Is this bug with Mixin Inheritance of JavaFX?

mixin class DogMixin
function getLegs():Integer{4;}
mixin class ParrotMixin
  function getLegs():Integer{2;}
class WhyThis extends DogMixin,ParrotMixin
var mythis :ParrotMixin = WhyThis{};
println(mythis.getLegs());This prints 4.
While if I change the order of inheritence in class WhyThis
class WhyThis extends ParrotMixin,DogMixin
}putting ParrotMixin before, it prints 2.
Surprisingly and expectedly if I do not take, value in variable and if I directly print it out println(WhyThis{}.getLegs()); it gives design time error.

Solved

Similar Messages

  • Has anyone else noticed this bug with multitasking gestures on iOS 5?

    I recently updated my iPad 2 to iOS 5 and have just noticed this bug with multitasking gestures. 
    If you're currently in an app and use the four-finger swipe up to open the app switcher, and then subsequently close another app that's open in the background from the switcher, the app doesn't seem to fully close.  What I mean is that if you now use the four-finger swipe right/left to switch apps, when you get to the place where that app you closed was, it's still open, and after you view it, it pops back into the app switcher.  It seems like the multitasking gestures feature isn't recognizing that you've closed the app and that it should skip it from now on. 
    If you do the above steps again, but this time after you close the app from the switcher, use the five-finger pinch to go back to the home screen, it seems to clear the "cache" being used by the the gestures feature.  Now if you go back into any app and swipe left to right, the closed app won't load up anymore (which is how it should correctly work). 
    Has anyone else noticed this, or can anyone else reproduce the bug as I described?  I'd appreciate it if an Apple employee could confirm that this is a bug in iOS 5 and not just something wrong on my end.  Thanks in advance. 

    02-May-200702:03 PM
    scoobyman wrote:
    Hi keffa
    After the time spent and attention to detail in replicating this fault, I do think that you should email your findings to Nokia Care to be found on:
    http://www.nokia.co.uk/A4222231
    This is after all a discussion forum and others may find the same bug, but until it is logged at Nokia there is little chance of future modification if required!
    Done already. They may of course have corrected this in the 11.x firmware currently being rolled out but as I don't yet have access to it I can't say.
    Useful links: Phone firmware update | Nokia support site

  • Has anyone seen this BUG with Time Warp and Dissolve?

    I'm doing some real basic slow-mo clips, transitioning with various dissolve wipes. I've come across a problem that is extreemly frustrating! I'm wondering if anyone has insight on a fix or if Adobe does service packs or fixes that I might be able to install.
    If you put two clips adjacent to each other on a timeline, apply time warp, set percentage to say 30% of realtime, then apply a dissolve between the clips, clip B, the outclip will play in reverse for a period equal to about 1/3 of the duration of the clip.
    This is true scrubbing through the timeline and even rendering.
    VERY ANNOYING!
    I'm going to call support tomorrow, but that's not going to help me get my project finished any sooner since this is a critical element in this composition. I've tried the time remapping method, but the frame-blend is no match for the pixel motion of time warp.

    Steve,
    I think your post #11 was being sarcastic, but you left a little wiggle room for it not to be. With the sarcastic interpretation, I must add my thoughts:
    Here is the link to the Adobe bug report form
    . It is important that users who discover bugs with reproducible steps file them - otherwise they don't stand a chance of ever getting fixed. Steven Gotz's advice was sound in this regard.
    As to the discussion of workarounds - since this is a User-to-User forum, the best that we as a community can do is help each other out with workarounds, since none of us here have the power to actually fix anything.
    The important thing to glean from SG's post is the definite need to file a bug report.

  • Has anyone seen this bug with embedded images?

    If I embed a wide image in this post and you click on it to zoom it up, is it centered in the safari window or center WRT the monitor?  Basically can you see all of it?

    It looks like this, here. It's done that for a long time, unless Safari extensions are switched off, regardless of there being any installed.

  • Does an upgrade to 3.7.0 fix this bug Bug CSCus92830

    5760 Wireless Lan Controllers running 3.61 became unreachable and had to be rebooted, it appears to be affected by the following bug CSCus92830.
    Will upgrading to 3.7.0 fix this problem

    Hi all,
    We are too hitting this bug with a 5760 in code 3.6.0. The input queue counter of the TenGig interface keeps on growing, until it reaches 100%:
    wirelessController5760-D-0-1#sho int te1/0/1 | incl  Input queue
      Input queue: 155/2000/0/0 (size/max/drops/flushes); Total output drops: 0
    Can you confirm this is the same bug as you mentioned: CSCus54365 and CSCus92830?
    The reload temporary fixes the issue for a few days. We have also tried to upgrade to code 3.6.1, but the issue remains.
    A definitive fix in code 3.6.2 would be more than welcome...
    Andre.

  • Is this a bug with BoEdge3.1?

