Is there away to print with the iPad first generation

Is there away to print with the iPad first generation

I have a Brother HL-2170W and I istalled it to the Router through wireless for use with different computers in the house. I downloaded the free Brother Apps to my Ipad (Vintage) , when I opened the Printer Apps and click find printer it searched and disovered the printer and next open a page from the note and test printed. No third party apps required.
Hope this will answer the query.

Similar Messages

  • HT4972 Is The new IOS6 compatible with the iPad first generation

    Is The new IOS6 compatible with the iPad first generation

    No, not the 1st gen iPads... The new iOS 6 will run on the iPhone 3GS, iPhone 4, iPhone 4S, and iPhone 5; the iPad 2 and third-generation iPad; and the fourth- and fifth-generation iPod touch.

  • I've heard there have been problems with the IPAD 2 and verizon 3 G have these been corrected? I'm about to buy an IPAD and there are more verizon versions available than AT

    I'm about to purchase and IPAD 2 and the net seems full of comments about problems with the IPAD2 3 G and verizon service? Is this still an issue and if so
    how bad? AT&T version is very hard to find, should I get the Verizon or wait?

    You need to remember that these forums are like an emergency room.  All the gazillions of well people don't visit the ER.  Only sick people.
    Same thing for this forum.  Some people had problems activating their iPad 2 with Verizon.  Most didn't and certainly wouldn't post here.
    I would not use this as a consideration in which iPad to buy.  Rather I would consider whether I might be traveling outside the US with the iPad 2.  If you are, then you most certainly need the AT&T (GSM) version if you want to be able to access data without using WiFi.  The Verizon iPad has no SIM card, and the technology it uses is pretty much limited to the USA. 

  • Is the ipad first generation has a wifi ?

    My ipad first generation has no wifi , is these for real ? If not , plss help me to open my WIFI in ipad so that I can download my games to my ipad . my ipad model is MC497LL. thank you , I hope apple communities help me to my problem .

    Wi-Fi button greyed
    http://support.apple.com/kb/ts1559
    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • The co-op have withdrawn the iPad 3 from sale and it will be replaced by a new iPad. Does anyone know if there is an issue with the iPad 3 that would have led to the upgrade? Thanks Mark

    Is there an issue with the latest iPad (3)? Why has it been replaced by an upgrade?

    No, there's absolutely no issue.  I guess the co-op just thought that now that the new iPad is available, and costs the same as the iPad 3 used to cost, it might as well offer the latest.

  • HT204387 Can you pair an iPhone 4S with the ipad 3rd generation

    Does anyone know if you can pair an iPhone 4S with the 3rd generation iPad? Please help

    Only to tether, otherwise you can't. File transfer, by Bluetooth, is not supported on any iPhone.

  • Using earbuds with the iPad (4th generation)

    Does anyone have any problems with the picture (movie, video, etc) locking up when you plug in the earbuds (came with my phone) in your iPad?  I have also found that when you plug it in it doesn't plug in all the way (like on my iPhone), some of the plug is still exposed and also it isn't a tight fight, it is rather loose.  You can plug it in and very easily remove it.  I don't hear a clicking type noise when I plug it in like I do on my iPhone. 

    You are not inserting it in all the way. Push a little harder (on some iPads the plug is a tight fit the first few times you insert it)

  • HT204291 can you use airplay on the iPad first generation?

    I'm trying to use my first generation Ipad to connect to my apple tv, can I use mirroring on ipad 1?

    You can use airplay bur mirroring is only on iPad 2 or 3 as it requires more processing power.

  • I have a friend from Montreal Canada who is in U.S.A. for 2 months. Her old iPad has to be replaced. Is there any compatibility problems with the iPad made for U.S.A. and those one made for Canada?

    I have a friend from Montreal, Canada who is in U.S.A. for 3 months. Her old iPad is not working very well and she thinks about buying a new iPad. Is there any compatibility problem between iPad sold in the States and those one sold in Canada?

    http://www.apple.com/ipad/specs/
    http://www.apple.com/ipad/LTE/

  • I am still having issues with the ipad 4th generation

    The number 528483406 is my case number.  This ipad is still giving me issues worse than before.  I can be in any application and it will all of a sudden leave that app to go to the main screen.  I cannot have this.

    Call apple support....this is a user to user forum

  • HT204023 Can you use the personal hotspot on the iPhone 4 with an iPad 4th generation ?

    Can I use the personal hotspot on the iPhone 4 with the iPad 4th generation which only has wifi ?
    Thank you in advance for your help :)

    Unlimited Internet is different than the carrier supporting the hotspot feature. I don't have an iPhone or an iPad with cellular. My limited knowledge about the hotspot is from reading support articles about it and from what I have read here in the forum.
    I don't know that circumstances with the carriers have changed, but initially, the was an extra cost to enable the hotspot feature on the iDevice. I believe that Verizon was charging an additional $20 per month for the feature. Check out the support article that I posted above.
    This is copied from that article that I posted above.
    Note: If you do not see the option for Personal Hotspot, confirm with your carrier that this feature is supported and your wireless plan is configured for Personal Hotspot. For additional troubleshooting, see this article.

