Is there User Group and Role Reporting in SAP Enterprise Portal?

I want to know if there is a way to pull users statistics our of SAP Enterprise Portal like you can out of the R3 backend systems.
I would like functionality similar to the SUIM transaction. I know through user administration you can access any user, even a list of all users, and you can do similar lists with roles and groups. You can then access any of these things individually and look at their assignments. However, I want to do this on a large scale. I want to know for example every group that has a user assigned to it. Evergroup that has roles assigned to it. Or groups that have no user or role assignments. We have approximately 1904 groups in our Production Portal system and I am trying to clean up the groups that have no user assignment, but I don't want to look through them one by one.

Hi Chris,
There is no standard report available for this purpose. However all this information is stored in table UME_STRINGS.
You can write your own SQL queries to generate such reports. However please note that this table is not normalized, and it's a master UME table. You should use it strictly for READ ONLY purpose.
For a sample code you which i wrote some time back, you might refer:
http://forums.sdn.sap.com/thread.jspa?threadID=2088099&messageID=10859334#10859334
Thanks
Prashant

Similar Messages

Integration of WEBI report in SAP Enterprise portal

Hi Colleagues,
I want to create my adhco report using WEBI and want to publish it to SAP NW Enterprise portal .
While creating the i view in the EP i dint find any option in i view template in order to create an i view for WEBI report .
However there is an option to choose crystal report as a template while creating an i view but nothing for WEBI and Xcelsius as such. So how can we embedd our Xcelsius and WEBI report in SAP Enterprise portal .
Is there any option to intergate the SAP NW Enterprise portal and BO Portal .
Kindly sugest.
Vibhav.

You should be using opendocument links if using EP. with opendocument the URL contains all the pertinent info.
refer to chapter 8 of the SAP Integration kit guide for more info.
Post in the webi, general, or check out the outher documents link in the forum sticky post for the latest opendocument doc.
Regards,
Tim

Performance issue of BI Reports in SAP Enterprise portal -in SAPNW2004s

Dear friends,
We are integrating BI Reports in SAP Enterprise Portal 7.0 ( SAP NW- 2004s).The reports are running properly .But the issue here is reports are taking long time to open and leading it to performance effect.
Reports in BEX( Bi side) working lilttle better than EP platform.
And Even BI team is looking for ways to improve the performance.
Could you please share your ideas to implement in portal side to increase the performance.
Thanks and Regards
Ratnakar Reddy

Hello Mr. Reddy,
There are two possibilities for slow performance in BW reports, so we need to look into wether its slow in the BW system or at the frontend.
If the problem resides in the BW system then we should be able to trace the reports
and you can go for a SAP EW or GV sessin and SAP will provide recommendations.
If the problem resides at the frontend
Update the frontend servers to the latest frontend release.
Recommended Frontend Release 700
Recommended Frontend Patch 18
Update the frontend servers to the lates SAP GUI release as soon as possible.
Minimum Recommended SAP GUI Release 6.40
Your frontend PCs should fulfill the following requirements:
Each frontend PC should have 500 MHz and 128 MB main memory.
Because of a limit in the addressable memory, Windows 95 is not supported as Frontend OS for 3.X BW Systems. Please refer to SAP Notes 161993, 321973 and 366626 for details.
Please also check SAP Note 147519 "Maintenance strategy/ deadlines 'SAPGUI'".
If you still require any assistance from SAP support then raise a message under component ( probably BW-BEX-ET-WEB).
Provide your input, if you have any.
Thank you,
Tilak

Performance issue of BI reports in SAP Enterprise portal

Dear Friends,
We have integrated BI reports with SAP Enterprise portal 7.0.Reports are running properly But the issue is reports are taking more time to dispsaly its content and leading it to performance effect.
In Bex ( BI side) reports performance is little better than SAP EP platform. BI Team also looking for ways to improve performance at BI side.
Could you please share your valuable ideas to improve the performance at SAP EP side also ..
Thanks and Regards
Ratnakar Reddy

Hi ratnakar,
The first step is to identify which component is causing the performance problem. Run your report in the portal but try appending the string &PROFILING=X in the end of the URL. This will generate BI statistics which you can use to see which component (Java stack, ABAP stack, Database) is causing the performance issue.
Hope this helps.

Q: BOBJ reports in SAP Enterprise Portal?

