Is this a bug in packaging luakit?

I've recompiled webkitgtk2 without geoclue support, as it provided nothing (for me) but a bunch of extra dependancies. After compiling and installing was finished I have done "pacman -Rsn $(pacman -Qdtq) which removed geoclue with all its dependancies (enchant for example). It turned out luakit is hard dependant on (lib)enchant and was unable to run until I installed enchant.
Luakit is dependant on libenchant (part of enchant package) but if you check what pacman says about luakit's dependancies you won't find it.
Should I open a bug report as webkitgtk (one of the packages in question) is not the same on my machine and in the extra repo?

Pacman doesn't list dependencies recursively.
Most packages (including luakit) have a lot more dependencies than are listed when you do a 'pacman -Si <pkg>'. Each dependency listed by pacman will likely depend on other packages, and those packages will depend on still other packages, etc. etc.
I believe luakit has over 150 actual dependencies.

Similar Messages

  • Indesign CS5 fails to package all links into the links folder, is this a bug? Is there a fix?

    Indesign packaging leaves out some links, even though files are linked correctly prior to packaging. I am currently working on Indesign CS5, Mac 0S X, Version 10.5.8.

    I had a problem with links on the master pages not being packaged. I found this and did the 7.0.3 Adobe update but no success.
    I tried a few more web searches and found this
    http://indesignsecrets.com/packaging-graphics-on-the-pasteboard.php
    which is sort of the same problem.
    The gist is to enlarge the slug area to the max (152.4mm or whatever that is  in your preferred units). It seems that package ignores anything that has part of it on the pasteboard.
    This is a pain when you only want to collect the active items but I expect someone at Adobe will sort this out in due course.
    Hope this helps someone else

  • JDev 9.0.3, Business comp wizard, is this a bug?

    Howdy,
    Found something that perhaps is a bug, hoping you guys have fixed for the real release.
    1) Create a database connection, but don't fill in username/password. Don't check deploy password.
    2) Create new workspace and project.
    3) create new business component package in the project. On step 2, point Connection name to username/password-less connection. Alert says prompt will ask for credentials. No matter what I put in, with valid username/password entries, a Connect Error pops saying invalid arguments in call. Exception: oracle.jdeveloper.cm.CMException.
    Is this a bug? We're using dynamic credentials in our app with data sources, so username/password is left off.
    Thanks,
    Joe Tseng
    Technical Management Consultant
    TUSC
    [email protected]

    Joe,
    I've filed Bug#2561459 to track this problem.

  • Is this a bug for 10.3.9 installation

    Hi everyone especially mac experts
    This is my first visit to this forum. I have been using my Powerbook g4 12 inch for 3 - 4 years, never had any problem til now!!
    My mac has problem all the sudden, got hacked or something, I dont know, I cannot even restart, it hung since apple logo appear, only way is insert install disc + press C with only one option it allowed me to do "erase and install" no backup no upgrade!!!!
    Anyway, that is not my question, it just a whining, my question is when i tried to reinstall with my installation CD that came with my powerbook and/or panther CD with 3 blacks and 1 codeX, which I got it when I was a member of developer connect. The series of problem are as follow
    1. during installation of CD2, i got installation failure with error messages said some packages cannot install!!!
    2. after i ignore (1), by click "quit" which is only one option anyway, os started to ask me to fill in all information include setting user name and password for admin account. so i did. Then I start to do "software update", and it failed to update/install QuickTime 7.x.x. Then i tried to download only, unpackage and install myself, it has the same results
    3. From (2) i search solution on mac website by using winXP, and found that i have to remove some packages in /Library/../receipts/ and reinsert CD 2 again to reinstall, cool.. i will give it a shot. Unfortunately, it asked for admin password and i could not give a correct password, but i remember and have it written down on a paper. Then i check at Preference->account->admin and see it shows 7 digits or * instead of 9 digits. I wonder that someone might hacked into my computer and change it.
    Therefore, I decide to reinstall again, this time, i spent more time by include erase disk with option "write zero to disk" and no network connection to make sure there is no trace from hacker! Unfortunately, I got the same problem from (1) to (3) without update software d/l. therefore, i believe (3)is a bug it is obvious from my observation, if i cannot solve (3) i will not be able to solve (1) and (2), and i will not have my mac back to work
    Please give me advice, i already lost all my data and spent my weekend trying to fix these problems, which non can be fixed (yet)
    Thanks in advance

