Is there some way to set focus on a JTable Cell?

Hi,
I have used JDK6 with a JTable that has some cells not-editabled and others editable.
Then, when the user types TAB key, I would like to change to next editabled cell, jumping out the not-editables. Is there a way to do this?
Thanks

check out this thread:
http://forum.java.sun.com/thread.jspa?forumID=57&threadID=509913
Theoretically you could modify the FocusTraversalPolicy but I've never done that.
Message was edited by:
Jaspre

Similar Messages

Is there some way to set up multiple iTunes accounts?

I do audio/video editing. I have a huge collection of sound effects and a sizable collection of popular music. Here is what i'm looking to do …
When i'm NOT doing my audio/video work, i'd like my iTunes to show only my personal song collection.
When i AM doing audio/video work, i'd like my iTunes to show only my sound effects collection.
Any ideas?
Paul

If the collections are totally different, hold down the option key while starting iTunes and make a brand new library. Hold down option key while starting iTunes to switch between libraries.

HT4059 I'm using ibooks on an ipad mini. I am forever inadvertently advancing to the next or prior page without meaning to do so. Is there some way to require a double tap to advance the page, or to set the sensitivity lower?

I'm using ibooks on an ipad mini. I am forever inadvertently advancing to the next or prior page without meaning to do so. Is there some way to require a double tap to advance the page, or to set the sensitivity lower so that the page doesn't advance every time I move imperceptibly?

I'm using ibooks on an ipad mini. I am forever inadvertently advancing to the next or prior page without meaning to do so. Is there some way to require a double tap to advance the page, or to set the sensitivity lower so that the page doesn't advance every time I move imperceptibly?

Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address? This necessitates constantly going back to click the + sign to add each address separately.

Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address? This necessitates constantly going back to click the + sign to add each address separately. Is there some way I can open the contact list, click on all of the individual addresses to which I want to send the email without the list closing between each address entry, and have all of my address entries be listed to the email at one time? Something like it works in Gmail. I do not want to use set lists, I want to enter different addresses each time I send an email. And I am a very slow typist, so I don't want to type the first few letters of each recipient's name. It is much faster for me to just click on the e-mail addresses in the list as a group. It doesn't make any sense to me to have to reopen the contact list for each address, when it should be so easy to click on all of the addresses I want at one time and then click once to add them all to the email as a group. If there is a solution to this, please tell me. Thanks.

Vatlily,
Try this:
1. Select Mail>File>New Message.
2. Select Mail>Window>Address Panel.
3. Use (command+click) on the desired addressees in the Address Panel to create the list.
4. Click "To:" on the top left of the Address Panel.
The group that you selected will be added to the "To" field in your New Message.

Is there a way to set which keychain item is used by default for a site/application?

This question applies primarily to the keychain in Mavericks, but also the iCloud keychain and its use in iOS.
There are several sites and services for which I have multiple logins that serve different purposes. Whether it's because they are business/personal accounts, or accounts that pertain to different functions, I have multiple logins for many sites/services I use daily, however, there is usually one primary account for each that I use for most purposes.
What I would like to be able to do is set which of these logins appears by default. An example scenario might be if I have an "admin" account on a site, and a "dev" account that is used for testing purposes to Q/A the site from the perspective of a user who doesn't have administrative access. Most of my work happens under "admin" but whenever I go to the login page, the "dev" account prepopulates in the login form and I have to start typing admin and select that. It also does this on my iPhone, which is where this issue becomes very cumbersome, because there is no dropdown for me to select which credentials to use to autofill from. It appears to only allow autofill from whatever it sees as the first account to come up, and I can't seem to change that without deleting all the other keychain items that come up ahead of the one that I want. This kind of thing also poses a significant risk of accidents if, say, I have multiple payment methods saved and the one that comes up by default isn't my personal payment method, but a business account that's only meant to be used for business purchases. If that comes up first, if I don't replace it with my personal details, I might accidentally place a personal charge on a business account.
So I really have 2 questions:
1) Is there a way to set the priority order of which account populates a form by default from the keychain?
2) When filling out credentials on iOS, an "autofill" button appears at the top of my keyboard, and I can begin typing in a field and it will show the autocomplete of the username that I am typing, but if I click autofill, it replaces it with the original credentials and not those of whatever I began typing in. If I click on the username it's autocompleting, it just clears the autocomplete. Is there some way to choose which username I'm autocompleting a form with?
Thanks to anyone who has any ideas about a solution to this, and if there isn't, and if anyone at Apple is listening, in an ideal world, it would be like setting the priority order of known wifi networks, where you can drag your first choice to the top of the list.