Hi,
We want to be able to access Business Objects reports (Crystal Reports and WebIntelligence Reports) via the SAP Enterprise Portal. The integration between SAP BI and BOBJ is completed, and we can create WebI and CR reports based on our SAP queries, but we have not been able to understand how to publish the reports in the portal.
Does anybody have any idea of how to publish these reports (for instance if it is possible to create a direct link to the report in InfoView)?
Any help appreciated,
Thank you in advance,
Mikael

Hi Mikael,
this is the quick (URL iView) but not the recommended (BOBJ iView Template) way:
1. Log on the BOBJ InfoView, locate your report and look at its properties. Write down its CUID.
2. Go into the SAP Portal and create a new URL iView using following URL
http://<name of bobj web server:port of boboj web server>/OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=<CUID of your report>
Regards,
Stratos
NOTE: The openDocument URL works for BOBJ XI 3.x installations with Tomcat. Please look in the documentation about the syntax if you are using IIS.

Issues with BEx Reports in SAP Enterprise Portal

Hello Experts,
I am facing issues with BEx reports integrated in portal. Below are more details:
Scenario 1:
Execute a BEx report in the portal, save it in 'My Portfolio' using 'Save As' button. Now open the saved report from 'My Portfolio'. Below is the issue for this scenario:
When I open the saved report, I get 2 error messages and 1 info message at the top of the report. They are as follows:
The metadata of 'ITE' 'TEMPLATE_PARAMETERS' are incorrect for parameter 'COMMAND_PROCESSING'
The metadata of 'ITE' 'FILTER_PANE_ITEM' are incorrect for parameter 'TEXT_WRAPPING'
Variables for characteristic Fiscal year/period[0FISCPER] cannot be processed
Scenario 2:
Execute a BEx report in the portal, save it in 'BEx Portfolio' or 'Favourites' using 'Save As' button. Now open the saved report and click on 'Send' button. As expected, the BEx broadcaster wizard should appear but, it shows '400 BAD HTTP REQUEST'. While if I open the report (not the saved one) and click on 'Send' button, it works.
Helpful pointers appreciated.
Thanks
Vikash

HI Suman,
I am not adding the report to favourite using browser favourite. Below is the flow:
Run the report in portal.
There is a 'Save As' button at the top of the report. When I click that button, I get a pop-up with 3 tabs for saving the report.:
Favourite
BEx Portfolio
My Portfolio
save the report in the favorites or BEx portfolio tab and then open it and press 'Send' button
BEx Broadcaster Wizard should appear but instead of that, it shows '400 BAD HTTP REQUEST'.
If I press send for unsaved report, then BEx broadcaster Wizard is shown.
Thanks,
Vikash

Report to see user type and roles assigned to users in EP?

Hi,
a) Is there any reporting mechanism in EP? Any specific report which throws up user types and roles assigned to the users? There is an option of 'Export' in the user management role but unfortunately it does not give information on User Type.
b) If the group is assigned a role, How can we see ( in any report) the roles assigned to a group? In the 'export' option of the 'User Management' this information does not come.

By default Portal UME comes along with the installation of portal.
Sometimes we may integrate external users using LDAP. At that time users come from ABAP stack or some active directories. But you can also create users in the portal UME. The purpose of using LDAP is to maintain the users centrally rather than creating again in portal.
You can check them in user administration->identity management and search for the users.
THere you can see some users will be from UME and some from LDAP.
User Admin tool is nothing but User Administration only.
Raghu

Making users available for OpenSSO realm group and role assignment?? Help.

Here is the situation. We have 3 Open SSO realms set up. One we have called OpenSSO-Admin, a second called OpenSSO-Provider and a third OpenSSO-Internal. We are having issues provisioning and managing the OpenSSO-Internal OpenSSO-Provider realms, but OpenSSO-Admin seems to be fine.
Here is the behavior that is manifest.
In the 2 'broken' realms, when we create users and assign them to the appropriate Open SSO realm, they appear to be provisioned correctly in IDM as well as the realm (We have validated user creation in LDAP and everything about the user appears to be fine). When we view the groups and roles in the specific resources, we are presented with a list of users that are in Brackets and appear to be provisioned. The brackets indicate that the users are not found as available users. The bracketed users can not be unassigned, nor can any others. note, our bracketed users in the list of assigned users are created from a workflow which assigns them directly to the appropriate group and role based on their business role.
The third realm, OpenSSO-Admin works fine and we can add, and manage users in the groups and roles within the realm.
We have ruled out the workflow as a source as the problem persists when we use the tool to manage users. We can create a user from scratch and add them to the realms. In the 'Broken' relms, the users do not appear in thelist of available users to be assigned to the groups or roles. Yet in the 'good realm, everything appears fine. We can move users from one realm to another and the problem persists in the broken realms, but when a user is added to the 'good' realm, everything is fine.
I have tried reconciling and get no different results.
Question is, We have isolated that the issue seems to be in the generation / management of the left hand "Available Users" list. How and where is this generated from and how can we check/fix or regenerate this list?
Thanks.
Joe

