Is this a bug or am I using the wrong flags in userChrome.css

I'd like to have my Bookmark Toolbar automatically hide until I move my mouse over the location. I found some code a while ago to do this, but I never really tried it until now with FF4. When I put in the code and move the bookmark toolbar into the self-hiding panel, it works fine until I open a new window or exit/restart the browser.
<br />
<pre>#PersonalToolbar {display: none;}
#navigator-toolbox:hover > #PersonalToolbar {display: -moz-box;}
</pre>
The auto-hide until hover works fine with the box, but the Bookmark Toolbar comes up completely empty. No arrow, just empty space. Every time I comment out the line in userChrome.css, the buttons reappear. When I move the bookmark toolbar out and then re-enable the line and restart, the buttons are fine when I move them back in until the next exit.
I've tried this on three machines (all Windows 7 though, both 32-bit and 64-bit) and the behavior is the same. I've also tried disabling all add-ons and extensions with no change in the results.
Is this a bug or am I using the wrong flags (-moz-box)? Thanks for any ideas/help provided.

cor-el:
Thanks for the suggestion. I already tried rebuilding that file as well and it didn't help. Also, all the changes I make are retained from session to session in terms of placement and what's shown/hidden, it's just the contents of the bookmark toolbar that disappear. The toolbar is still there and I can drag things to it, but again, they disappear after restarting the browser.
edit (clarification):
When I say the items disappear, I mean they are no longer visible or clickable. They are still there in the sense that they appear in the Bookmark menu and if I move the Bookmark Toolbar from its own toolbar into the space next to the Menu Toolbar, they are then shown.

Similar Messages

Bug report: Firefox5 uses the wrong unicode fonts (tested on Hebrew fonts)

Even though the css defines the fonts as
font-family: Arial,Helvetica,sans-serif;
Firefox5 which I have just upgraded to does not use the Hebrew Ariel font but goes for the first Hebrew font it finds installed on my system. In my case it's a font family called TheSmokerSerif, but since this is not a system font I assume this issue would be encountered by other users too.
I recommend updating FF5 with a bugfix soon as this is bound to affect many unicode sites and would render Firefox5 unreadable (literally)

I am also experiencing this annoying issue in FF5. On some websites (usbank.com, tweetdeck.com, for example), the primary Helvetica/Arial fonts are being replaced with the first Helvetica font it finds in my Windows fonts folder. As a result, ALL text on the screen was using some ultra wide + bold Helvetica font and near impossible to read.
It took me a while to track it down, but after finding and manually DELETING the wrong Helvetica font being used from the Windows fonts folder, I restarted Firefox, and then the main font was replaced with some Ultra Light variant of Helvetica (the next font in line). I then deleted THAT font, restarted, and now websites are displaying correctly again.
This is pretty annoying, as somehow the two Helvetica fonts I deleted are being automatically reinstalled on my system after a day or two. And when this happens, Firefox starts using the wrong Helvetica fonts again.
Unfortunately I JUST fixed it again otherwise I would provide a picture or two. But I searched for "Firefox using wrong helvetica font" in Google and found this support thread.
I hope this bug gets resolved very soon!
(Using Windows 7 Professional on Core i5 notebook w/4gb ram)

HT203180 I purchased a video from iTunes but it will not sync to my iPod. I get a message stating that the video "was not loaded to the iPod because iyt cannot be played on this iPod." I tried to use the "create an iPod version" but the command is graye

I purchased a video from iTunes but it will not sync to my iPod. I get a message stating that the video "was not loaded to the iPod because iyt cannot be played on this iPod." I tried to use the "create an iPod version" but the command is grayed out

I was refering to the "sample rate", normally 44.1 KHz, the iPod might not be able to play tracks with a non-standard rate. Otherwise I'm not sure what the issue might be.
tt2

My audiobook is for sale on iTunes, but iTunes is using the wrong "Preview" section. The section they used is the only 30 sec. in Spanish and the rest of the book is in English. How can I get iTunes to fix this?