This sounds like the age old problem with keychain & Safari. I don't know of a way to solve it without using something like 1Password.
The iOS app has it's own built in browser, so it has more control over what gets autofilled. Safari on OS X has an 1Password extension that handles account selection & autofill etc.
Keychain is great in principle, but it quickly falls down when you need tight integration with many ID's & different use cases (work, home etc).
I'd suggest you submit feedback to Apple about your thoughts. I did so years ago about this issue & this is how far we have come (back to the point where me.com synced passwords) :^)
http://apple.com/feedback/macosx.html
Other tools like lastpass or keypassx may also help if you want to truly segregate password storage, but that doesn't fix autofill, the way around that issue is to dedicate one browser for work.

Is there a way to set a default "Source Range" in AME when exporting from Premiere Pro CC?

When exporting a sequence from Premiere Pro CC, you are able to toggle between 4 drop down options within Adobe Media Encoder on what Source Range you'd like to export (Work Area, Sequence In/Out, Entire Sequence, Custom) as seen here:
Is there a way to set the default Source Range to something besides Sequence In/Out?
My reason for asking is that sometimes I export multiple sequences at once using AME's Queue. I add my custom presets to each Sequence and hit export, but SOMETIMES I may have accidentally marked an in point on my timeline and by default it's set to export only that In-to-Out part of the sequence.
I know what you may be thinking...well, just don't add any In/Out points to your sequence on the timeline or clear them first. The trouble is that I often don't see them or catch them when working quickly. In Premiere Pro CC, I use the "Lighter Brightness" Appearance setting because it's easier on my eyes after editing 10 hours a day, 6 days a week. Sure, darker looks cooler, but it kills my eyes for some reason. Anyway, PPro CC has a troublesome appearance issue in CC where it's not "optimized" for editing when you change it to a lighter appearance like it was in CS6. I've already contacted Adobe about this and another appearance issue (involving highlighted clips when in Lighter Appearance setting) and they are "actively working on fixing this appearance issue asap".
For reference, here's Premiere Pro CC in/out points in default dark appearance (notice the slightly lighter grey area):
Now here's that same in/out in "Lighter Appearance":
Not exactly optimized. Can hardly see it. Good luck spotting that little guy on a long timeline. Sadly, this affects in/out points in the Source Window as well. Really hard to see.
Conversly, CS6 looked the best (the blue REALLY stands out making things easy to see):
So my question again...is there a way to set the default "Source Range" to something else besides Sequence In/Out so that I don't end up doing what I just did and leaving for several hours while batch exporting only to come back and find that I exported only a "portion" of one of my big sequences?
Thank you!

shooternz wrote:
Here is the solution: Slow down. Give your project some love. Smell the roses.
Agreed about the roses but alas my next project always calls. Actually, I think what happens is I give each project SO much love that when it comes to exporting, I've run out of time.
shooternz wrote:
Then it would not be a default...it would be an option and you already have that option.
Semantics aside, I would love to be able to have it at least default to whatever option was last chosen. Or, perhaps I shouldn't use the word default again...I'd love it to simply remember my preferred setting. That's all.

Is there a way to set my settings in the latest version of Firefox so I can still zoom using the trackpad?

I have a MacBook. In previous versions of Firefox I could zoom in or out using my trackpad. Is there a way to set my settings in the latest version of Firefox so I can still zoom using the trackpad?

Some gestures have been removed in Firefox 4.
You can restore the zoom feature by changing the values of the related prefs on the about:config page.
browser.gesture.pinch.in -> cmd_fullZoomReduce
browser.gesture.pinch.in.shift -> cmd_fullZoomReset
browser.gesture.pinch.out -> cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift -> cmd_fullZoomReset
browser.gesture.pinch.latched -> false
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page.

Is there a way to set a preference for image resolution in PSE10?

Once I transfer image files from the camera to the Organizer (PSE10), they are listed in the information panel window as having a resolution of 180. I use the printer more than the internet for these files, so I really want the resolution to be 300 or above, and would like to set a preference to that effect. I know that I can resize them individually, or by a group, but I'd like to get the resolution set properly in the first place rather than adding yet antoher setp in my post processing efforts. I am assuming that the resolution is set by PSE10 because I can't find anywhere in the camera's (Canon Powershot SX40 HS) user manual that mentions that the camera sets a resolution. Is there some way that I can adjust the resolution that PSE10 assigns the images when they are imported into the Organizer? I'm using Windows 7 with 12GB Ram. Thank you very much.

