The internal speakers should be selected as the output device, the Mute box should not be checked, and the volume slider should be at least halfway to the right.
    3. Look inside the headphone port. If a red light is coming from the port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a headphone mini-stereo jack of the proper size.Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    4. Boot in safe mode by holding down the shift key at the startup chime. It will take much longer than usual. You don't have to log in; just reboot as usual (without holding any keys) when the login screen appears. (Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.)
    5. Reset the NVRAM.
    6. Reset the SMC.
    7. Reinstall OS X after backing up all data as a precaution. You won't need your backup unless something goes wrong.
    8. Make a "Genius" appointment at an Apple Store.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the recovery partition, if present.
    *An SSD doesn't need to be zeroed.

  • Are all New  iPad facing the same overheat issue? My new iPad also feels warm at the back.

    Are all New iPad facing the same overheat issue?
    My new iPad (wifi 64G) also feels warm at the back.

    It varies. The difference between 'warm' and 'hot'. As in warmer but I can touch it vs too hot to comfortably handle.
    ANd it doesn't seem to be all new iPads. There does seem to be increased heat because of the different battery and the retina display as explained above. There also seems to be some of them - maybe a few from a singular batch/factory that seem to put out what has been termed excessive heat. I would think if it were a universal issue then there'd be something more aggressive being done.
    You can always take it into your local apple store and have them look at it and document that you have a concern, but they may say it's just normal heat associated with the prettier display and new battery configuration.

  • Always facing the "Not Responding" issue while launching the internet explorer 11. I have tried reset in advanced, deleting all cookies, history and all. But no result.

    Always facing the "Not Responding" issue while launching the internet explorer 11. I have tried reset in advanced, deleting all cookies, history and all. Also I did change the default site to https://www.google.com. But no result.
    Some times after some time, able click on new tab and did open any urls. But it is rare. Please help me on this issue. Because of this unable to work with QTP/UFT tool.
    I am getting on top of the screen the below error -
    Error on top the ie screen :
    res:/ieframe.dll/acr_error.htm#google.com,https://www.google.com/ - Internet Explorer (Not Responding)
    I am getting at the bottom of the screen the below error -
    Error at the bottom of the ie screen :
    A problem with this webpage caused Internet Explorer to close and reopen the tab.

    Hi,
    Please refer to the following link to troubleshoot this issue:
    http://msdn.microsoft.com/en-us/library/dn338138.aspx
    Check the browser add-ons
    Check the browser rendering mode
    Then, please also make sure to install latest Windows Updates which might address this issue.
    Update your anti-virus program and perform a security scan incase some virus cause this issue.
    Yolanda Zhu
    TechNet Community Support

  • Is there anyone in the UK Customer Support I can s...

    I have just got off the chat line and then phone call from India and I am perplexed and frustrated to the point where I want to leave BT after many years as a loyal customer.
    My dilemma is this:- About six months ago I (stupidly) upgraded to Infinity based on an offer letter from BT/MD at no extra cost. Immediately before this I used BT Total BB including Line Rental and Anytime calls at a discounted rate of £29 pm and very rarely went into debit.  Soon after changing over my monthly plan started to rise and in addition to this I had to pay a one-off payment of £55 to clear a debit to which, to this day, I cannot understand and get an answer to from BT. My DD is now £41.50 pm for Infinity1, Line Rental and Anytime calls and I have been reminded that my payments will need to increase to avoid sliding further into debit.  My last bill, after all charges and payments showed I was £29.12 in debit.
    After speaking to the BT person in India he said my account was £53.88 in CREDIT, which it is after my payments, less the previous debit, but does not include charges to be added.  He could not understand this and even offered to REDUCE my monthly payments to £33.50 pm. I declined his offer outright and asked him to retain my current payments. I knew I was on to a loser and closed the conversation as I was getting very annoyed with this peron in particular and BT in general.  My current account consists of Infinity1 at a discounted price of £17pm, Line Rental £15.45pm and Anytime calls at £5.15pm totalling £37.60 and I am paying £41.50pm.  We are a low user of the phone and hardly make any chargeable calls which is all the more puzzling.
    So, in closing, is there anyone from BT in the UK that can help me through this problem and explain to me in plain english on why, since changing to Infinity, my account is nearly alway's in Debit.
    Thank You Community in advance for your help and understanding in this matter.
    PS: Is there any way I can revert back to BT Total Broadband or is it only one way traffic.
    Thanks agai.
    IanSally
    Solved!
    Go to Solution.

    Hi Iansally,
    I can take at the billing of your account. Please can you send me in your details using the link found in the "About Me" section of my profile?
    Thanks
    PaddyB
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Has anyone solved the "garbled characters" issue i...