    Roam,
    Thanks again for your suggestion,
    "Furthermore one should always Repair Permissions both before doing a Software Update and again afterwards."
    I honestly dont know anything about this "Repair Permissions" from the name, i though it is a verification of authentication to repair OS or some kind of credential issue, and since i m admin user then there is no point to verify it, i should be allowed to do so. Again it is my first time to do this thing in 3 - 4 years of using panther, every time i update software i never ever do this! If this step is essential for every update and installation why dont apple put them as one of TODO step during the processes (as licensing agreement) instead of keep them as an option (just my thought) Anyway, I m glad u tell me about it, and i will give it a shot tonight.
    "That may because you didn't have sufficient disk space. In fact running out of disk space can create all sorts of problems. Please tell me how disk space is available on your
    start up drive."
    That what I thought coz i have only 5.x GB left in 60 GB HD. Thats why I claimed as whining and have to scarify the lost of data by reinstall panther in order to get my mac back to work
    "So are you saying it is a bug or it is a hacker, I don't believe it is either"
    Please see second update info about password, and i m not impose anyone to believe, thats why the topic is a questioning sentence "Is this a bug.."
    "This Discussion site is not Applecare. The people here give their time voluntarily to those who are receptive to help."
    Thats why i ask for "mac expert" not "apple authority/technician" and always appreciate any suggestion.
    Anyway, that great to hear from you and i have learned new thing from your suggestion. I will let u know when i have tried it.

  • HT4236 on syncing photos to my iphone from my mac (iphoto), just 2 or 3 per event retain the edited verisons, the rest are shown in the original version. I'm confused by this. Is this a bug? Is there a way to see all the photos on the mac-edited version o

    on syncing photos to my iphone from my mac (snow leopard) (iphoto), just 2 or 3 per event retain the edited verisons, the rest are shown in the original version. I'm confused by this. Is this a bug? Is there a way to see all the photos on the mac-edited version on iphn?

    Thanks for your reply
    I solved my problem,
    Definitely a bug in syncing through itunes.
    - Connect Iphone with MacBook Pro through USB
    - Go to iphone on itunes, photos, deselect photo synchronization.
    - Sync (all pics will be removed from iphone)
    - Close itunes, iphoto, disconnect iphone
    - Select in finder: (home)-pictures-iphoto library.
    - Sec click on iphoto library and choose "show package contents"
    - Delete iPod Photo Cache
    - Close finder
    - Empty trash
    - Reconnect iphone
    - Allow photo synchronization again and everything works smooth.
    After this, changes made in iphoto are instantaneously reflected in iphone photos.
    Once every hundred photos, one gets detached from iphoto and then changes are no longer reflected (buggy) :-(
    In this case I erase the photo in iphoto, sync, go back to iphoto trash, reestablish the photo from the trash and sync again.
    Hope this improves. Still have to try cloud though.
    Thanks
    RC

  • Is this a bug of NIO???

    I am using nio to write a network server.
    I use following code to close a SocketChannel:
    Socket s = sc.socket();
              if (s != null) {
                   try {
                        s.close();
                   } catch (IOException e) {     
                        e.printStackTrace();
              sc.close();
    It works fine. But sometimes s.close() will throw a java.lang.Error, this will lead my server to crash!
    StackTrace:
    java.lang.Error: Untranslated exception
         at sun.nio.ch.Net.translateToSocketException(Net.java:65)
         at sun.nio.ch.SocketAdaptor.close(SocketAdaptor.java:354)
    Caused by: java.io.IOException: Unable to finish a non-blocking socket action (This error message is translated by me, I am not in USA)&#12290;
         at sun.nio.ch.SocketDispatcher.close0(Native Method)
         at sun.nio.ch.SocketDispatcher.preClose(SocketDispatcher.java:44)
         at sun.nio.ch.SocketChannelImpl.implCloseSelectableChannel(SocketChannelImpl.java:684)
         at java.nio.channels.spi.AbstractSelectableChannel.implCloseChannel(AbstractSelectableChannel.java:201)
         at java.nio.channels.spi.AbstractInterruptibleChannel.close(AbstractInterruptibleChannel.java:97)
         at sun.nio.ch.SocketAdaptor.close(SocketAdaptor.java:352)
         ... 18 more
    The error will be throwed if I called it N times, N < 2000.
    Runing env:
    WindowsXp, Amd dual core, 1G ram, JDK1.6.02
    The Logic of my test case:
    Server S listen to port 8080 with one select thread,
    Client A, Client B
    A connect to S, and send a package to get some resource, and A wait
    B connect to S, and send a package to get the same resource, This cause S cause Client A,
    A finds it disconnected, it reconnect and do the same as B
    B finds it disconnected, it reconnect too ....
    now, there is a loop.
    (all these are doing in the select thread)
    I think A and B will do these forever, but after some time( serveral seconds ), the Error will be thrown and
    server crashed.
    I google it, and I found nothing useful. Is this a bug??

