Is there anyway to make a PC look like a PLC on a Profibus network?

We currently have a PC based data acquisition system. A customer has asked us to integrate the PC into their PLC (Profibus) network and make it appear as though it (the PC) is a slave on the profibus.
I have found some interfaces that convert profibus to ethernet but haven't found anything, short of the NI Applicon boards (and others), that allow me to go the other way. As I only want to be a relatively stupid slave on the profibus, I was wondering if there isn't a more economical solution.
Any comments, suggestions, directions, etc. would be helpful as I'm starting from scratch and am not sure where to go with this...
Kind Regards,
Eric

Hi, Del Conte
I've looked at: http://www.sea.siemens.com/machine/products/cnc/prod_810d.html#1523 and have seen that this CNC consist of Numerical processor, power units and has integrated PLC S7. And there is possibility to connect this PLC to PC through Profibus. I didn't remeber if inside of Softnet exist OPC Server. You can check it in Simatic NET Configuration Console. Siemens doesn't provide any drivers for LV to their CP5611 card. Comunnication idea relay on using OPC Server. OPC Server establish and continue data exchange between PLC and PC. Labview has OPC Client features by means of DataSocked or DSC module to get/put the data. If you give me your PLC configuration (series numbers of all PLC modules on the rack from left to right ,e.g. - 6ES7315-2AG10-0AB0) I can prepare to you connection configuration PLC - PC. Moreover you have to have STEP7 Programming Software and Simatic NET Software to download PLC configuration into PLC.
Regards. Rumcajs

Similar Messages

  • Is There Anyway To Make A Composistion Without A Set Time?

    Ok, so is there anyway to make a composistion that doesn't have a set time? Oh yeah...and, whenever i look at the time bar at the bottom it's coming up in 1f - 2f -3f - 4f ...So on, is there anyway to change this to like 5s - 10s - 15s   Like it was before? Thank you.
    (CS6)

    You change the length of a composition with the composition settings. There is no automatic way to expand a comp. If you need to add more time then press Ctrl/Cmnd + K or go to Composition>Composition Settings and change the time.
    In the timeline, you can see more or less of the composition by adjusting the area of view using the icons at the bottom left side of the layer view.

  • Is there anyway to make a audio file copy of a song for my computer?

    Is there anyway to make an audio file copy of a song from iTunes for my computer?

    Yes.
    Type "Mp3" or "convert to MP3" or similar into the help feature of itunes.

  • Bought an album off iTunes and two songs from the album will not download. Is there anyway to make them force load or anything along those lines?

    Bought an album off iTunes and two songs from the album will not download. Is there anyway to make them force load or anything along those lines? The Album is Sunshower-EP by UME and the songs are The Conductor and The Means.

    Hey ChandlerAdaway!
    I have an article here that can provide you some guidance for this issue. First, you will want to check for the songs in your past purchases list for your account, if you haven't already:
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/HT2519
    If the songs cannot be found there, you will want to report an issue with your download by following the directions in this article:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Is there anyway to import my file title like img_001 into my file info so it will show up in my meta data.  I have 300 images and I was wonder if I could batch process them...

    Is there anyway to import my file title like img_001 into my file info so it will show up in my metadata?

    you can re-number files as you import
    you may need to a test of a few un-important files
    click the re-name file panel >>tick>>template>>click on arrows>>edit and that will take you the customize panel
    add image name like "img"
    then add numbering I have only used the first one (import)
    make sure you add two "00" so they stay in order
    should look like img-001
    bugga of a number tool imo; bridge is easier/better
    you could also rename in windows or bridge  or other programs before importing BUT ONLY IF THE FILES HAVE NOT BEEN IN LR ALREADY. Sorry to yell thats important as you most likely know
    Yell if that doesn't make sense

  • How to make Firefox not look like Chrome?

    Is there anyway to make Firefox 29 go back to the old layout?
    I chose to use Firefox because I loved the layout of the UI and it didn't look like Chrome. In this new update I may as well just switch because they look almost identical. This is really concerning to me, as I love Firefox and this new UI looks terrible to me.
    Can't we just have updates that improve the code and QoL issues without being forced into using a browser that is a 1:1 clone of Chrome?
    -Smoot

    Man...what happened to you guys Mozilla?

  • Why did Apple make iTunes 7 look like a Windows XP App.?