    Can anyone help me on the issue which my customer is facing for BoEdge3.1
    Concerning  Error Message: You do not have enough Named User Licenses to make this user a named user. You have 55 Named User Licenses. (FWB 00013)
    This is the error message she was receiving when trying to change an
    existing user from Concurrent to Named under the Connection Type on the
    Properties panel.
    The current workaround was to delete the existing Concurrent user, then re-add the same user as Named.
    She have been going through this process of deleting existing users, and then
    re-adding them as Named and it was working okay. Then, it stopped
    working and she started getting the same FWB 00013 error message again.
    She was not able to create any Named users now. Basically, the workaround
    worked for a while - then stopped working.
    She currently has a total of 88 users. 21 of them are named. 67 of them
    are Concurrent. She is licensed for 55 Named.
    Once again, the system thinks she has 55 users marked as Named. But
    there are only 21 marked as Named.
    She did notice that as she was going through all of her existing list of
    users, in alphabetical order, she was opening the Properties tab and
    checking the Named/Concurrent status - as she got to the 55th user in the
    list that is when she started getting the error message again.
    Is this a bug with BoEdge3.1?
    And I got an ADAPT01194692.
    I am not sure that Is the ADAPT related to this issue.
    Please help me its very critical.

    Hi Salena,
    If you are an SAP Employee, request you to post this question at
    https://cw.sdn.sap.com/community/bobjtc
    Cheers,
    Subhodeep

  • Persistent Aggregates bug with logic - anyone else see this ?

    A long while ago I posted a bug report regarding the use of aggregates with the Stealthplug guitar audio interface. I also reported this on the apple bug report system.
    Basically, when using Logic8 with stealthplug and OSX Tiger ( latest 10.4 ) I configured an aggregate using AudioMIDI setup program, configuring Stealthplug as the input and the built in audio as the output.
    When one creates an audio track with the aggregate name selected I Logic8
    preferences INITIALLY one can get audio input to show up, the "record" button appears and one can hear audio output to the main macbook audio outputs. However on repeated use and selection/deseletion of the particular named aggregate one finds that the stealthplug input is no longer enabled ( the record button disappears).
    I found out recently that if I delete the aggregate ( I only had one aggregate st up ) and create a NEW aggregate, this time with a different name, but with the same settings ( stealthplug as input, built in outputs as output ) then one can get the aggregate to work initially in logic8. However after a few sessions, or switching between audo devices in preferences, the aggregate again fails to work, by this i mean I no longer get the "R" button appearing in the channel strip for the input.
    Stealthplug works fine when selected itself if one selects this as the device, but NOT when used through an aggregate. I suspect this is something to to do with aggregates and not stealthplug.
    My suspicions is that it has something to do with the way logic8 or the CoreAudio system stores its aggregate preference information since I find that if I delete the original aggregate but recreate the same aggregate settings using a different name then the aggregate will work for a short time.
    This really needs fixing since aggregates are potentially so useful.
    Anyone else seen this with stealthplug or another audi interface ? is the Aggregates system just plain buggy? dos this problem go away in Leopard ?

    Well I can say that after installing updates to QuickTime is appears I have been having a lot of trouble with Aggregate Devices as well. I use 2 896HD MOTU interfaces and after a few sessions of Logic, the Aggregate device stops working. I can either (a) reset the computer, (b) sometimes reset the coreAudio driver (works rarely) or (c) create a new Aggregate device like you have and it all starts working again.
    Even worse, some of my USB MIDI interfaces like the Fantom X7 just loose connection as well. If I remove the USB and then plug back in, it's recognized again immediately.
    Something is seriously broken and I have NO clue where to begin to help fix it. The only thing I could do is re-install OSX 10.5 and not do the quicktime updates and see if that helps. Unfortunately, that is a LOT of work! (I use like 146 AU plugins total).

  • I've a "bug" with the apps downloading. This one stops at the end and stays like that infinite. The app doesn't appears normally on the homescreen. Someone can fix this?

    I've a "bug" with the apps downloading. This one stops at the end and stays like that infinite. The app doesn't appears normally on the homescreen. The app is on the home screen, and its downloading is blocked at its end, without showing the app like it should when it's finished downloadung. Does someone can help me and fix this please?

    Hi Tom
    Thanks for replying!
    I had heard that these switches didn't stack unless everything was identical.
    I only tried it at all out of pure desperation.
    I've applied and tested every version 3 firmware in standalone mode via a console cable and xmodem.
    They either never come up properly receiving decompression errors and reboot constantly in a loop.
    Occasionally they stall / jam and stay there displaying the same error with no rebooting.
    And twice out of 80-100 times I got it to boot to the username and password screen in standalone mode.
    But as soon as I made a change it crashed and started the rebooting cycle again.

  • When trying to edit a photo, it disappears (black screen) or screen is full of lines. Is this a bug with the latest software update?

    After updating with the latest software, when trying to edit a photo, it disappears (black screen) or screen is full of lines. If I blindly crop or edit the photo, when I exit edit mode, those changes have been made, but obviously this is unacceptable. Is this a bug with the latest software update?