    B connect to S, and send a package to get the same resource, This cause S cause Client A, A finds it disconnected, it reconnect and do the same as BI don't understand this. Why does anything done by B have anything to do with A? let alone making it reconnect? There is something seriously wrong with the application logic here if that's the result.
    NIO isn't that matureWell, it wasn't that mature in 1.4.0 or 1.4.1, but that's five years ago. Haven't found anything major in it for years.
    @OP: does it work better if you close the channel directly rather than its socket?

  • Is this a bug in table operator

    I have an Oracle function that is invoked by the select statement as follow:
    select count(*)
    into i
    from table(
    select depts -- depts is a varray of dept_obj
    from table(company_package.f_getCompany(k))
    the function f_getCompany(k) gets invoked twice.
    but if I change the SQL to
    select depts
    into dept_array
    from table(company_package.f_getCompany(k));
    then function f_getCompany(k) will be invoked just once.
    Is this a bug within Oracle ? How can I get around that, I just want the function execute ONCE.
    Any help would be appricated.
    Thanks
    Here are the rest of the code
    create or replace type company_obj as object
    company_id number,
    company_name varchar2(20),
    depts dept_arr
    CREATE OR REPLACE
    type company_arr is VARRAY(10000) of company_obj;
    create or replace type dept_obj as object
    dept_id number,
    dept_name varchar2(30)
    CREATE OR REPLACE
    type dept_arr is VARRAY(10000) of dept_obj;
    create or replace package company_package is
    number_of_times int := 0;
    function f_getCompany(company_id number) return company_arr;
    end company_package;
    create or replace package body company_package is
    function f_getCompany(company_id number) return company_arr is
    comp_array company_arr;
    comp_object company_obj;
    dept_array dept_arr;
    dept_object dept_obj;
    begin
    dept_object := dept_obj(100, 'Dept 1');
    dept_array := dept_arr();
    dept_array.extend;
    dept_array(1) := dept_object;
    dept_object := dept_obj(110, 'Dept 2');
    dept_array.extend;
    dept_array(2) := dept_object;
    comp_object := company_obj(1, 'Company A', dept_array);
    comp_array := company_arr();
    comp_array.extend;
    comp_array(1) := comp_object;
    number_of_times := number_of_times + 1;
    dbms_output.put_line('number of times = ' || number_of_times);
    return comp_array;
    end;
    end company_package;
    ----------------------------------------------------------------------------------------------------

    I noticed that myself in our project.
    Our varchars2 are defined as VARCHAR2(xxx CHAR) - OWB puts the size*4
    In fact if you have special characters like umlauts (ü,ä,ö,...) it will use 4 bytes per character.
    You can try it yourself. Define a Varchar2(1 CHAR) and manually change the size of the Column in your mapping inside OWB (in filters, joins or your target table).
    Then shoot an umlaut through the mapping and will end up with a "too small" error.
    Dont mind the size*4 issue - we totally ignored it and run without error since 4 years now.

  • Pages 5.5.1: When opening a document created with Pages '09 (Version 4.0) with Pages 5.5.1 the page header and the page footer are deleted. How can this be prevented? Or is this a bug in Pages 5.5.1?

    Pages 5.5.1: When opening a document created with Pages '09 (Version 4.0) with Pages 5.5.1 the page header and the page footer are deleted. How can this be prevented? Or is this a bug in Pages 5.5.1?

    Same problem here (no graphics in header or footer) and the problem has been reported months ago. It is another bug/feature lost when Apple moves from 09 to the iCloud-compatible versions.  Complain to Apple, you may have better chance than me and they may finally listen to their users....

