Is this a bug in Windows Server 2008's SetJob function?

This shows an apparent error in the implementation of SetJob on Windows Server 2008.
This is the source code for a simple NT RPC Service that can change the owner of its print jobs, from any account, on all Windows NT Operating Systems, EXCEPT Windows Server 2008.
On Windows Server 2008 the SetJob call only changes the Owner of the Print Job, if the service is run from the SYSTEM account. SetJob does NOT return an error indicating that it was unable to change the Owner of the Print Job, it just doesn't change the Owner.
There doesn't appear to be a published work around to enable changing the Owner of the Service's Print Jobs, on Windows Server 2008, for Services that are NOT running under the SYSTEM account.
It appears that a Hot Fix was released for the same (or related) problem for Terminal Services and changing the Owner of a Print Job from Services on Windows 2008 (KB 958741). This Hot Fix did not correct this SetJob Owner problem.
This is a link to my home HTTP Server...
Simple Print For Service and Client Source Code and Instructions Zip File
I've been asking about this, on the MSDN and TechNet forums for over a month. And in every case the replies have always been, ask in this other forum... When I respond that I have already asked in the other forum, I never receive another response...
In the big scheme, we aren't a big company, we have been selling this product since 1995. We have several thousand installations, a few of them have tens of thousands of users. Most all of our larger sites are holding off on upgrading to Windows Server 2008, until we find a solution to this problem, that doesn't involve having to retrain their users. Needless to say, we are getting more than a little heat about this...

Windows Server 2008 R2 SP1 (Beta) contains the fix for changing the ownership of a print job from a service that isn't running from the System account. I don't see it listed in the Excel Spreadsheet that lists the individual issues addressed.
This does not do anything to help 32 bit Windows Server 2008 users. But it does get rid of the problem for 64 bit Windows Server 2008 R2 users.
And only 17 months after I initially reported it...

Similar Messages

Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."

Hi,
Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."
DC:windows Server 2008 R2
Domain functional level:Windows Server 2003
When Winxp join domain, have no this error message.
I checked http://support.microsoft.com/kb/2018583?wa=wsignin1.0 does't work.
There have 3 suggestion in this article:
1.The "Disable NetBIOS over TCP/IP" checkbox has been disabled in the IPv4 properties of the computer being joined.
Doesnt's work.
2.Connectivity over UDP port 137 is blocked between client and the helper DC servicing the join operation in the target domain.
On my DC, I run netstat -an, reslut as below:
UDP 192.168.20.3:137 *:*
3.The TCP/IPv4 protocol has been disabled so that the client being joined or the DC in the destination domain targeted by the LDAP BIND is running TCP/IPv6 only.
We are not using IPV6.
This server recently updated from Windows Server 2003 to Windows Server 2008 R2. Before upgrade, when Win7 and Win2008 join this domain, also have the same error message.
Please help to check this issue.
Thank you very much.
BR
Guo YingHui

Hi Guo Ying,
I have faced this critical error which makes over-writes the host names in the domain when you join.
For example: Already you had a host name called as PC.domain.com in the domain.com Domain.
When you try to add the another host name called as PC in the domain.com Domain, it doesn't give you the duplicate name error on the network it does over-write the existing host name called as PC.domain.com & it will add the new host name into the domain.
Host name which got over-written will get removed from the domain. I faced this issue in my project. My DPM host name got removed from the Domain & new host name got joined into the domain which halted my backups for one day.
Final Resolution is as follows:
You need to start the dns console on the DC & drop down the domain name.
Select the _msdcs when you click on _msdcs it will show the Name Server's list on the right hand side.
You need to add the Domain Naming Master under the _msdcs or add all the domain controllers which you had.
After you add the Name server's try joining the PC OR Laptop to the domain which is successfully joins it.
Regards
Anand S
Thanks & Regards Anand Sunka MCSA+CCNA+MCTS