I should clarify. We are using Sun IDM 8.1

Create User Groups and assign Access privileges in Reports

Hi All,
Could you share the document or explain which explains about the Standard method to create User Groups in CMC for BOBJ XI 3.1 architecture.
And how to assign privileges to user groups like view reports, folders, privileges to create/edit reports etc.
Environment:
- Backend - BW
- and BO XI 3.1 sp3
Thanks,
AK

BO XI 3.1 Administration guide
http://help.sap.com/businessobject/product_guides/boexir31SP3/en/xi31_sp3_bip_admin_en.pdf

Assign SQ03 Abap Query User Group to role

Please advise how to assign SQ03 Abap Query User Group to a role. Thanks.
Moderator message: please do more research before asking.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on May 12, 2011 5:40 PM

Hello Sunil,
The problem is that I have hundreds of users to maintain user groups.
found out that it is possible to assign user group to role and role to user groups. implementing hr authorization with in-direct assignment of auth. So if I could use sq10, user groups could also be link to position in the org chart.
sq10 does allow you to assign a user group to a role but when you assign the role to a user and the user runs a query, it reports that no user group has been assigned.
Suspect that there must be a parameter or switch that is not turned on
Regards

Restrict user group authorization on reporting

Hi all;
I've problem restriction of user groups on monitoring reports.
By using RSSM transaction I gave only one user group to reach the reports but I still see the other groups on report.
Thanks.
Korel.

Hi Chris,
There is no standard report available for this purpose. However all this information is stored in table UME_STRINGS.
You can write your own SQL queries to generate such reports. However please note that this table is not normalized, and it's a master UME table. You should use it strictly for READ ONLY purpose.
For a sample code you which i wrote some time back, you might refer:
http://forums.sdn.sap.com/thread.jspa?threadID=2088099&messageID=10859334#10859334
Thanks
Prashant

How to create Infoset&user group query--(query report)

Hi Guys,
how to create Infoset&user group query--(query report),
Pls send me the exact procedure with Example....
Regards:
Kumar .G

goto SQ03 and create an User Group If U want to create Ur Own.
Goto SQ02 to create Ur Infoset by Giving Logical database name or Simple Database table
Then Choose What ever data U need to be included in The Qurey in field Groups.
Then Generate the Infoset
Now Assign the infoset to user group
Now goto SQ01 and Click on Other user group Button and choose Ur user Group.
Then in the USer group select Ur Infoset and then create Ur own Query and save this.
Now select the infoset query and goto More functions under Query menu and Generate report name.
Now Create a transaction code for the report name generated.
Now use the Tcode.
Hope U have got the basic idea of creating Queries.
~BiSu

User= Group= SubGroup= Role: Now working when this link is used

Hai,
We are using EP 5.0 with LDAP 7.6 When a user id created it is attached to a group and the group is attached to a role. I introduced a nested group in this link as userid is attached to group, group is attached to sub group and subgroup is attached to role. When i did like this and login to the portal system the roles are not seen in the portal.
Below are the things which i did,
When a user id(Ex : MYTEST1) is created it is attached to a group(Ex : ESS_GE) by the below code.
       String group = "ESS_GE";
       String groupdn = "cn=" + group.toUpperCase() + "," + groupsRoot;
       String userdn = "cn=" + userid.toUpperCase() + "," + peopleRoot;
      // modifications for group and user
      LDAPModification[] modGroup = new LDAPModification[2];
      LDAPModification[] modUser = new LDAPModification[2];
   // Add modifications to modUser
   LDAPAttribute membership = new LDAPAttribute("groupMembership", groupdn);
   modUser[0] = new LDAPModification( LDAPModification.ADD, membership);
   LDAPAttribute security = new LDAPAttribute("securityEquals", groupdn);
   modUser[1] = new LDAPModification( LDAPModification.ADD, security);
    // Add modifications to modGroup
    LDAPAttribute member = new LDAPAttribute("uniqueMember", userdn);
    modGroup[0] = new LDAPModification( LDAPModification.ADD, member);
    LDAPAttribute equivalent = new LDAPAttribute("equivalentToMe", userdn);
    modGroup[1] = new LDAPModification( LDAPModification.ADD, equivalent);
   // Modify the user's attributes
   lc.modify( userdn, modUser);
   // Modify the user's group attributes
    lc.modify( groupdn, modGroup);
Group is attached to a role(EP_GE_USER_ROLE). So the link is User =>Group=>Role which is MYTEST1=>ESS_GE=>EP_GE_USER_ROLE. This linke is working perfectly
I introduced a nested group and changed the link as User=>Group=>Sub_Group=>Role which is MYTEST1=>ESS_GE=>ESS_GE_ONLINE=>EP_GE_USER_ROLE.
After this when I login with the user id MYTEST1 the Roles which are attached to ESS_GE_ONLINE is not shown. Any idea why the roles which are attached to group ESS_GE_ONLINE is not transferred to ESS_GE group. Should I have to add any other LDAP attributes apart from the one which are coded below.
String group1 = "ESS_GE";
String group2 = "ESS_GE_ONLINE";
String groupdn1 = "cn=" + group1.toUpperCase() + "," + groupsRoot;
String groupdn2 = "cn=" + group2.toUpperCase() + "," + groupsRoot;
//Add ESS_GE_ONLINE group to ESS_GE group
LDAPAttribute membership1 = new LDAPAttribute("uniqueMember", groupdn2);
modGroup1[0] = new LDAPModification( LDAPModification.ADD, membership1);
LDAPAttribute security1 = new LDAPAttribute("equivalentToMe", groupdn2);
modGroup1[1] = new LDAPModification( LDAPModification.ADD, security1);
//Add ESS_GE group to ESS_GE_ONLINE group
LDAPAttribute membership2 = new LDAPAttribute("uniqueMember", groupdn1);
modGroup2[0] = new LDAPModification( LDAPModification.ADD, membership2);
LDAPAttribute security2 = new LDAPAttribute("equivalentToMe", groupdn1);
modGroup2[1] = new LDAPModification( LDAPModification.ADD, security2);
lc.modify( groupdn1, modGroup1);
lc.modify( groupdn2, modGroup2);
Thanks & Regards,
H.K.Hayath Basha.