  • Is this a bug in OWB 11.2 - importing table metadata for character columns

    The Oracle® Warehouse Builder Data Modeling, ETL, and Data Quality Guide provides an overview of the data types supported.
    http://docs.oracle.com/cd/E11882_01/owb.112/e10935/orcl_data_objx.htm
    It says that for VARCHAR2 data type it saws (http://docs.oracle.com/cd/E11882_01/owb.112/e10935/orcl_data_objx.htm#CHDFIADI )
    "Stores variable-length character data. How the data is represented internally depends on the database character set. The VARCHAR2 data type takes a required parameter that specifies a maximum size up to 4,000 characters"
    That means , I guess, it says that when I import a table, any columns of type VARCHAR2(10) in the database should have its length show as characters in OWB, so a column of type Varchar2(10) in the Oracle database, should be shown as Varchar2(10) when imported into OWB table metadata via the OWB import function.
    However, if I have a database that set-up as a single-byte and import a table using the OWB import function a column that has a size of e.g. 10 in the database, is imported as OWB table metadata and the size is 10. Correct, I am happy.
    However, if the database is modified to support multi-byte characters, ALTUF16 encoding with the semantics set to "CHAR", then when I import the same table into OWB, OWB reports the size as 40, I guess its 40 bytes as in 10 characters @ 4 bytes per character.
    Is this a bug in OWB, as the datatype in the Oracle DB is varchar2(10), should OWB after importing a table not also report the column as VARCHAR2(10) ? Currently, is shows the column as varchar2(40).

    I noticed that myself in our project.
    Our varchars2 are defined as VARCHAR2(xxx CHAR) - OWB puts the size*4
    In fact if you have special characters like umlauts (ü,ä,ö,...) it will use 4 bytes per character.
    You can try it yourself. Define a Varchar2(1 CHAR) and manually change the size of the Column in your mapping inside OWB (in filters, joins or your target table).
    Then shoot an umlaut through the mapping and will end up with a "too small" error.
    Dont mind the size*4 issue - we totally ignored it and run without error since 4 years now.

  • Iphone 6 tells me that "Item not available" in my country UK, when i click on the itunes store icon for the app to open the music, movies or tv shows section of the app. is this a bug?

    I am based in the UK and have just got a new iphone 6, everything works well except when i try to turn on the itunes store app -  i can do a search and buy music etc that way, within the app, however, if i go to Music, Movies or the TV shows section within the Store app, i get a message come up saying "Item Not Available" - This item you've requested is not currently available in the UK Store, but it is available in the US store. Tap Change Store to view this item".   I therefore cannot browse the music, movies or tv shows sections at all, nothing shows up except that message.  All my previous itunes purchases have downloaded ok, and i can access them. My apple ID works fine and restrictions on the iphone are turned OFF. The App Store app works normally. Connection etc is all fine and I can access itunes  in the normal way on my ipad and laptop, so this is just an iphone problem. Any ideas? is this a bug? I cant find anyone else with exactly the same problem. By the way, the same message comes up when i click on the red Music icon, on the iphone (situated next to the Safari icon) and then go to the "Store" via that app.  my playlists are in tact, but as soon as i click that Store button, I am told that the Item is unavailable - not that i have chosen any Item lol, I just want to access the store in the normal way. Thank you in advance for any suggestions you can give

    It is working now. I no longer get the message about the item not being available in the US and I can access the store.

  • Open Cursor Issue because of file browse Item - Is this a Bug in APEX 3.2

    Hi All,
    I am using file browse Item to upload file into the database at two places in my application, but it seems whenever I am submitting those two pages, with file path or without file path, its opening an cursor which remains open after that, because of this open cursor count in the application is getting exceeding every time.
    For testing this I have made an dummy page containing just file browse item and submit button, and still it is increasing the open cursor count.
    Is this a bug in Apex file browse item or there is some other way to handle this.
    Please kindly help me in the above issue as this is affecting the production application.
    Thanks & Regards
    Sanjay
    Edited by: user11204334 on Dec 5, 2010 9:57 PM
    Edited by: user11204334 on Dec 5, 2010 9:58 PM