  • HT201263 I have restored my iPad (first generation without retina display) and it finishes restoring software but will not stay on for me to restore the data and then shuts off whenever I try to turn it on. I don't believe that it is charging! HELP!

    Long story about what happened but basically I was using the iPad (first generation without retina display) to watch TV at one point it had 20% battery so I plugged it in then it wasn't charging and I didn't realize so it got to 5% and shut off. I plugged it in to charge it but it just kept shutting down and showing the apple logo, then briefly showing me my home screen before shutting off again. I waited a while to see if it would charge, while it continued to turn off and on by itself. Finally, I unplugged it to see if it had gotten any charge but it just told me to plug it in again. I plugged it into a different charger, same thing. I decided to try connecting it to a computer and it stopped turning on but it did not seem to charge. I tried restoring it as it said in the article. It worked until it got to restoring the iPad from the backup that I had because it immediately shutdown before I could continue. I tried to restore it a second time but still it shut down! I'm so frusturated and I cannot afford to get a new iPad, I need it for school and there is no Apple store for 80 miles nor do I have any insurance or warranty on it! (Obviously considering it's the first iPad to ever come out.) I really don't know what to do! HELP

    Try this Support Article  >  http://support.apple.com/kb/HT1808

  • Is there an all in one printer/scanner that will work stand alone with the ipad?  Thanks

    I'm looking for an all in one scanner/printer that will work stand alone with the ipad,I'm scanning some family photos and no longer use a laptop,thanks for any help.

    Use an AirPrint printer.
    They are listed here (along with instructions for communicating with iPad):
    AirPrint Basics

  • Is there a way to  have the iPad 2 "read" text from iBooks as with web sites or pages?

    is there a way to  have the iPad 2 "read" text from iBooks as with web sites or pages? A different App perhaps?

    Isn't that you asking how to get it (undefined) back?
    If you never had Pages '09, you can buy it from Amazon very cheaply:
    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=432&sid=f68e84cd2ec6 123bd2ed93806c7e7fb6&mforum=iworktipsntrick
    Peter

  • I created one apple I'd when I started using the iPad.  After some days, I had to create a new apple I'd as there was some problem with the first one. Now at some places still my old apple I'd is appearing.  Pls adv how I change this to my new apple Id.

    I created one apple I'd when I started using the iPad.  After some days, I had to create a new apple id
    as there was some problem with the first one. Now at some places still my old apple Id is appearing.  Pls adv how I change this to my new apple Id.

    Anything you downloaded with the first Apple Id will forever be tied to it, and will always require it to update.
    The question here is, why did you think you needed to create a new Apple ID? What was the problem with the first one?
    To get rid of th old one, you'll need to delete everything you downloaded with it, and then sign out of the ID in several places around the iPad. 
    Go to Settings->iTunes & App Stores->Apple ID->Sign out.
    Repeat the process, for Facetime, Messages, Mail and any other App you need to sign out of.

Maybe you are looking for

  • BLOB in DECODE function

    Hi All, I am new to sql. I want to use decode for BLOB datatype. For this i written a query like below. Here user_data is of type BLOB. select DECODE(length(user_data), 0, null, file_data) user_data from user_table; I have tried the other way by usin

  • Need help in displaying a region in  a page

    Hi, I'm looking for the following scenario. Scenario:_ 2 Regions "region_ABC" , "region_XYZ" are dragged and dropped on EM page "PAGE_1". When the "PAGE_1" is displayed first time only the region "region_ABC" will be displayed. When a specific radio

  • Error "getDRMAdditionalHeader failed." of PHDS in AMS5.0.5

    Hi, I am trying to update AMS version from 5.0.3 to 5.0.5. But I could not get manifest file(f4m) of PHDS VoD for "Internal Server Error." Please Help me to PHDS config for AMS 5.0.5. Host OS :  CentOS 5.8 and 6.3 64bit. Reproducibility: install # ta

  • "Roll Back" functionality

    Hi everyone, SAP MDM offers change tracking. Unfortunately I read in this forum, that MDM does not seem to offer a roll-back functionality. In other word, there is no standard function for undoing changes. Is that correct? Would I have to write my ow

  • Windows Seven XP Mode Troubleshooting

    Hello, On R500 (Seven Pro 64 bits Ram 4 Go), I try to use the Windows XP mode.  But the XP virtual machine is unusable because it's very very slow. For example when I launch ONLY the Task Manager, the CPU is between 20 and 100 % used ! With the Comma