change that to the following and retest:
Joshua Fowler wrote:
I think you're correct. Under the Publish settings of the document, that's what "Class" points to.
Here's the first main section of the code:
package com.anselmbradford
import flash.display.MovieClip;
import flash.events.TimerEvent;
import flash.utils.Timer;
public class Main extends MovieClip
* Create a new CountDown object, listen for updates and pass it the date to countdown to.
public function Main()
var cd:CountDown = new CountDown();
cd.addEventListener( CountDownEvent.UPDATE , _updateDisplay );
cd.init( new Date(2015,3,9,20,00) );
* Update the display.
private function _updateDisplay( evt:CountDownEvent ) : void
Does this look correct?
Thanks again!

Interesting Information about Hyperion User Groups and Conferences

Ed Roske has an interesting post on his blog, including a letter from John Kopcke (SVP of EPM at Oracle). There is a lot of content discussing the disbandment of the Hyperion User Groups and the absorption by OAUG with the new Hyperion SIG (Special Interest Group). In addition there is discussion of conference's focusing on Hyperion content.
Take a look at http://looksmarter.blogspot.com/2008/06/john-kopckes-letter-to-hyperion.html
Best Regards,

Gary,
Thanks for nice post

How to manageimported users, groups, and computers in the "Magic Triangle"

How do I manage imported users, groups, and computers? Server Preferences versus Workgroup Manager? I can import users and groups with the former but it offers limited configurable options. I can view all users. groups. and computers (from active directory) in the latter, but it does not designate which accounts have been imported.
I've got a magic triangle setup, with my users, groups and computers in Windows Active Directory, and my MacOS X snow leopard server setup as a directory master, abd bound to AD as well. I wish to apply group policy like settings to my Mac OS X leopard and snow leopard clients.
Here's a summary of my goals:
1. Time Machine Storage for mac users when they logon to Mac OS X computers.
2. Automount group shares located on the Mac OS X Server.
3. Redirect user desktop and document folders to user shares either on the Mac OS X server or my Windows file server.
4. Automount a custom folder (for each user) located either on the Mac OS X server or my Windows file server.
5. Setup Mac OS X server as a printer server with quotas for all mac and windows computer users.
Goal #1 appears to be working. "need help with the rest. Thanks

I'm not sure you want to import users to use the magic triangle properly. I think importing creates 'Augmented Records' - the user icons have blue dots.
The principle is this…
Bind the server to Active Directory (AD) & create an Open Directory master (OD). This can be done from Server Admin, in the OD section, via the change button.
Then you use Workgroup Manager, set the viewing directory (tiny little globe in top left) to use LDAP records on the server - LDAPv3/127.0.0.1. Authenticate (lock on right of toolbar) add a group, then switch to to its Members tab, click + Then change the user list to show the AD records & add the AD users to the OD group. It sounds weird & wrong, but it is how it works.
You are never modifying the AD records, just assigning a group to the users in OD. It's why the clients need to bind to AD & OD.
From there you can set the Managed prefs (MCX) for the members of the OD group. It also helps to add a guest computer account to OD to assign computer prefs based on the macs that bind to the server - it's in the File menu when you select the computes list in OD.
I hope that's clear, not sure I can help with the other tasks, but they tend to fall into place once you have the complex start in place.

Is there User Group and Role Reporting in SAP Enterprise Portal?

Similar Messages

Maybe you are looking for