    Hi,
    One observation, Apex is switching the Session ID after one got killed ? I was working on Apex page with browse Item to test open cursor count,
    after killing the SID (227) on which the open cursor count was getting increase, it APEX automatically switches to new SID(149) for that session.
    Now the problem is even if I have two SID's and one hits the maximum open cursor count, It is not switching to other SID instead the whole application becomes unavailable.
    STATNAME SID VALUE USER
    opened cursors current 20 14 APEX_PUBLIC_USER
    opened cursors current 149 74 APEX_PUBLIC_USER
    opened cursors current 194 71 APEX_PUBLIC_USER
    opened cursors current 211 5 APEX_PUBLIC_USER
    opened cursors current 227 325 APEX_PUBLIC_USER Killed
    opened cursors current 244 15 APEX_PUBLIC_USER
    opened cursors current 20 14 APEX_PUBLIC_USER
    opened cursors current 149 76 APEX_PUBLIC_USER
    opened cursors current 194 71 APEX_PUBLIC_USER
    opened cursors current 211 5 APEX_PUBLIC_USER
    opened cursors current 244 15 APEX_PUBLIC_USER
    Please kindly help in this.
    Thanks in Advance
    Thanks & Regards
    Sanjay
    Edited by: user11204334 on Dec 8, 2010 1:02 AM

  • Is this a bug with BoEdge3.1?

    Can anyone help me on the issue which my customer is facing for BoEdge3.1
    Concerning  Error Message: You do not have enough Named User Licenses to make this user a named user. You have 55 Named User Licenses. (FWB 00013)
    This is the error message she was receiving when trying to change an
    existing user from Concurrent to Named under the Connection Type on the
    Properties panel.
    The current workaround was to delete the existing Concurrent user, then re-add the same user as Named.
    She have been going through this process of deleting existing users, and then
    re-adding them as Named and it was working okay. Then, it stopped
    working and she started getting the same FWB 00013 error message again.
    She was not able to create any Named users now. Basically, the workaround
    worked for a while - then stopped working.
    She currently has a total of 88 users. 21 of them are named. 67 of them
    are Concurrent. She is licensed for 55 Named.
    Once again, the system thinks she has 55 users marked as Named. But
    there are only 21 marked as Named.
    She did notice that as she was going through all of her existing list of
    users, in alphabetical order, she was opening the Properties tab and
    checking the Named/Concurrent status - as she got to the 55th user in the
    list that is when she started getting the error message again.
    Is this a bug with BoEdge3.1?
    And I got an ADAPT01194692.
    I am not sure that Is the ADAPT related to this issue.
    Please help me its very critical.

    Hi Salena,
    If you are an SAP Employee, request you to post this question at
    https://cw.sdn.sap.com/community/bobjtc
    Cheers,
    Subhodeep

  • Cannot see my picture stream on iPad with IOS 8.1.3. Pics from iPad are uploaded and visible on picture stream on iPhone 4, IOS 7. Is this a bug?

    I cannot see my picture stream on iPad with IOS 8.1.3. The pictures  from iPad are uploaded and visible on picture stream on iPhone 4, IOS 7. Is this a bug with IOS 8.1.3?

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    iOS: Troubleshooting Messages
      iOS: Troubleshooting FaceTime
    - Sign out and then sign back into Messages and FT. Note you will lose all messages presently on the iPod
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       

  • Emulator on OSX don't support capturing audio, is this a BUG?? SDK 3.0

    Hello all,
    well i'm trying to capture audio with the emulator on OSX. When i test the System Properties for capturing audio i always get FALSE.
    I tried the same application on Windows XP with the SDK 3.0 and it works, i'm getting True and can capture the audio with my microphone.
    Now i want to know if this is only a Bug and could be fixed or is the support for capturing audio on Mac OSX not implemented yet?
    Thanks
    Greetings

    What kind of problem about the display image in signature?
    How do you add the image into the message body when you send the message?
    Does it show correct through Web-based access?
    Outlook 2007 doesn't support some of Style Element, you may reference the link as below:
    http://www.campaignmonitor.com/css/
    Thanks.
    Tony Chen
    TechNet Community Support
    Thanks for your reply,  I know that some Style Elements won't be supported in Outlook, but this is not the reason.
    Please refer to my post previously, I post it but get no response.
    http://social.technet.microsoft.com/Forums/office/en-US/481170b1-f23f-4d46-9914-823326491846/is-this-a-bug-of-outlook-2007-about-images-displaying-in-signature?forum=outlook

  • When I press right click - Open in a new Tab on a bookmark on Firefox 4.0 nothing happens. Is this a bug? Is there a solution?

    When I press right click -> Open in a new Tab on a bookmark on the "Display your bookmarks" icon that is located on the upper right corner of Firefox 4.0 nothing happens. It only works if I press right click -> Open in a new Tab on bookmarks under the menu that is located on the upper left corner. Is this a bug? Is there a solution?

    No its working fine.
    Start Firefox in Safe Mode : How to start in safe mode
    If it doesn't work
    Create new Profile: Profiles

Maybe you are looking for