    Why did Apple make iTunes 7 look like a Windows XP App.? This version of iTunes doesn't even look like it belongs in OSX. It's ugly is about the only way I can put it. I can't figgure out why they removed the EQ icon and didn't even assign a key command for it. Now yoy have to go into the menu to select it. Also I have noticed that it sometimes downloads the wrong artwork for album covers. The old version of iTunes seemed much better and I have reverted back to it untill Apple fixes the problems with version 7 and makes it look like part of the OSX family of applications.

    Well I wouldn't say it was ugly but some changes do leave something to be desired.
    I certainly aggree about the equaliser button and the visualiser button has gone too but at least they assigned a key command for it. The scrollbars need more colour and I'd prefer the buttons at the bottom to stand out a bit more like the ones at the top.
    I see no reason to go back to iT6 though, especially as I would misss Cover Flow. You could have a long wait for a change of interface and in the meantime you miss out on the good parts of iT7. If your track information is correct and identical to that on the Store then it shouldn't get the wrong artwork. Luckily I already had most of my album covers in place from other sources such as Amazon and just used iTunes to get a few more. My only complaint about the Get Album Artwork feature is that it's getting it from the US store when I want it from the UK store.
    Anyway these forums are really here to enable users to help each other solve problems and not to discuss Apple's decisions. If there are things you want changing then do what I and others do and send constructive criticisms and requests via the link below, if you haven't already.
    http://www.apple.com/feedback/itunesapp.html

  • How do I make 29.97fps look like film?

    Sorry for the novice questions, but all of my footage has been shot on a relatively inexpensive camcorder which records at 29.97fps. Is there any easy way to make it look like a 24fps film when I play it back on my NTSC television?
    I am relatively new to FCP but I have started learning compressor and I also heard about a program called 'Nattress?"
    Any help would be appreciated!!!
    -Brian

    There have been endless discussion and tutorials on how to make 29.97 look like film, so I would also check Google. One of the more commonly known plugins that will do this is called Magic Bullet. But be aware, there is only so much that can be done with DV footage shot on a relatively inexpensive camcorder (I'm assuming DV). Most "film effects" plugins will provide you with a nice number of presets that will soften your image, simulate pulldown, add grain, and do some heavy color correction. But they can't invent pixel data that isn't there to begin with.
    What really makes shooting on film so unique and eye catching is that if you can afford to work with it, chances are you can also afford high quality lenses and professional lighting. Things like motion blur, grain, lack of color sampling and a high dynamic range are what give film a unique look. Personally, I think getting a true "film look" for DV is a bit of an impossibility, but people have done some nice stuff with these plugins. Unfortunetly, until the really high end video formats make it into our Handycams, I think we're stuck with simulating the effects, rather than duplicating them.

  • How to make new Firefox look like old Firefox?

    I was looking at the new version of Firefox and really don't like how it looks. If I update to it is there a way to make Firefox look like the old one? 3.6.24 is the version I'm using now, and I really like how it looks.

    To restore the old appearance right click the orange Firefox button to open the toolbar context menu or use (F10) View > Toolbars.
    * Click the Menu Bar entry and place a check-mark to make the Menu Bar visible all the time (Windows and Linux).
    * Click "Tabs on Top" to remove the check mark and place the Tab Bar at its original position just above the browser window.
    See also:
    * https://support.mozilla.com/kb/why-are-tabs-top
    *https://support.mozilla.com/kb/Menu+bar+is+missing
    *https://support.mozilla.com/kb/how-do-i-get-firefox-button
    * http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6/

  • Possible to make a chart look like this?

    I'd like to make a chart look like
    this.
    Is this possible and if yes with which chart type and
    settings, or if no, could someone point me to
    some tutorial or guides how to draw custom shapes and line
    with flex?
    thanks,
    Mickey