Download issue when Windows 7 Pro joins a Windows Server 2008 Active Directory

Hi,
I purchased 2 new Dell OptiPlex 3010 desktop computers that came with Windows 7 Professional operating system with SP1.
There were no Microsoft updates installed yet. After I added one of these Dell computers to the Windows Server 2008 Active Directory, I was not able to download several items.
Below are several examples:
1) I downloaded the Norton anti-virus installation file. This file is not the full installation of Norton; it is more of a file where you execute it and it will download the full installation from the Internet like from their Norton web
site. So when I executed this installation file, it does not download the full installation files.
It just hung at the screen saying “Downloading” and it will finally stop with an error (don’t remember the error message).
Note: If I have the full Norton installation file then I am able to install it on this computer with no problems.
2) I downloaded the Adobe Reader installation file. This file is not the full installation of Adobe Reader; it is more of a file where you execute it and it will download the full installation from the Internet like from their Adobe web
site. So when I executed this installation file, it hung at the downloading part and then it will error out with a “Actionlist Not Found” message.
Note: If I have the full Adobe Reader installation file then I am able to install it on this computer with no problems.
3) I installed Microsoft Office 2010 Standard version on this computer.
I configured Microsoft Outlook to retrieve emails from my email provider (pop and smtp settings).
After configuring Microsoft Outlook, I was able to send emails through Microsoft Outlook successfully (and very quickly), but he was unable to retrieve my emails. The progress bar for the Receiving in the "Outlook Send/Receive Progress" box
shows no progress. The Progress bar is not moving. There is a message at the bottom of Microsoft Outlook stating "Receiving message 1 of 6 (x.xx KB of x.xx MB)" and it is very slow. My new emails were not being retrieved at all.
I tried various pop and smtp servers that was available for my email provider, but all had the same effect.
4) I can access certain web sites (e.g.
www.yahoo.com, www.cnn.com) while I cannot access other web sites like
www.usatoday.com, my web hosting email site.
Note: I had a Dell computer with Windows XP Professional operating system and this computer does not have any of the above issues.
The above are only a few examples that I have experienced.
If I removed this Dell OptiPlex 3010 computer from the Windows Server 2008 Active Directory then I still experience the same issue.
So as another test, I setup the other new Dell OptiPlex 3010 with the same Windows 7 Professional OS with SP1.
This time, I did not join the Windows Server 2008 Active Directory and I was able to successfully download the full Norton installation files, download the full Adobe Reader installation files, download my emails from Microsoft Outlook 2010, etc.
But once I joined this computer to the Windows Server 2008 Active Directory then I am not able to download these files and emails at all.
It seems like there might be some group policy or a security setting that is preventing these downloads so I disabled the group policy on the Windows Server 2008 AD and Windows 7 Profession OS, but it didn’t resolve the issue.
I disabled all of the firewall programs on this Windows 7 Professional OS, but it still did not resolve the issue.
Since the Windows Server 2008 AD did not have DHCP installed, I installed DHCP and setup a scope.
Then configured the Windows 7 Professional OS to obtain an IP address, but it didn’t resolve the issue.
If I move this Windows 7 Professional computer to another network where it did not have any Active Directory; it just had a wireless router serving DHCP then everything works on the Windows 7 Pro computer.
Any ideas what is the root cause when a Windows 7 Professional computer join a Windows Server 2008 AD?
Thanks,
wl_tech

Hi,
Could you please tell some information for the AD environment and how it connect to the internet?
Regarding 3rd party installlers didn't work as expected, please also seek help in their offical website.
For outlook not receiving emails, could you please take a look in
Event Viewer and see if there are any special errors logged there?
And when trying to access the website like
www.usatoday.com, any special errors IE showed out?
Best regards
Michael Shao
TechNet Community Support