    When I use Nokia Maps on my N95, all streets and towns which contain special characters such as: é, è, ü, ä, ö, etc… do appear garbled. For example,
    Zürich appears as: Zã¼rich
    München appears as: Mã¼nchen
    Liège appears as: Liã"ge
    I saw a couple posts on this forum where people suggested to format the memory card, some other suggested to reload the firmware (my N95 has 12.0.013) but nothing has helped. I went as far as using someone's PC whose WinXP is installed in French - I thought that maybe the operating system or regional settings could have some influence, but I was wrong.
    Has anyone solved this extremely annoying issue?
    Thx

    I solved it. It took me one evening. I wonder why Nokia haven't published any comments on this old issue.
    Solution can be found below, but before I want to tell about some technical details. Maybe guys at Nokia will read them
    As someone on this forum said before the problem is that map names are in UTF-8 format, but phone tries to show them using another encoding. After some googling I found that this issue is well-known because Nokia phones use ISO 8859-1 (which is similar to Windows-1252, Western European) by default but some application assume UTF-8 to be default.
    At first, I discovered that when I start Nokia map with empty SD card and allow it to download something from internet, all names were shown correctly. I supposed that the problem sits in that awful Map Loader, but I was wrong: it does absolutely nothing special with data files, just downloading and unzipping. And this super-mega-feature-rich-map-loader require about 40Mb to download for .NET 3.0 plus 10 Mb for itself. Never seen anything worse
    So I've started to compare contents of one SD card with incorrect street and city names and another with correct.
    After some time I came across Cachedatheader.cdt file in diskcache folder. And what do you think?
    The file from correct SD card contains a literal string: "UTF-8". While incorrect one contains a string saying "ISO 8859-1". I've nearly fell out of my chair after seeing that.
    I've replaced wrong file with correct one and names became readable on all my 180mb of previously downloaded maps.
    Finally, after playing with it some more I found a simple solution which should work for everyone:
    ***** SOLUTION *****
    1. Enable internet access in Nokia Maps application (set it to When Needed).
    2. Access memory card from your PC and go to "\PRIVATE\20001f66\diskcache" folder.
    3. Delete "CachedatHeader.cdt" file. Perhaps you should backup it somewhere before deleting, but it looks like it can be removed safely without affecting existing maps.
    4. Put the card back in the phone if you extracted it and start Nokia Maps.
    5. Allow Nokia Maps to access internet and try downloading some new locations (you don't need to download much, just let it access server) or searching for something.
    6. Now codepage should be correct and all names become readable.
    This effect seems to be permanent and will stay even if you disable internet access later. Also note that you don't have to format card, remove or reinstall any map files. The problem is just in one small file.
    Nokia Maps recreates missing CachedatHeader.cdt, but it will recreate it correctly only if internet access is enabled when it starts. Probably the best way to avoid wrong codepage problem is to enable internet access at first start of Nokia Maps and use Map Loader only after downloading some bits of map directly from the phone.
    Message Edited by ankor85 on 09-Jan-2008 09:02 PM

  • Is anyone still having the AME crash issue?

    I've been working very efficiently until the last day where Media Encoder just stopped finishing the job.  It will get about 50% of the way through a simple .mov to mp4 export and then freeze.  I am using a new Imac with an I7 and 20+ gigs of RAM. I have updated both Premiere Pro cs6 and with that Adobe Media Encoder. 
    I have about 200 edits that I cannot transfer to Final cut Pro with out shooting myself in the face, I am begging for someone to help me out here. Adobe doesn't seem to give a rip and I am at a complete loss. 
    Sammy

    I've been working very efficiently until the last day where Media Encoder just stopped finishing the job.  It will get about 50% of the way through a simple .mov to mp4 export and then freeze.  I am using a new Imac with an I7 and 20+ gigs of RAM. I have updated both Premiere Pro cs6 and with that Adobe Media Encoder.
    I have about 200 edits that I cannot transfer to Final cut Pro with out shooting myself in the face, I am begging for someone to help me out here. Adobe doesn't seem to give a rip and I am at a complete loss.
    What version of Premiere Pro? Premiere Cs6 6.0.2 updated yesterday
    What operating system? Mac OSX 10.7.4 : 3.4 Ghz 20Gigs of RAM : I7
    What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime".  I am using a few different codecs in some of the sequeces.  Mainly used is the Apple ProRes 422, Linear PCM, Timecode : sometimes I used a few AVI files as well
    If you are getting error message(s), what is the full text of the error message(s)? I do not get error messages the Media Encoder just stops working
    What were you doing when the problem occurred? Trying to have exported media converted to h264
    Has this ever worked before? This has worked almost all the time except for this last week as I've really need it.
    What other software are you running? Premiere CS6 and Media Encoder that is all.
    Do you have any third-party effects or codecs installed? No
    Tell us about your computer hardware. Be especially certain to tell us about third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU).
    Are you using Mercury Playback Engine GPU Acceleration? I am using the mercury playback engine yes
    Does the problem only happen with your final output, with previews, or both? This only happens on the final output