My audiobook is for sale on iTunes, but iTunes is using the wrong "Preview" section. The section they used is the only 30 sec. in Spanish and the rest of the book is in English. How can I get iTunes to fix this?

Hello,
Is your problem solved ? i got exactly the same problem... So boring...
Thanks

I have purchased a macbook air with 64 gb hard disk. the available space is only 10gb. With this available space, i can't use the system effectively. kindly advise.

I have purchased a macbook air with 64 gb hard disk. the available space is only 10gb. With this available space, i can't use the system effectively. kindly advise.

You should have bought one with a larger SSD. You can regain some space by disabling the sleepimage file:
To disable safe sleep, run the two following commands in Terminal:
$ sudo pmset -a hibernatemode 0
$ sudo nvram "use-nvramrc?"=false
When done, restart your computer. Now go delete the file "/private/var/vm/sleepimage" to free up some hard drive space. When you put your computer to sleep it, should happen in under five seconds; my MacBook now goes to sleep in two seconds.
[robg adds: To state the obvious, with safe sleep disabled, a total power loss will wipe out whatever was open on your machine. To enable safe sleep mode again, repeat the above commands, but change hibernatemode 0 on the first line to hibernatemode 3, and =false to =true on the second line. You'll then need to reboot again. Personally, I prefer the safe sleep mode, even with the slower sleep time and hard drive consumption -- even if for no other reason than it's great when changing batteries on a flight.]
You can also delete unneeded files:
Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion's Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

I've forgotten the answers to my security questions, and for some reasons My rescue email is not active now, I can only access to my primary email, I have just redeemed a $25 gift card this morning, I was unable to use the money now. what should I do?

I've forgotten the answers to my security questions, and for some reasons My rescue email is not active now, I can only access to my primary email, I have just redeemed a $25 gift card this morning, I was unable to use the money now. what should I do?

You need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(110676)

Error: This disk needs to be repaired using the Recovery HD. When I boot on Recovery and run verify disk, the error doesn't come anymore. Just when I run verify disk on normal mode. Anybody has seen this before?

My Macbook Pro (Retina, 13-inch, Early 2013) has been freezing out of the blue probably once every two months. I restarted on safe mode, went to Disk Utility, repaired permissions and ran "Verify Disk" and got the following:
Invalid directory item count(It should be 114483 instead of 114484)
File system check exit code is 8.
Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.
Rebooted on Recovery mode and ran "Verify Disk" but the message didn't appear anymore, thus not letting me to access the "Recovery HD" procedure.
When I restart normally and do the disk verification I get the same error.
Has anybody come to something similar?
Suggestions?

I never ever run a Verify Disk. I simple repair the disk drive and then the user partition(s).
And do one or two Safe Boots.
Also helpful to have two full backups: TimeMachine at least, plus a clone of your system drive and data.
Install or clone the system to an external hard drive, repair that and then boot from it, check that everything works, repair the internal drive.
You need to use Repair to TRIM an SSD.
Lots of problems with Yosemite when updating install a new OS. Always better to backup, erase, install, and then use Setup Assistant to import and restore settings and files.
Probably better to post in the MacBook Pro forum or better yet, in Yosemite forum.

I used the wrong email to set up my phone and now its diseabled how can i fix this

i used the wrong email to set up my phone and now its diseabled how can i fix this

The developer has something else called bubo bubo. I don't think what you're using is suported anymore.

I used the wrong password for my belkin wifi. Now that I know the correct password I can not get pass the unable to connect or join message. I have turned off all the options such as wifi and join and also put my touch to sleep.. but nothing seems to work

I used the wrong password to join my new belkin wifi. Now that I have the correct password, I can not get the to the join screen with the space to type in the password. I continue to get the unable to join message. I have put the touch to sleep and I have turned on and off the wifi and join options on the Network screen page. Does anyone know how to get pass this block of the wrong password to a new page that will allow me to type in the correct password. I see there is a option that asks if I want to reset the network settings.. is that what I should do? and what does it erase when I do that? Thanks for any input anyone has.