Unable to Install Windows Server 2012 on Windows Server 2008 R2 SP1 Hyper-V

My attempts to install are failing with a message "Windows cannot install required files. The file may be corrupt or missing....Error code: 0x800705070".
I am posting this on the Wondows 2012 Server forum but I have had exactly the same problem as described below with Windows 2008 R2 SP1.
As the title says this is on a Windows Server 2008 R2 SP1 host with all current updates. I have downloaded the ISO file from a Technet subscription file twice, once by direct download and once by the Akamai downloader. The virtual disk is connected with
the default IDE driver. I mounted both installation images as ISOs, located on a file system on the host server. I have tried installs by deleting the VM and recreating both the VM and a new virtual disk, re-using a previously created virtual disk, and
deleting the partitions in a previously created virtual disk, and executing the format command, and then attempting the install.
I have exactly the same problem trying to create a Windows Server 2008 R2 SP1 VM on the same host OS. With those attempts, I downloaded the Technet subscription iso 4 or 5 times, and burned one to a DVD which I attached to the created VM. Same
error message.
The virtual machines and virtual disks I created and used were all located on an RAID5 array, on a builtin Intel RAID controller using Intel Rapid Storage Technology software version 11.2.0.1066. The host Windows Server 2008 R2 SP1 uses this file system
but the OS is installed on a dedicated drive (C).
I had previously created a guest VM with Windows Server 2008 R2 (several months worth of updates ago) without drama.
I have spent hours reading forums and blog articles on this. A common response is to download the iso another time, and/or burn it to a DVD instead of mounting an iso image. Although I didn't do the later yet with 2012 Server, but I have done these
other steps attempting to install Windows 2008 Server SP1. The install process takes a while (not to mention doing multiple downloads). Given this seems to be a common recommended remedy, and indeed based on posts does seem to eliminate the problem is some
cases, why doesn't somebody change the Microsoft installer program so it does a thorough integrity check at the beginning of the install process?

Jeff,
After the exercise of Windows 2012 Server successfully installing (as I described above) I also successfully installed Windows 2008 R2 on Hyper-V. From my standpoint, I have eliminated the problem (which isn't the same as correcting the problem).
The answer to your specific question regarding Hyper-V support is that the motherboard I am using, an Asus P5Q, is not supported by Windows 2008 R2 because it doesn't use ECC memory, and the vendor doesn't say it supports Windows 2008. But I am sure you
know the motherboard vendors often don't test older motherboards with newer software versions. It appears that in specifying ECC memory Microsoft is trying to protect users of Windows Server from hurting themselves, not saying the software won't run.
Having said that, my suspicion in the beginning was, and still is, that it was some variable(s) left in an unknown state in the Hyper-V environment, which was why after trying to install Windows 2008 R2 several times I tried Windows 2012 which resulted in
the same error, and then encountered the same error trying to install Windows 7 on the same Hyper-V installation. The specific Hyper-V Windows 2008 R2 server had run without any operating problems for months before I started having trouble, and although it
had been quite a while since I had created VMs, that process used to work. The hardware didn't change. What changed was applying updates through Microsoft Update, and a few access control rights I changed, and at least I think, I set back to their original
value.
So in short, no, my hardware isn't supported by Windows 2008 Server. Two, your assertion that you are running the same software configuration that I am is very unlikely to be true. There are an extremely large number of things which are different between
your test system and mine, such as which Windows 2008 components are installed, what updates were installed and in what order they were installed, and what other third party software each of us is running, and between AD, and all the features, a large number
of potential differences in ACLs, options, etc. and I don't for a minute think this particular problem was caused by the underlying hardware.
I do appreciate your taking the time to try to help me, and I hope there is one thing you and I could agree on. Microsoft could pretty easily make it much easier to isolate problems. In this day and age reporting hex error codes (as opposed to doing the
table lookup in the error handling proc), and not providing more diagnostic information seems to me to be almost quaint. And in this case Microsoft can dismiss my problems on the grounds it was all on unsupported hardware. Unfortunately, I think they
are missing an opportunity to make their software better, because in my opinion what I encountered there are a set of conditions which will cause installations to fail that aren't going to get corrected.

What is the most powerful books for Windows server 2008 and R2?

Hi,
There are many books out there that cover Windows server 2k8 and its R2 successor but i wonder which ones to focus on. In the same time, all books are for one purpose, "Windows Server 2008". Each author has his/her own view on the platform. I don't
want to read them all just to avoid confusions and complications.
These are the list of books that i have along with books that i finished reading them:
Exam 70-640 Configuring Windows Server® 2008 Active Directory® (Finished this)
Exam 70-642 Configuring Windows Server 2008 Network Infrastructure (Finished this)
Exam 70-643 Configuring Windows Server 2008 Application Infrastructure
(Finished this)
Exam 70-646 Windows_Server__2008_Server_Administrator_Second_Edition (Finished this)
Mastering_Windows_Server_2008_R2 (Finished this)
McGraw.Hill.Microsoft.Windows.Server.2008.Administration.Feb.2008
McGraw.Hill.Microsoft.Windows.Server.2008.The.Complete.Reference.Feb.2008
OReilly.Windows.Server.2008.The.Definitive.Guide.Mar.2008
Sams.Teach.Yourself.Windows.Server.2008.in.24.Hours.May.2008
Sybex.MCTS.Windows.Server.2008.Active.Directory.Configuration.Study.Guide
Windows Server 2008 Active Directory Resource Kit (Finished this)
Windows Server 2008 Networking and Network Access Protection (Finished this)
Windows Server 2008 Unleashed
Windows Server 2008 R2 Unleashed
Do you think the unfinished books worth reading?
Appreciate your help.

