Is Tiger to Leopard a free upgrade?

Do you upgrade to Leopard from Tiger or buy it. Are their two versions upgrade and full install?

I am really getting tired of this. I couldn't even talk to support over this issue because Apple wanted to me to purchase an extended warranty to talk to support because my MacMini warranty expired. Rules are rules sorta thing. Obviously Jobs is turning into Gates. Apple's FAQ implies without an upgrade to Leopard, my Tiger OS would quit working, FAQ also seems to say BootCamp Beta expired on Tiger would prevent me from booting back into Win. I don't think I need to go into any details of which devil I may have to switch to. These rules are lies without a support department, which as of 08, seems to no longer answer simple yes / no questions without a credit card.

Similar Messages

  • Is Leopard a free upgrade to Tiger?

    Hi. I'm coming from the Windows world and would be moving semi-full time to Mac OS X. I'm just wondering if the Leopard release is a free upgrade to Tiger or is it a completely new upgrade similar to going from Windows XP to Vista.

    Apple does not sell upgrade version of OS X (withthe exception of OS 10.1). They only sell full retail versions, so far all for $129 (academic price $69). Typically, if you purchase your Mac after the new version is released, but before Macs begin shipping with the new version installed, you get an upgrade disk dropped in the box for free. Apple will probably continue to do the same when Leopard is released.

  • Upgrade from tiger to leopard on a power mac G?

    can i upgrade from tiger to leopard on a power mac G5?

    Yes, however, read about the pitfalls below.
    Mac OS X 10.5 was release October 26, 2007.  Its 10.5.8 update is the newest operating system available for PowerPC Macs that meet its requirements.  It is available occasionally by calling Apple online store's phone number, even though the website does not show it.  Many want to upgrade to Leopard because of i-Devices (iPhone, iPad, iPod) bought saying iTunes 10 or later is recommended.  To check if that really is required, look at the i-Device requirements section of this tip
    If your Mac is Intel, and running 10.4.11 or earlier, and meets the hardware requirements of 10.6, a less expensive upgrade solution is to upgrade to 10.6 directly.  No need to upgrade to 10.5 unless your software won't run in 10.6.
    Software listed for Intel Mac and PowerPC Macs can run on 10.5 for the platform indicated in the link. For Leopard you need
    867 Mhz on a single processor or faster (1 Ghz and higher are faster).
    256 MB of RAM (preferably 512MB of more based on arbitrary experience).
    9 GB of hard disk space (arbitrary experience adds another 15%) free.
    Macs newer than August 28, 2009 can't run Leopard, and require a minimum of Snow Leopard.
    Dual booting Mac OS 9 and Mac OS X 10.5, check this tip:https://discussions.apple.com/docs/DOC-1757
    Classic is not compatible with 10.5.  10.4.11 on a PowerPC Mac or earlier is needed for Classic.
    Mac OS X 10.5 is the earliest version of Mac OS X that will run iTunes 10.  This is necessary for numerous i-Devices (iPad, iPhone, and iPods).  To find out which require it, see this article
    http://en.wikipedia.org/wiki/ITunes_version_history
    Should you require only iTunes 9, and are running a minimum of 10.4, backup your data at least twice, check in Apple menu -> About This Mac if you have a G3, G4, G5 (which is PowerPC), or Intel Core (which is Intel) make sure you are running 10.4.11 PowerPC or 10.4.11 Intel (depending on the aforementioned processors), and download iTunes 9.2.1.  The only reason you should upgrade to 10.5 is if some other software is required.
    Boot Camp is only available on Intel Macs with 10.5 and higher.
    Time Machine backup software first appeared in 10.5
    You have several options of installation which are explained here: https://discussions.apple.com/docs/DOC-2209
    All of which I recommend you backup your data at least twice before upgrading, and have sufficient disk space to install, and all your third party applications and drivers are known to be Leopard compatible, and after backing up your data you dismount and disconnect all but Apple keyboard and mouse and if there is an external display, that too. And just before you install repair permissions.
    If any of the above terms confuse you, ask on the Discussions board what they mean, and one of the people who knows will gladly assist you.
    You must use the installer disc that looks like *, and does not say Upgrade, Dropin, or OEM, if you choose to upgrade to Leopard.
    Message was edited by: a brody

  • Buy new mac w/free upgrade to Leopard?