  • Solve the JavaFX crashing issue (libjogl.jnilib) on Mac Snow Leopard

    This is what happening to me and how did it get fixed.
    This issue concerns running JavaFX programs on Mac machines with Snow Leopard installed.
    Here is the story.
    I have two Mac machines: one is MacBook and the other is [Mac mini|http://www.apple-history.com/body.php?page=gallery&model=mac_mini_early_09&sort=date&performa=off&order=ASC]. Before I installed Snow Leopard, JavaFX programs were good at both machines. After upgrading to Snow Leopard, every JavaFX program on my MacBook crashed with messages saying that "libjogl.jnilib" causing an bad memory access. But they are still all good on my Mac mini. It's very annoying because if I accidentally went to a page with JavaFX applets on it, Safari got killed.
    I think there might be something wrong in my MacBook so I backup my data and did a clean install of Snow Leopard. Things remain unchanged. It still crashes all the time. Can't figure out why.
    So, I decided to get rid of the cause directly. I tried to search "libjogl.jnilib" on the disk but found that it is downloaded by need (one of the Java Web Start mechanisms), not a pre-existing file in the system. That is why reinstalling the system did not help.
    Then I went to the JOGL sample page, running a few samples through Java Web Start. They are good on my MacBook! So I compared the .jnlp files of the problematic JavaFX programs and JOGL samples. I found that if I put
    <extension name="jogl-all-awt" href="http://download.java.net/media/jogl/jsr-231-2.x-webstart/jogl-all-awt.jnlp" />in the .jnlp files of JavaFX programs, they will get healthy "libjogl.jnilib" and run good. Hooray!
    But I can't intervene in every JavaFX execution this way. So I download the latest JOGL binary, put them (.jar and .jnilib files) under "/System/Library/Java/Extensions/". Everything is fine now.

    kmacdona wrote:
    Do we know who is responsible for patching this for end users? i.e. does Apple need to push this in a system update?
    Thanks,
    KeithI believe if something needs to be done, Mike will do it. He is very active in Apple's Java forum and after all he is the guy in Apple.
    I am still wondering why JavaFX is okay on my Mac mini. Maybe what happened to my MacBook is an extremely corner case because I can hardly find any other one seeing the same problem when I tried to google "crash", "libjogl.jnilib", "javafx", such keywords.

  • Has ANYONE resolved the keyboard backlight issue with the 1.67 15" PB?

    Here is the issue. I got a used PB G4 1.67 G4 off of Craigslist on Thursday night. When I picked it up the owner had done a re-install of the OS and it booted to the intro movie. While standing in the dark parking lot the backlight on the keyboard WAS working. I shut the machine off and got into the car to fill out the registration information and I noticed the backlight was NOT on. I pressed the buttons and nothing. I checked the keyboard and mouse system preference and the ambient lighting on/off was NOT there!
    Does anyone have a solution to this problem or should I just forget about this feature?
    Thank you all for your help.
    Blake

    I thank you for the response. In your case was the control for the lighting missing from the keyboard system prefs? That is what kills me, it worked one minute and not the next and I can't even see the controls for it.
    Thanks again,
    blake

  • Has anyone resolved the slow playback issue?

    I've run across a few older posts related to slow playback of Captivate output, but it doesn't look like the issue has been resolved. I'm experiencing the same problem on a random basis.
    At first I thought it was just in the preview mode, so every time I made a change, I published the project to test it. Then the published files started playing back extremely slowly, but not all the time. For example:
    1. I published the project as a swf file, and it played back fine.
    2. I added one slide with a Fade transition and published again. The playback was absurdly slow this time, and I hadn't changed any settings.
    3. Without changing anything, I published again, but I selected the Windows Executable output option. The playback was fine.
    4. I published again, but I switched back to the swf output - it was fine this time.
    5. Tried the Preview feature again. The mouse movement was extremely slow, but the slide transitions weren't as bad - just choppy.
    I'm using Captivate 5.5 on Windows XP. Any thoughts?

    Does the swf play that way on other computers besides your own?

  • Anyone Solved the N96 Update Issue?

    Wondering if anyone has come up with a solution to the problem of being asked to remove battery, charger and retry etc when using Nokia PC Suite to upgrade the firmware?
    I have a branded T-Mobile N96 and the firmware update is available now to 11.###
    I can't get past the step where it asks me to disconnect the charger and press the power button - very frustrating!
    Anyone solved it?
    Cheers

    I had a lot of trouble updating my N82 using vista. It worked fine using XP. I have successfully updated other phones using vista but I still prefer XP for updates.
    You should consider a reset as a last resort. Back up before you do using ovi suite if you have any pre-installed content that has a licence key. If you have installed any apps to the mass memory it may help to format that before a *#7370# reset.
    Reset to factory defaults (*#7780#) : Restores settings but preserves user data (photos, 3rd party apps etc)
    Reset (*#7370#) : This reformats completely the C: drive. All applications and files stored on this drive will be lost and clean default files will be rewritten.

Maybe you are looking for