Thank you for the reply. My goal is to read everything (ins and outs) about Win 2008 and R2 platforms before i jump into Win 2012. I have pretty good experience in certain roles in Win 2008 such ADDS and ADCS. As clarified, i've finished a good number of
books but i want to make sure that i didn't miss a single piece of information that maybe covered in another book.
Honestly, i find the Technet docs are informative but daunting. On the other hand, books written by authors are more friendly because authors can throw jokes while explaining a certain technology, which makes the reader more attracted to the topic. In addition,
examples, practices, labbing, and quizzes in the books are more fun.

Hotfix Compatibility: KB2522807 - Windows Server 2008 SP2

Can someone explain why this
Hotfix is not compatible with Windows Server 2008 SP2 when it states this is one of the OS prerequisites? There only seems to be a download for Windows Vista, 7 and 2008 R2 but not 2008 Standard.
I am seeing this exact issue on 2008 SP2 so would be nice to have the fix for it.
Thanks.

Hello,
according to
http://support.microsoft.com/hotfix/KBHotfix.aspx?kbnum=2522807&kbln=en-us this hotfix is for Windows Server 2008
R2 SP1
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Problems installing Crystal Reports 2008 Server on Windows Server 2008 serv

I attempted to install the Crystal Reports 2008 product on one of our Windows Server 2008 servers.
After installing disk 1
Crystal Reports 2008 Server attempts to open up in IE...... but opens up to a blank page
http://bmlfileserver:8080/CmcApp/
anyone have any idea why? why does it not prompt for the second CD?
Is this a compatibility with Windows Server 2008?

I'm attempting to install CRS 2008 on Windows Server 2008 as well, and I'm running into a few issues. Did you ever get yours resolved? I started by trying to use IIS, but I'm uninstalling it completely now and will try Tomcat instead. Which route did you go?

Installation of Solution Manager 7.00 EHP1 on Windows Server 2008

Dear Experts,
We are installing Solution Manager 7.00 EHP1 on Windows Server 2008 Enterprise Edition 6.1 on a 64 bit platform. When running the pre-requisite checker it shows that the OS build 6.1 is not supported. Does anyone know which version of OS WIN 2008 server is supported or whether the Solution Manager can be installed on Build 6.1. Kindly suggest.
Regards,
Rohan

Found this note: [Note 1383873 - Windows Server 2008 R2 Support|https://service.sap.com/sap/support/notes/1383873]...
and also this forum thread: [Is Windows Server 2008 R2 Enterprise Supported]
Hope it is helpful...
Hector Asiain
Map-h

Merge Module for Windows Server 2008

Hallo,
I made a project with C# in VS 2005, and when I ran this project on a XP machine where no VS 2005 was installed, I needed to make a Setup-Project with a CrystalReportsRedist2005_x86.msm on this machine.
Now I want to run this project on a Windows Server 2008, and this Setup-Project can´t be run on Win Server 2008.
Is there an other Mergemodule for Windows Server 2008?
Every thing runs exept Crystal Reports!
Can somebody help me please???

it was just a beginner mistake, i just had to convert the VS 2005 Project into VS 2008 Project, and install the runtime on the target machine (CRRedist2008_x86.msi). and that´s it!
it was not possible with the Merge Module.
at first I tried to do it with CrystalReportsRedist2005_x86.msm on a Windows 2008 Server.