    There are several possible causes for the Black Screen issue
    1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
    5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help: As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • Downloaded 11.0.3 (42) 64 bit to my MacBook Pro and it crashes every time I select a song a use the 'add to' function to add to a play list. It's never done this before, is it a bug with the new version?

    downloaded 11.0.3 (42) 64 bit to my MacBook Pro and it crashes every time I select a song a use the 'add to' function to add to a play list. It's never done this before, is it a bug with the new version?

    You could just disable updates. Change these settings in about:config.
    * app.update.auto - set to false
    * app.update.enabled - set to false
    You can still check for updates with the "Check for Updates" button in the About Firefox window, but it will download the update file anyway if there is an update available. You can also check which is the current release from here:
    * http://sjc.mozilla.com/en-US/firefox/new/

  • TS3274 After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.

    After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.

    Hi Midnightbrat,
    Welcome to the Support Communities!
    The troubleshooting steps for the camera on the iPad are similar to the iPhone:  I've highlighted the pertinent steps below:
    Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Camera
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tapping Settings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Third-party cases can interfere with the autofocus/exposure feature and the flash; try removing the case if you have image-quality issues with photos.
    Try turning the iPad off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try switching between the front and the back cameras to verify if the issue persists on both.
    I hope this information helps ....
    Have a great day!
    - Judy

  • My email Box show blank messages with date 31/12/00.This bug passed my 3GS to 4S.How can i fix this?

    My email Box show blank messages with date 31/12/00.This bug passed my 3GS to 4S.How can i fix this?

    My email Box show blank messages with date 31/12/00.This bug passed my 3GS to 4S.How can i fix this?

  • [svn:osmf:] 15680: This submission tries to address a bug with absolute time support.

    Revision: 15680
    Revision: 15680
    Author:   [email protected]
    Date:     2010-04-23 16:36:42 -0700 (Fri, 23 Apr 2010)
    Log Message:
    This submission tries to address a bug with absolute time support. As a result, it fixes a bunch of bugs as follows:
    FM-765, FM-766, FM-776, FM-777, FM-778, FM-779, FM-780
    Ticket Links:
        http://bugs.adobe.com/jira/browse/FM-765
        http://bugs.adobe.com/jira/browse/FM-766
        http://bugs.adobe.com/jira/browse/FM-776
        http://bugs.adobe.com/jira/browse/FM-777
        http://bugs.adobe.com/jira/browse/FM-778
        http://bugs.adobe.com/jira/browse/FM-779
        http://bugs.adobe.com/jira/browse/FM-780
    Modified Paths:
        osmf/trunk/framework/OSMF/org/osmf/elements/f4mClasses/DVRInfo.as
        osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/HTTPNetStream.as
        osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/HTTPStreamingF4FIndexHandler.as

    Have done.... I had also sent a copy of the AB database to support on another case using Snow Leopard.  I had hoped it was fixed in Lion.

  • This bug makes the router unmanageable with SNMP

    Hello, I'm working for Orange Business Services and filed this bug.  Orange Business Services is shipping this 881 router on large scale and we are hitting this bug more and more.  This is really anoying as we can no longer monitor them with SNMP

    Sorry, what is the bugid?
    Do you have a case open with the TAC?

  • After installing iso6 on new ipad I cannot access itunes store. it comes up cannot connect to itunes store. apple caused this problem with ios 6 they should tell us how to sort the bugs

    After installing ios 6 I cannot update or download apps. Ipad comes up cannot connect to itunes store.  Apple have caused so many bugs with ios 6. They should tell us how to to fix the probvlems

    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

Maybe you are looking for

  • CE function to get distinct values from Column table

    Hi All, Could you please let me know the appropriate CE function to get the distinct values from column table. IT_WORK = SELECT DISTINCT AUFNR FROM :IT_WO_DETAILS; Thank you.

  • Keyhole DRM Application has encountered  a problem and needs to close

    Every time I try to run one of the games I have downloaded from Shockwave e.g Ciao Bella I get the error message "shockwave.com Keyhole DRM Application has encountered an problem and needs to close".

  • Blue background behind some file names in finder

    Hello, I've been noticing that some of my file names have a blue background behind them, while others don't. It's not an alternating pattern either. It's very random. Most files have the blue background, while some have a while background behind the

  • Fill hiden Item from a sql-query?

    Hallo, I have a hidden item and I know which value it should get. I could query it. Is this a possible way? Does this work? There are other item on this page (filled from another report) and they already have a value and now I wanna fill this other i

  • ITunes 11.1.2 Now Playing Window Hides, Not Visible

    In iTunes 11.1.2 (the latest upgraded version to date) when I have iTunes open on my Mac (2012 Mac Mini) the 'now playing' window in grey at the top shows nothing while a song is playing. When I move my cursor to the 'dock area' below on my desktop t