Yes. Reset network settings. Head to Settings -> General -> Reset and tap Reset Network Settings.
B-rock

I accidentally created an iCloud account using the wrong email address for my username - I already have an iCloud account with a different email address username. Is there any way I can merge these accounts?

I just upgraded my MacBook from OS X 10.6.8 to Mountain Lion so that I could stream from my other devices (iPhone and iPad) to my MacBook. After making it through the upgrade process, I realized that I used the wrong email address for my iCloud username when starting up on the MacBook. My iPhone, iPad, and iTunes are under my Hotmail email address and I accidently used my Gmail email address for the MacBook. Is there any way I can merge these two icloud accounts together? I tried changing my account information to add the other email address, but wasn't allowed because another account was using the name (duh). If I can't merge them, how could I change the MacBook from the Gmail address to the Hotmail address so that all my devices are on the same icloud account? It'd be nice if I could keep the free 5GB of storage that comes with my purchase of the software, but I'd rather lose the storage than not be able to stream.

To change accounts on your Mac, go to System Preferences, sign out of the current account, then sign into the new account. When you sign out of the current account it will delete synced data from your Mac. Assuming your data (such as contacts, calendars, etc.) is in the other iCloud account, it will be synced to your Mac when you sign into this account.

My hard drive crashed on me Macbook Pro. After it was replaced I could not reload Aperture 3 because I used the wrong S/N twice.

I tried to reload Aperture 3 on my newly replaced hard drive and was unsuccessful because I used the wrong S/N twice.

See this knowledge base article:
Troubleshooting Professional Application Serial Numbers http://support.apple.com/kb/TS2005
Try to remove your System ID file(s) and enter your serial number(s) again:
The System IDs are located here:
/Library/Application Support/ProApps/
If present, remove the file Aperture System ID, then launch the Aperture and enter your serial number.
Regards
Léonie

Used the wrong email

So i made an apple ID account and i used the wrong email. I put the credit card number and all the information in it. i dont know whos email it is, but can they steal money from the card

You should change the email to your correct email address so you don't have any issues with the account in future. Follow the steps in the article below to do this:
Apple ID: Changing your Apple ID

I want to link my other email accounts to my imail so I can see them all at once. When I enter their account information, imail says I'm using the wrong passwords but I know they are correct. What now?

I want to link my other email accounts to my imail so I can see them all at once. When I enter their account information, imail says I'm using the wrong passwords but I know they are correct. What now?

This was EXACTLY what I needed about the purchases I made from my device. However, is there a way to re-download other ones you've made from a computer? Because I realized some of them were not just purchased from my device.
This is a picture of what it looks like now:
http://tinypic.com/r/107quxu/7
As you can see, the stuff circled in red doesn't give me an option to download from Cloud Beta because it already says "downloaded".
any way to get around that?

Unable to login to ePrint Center. It says I'm using the wrong password. When I try to use "Forgot

Unable to login to ePrint Center. It says I'm using the wrong password.
When I try to use "Forgot Password", it rejects my email address. I give up.

The issue you're experiencing is most likely due to an old Snapfish account registered under your email address. ePrintCenter and Snapfish account information is stored in the same place and I've seen this conflict before. You will need to go to http://www.snapfish.com/snapfish/welcome, click the "Sign In" in the top right hand corner of the page and then click the "forgot password" link and enter the email address that is causing your problems, you should receive an email from Snapfish that will let you create a new password there. Once you've created a new password for Snapfish, try to Sign In on ePrintCenter (http://www.eprintcenter.com/) using your email address and the new password you created for Snapfish.
Let me know if you have any further issues. Thanks
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

HT204074 Used the wrong account for iCloud. How to Change it

I just got an ipad, and I used the wrong account for iCloud. When I try to change it in settings it is greyed out. How do I change I cloud so I can use this for work?
Never mind, I fixed it. I deleted the account, and put the new one in. Just a new interface.
thanks;

Welcome to the Apple Support Communities
Open Settings > General > Restrictions and deactivate Restrictions

Is this a bug or am I using the wrong flags in userChrome.css

Similar Messages

Maybe you are looking for