Essential event viewer bugs with "Forwarded Events" log in Windows Server 2008 R2 and Windows 7

To my general experience, Windows event viewer is one of the most problematic, faulty management tools in the case of extensive use of its more sophisticated capabilities. The sole description as well as reproduction of some entangled failures would require
remarkable effort.
With the "Forwarded Events" log however, the situation becomes particularly worse in that even simple functionality fails and workarounds are difficult to find. That’s what I’ll describe here in order to share my experience with interested users.
For precision: I’ve extensively used event viewer on a German Windows Server 2008 R2 SP1 (Windows SBS 2011 Standard SP1). The bugs I found on that system, I could reproduce on a German Windows 7 Professional 64-Bit SP1, too.
Problem 1: Failure of even simple event filtering
To reproduce this problem, execute these steps on a test machine with any of the two OS mentioned above:
(i) To prepare log contents, do either of the following:
(a) populate some events to your local "Forwarded Events" log (most simply by subscribing events from other logs of the same machine; stop subscription if you have collected some events)
Or
(b) copy a non-empty log file "ForwardedEvents.evtx" from another machine (with any of the two OS mentioned above) to your test machine and open the file in event viewer.
(ii) Navigate to your "Forwarded Events" test log and open the filtering dialog. In the "Includes/Excludes Event IDs" field, type: 1-9000. Click OK.
(iii) Look at the results pane: Surprise, 0 Events! Do you really have no event IDs between 1 and 9000 in your test log?
(iv) Another example, if you have forwarded security events in your test log: Clear filter, if any previous filter is in place. Open the filtering dialog. In "Keywords" sub-dialog, choose "Audit Success". Click OK.
(v) Look at the results pane: Surprise, 0 Events! Do you really have no successful security monitoring events in your test log?
I’ll finish here. If you have a rich variety of events in your test log available, let your imagination run wild to test around. Finally include some simple manually created or modified XPath filters on the XML tab of the filtering dialog. I promise, you’ll
find a lot of additional strange results.
Problem 2: Cannot save manually selected events to .evtx file
Navigate to your "Forwarded Events" test log. In the results pane, select one or more events by highlighting them by mouse clicks. In context menu, choose "Save selected events". In the "save as" dialog, choose file type *.evtx
and save your file. Open the newly created file in event viewer. Result: Surprise, no events inside the new file!
Have more fun with forwarded events
Helmut

Did you mean that right click Forwarded Event and select "Filter Current Log..."? Since I can filter correct event vai the "Filter Current Log..." in my Lab environment.
Hi Justin,
yes, I mean "Filter Current Log ... " (in my German systems: "Aktuelles Protokoll filtern ... ").
What do you mean with "my Lab environment" exactly?
In the meantime, I performed additional tests. I copied the "ForwardedEvents.evtx" test file from Server 2008 R2 resp. Windows 7 to
(i) German Windows 8 Pro 64-Bit RTM
(ii) German Windows 8.1 Pro 64-Bit, up-to-date
in order to view and filter the file there.
Results: Same event viewer problem on Windows 8 RTM, but correct behavior on Windows 8.1!
Best regards, Helmut

How can I fix this printer error with Samsung SCX-4300 and SCX-4521f on Windows Server 2008 R2?

I have two printers installed on Windows Server 2008 R2 (64-bit):
1. Samsung SCX-4521f
2. Samsung SCX-4300
There are two computers (Windows 7 Professional, 32-Bit) connected to this server that utilise these shared printers.
The drivers installed are as follows:
SCX-4x21_Win7_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7 3.04.96:03 Print Driver 11 Dec, 2009 12.37 MULTI LANGUAGE)
SCX-4300_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7(32,64bit) 3.04.95:07 Print Driver Jan 19, 2011 53.07 MULTI LANGUAGE)
After printing documents for some time (within a 24 period) the printers no longer respond to print requests.
On the server opening "Control Panel\Hardware\Devices and Printers" shows the two printers with yellow exclamation marks.
The "SCX-4x21" printer shows the "Status" as "Needs troubleshooting" and "Printer: Error".
The "SCX-4300" printer shows the "Status" as "Needs troubleshooting".
Neither will print a test page.
Searching for new drivers automatically returns saying: "The best driver software for your device is already installed".
The error persists and nothing will print.
When double-clicking on the "SCX-4x21" printer (or going to "Control Panel\Hardware\Devices and Printers\Samsung SCX-4x21 Series") you see the following:
"Printer: Error" and "N document(s) in queue".
Clicking on either of these brings up the print queue and shows a document with the status of "Error - Printing".
As each job with an error is cancelled the next one attempts to print and also displays an error like the last.
Once all the jobs are cleared the printer information says "Printer: Ready".
Sending a "Print Test Page" sends the printer into an error state saying "Printer: Error".
With the "SCX-4300", sending a "Print Test Page" displays a bubble saying: "Toner Empty: Replace Toner".
However, I can't see any specific error messages.
How do I find out what exactly "Needs troubleshooting"?
Please can anyone advise further?

