Is there upgrade for HTMLDB from 1.4 to 1.6 ?

I cannot seem to find any patches/upgrades which will upgrade the existing HTMLDB 1.4 to 1.6 version. Is there a way to do that ?
Thanks

Sergei,
You'll need to export workspaces and applications from 1.4 to files, then install 1.6 and import/install the workspaces, then the applications.
Scott

Similar Messages

  • ECC 6 Upgradation for PM from 4.7?

    Dear SAPINETS,
    My system is going for upgaration from 4.7 to 6.0 and i have to perform testing. I need to know what are the test i should perform to know that upgradation is succesful.
    Regards,

    hi,
    you have to test the entire PM Business Processes.

  • How to UPGRADE for FREE from Snow Leopard yo Lion

    Bought a new iMac on 18/11/2011.
    Came with Operating System 10.6.8
    Have now found out that I should have had the Lion OS installed by updating for free.
    Have tried for days now but no luck, I still have to pay for upgrading.
    Does anybody out there have the same problem and could tell me where to go ??
    Thanks a lot.

    EDIT:
    rkaufmann87 has the up-to-date info. My posting below is how it USED to work.
    Only AppleCare (Call the 800 number) can fix this for you.
    Any Mac sold by Apple (after about July I think) should have come with an Option for Lion, but they have to set it up for you.

  • Error in Upgrade for Workbooks from 3.X to 7.0

    Hi guys....i hope somebody could help me with this.....i have my new 7.0 system its an upgrade of 3.X, and i have a very strange problem....when i open workbooks in BEx Analyzer 7.0 a pop up message is shown that said the workbooks will be upgraded to 7.0 i click ok and execute the workbook, then i close the workbook and open again the same workbook i have again the popup for migration.....i see that the modification date didnt change.....this is very strange....and only affects some workbooks....and its not an authorization problem....my user have SAP_ALL .....
    Regards

    Hello Oscar,
    Every workbook that was created with the BW 3.x system, when you open it in the new BI 7 system, the system will prompt that message for migration.
    But only after you save the workbook (that you open with BI 7) in the BI 7 Analyzer is the workbook really saved. If you don't save it, it will continue to show that message and you'll continue to have it in version 3.X
    Also be aware that after you migrate (save in BI 7 version) the workbook will no longer be executed any more in the BW 3.x version, only in BI 7.
    Diogo.

  • Is there upgrade for ios5 for ipod touch 2g, is there upgrade for ios5 for ipod touch 2g, is there upgrade for ios5 for ipod touch 2g

    can i upgrade my ipod touch 2g to ios5

    No. iOS 4.2.x is the last version for your Touch.

  • Upgrade for NT from EA version

    Has any one heard or seen where I might find the upgrade or when it might be available?

    It's here!
    http://technet.oracle.com/support/products/iportal/listing.htm
    Rich

  • I have installed an UPGRADE for LR5 and by mistake downloaded an upgrade thinking it was an UPDATE

    Can I simply reinstall my discs? Should I de-install the download? Will I lose data i.e. photographs which I was working on while the new upgrade was installing?

    Thank you Jeff. I am using an iMac with the new Mavericks software.  I first installed an upgrade for LR5 from discs which I purchased some weeks ago and seemed to be using the installation to work on my photographs. Then a screen appeared talking about an upgrade  which seemed to be an update to the discs already installed for LR5 so I downloaded it while continuing to work on photos. There were no instructions to close application. When I did close the application at the end of my work session and then tried to reopen Lightroom it is asking for a serial number. When I put in the serial number I have on the discs it says can't use that because it's already being used.  So my question is can I deinstall this latest download and either recover the earlier version or reinstall the discs?  I would like to use the latest catalogue so that I have my latest work that I've done on my photos.
    Apologies if this seems confusing - I am confused as to what has happened and would appreciate help. Thanks in advance.

  • If I buy LR5 and LR6 comes out, can I upgrade for free?

    I need to upgrade from LR4 to accommodate my new camera. I hear LR6 is coming. If I buy LR5 and LR6 comes out within x amount of time, can I upgrade for free from LR5 to LR6 for free? I heard this somewhere and want to be sure. 

    The answer is that Adobe normally gives free upgrades if you buy the earlier version within 30 days of the release of the new version. But since no one knows when the new version will be released, you basically have to guess.

  • I want to give an iPad to my wife to use for work, but her employer won't let her upgrade her Macbook from Leopard to Lion.  It's pointless if she can't use iCloud.  Is there a workaround?

    I want to give an iPad to my wife to use for work, but her employer won't let her upgrade her Macbook from Leopard to Lion.  It's pointless if she can't use iCloud.  Is there a workaround?

    So far Apple has not upgraded the other Mac OS X versions to iCloud.  She can manually enter information to be synced in the cloud but that is really tedious.

  • I just upgraded my iPad from 4.3.3 to the newest - I think 6.1.3.  I cannot find my photos and videos.  I tried a restore, but after 3 hours, it's timing out.  Pardon my ignorance on asking this question; but is there a way to find my photos?

