Is thr SAP functionality to have 301 movement type report with supplying pl

Dear all,
Please tell me is there any standard functionality to have report on 301 movement type with supplying plant.
Please guide.
Regards,

Hi,
Goto SPRO > MM > Inventory Management and Physical Inventory > Reporting > Define Field Selection for Material Document List > Here add field MSEG-UMWRK for program RM07DOCS and mark "Selection" and "output" both.
And check in MB51 Report, you will get Plant (WERK - Supplying Plant) and Receiving Plant (UMWRK) both fields available.

Similar Messages

Replace 601 movement with 301 movement type in outbound Delivery

Hello All,
We are using SAP - 4.6 C system.
We have a requirement to create a customer outbound delivery for a corresponding customer Scheduling Agreement but postings should be similar to 301 movement type against 601 movement
When we use 601 movement type - Material Document and corresponding Accounting Documents are created.
We do not want Material Document and corresponding Accounting Documents and at the same time should not use TSA / STO functionality
We want to use only Sales Outbound delivey fucntionality only with 301 postings.
So we tried to use 301 movement type to post an outbound Delivery and below is the error. Please advise a solution to fix this error. or an alternative approach to create an out bound delivery which should not post to an accounting document.
Error -
Update control of movement type incorrect (entry 301 X X _ L _ V)
Message no. M7 226
Diagnosis
The system could not find entry 301 X X _ L _ V in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
u2022 For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
u2022 For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.
Regards,
Siva

Hello all, Jurgen,
Thanks for your responses.
Today, we use 601 movement type for Outbound delivery which creates Material Document and Accounting Documents.
Instead of this, we would like to replace 601 with 301 movement as this has simple plant to plant transfer postings in one of our specific scenario.
We are getting below error when we do Post goods Issue on Outoubnd delivery: we just replaced SD: Schedule line category movement to 301.
Update control of movement type incorrect (entry 301 X X _ L _ V)
Message no. M7 226
Diagnosis
The system could not find entry 301 X X _ L _ V in any of the movement type control tables
Is this the correct approach? Even if we try to create new custom movement ref to 301 to fulfill 301 X X _ L _ V.
Will this work? I am sure in addition to this we need some user exit development.
Presently, this is SD Outbound delivery cycle and will continue with same approach.
we also have our regular scenarios which work with 601. This is one of our exception business cases where we need affects similar to 301.
For above case we can not use STO/TSA with some master data changes as we have already have same plants set-up for regular STO/TSA processes.
The above requirement is special case in one of the business cases.
Thanks
Siva

What happened to the option to see all your purchased movies alphabetically? I can only see recent purchases and then I have to look by movie type. With over 500 movies purchased this is a huge pain.

What happened to the option to see all your purchased movies alphabetically? I can only see recent purchases and then I have to look by movie type. With over 500 movies purchased, this is a huge pain. For instance the movie Airport 77 is classified as Drama not action? But it is action? I have to look at both types to find the film. I will stop buying films via AppleTV if this is the way it is going to stay. I am not searching for films in this crazy manner.

Same issue here. Might have to do with size of library. I too have over 300 purchased movies. "ALL PURCHASED" folder disappeared yesterday on all my AppleTV's. My son only has 20+ purchased movies and his still shows "ALL" folder. However, I had him log in under my account and "ALL" folder is missing??? I hope Apple gets this resolved quickly. I too do not want to flip through various Genres looking for movies.

Movement Types associated with Transactions WAE01 and WAM01

Hello,
What is the best way to find Movement Types associated with transactions WAE01/02 and WAM01/02?
Thanks,
Shweta

Hi Shweta,
Pls refer below links may be use full to you!!!!!
[http://www.sapwm.com/posting_changes.asp]
The is one book also i have seen on SAP press related to it named "SAP Warehouse Management: Functionality and Technical Configuration " by Martin Murray.
[http://www.sap-press.de/katalog/buecher/inhaltsverzeichnis/gp/titelID-1449]
Hope will be useful to you!!!!!!!!!!!!!
Regards,
Shyamal

Movement type for production supply missing in warehouse

Gurus,
I am getting this error when i use TC-LP11
movement type for production supply missing in warehouse
What should be done?

All I can suggest is checking the master data:
Must have at least one Prod. Supply Area and one control cycle set up.
PSAs are part of the WM-PP interface and are created in WM and are used to group together Work Centres (which are Production master data).
Created under application menu:
Logistics/LE/Master data/Warehouse/Production Supply (Tx LPK1/2/3 see also LS41) and assigned to Work Centres under application menu:
Logistics/Production/Master data/Work centres/Work centre/Change (Basic data view).
(To find out the PSA aka Supply Area from Process Order Display Tx select: Goto \ List \ WM Picklist and scroll to right)
A Control Cycle defines for a given material, Plant and PSA:
which WHS to get the material from
which interim storage type to take it to
which bin to place it in (can be dynamic for pick parts)
Logistics/LE/WM
Master data/Control cycle record/Create
Regards,
Nick

My current os x is 10.9.5, using final cut express vers. 4.0.1. I have imported .mov clips created with a older mac os x (lion) and converted them to import into fce. after doing this as well as putting clips on the fce timeline when playing back t.h

My current os x is 10.9.5, using final cut express vers. 4.0.1. I have imported .mov clips created on a older mac os x (lion) and when I wanted to import them into fce, a quicktime conversion window opened up and converted them (I haven't experienced this in the past). I then imported the converted quicktime clips into my fce project. After doing this I took selected clips and put those edited clips on the fce timeline. When playing the video back in the fce timeline,I noticed
1) the video wasn't playing back smoothly like the original content
2) when looking at the timecode reading of the timeline, the timecode was sputtering as well as the video and audio. I exported to quicktime just to see if that was consistent, it was.
When I play the converted quicktime content independently of fce, it plays normally (no sputtering of timecode, video and audio. Need help to resolve the sputtering playback of converted video content in the fce timeline. I've never experienced this before. Any suggestions?