The printer (SCX-4300) has stopped again.
Since it has been stopped I have done your recommendations:
Unticked the "Enable bidirectional support" option under the "Ports" tab in the printer properties.
Set the "Interactive Services Detection" to Automatic and started it.
Unfortunately the printer did not start printing, the print jobs did not restart or delete.
I decided to check the Operational logs that we enabled.
The first job I see goes like this:
Information: Rendering job 41.
Error: The print spooler failed to delete the file C:\Windows\system32\spool\PRINTERS\00041.SHD, error code 0x2. See the event user data for context information.
Information: The print job 41 was sent through the print processor SSE1MPC on printer Samsung SCX-4300 Series, driver Samsung SCX-4300 Series, in the isolation mode 1 (0 - loaded in the spooler, 1 - loaded in shared sandbox, 2 - loaded in isolated
sandbox). Win32 error code returned by the print processor: 0x0.
Information:Printing job 41.
Information:Spooling job 41.
This job actually printed.
Other jobs printed fine with no error.
There are no other errors in the "Operational" log other than the "print spooler failed to delete" error.
Any ideas what to try now?
Update: Unticking the "Enable bidirectional support", clearing the print queue and then trying again seems to have fixed the problem for now.

Windows Server 2008 R2 - You might not have permission to use this network resource. The request is not supported.

Hello !
I have a server with Windows Server 2008 R2 (AD, File Server, DNS Server and DHCP Server) that not access network share other Domain Controller.
Well, is very crazy.
I view network shares by network computers and devices,
but not \\domain_controller or \\IP_domain_controller.
I execute ping for succeed for all servers.
Follow error bellow:

irectory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine SRVMTZDC01, is a Directory Server.
Home Server = SRVMTZDC01
* Connecting to directory service on server SRVMTZDC01.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=shcorp,DC=local,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=SAO,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=CWB,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=POA,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=RIO,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=VIX,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=SSA,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=FOR,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=BHZ,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=BSB,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=RCF,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=BEL,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=shcorp,DC=local,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC05,CN=Servers,CN=SAO,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC06,CN=Servers,CN=CWB,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC13,CN=Servers,CN=POA,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC07,CN=Servers,CN=RIO,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC08,CN=Servers,CN=VIX,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC09,CN=Servers,CN=SSA,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC12,CN=Servers,CN=FOR,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC04,CN=Servers,CN=BHZ,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC10,CN=Servers,CN=BSB,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVRCFDC11,CN=Servers,CN=RCF,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 12 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\SRVMTZDC01
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... SRVMTZDC01 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\SRVMTZDC01
Starting test: Advertising
The DC SRVMTZDC01 is advertising itself as a DC and having a DS.
The DC SRVMTZDC01 is advertising as an LDAP server
The DC SRVMTZDC01 is advertising as having a writeable directory
The DC SRVMTZDC01 is advertising as a Key Distribution Center
Warning: SRVMTZDC01 is not advertising as a time server.
The DS SRVMTZDC01 is advertising as a GC.
......................... SRVMTZDC01 failed test Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... SRVMTZDC01 passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
Skip the test because the server is running FRS.
......................... SRVMTZDC01 passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... SRVMTZDC01 passed test SysVolCheck
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... SRVMTZDC01 passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Role Domain Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Role PDC Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Role Rid Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
......................... SRVMTZDC01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC SRVMTZDC01 on DC SRVMTZDC01.
* SPN found :LDAP/SRVMTZDC01.shcorp.local/shcorp.local
* SPN found :LDAP/SRVMTZDC01.shcorp.local
* SPN found :LDAP/SRVMTZDC01
* SPN found :LDAP/SRVMTZDC01.shcorp.local/SHCORP
* SPN found :LDAP/9956d321-332f-482c-855c-8bceee885bb6._msdcs.shcorp.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/9956d321-332f-482c-855c-8bceee885bb6/shcorp.local
* SPN found :HOST/SRVMTZDC01.shcorp.local/shcorp.local
* SPN found :HOST/SRVMTZDC01.shcorp.local
* SPN found :HOST/SRVMTZDC01
* SPN found :HOST/SRVMTZDC01.shcorp.local/SHCORP
* SPN found :GC/SRVMTZDC01.shcorp.local/shcorp.local
......................... SRVMTZDC01 passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC SRVMTZDC01.
* Security Permissions Check for
DC=ForestDnsZones,DC=shcorp,DC=local
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=shcorp,DC=local
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=shcorp,DC=local
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=shcorp,DC=local
(Configuration,Version 3)
* Security Permissions Check for
DC=shcorp,DC=local
(Domain,Version 3)
......................... SRVMTZDC01 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\SRVMTZDC01\netlogon
Verified share \\SRVMTZDC01\sysvol
......................... SRVMTZDC01 passed test NetLogons
Starting test: ObjectsReplicated
SRVMTZDC01 is in domain DC=shcorp,DC=local
Checking for CN=SRVMTZDC01,OU=Domain Controllers,DC=shcorp,DC=local in domain DC=shcorp,DC=local on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local in domain CN=Configuration,DC=shcorp,DC=local on 1 servers
Object is up-to-date on all servers.
......................... SRVMTZDC01 passed test ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=shcorp,DC=local
Latency information for 7 entries in the vector were ignored.
7 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=shcorp,DC=local
Latency information for 7 entries in the vector were ignored.
7 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=shcorp,DC=local
Latency information for 7 entries in the vector were ignored.
7 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=shcorp,DC=local
Latency information for 7 entries in the vector were ignored.
7 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=shcorp,DC=local
Latency information for 7 entries in the vector were ignored.
7 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
......................... SRVMTZDC01 passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 14100 to 1073741823
* SRVDC01.shcorp.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 11600 to 12099
* rIDPreviousAllocationPool is 11600 to 12099
* rIDNextRID: 11737
......................... SRVMTZDC01 passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... SRVMTZDC01 passed test Services
Starting test: SystemLog
* The System Event log test
An error event occurred. EventID: 0x00000422
Time Generated: 05/02/2014 12:55:01
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\shcorp.local\SysVol\shcorp.local\Policies\{1A69D491-B88A-4F66-B294-4ABEC8C62886}\gpt.ini from a domain controller and was not successful. Group
Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An error event occurred. EventID: 0x00000422
Time Generated: 05/02/2014 13:11:54
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\shcorp.local\SysVol\shcorp.local\Policies\{1A69D491-B88A-4F66-B294-4ABEC8C62886}\gpt.ini from a domain controller and was not successful. Group
Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
A warning event occurred. EventID: 0x80001083
Time Generated: 05/02/2014 13:18:00
Event String:
TCP/IP failed to establish an outgoing connection because the selected local endpoint was recently used to connect to the same remote endpoint. This error typically occurs when outgoing connections are opened and closed
at a high rate, causing all available local ports to be used and forcing TCP/IP to reuse a local port for an outgoing connection. To minimize the risk of data corruption, the TCP/IP standard requires a minimum time period to elapse between successive connections
from a given local endpoint to a given remote endpoint.
An error event occurred. EventID: 0xC0002719
Time Generated: 05/02/2014 13:20:41
Event String:
DCOM was unable to communicate with the computer 8.8.4.4 using any of the configured protocols.
An error event occurred. EventID: 0xC0002719
Time Generated: 05/02/2014 13:21:03
Event String:
DCOM was unable to communicate with the computer 8.8.8.8 using any of the configured protocols.
......................... SRVMTZDC01 failed test SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=SRVMTZDC01,OU=Domain Controllers,DC=shcorp,DC=local and backlink on
CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
are correct.
The system object reference (serverReferenceBL)
CN=SRVMTZDC01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=shcorp,DC=local
and backlink on
CN=NTDS Settings,CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=SRVMTZDC01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=shcorp,DC=local
and backlink on CN=SRVMTZDC01,OU=Domain Controllers,DC=shcorp,DC=local
are correct.
......................... SRVMTZDC01 passed test VerifyReferences
Test omitted by user request: VerifyReplicas
Test omitted by user request: DNS
Test omitted by user request: DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : shcorp
Starting test: CheckSDRefDom
......................... shcorp passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... shcorp passed test CrossRefValidation
Running enterprise tests on : shcorp.local
Test omitted by user request: DNS
Test omitted by user request: DNS
Starting test: LocatorCheck
GC Name: \\SRVMTZDC01.shcorp.local
Locator Flags: 0xe00031bc
PDC Name: \\SRVDC01.shcorp.local
Locator Flags: 0xe00033fd
Time Server Name: \\SRVDC01.shcorp.local
Locator Flags: 0xe00033fd
Preferred Time Server Name: \\SRVDC01.shcorp.local
Locator Flags: 0xe00033fd
KDC Name: \\SRVMTZDC01.shcorp.local
Locator Flags: 0xe00031bc
......................... shcorp.local passed test LocatorCheck
Starting test: Intersite
Skipping site SAO, this site is outside the scope provided by the
command line arguments provided.
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
Skipping site CWB, this site is outside the scope provided by the
command line arguments provided.
Skipping site POA, this site is outside the scope provided by the
command line arguments provided.
Skipping site RIO, this site is outside the scope provided by the
command line arguments provided.
Skipping site VIX, this site is outside the scope provided by the
command line arguments provided.
Skipping site SSA, this site is outside the scope provided by the
command line arguments provided.
Skipping site FOR, this site is outside the scope provided by the
command line arguments provided.
Skipping site BHZ, this site is outside the scope provided by the
command line arguments provided.
Skipping site BSB, this site is outside the scope provided by the
command line arguments provided.
Skipping site RCF, this site is outside the scope provided by the
command line arguments provided.
Skipping site BEL, this site is outside the scope provided by the
command line arguments provided.
......................... shcorp.local passed test Intersite