Thank you very much for the info. I certainly appreciate it. I’ve been looking everywhere I could think of for how the resolution gets to be 180, and couldn’t find it. I wish they’d have something in their manual about that. Your info helps tremendously. Thanks again..

Is there a way to set a default solution .runsettings file in VS2013?

This is a question my coworker asked over on StackOverflow
[here], but hasn't received a single comment or answer. Thought I'd repost it here since I know the VS guys are more likely to see it here...
I'm using VS2013 with the built-in unit test framework. I've created a .runsettings file that sits in the Solution Items folder. When I select Test -> Test Settings -> Select Test Settings File, I am able to choose my .runsettings file and it works
as expected.
When I exit out of VS2013 and then re-load the project, I have to re-select the .runsettings file. Is there any way to set the default .runsettings file at solution level so it gets persisted?

Hi,
I can’t get your issue on my side(VS2012 Update 4 machine and VS2013 Update 1 RC machine). If you are using VS2012, please upgrade it to VS2012 Update 4. If you are using VS2013, please upgrade it to VS2013 Update 1 RC.
When I restart VS and re-load the project, the .runsettings file is still selected
with the Select Test Settings File menu option and .runsettings file is still used when I run the unit test.
I doubt that there is anything wrong with your VS. As I mentioned above, please reset your VS settings through Tools->Import and Export settings->Reset all settings…
If no help, try some other devenv commands to fix:
1.devenv.exe /safemode
2.devenv.exe /resetskippkgs
3.devenv.exe /installvstemplates
4.devenv.exe /resetuserdata
devenv.exe can be located under your VSlocation/Common7/IDE
What your need is to put it to run prompt and add commands to it.
If the issue still exists, please repair or reinstall your VS.
Meanwhie, if you have some anti-virus software running when you work with VS, please close them to check the reuslt.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Is there any way to set column width is GridaBagLayout?

Is there any way to set it up like tables in html - where you specify the width and height of the cell and then place the component inside it - with the component not resizing the cell unless it is larger than the cell area?
Thanks.

Thanks Paul, please excuse the sarcasm - I just found your recommendation funny. I actually found some examples of Box.filler and have created a method for adding one for each column I want:
public void addFillerColumn(int width, int height, int colNum, int rowNum )
panel.add( new Box.Filler(new Dimension(width,height),new Dimension(width,height),new Dimension(width,height)),
new GridBagConstraints( colNum, //gridx
rowNum, //gridy
1, //gridwidth
1, //gridheight
0, //weightx
0, //weighty
GridBagConstraints.WEST, //anchor
GridBagConstraints.NONE, //fill
new Insets(0,0,0,0), //insets(, left,,)
0, //ipadx
0 )); //ipady*/
}

Is there any way to set global language as english for users in portal

Hi,
Is there any way to set global language as english for all the users in portal (for all the screens,applications etc) irrespective of browser settings,language in jco,user settings in backend .
the reason why i am asking is we are implementing global implementation project and for some users in switzerland because of their browser is not english they are getting language other than english.we dont want to ask each user to change their browser language.we just want to force the portal to display content only in english
Thanks
Bala Duvvuri

Hi ,
You can add property 'request.mandatorylanguage=<your_language>'
and property 'request.mandatorycountry'
on file 'prtDefault.properties' located in :
..server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\system\properties\prtDefault.properties
Then restart the server.
See :
http://help.sap.com/saphelp_nw70/helpdata/EN/42/938297a5061d69e10000000a1553f6/frameset.htm
Regards,
Gilad

Is there some way to instruct iTunes to not check for updates of one of my apps?

2nd gen ipod touch running 4.2.1 (which is the highest availble for that generation).
I have a free weather app that just came out with an update. This new version requires at least 4.3.
Since I have the older version of the app, iTunes notifies me of the update, which is not going to work on my ipod. (Actually I downloaded it anyway just to confirm that it wouldn't work, and sure enough, it didn't even want to start).
So now that I have deleted that version and reloaded the old one, will I be stuck with that number 1 next to the Apps icon for ever more? Is there some way I can instruct iTunes to not check for updates of that app? Or is there some other solution that isn't apparent to me?