    Hi Tony,
    Fisrt it's sure to use datetime, date and time range as a dimension for
    crosstab.
    The default type of ORDERDATE is Date, so you should define a computed
    column in dataset: expression is row["ORDERDATE"] type is Date Time or
    Time. Then using them in your cube.
    If you want display like:
    Jan 1, 00:00 to 11:59 x1
    Jan 1, 12:00 to 23:59 x2
    Jan 2, 00:00 to 11:59 x3
    you should make sure that the ORDERDATE dimension is a Regular group but
    not a Date group. Because the Date group can not set the static level. Do
    you know how to set the regular dimension? In cube builder, when you drag
    ORDERDATE column into Groups, there will be a selection dialog pops up,
    you just chose the regular group is ok. Then you can define your static
    levels to display x1, x2 and x3. There is another way but now we didn't
    open this feature now, the date level will suppport user to define its
    interval(range), but the display is only the number of hour but not 11:59.
    see bug
    #189340(https://bugs.eclipse.org/bugs/show_bug.cgi?id=189340)
    Second, chart can not using the cube's dimension as an axis, chart only
    can use the dataset as its data source, please see comments #3 in
    bug#192853.
    Regards!

  • How to make a crop looks like a camera zoom?

    If I crop a part of a video and want to make the crop looks like a camera zoom... is there a "zoom transition" to put before and after the crop part? Million thanks if someone can solve this technical question...

    Let's zoom in.
    Select the clip and move the playhead to where you want the zoom to start in the timeline.
    Activate the Crop function Shift-C and selec the middle crop function in the top left.
    Press the keyframe button.
    Move the playhead to where you want the zoom to end.
    Crop and reposition the selection as you like in the viewer.
    Click Done.

  • What app do people use to make their pictures look like this

    what app do people use to make their pictures look like this?

    Apparently redchainsaw answered back saying that wasn't it. Though looking at the pictures I see nothing odd or special about them.
    With that said however, there are many image editors in the App store, and the Instagram App does have several filters you can apply to the photos.   So its very possible that is it.

  • How can I make a photo look like it's on a 3D Box Canvas?

    Hi,
    I have been scratching my head trying to figure out a way to make a photo look like it's wrapped around a wooden frame, like on a box canvas. I'm not concerned with the canvas texture, I just want to know how I can apply an effect or an action to a single image to give it depth. Any ideas?
    Ross

    the one i posted was a psd file using a smart object. Double click the smart object it then opens a new file, you add the photo you need, as you from the example that image is wide screen, my photo wasn't, so you use the 2nd file to make the photo fit how you want, then save and it then alters the original file, hence smart object. The background too was one, hence the perspective.
    The splicing etc is ok , as you say if you have an odd one to do.
    So essentially you make up the smart object once and then reuse. As you woudl need to make the canvas / canvas's into several templates for your liking, be it square / portrait / landscape or even spread over several canvases
    The example i showed here is an illusion, but a pretty good one, It NOT 3d. Its done with shadows, this is the smart object.
    as you see its just a perspective rectangle with the top and bottom left cropped off for the depth.
    these are the psd layers as you see there are only 5, its not an action, but googling i did see an action, i think it was $35. But as i said bear in mind the amount of possible boaard canvases you may want.
    2 of the other layers as you see are for the lighting and the top one is the 3d illusion effect, this particular one has the canvas effect too. I can't remember where i got this one from. I think graphic river do 3d canvas though, there will be others.
    Another thing to consider if using an action is if it can do multiple boards. like ...
    again just to show you before the illusion
    Pretty much example like the emboss effect you can use, all done with lighting and darkness.
    http://graphicriver.net/item/more-canvas-mockups/2581097?ref=riverpsd
    http://graphicriver.net/item/canvas-mockups/917210?ref=riverpsd
    there will be other avenues if you google

  • How do I make multiple movies look like one?

    I created a demo of 136 slides with mostly screencaps and one
    small flash animation. The final published flash file is
    approximately 30MB. When the demo is run on multiple computers, the
    CPU utilization rises up to almost 100%, this makes the demo run
    very slowly on most computers. I was advised to cut my captivate
    movie in half ( in slides)... however even then the CPU utilization
    is quite high. How can I break my demo into multiple linked movies
    (to bring down the file size) but still have it play smoothly
    without it stopping to load after each new movie? How do I make
    multiple movies look like one?
    Thank you.

    Would it work to make the navigation of the page go to the
    next movie?

  • How Would I Make A Photo Look Like A Detailed Painting?

    How would I use the "Oil Painting" feature to make a photo look like a detailed painting?

    Digital Painting Tutorials with Photoshop
    http://psd.tutsplus.com/category/tutorials/painting/
    Nancy O.

Maybe you are looking for