MS-DOS.This system doesn't support fullscreen mode in windows server 2008

MS-DOS.This system doesn't support fullscreen mode.Choose close to terminate the application. Unable to open full size screen mode for MS-DOS in virtual windows server 2008

Please anybody could suggest why the MS-DOS does not open full size mode in Windows server 2008. PC cate shell for windows application Is running and alerting this error msg. This system doesn't support fullscreen mode. Choose close to terminate the application.
Please can any body help on this regard.

Does windows server 2008 internet printingwork with Iphone as I really could do with finiding this out

I have a job on next week integrating iphone and was wondering if itwill work on windows server 2008 internet printing?
I am a bit of a newby to iphones
IT Support Costs
Thanks

This apparently would be possible if the server is running the HP ePrint Enterprise server. HP has an app that then allows an iOS device to print to it. There may be other, similar services, though I haven't found any. Perhaps someone else will know.
This is the iPad forum, by the way.
Regards.

When am trying to install Windows server 2008 OS. Error msg was coming 0x80070070:"not having enough space for installation"..Even though i have 20GB space?..Pls resolve this issue earliest.

Hi Guys
I have an issue please help on that earliest.
When am trying to install Windows server 2008 OS. Error msg was coming 0x80070070:"not having enough space for installation"..Even though i have 20GB space?..Pls resolve this issue immediately.
Regards,
Shiv

Is this a clean install or an upgrade? 20 GB, though greater than the minimum, is pretty minimal. How much memory do you have on the system? 2008 would try to create a page file of 1.5x physical memory, so if you are building on a large
memory system, you could be having an issue there.
"Pls resolve this issue immediately"
Forums are not for support. They are monitored by people, like yourself, who are willing to take time out of their days to provide the benefit of their past experience. If you need support, you need to purchase a support contract from Microsoft
or some other party.
. : | : . : | : . tim

Is this a bug in Windows Server 2008's SetJob function?

Similar Messages

Maybe you are looking for