You get all the new iWork suite (Pages 5, Numbers 3 & Keynote 6) free with your Mac purchase. You just need to go to the App Store and sign in with your Apple I.D.
We warn against relying on the new iWork Apps, they really are just public betas and we are getting a number of users here with unopenable files. Bad news if this is your Masters.
iWork '09 can be purchased as a Boxed DVD set from Amazon US$27, or online.
It is much more usable and safer (not totally).
LibreOffice [free] does not have as polished a UI but is actively supported, and uses open file formats as well as MsOffice formats. It also has the advantage of opening/saving virtually every known format on the planet (wish it would do Pages!) and has a usable but not briliant intgrated database.
Peter

Is there a way to set Minimum Time Requirement for a course?

Is there a way to set a minimum time requirement in a Capitvate 5 course?
For example, the learner must be in the course for a minimum of 30 minutes or the course can not be considered "complete." This is a SCORM course and the learner's record in the LMS will not show the course as complete until the learner has been in the course at least 30 minutes. (This minimum time requirement may or may not be in conjunction with also passing a test with 80%. for example, in order to be considered complete, the user must be in the course for at least 30 minutes AND pass test questions with a score of at least 80%)
Perhaps some modification of the Timer Widget described by Lilybiri at http://bit.ly/ep5cOY?
Or, some modification of the SCORM Manifest?

Lilybiri,
Thanks to your 2 articles on variables and advanced actions as well as a few other resources (listed below) I was able to get up-to-speed enough on Adobe Captivate variables and advanced actions and implement your solution 90%.
The last 10% is...
You had recommended in Step 2 to "Attach a score of 0points to the CBNo and a score of 100points (just an example) to the CBYes."
My question is, how do I attach points to the buttons? Is "score" a system variable? Also, is there anything special I need to know about these attached points in terms of how they will be communicated to our LMS using SCORM protocol?
And as a final thought....
If someone exits the eLearning and then re-enters the next day, I think that the cpInfoElapsedTimeMS will reset to zero, is that correct? Is there way for the project to remember what the cpInfoElapsedTimeMS was? We are using this in conjunction with an LMS using SCORM, if that is helpful.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
RESOURCES FOR LEARNING ADOBE CAPTIVATE VARIABLE AND ADVANCED ACTIONS
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In case anyone else needs to get up-to-speed on Adobe Captivate variables and Adobe Captivate Advanced Actions (for Captivate 5), here are the resources I used. Hope others find them helpful useful as well.
Lilybiri:
Article 1: "Use Power of Variables in Captivate 5 (4) - without advanced actions": http://kb2.adobe.com/community/publishing/862/cpsid_86299.html
Article 2: "Unleash Power of Variables in Captivate (4&5) with Advanced Actions"
http://kb2.adobe.com/community/publishing/871/cpsid_87182.html
http://lilybiri.posterous.com/unleash-the-power-of-variables-in-captivate-5
Adobe Webinar by Vish at Adobe:
"Using Advanced Actions & Variables in Captivate 5" http://www.adobe.com/cfusion/event/index.cfm?event=set_registered&id=1808722&loc=en_us
CP Guru
"List of Adobe Captivate 5 System Variables" http://www.cpguru.com/2010/07/20/adobe-captivate-5-system-variables/
If you scroll to the bottom on the webpate, you can download a beautifully formatted PDF

HT5312 i need help with the security questions is there some way to get you to remind me what they were from e-mail or other wise

I need help with the security Questions is there some way to get you to remember them by e-mail of other wise

Read the HT5312 page that you posted from, it has instructions for how to reset them i.e. if you have a rescue email address set up on your account then steps 1 to 5 half-way down that page should give you a reset link.
If you don't have a rescue email address then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

My husband and I are using the same computer. He has a ton of songs in iTunes that I don't want...but when I sync my iPod I get all of his songs too. Is there a way of setting up another ITunes account without having to untick all of the ton songs iTunes

My husband has a ton of songs in iTunes that I don't want on my iPod nano. Is there a way to set up a separate account on the same computer in iTunes? Do I have to un-tick all of his songs (would take forever!! And then he would have to tick them again)....when we sync our iPods?

No. Its not possible.
Alternatively, create another user account in your computer. Install iTunes in that account with the library you wish to sync.

Is there some way to set focus on a JTable Cell?

Similar Messages

Maybe you are looking for