    I just upgraded my iPad from 4.3.3 to the newest - I think 6.1.3.  I cannot find my photos and videos.  I tried a restore, but after 3 hours, it's timing out.  Pardon my ignorance on asking this question; but is there a way to find my photos?  I do nto care about anythign else.
    Here are the steps I though I took this morning:
    Backup iPad
    Connect to iTunes and downlaod newest version of iTunes and then newest iOS
    restart Vista Laptop
    upgrade to newest iOS
    I knew somethign was wrong when it took about 6 hours to upgrade the iPad
    at the end it errored with this message error (-50), but the upgrade worked
    I was expecting to see all my photos but didn't see them
    I have tried a restore to a back up 2 times.  The first time took 3 hours and just sort of timed out - it kept saying that there was an hour to go
    I tried it again 2 hours ago and same message.
    They are very valuable to me and so now I am panicking
    Your help is much appreciated

    Hi Eric Ferguson,
    Thanks for using Apple Support Communities.
    For troubleshooting on this, take a look at this article:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/ts3694
    Error 13, 14, 35 and 50 (or -50)
    These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
    Best of luck,
    Mario

  • Hello,i have one iphone 3gs and i want it to upgrade my iso from 4.1 to 6 but now it dond wanna activate,what i can do?sorry for the language i am from romania so..

    i have one iphone 3gs and i want it to upgrade my iso from 4.1 to 6 but now it dond wanna activate,what i can do?sorry for the language i am from romania so..

    i am also having the same problem.....but there is no solution i am stil waiting for the responce of apple adviser.

  • I'm using a Mac.  I "upgraded" to LR5 from LR4.  I do not want to be a member of the "Creative Cloud".  I just want to use the software I purchased, specifically to upload to my SmugMug account.  Is there a way to use an add-on to do this?  Aperture and L

    I'm using a Mac.  I "upgraded" to LR5 from LR4.  I do not want to be a member of the "Creative Cloud".  I just want to use the software I purchased, specifically to upload to my SmugMug account.  Is there a way to use an add-on to do this?  Aperture and LR4 were easy but I'm finding it impossible without subscribing to CC.

    Sorry, maybe I don't understand, but why do you feel compelled to subscribe to CC if you already have a permanent Lightroom 5 licence?
    For the SmugMug plugin, a simple Google search ("smugmug lightroom plugin") gives this link to download the plugin:  http://help.smugmug.com/customer/portal/articles/121321
    Another way is to click the button "Find more services online..." in the the Publish Service section of Lightroom, and to search for SmugMug in the Adobe Add-ons portal; you will find a link to the latest plugin: https://creative.adobe.com/addons/products/1755

  • I have recently upgraded my iBookG4 from Tiger to Leopard 10.5.8 and find my Bluetooth USB adaptor no longer connects. The Bluetooth pane says inactive. Does Leopard require  USB 2.0. I've had the adaptor for some time so may be USB 1.0

    I have recently upgraded my iBookG4 from Tiger to Leopard 10.5.8 and find my Bluetooth USB adaptor no longer connects. The Bluetooth pane says inactive. Does Leopard require  USB 2.0. I've had the adaptor for some time so may be USB 1.0

    Bluetooth icon on menu bar shows bluetooth off. When opening bluetooth preferences it shows the devices I've connected previously,( my mobile phone), and other devices I've attempted to connect but not very successfully: my iPhone and MiniMac.  The bluetooth dongle in the USB port shows a continual blue light but does not react and the iBook does not recognise that it is there. There is absolutely no reaction when I try to pair my mobile phone, which I've done successfully before upgrading to Leopard, either by the iBook or the mobile phone.
    I assumed that Tiger was not bluetooth compatible with the iPhone or MacMini running SnowLeopard and hoped by upgrading to Leopard I could achieve some file transfers between the three devices (iBook, iPhone and MacMini)

  • I have a 2007 13" Macbook White. Is there any way to upgrade my OS from 10.6.8 to anything above 10.7?

    I have a 2007 13" Macbook White. Is there any way to upgrade my OS from 10.6.8 to anything above 10.7? I keep getting an error message when I try to download 10.8.3 because Apple didn't make it compatible with my machine, but I really only need 10.7. So is there ANY possible way to do this with my current Macbook? Thanks for the help guys.

    I have a 2007 13" Macbook White. Is there any way to upgrade my OS from 10.6.8 to anything above 10.7
    According to these system requirements, no, there is no way to go higher than Lion (10.7), as Mountain Lion (10.8) will not be compatible.
    http://www.apple.com/osx/specs/
    Also note that both Lion and Mountain Lion are memory hogs and the realistic minimum RAM should be 4 GB; you can run it with 2 GB, but depending on how you use your machine, you may not be happy with its performance.

  • Is there an easy way to upgrade your OS from 10.5.8 to 10.6

    is there an easy way to upgrade your OS from 10.5.8 to 10.6?
    Thanks for your help
    desmoutis

    Welcome to Apple Support Communities
    To upgrade, first buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    It's recommended to make a backup of your files. If the upgrade fails, you will lose data. After making the backup, insert the DVD and follow on-screen steps to upgrade.
    That disc will install 10.6.3, so open  > Software Update, and install OS X 10.6.8

Maybe you are looking for

  • Need to insert into a table 1 of the fields (CLOB)with more than 4000 chars

    Dear Gurus, As far I understood, I need to write a function which get as parameter the large text and using bind variables I can return a CLOB containing more than 4000 chars. I tried all I can do and feel I want to died. Please, can I get specified

  • Static on my iTunes...help

    I am getting a lot of static on my itunes, how do I get rid of it? It not just on the songs I download, but on shared files as well. It just started happening and makes it annoying to listen to any songs.

  • Indesign CC can not start

    I've installed the latest Indesign CC from Creative Cloud, it can not start, it always throw errors and quit. here is my OS : Mac OS X Lion 10.7.5 (11G63b) Please Help i can't work ! Thanks Here are the errors thrown : Process:         Adobe InDesign

  • How to delete an expired security certificate?

    Each time I open a fresh Firefox page, I get a message popping up 4 times informing me that a security certificate for a cashback set-up that no longer exists, has expired. How do I get rid of it?

  • Multiple Email Receivers for Error Notify

    Dear Gurus, Do you know how to set up multiple mail receivers for error notify? I tried out by using u2018;u2019 and u2018,u2019, and neither of them works. Thanks! Mao