When you say you converted the clips before importing them into FCE, did you convert to AIC or DV and do the converted clips match your FCE Sequence settings exactly? If not, go back and convert the original files again, using the intended Sequence settings as a guide.
-DH

Excise Capturing at 301 Movement type

Hi All
Is it possible to capture and post the excise invoice for movement type 301.
if yes then plz give me in deatil
Thanx..Trupti

hi
maintain following settings
Go to SPRO - IMG - Logistics General - Tax on Goods Movement - India - Account Determination - Assign G/L account for Excise transactions.
EWPO      Credit                 CENVAT clearing account
EWPO        Debit                   RG 23 AED account
EWPO        Debit               RG 23 BED account
EWPO         Debit              RG 23 ECS Account
EWPO         Debit               RG 23 NCCD Account
EWPO         Debit               RG 23 SED account
EWPO 10     Credit              CENVAT clearing account
EWPO 10      Debit                   RG 23 AED account
EWPO 10        Debit              RG 23 BED account
EWPO 10        Debit               RG 23 ECS Account
EWPO 10          Debit              RG 23 NCCD Account
EWPO 10           Debit               RG 23 SED account
J1IEX
regards
kunal

Reverse mov. type report

Hi all,
My req. is like this we have 6 plants, with in given period need all reverse mov. type postings report for all plants,is there any standard report for this.pls help me for this.
Regards,
phani.

In MBSM
You can get
The report Cancelled material documents issues a list with the following data:
material documents with the associated reversal documents "or" reversal documents with the associated material documents
MB51 : Material Document List
This report provides you with a list of the material documents which were posted for one or more materials. You can display a material document from the output list.

Movement type linkage with Register updation

Hi all,
I would like to know which is the customisation that prompts the system to update the movement types to appropriate registers especially 601.
Is it in:
'Specify Which Movement Types Involve Excise Invoices' under Tax on Goods Movement.
But it describes that the customisation is for Input movements.
Regards,
Karthik

Hello Sarhan,
My question is not how to assign Movement Type to Schedule line Category which flows into the Delivery document.
It is how do we corelate the Movement type for Goods Issue with the corresponding Excise Register updation.
Regards,
Karthik.

Does anyone have a report using cfdocument that produces a ledger type report with column headings?

I need to see some sample source code of a report with column headings and detail data. I can't get my column titles in the header to line up with the detail no matter what I do. Can anyone spare me a good sample?
I have tried to use tables to specify both col headings and detail, but no chance to get them to line up. There has to be a way. I can't use the report builder because I need more control of when page breaks print, what data is on each line, etc. Hopefully some kind soul out there has a good sample.
Thanks!
Dave

Your MBP is actually a mid-2010, not a 2008. That's what the 6,2 model indicates.There's an issue with the graphics module on that machine. There was a program in place to replace the motherboard within 3 years of purchase, but you're probably outside of that. Some folks have supposedly gotten theirs changed outside of that period, so you can try.
http://support.apple.com/kb/TS4088?viewlocale=en_US&locale=en_US
What you can do to use it is download gfxstatus from http:gfx.io and force the graphics to Intel. That would affect your work with Final Cut, but at least you might be able to use the machine.

Movement type for customer supplied packing material returns

Hi,
The scenario is like this,customer will give the packing material to the company.Company does the service required & return that packing material to customer.Presently we are using 624V movement type can you suggest some other movement type for this.
Regards,
Rajesh

hi,
this is to inform you that,
if customer is supplying the packaging material to us receive it through 501 - M and Issue 502 - M, manually if you want to track the packing material wise take the material into NON VALUATED ITEM.
you can create a Z report for the same and the fields in that is,
material number, packing material associated with that, quantity received thru 501 - M and consumed against 502 - M and GI quantity.
balajia

BAPI for Goods Issue (MIGO) movement type 351 with reference to PO

Hi,
Is there an BAPI for Goods issue in MIGO with reference to PO movement type 351, i tried using "BAPI_GOODSMVT_CREATE", but there is no PO field in this, is there any other BAPI's available for the same?
Thanks in Advance,
Santosh

for goods mvt type , the available is that itself . for 351 mvt type Po number is not required .
if its a must , create a Z bapi with additional field for PO and make it as reference .

I have a movie streaming problem with my 2nd generation Airport Extreme

I am using a second generation airport extreme and I am having trouble streaming movies/tv. I did not have a problem using a new airport extreme.
Any ideas?

This was solved by buying an Apple Airport Base Station.

Function modules for Goods Movement Types 501 and 502

Hi,
Is there any function modules to do Goods issues and Goods receipts without PO (501 & 052).
Thanks in Advance.
Eswar

Hi,
Check BAPI_GOODSMVT_CREATE
Thanks & Regards,
Navneeth K.

Movement type report

Hello,
I need to know the report / transaction which shown that 1) Material 2) movement occured (mvt type)in last month year etc.
3) ID who did movements.
Thanks
Himanshhu

Hello Himanshu,
If you want to get this for a particular material, you can get this in MMBE transcation itself.
Go to MMBE>>Enter material and plant>> Now go to Environment data >>Select material movement and see the movement happen for that particular material, with material document and date details.
By double clicking on material document number you can get the ID who has done this movement.
Also you can use transcation MB51
Br,
Tushar

Is thr SAP functionality to have 301 movement type report with supplying pl

Similar Messages

Maybe you are looking for