    Hello,
    I know this is a long shot but if I buy a new Mac now is there any possibility that Apple will do a free upgrade to Leopard when it comes out? I know that Microsoft does this with it's operating system when you buy a computer nearing the date of the new OS arrival.
    Thanks,
    David

    David, in the past Apple has offered a reduced upgrade to a new OS when you've bought a new Mac within a short window of time prior to the announcement. For example, Tiger's release was announced 25 days after I bought my PowerBook so I wound up getting a Tiger upgrade for $20 if I remember correctly.
    But there's no guarantee Apple will do that with Leopard and, of course, we don't know when Apple will announce Leopard. My standard answer is always this: If you need the computer now, buy it. Waiting is a fool's game, you can always find a reason to delay your purchase. I had a friend who kept finding a reason to wait another month and that went on for 6 years!

  • Upgrade tiger to leopard

    Hello,
    I just bought a new imac with tiger and I am wondering if apple will upgrade to leopard for free. If I had known that they come now I would have waited. Anyone knows the policy of apple in this regard
    thanks
    sigi

    In the past, people who bought Macs between the date of the announce of the new OS release date, and the actual release date, have been eligible for a free or low-cost upgrade. So if that continues, it looks like you bought your new Mac a little to early to qualify. Moreover, Apple is under no obligation to continue the old free upgrade policy at all.

  • Upgrading from Tiger to Leopard on a G5 Dual processor early 2004 version

    I am about to upgrade my OS from Tiger (10.4.11) to the newest version of Leopard on my Dual G5 PPC. I have an ATI Radeon X800 XT video card as well as a third party PCI firewire card added. 3.5G of RAM.
    Should I expect any bumps or issues when upgrading? Also, will my system perform the same, slower or faster after install?
    I am a heavy user of Aperture, Photoshop as well as Final Cut Express. I will be installing the newest version of Fotomagico once 10.5 is set up.
    Any advice is greatly appreciated.
    Pete

    You should verify that all your critical software can run under Leopard or that there are upgrades available. Check with which version of Leopard the software is known to be compatible, and don't install a later version of Leopard.
    Otherwise I suggest reading this:
    Essential Steps Before Updating OS X!
    Please do things right before updating OS X in order to avoid problems.
    A. Repair Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Clone Using Restore Option of Disk Utility
    1. Open Disk Utility from the Utilities folder.
    2. Select the destination volume from the left side list.
    3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
    4. Click on the Restore tab in the DU main window.
    5. Select the destination volume from the left side list and drag it to the Destination entry field.
    6. Select the source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    Destination means your backup drive (should be erased first.)
    Source means your startup drive or volume.
    C. If you are installing a new version of OS X such as upgrading from 10.4.x to 10.5.x, then I suggest you do the following:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.
    D. Download the Standalone Combo Updater from Apple.
    Be sure you quit all running applications and disconnect all peripherals (except original keyboard and mouse) before running the installer. When the installer is running do not use the computer in any way other than to respond to an installer dialog.
    Install the update by double-clicking on the installer package icon. When the installation is completed Restart the computer. Your computer will boot twice - this is normal. Upon completion of the update use Disk Utility to repair permissions. Not all permissions will seem repaired. You will get spurious reports regarding permissions related to iTunes, Front Row. These can be ignored. They will appear every time you repair permissions.
    Following these basic steps should prevent most if not all updating problems. Note that if you have unrepairable disk problems reported in Step A then DO NOT update your system until those problems are resolved.

  • Upgrading from Tiger to Leopard on and external (FireWire) drive...

    Hi all,
    I'm pretty sure this has been discussed somewhere on the www but after several hours of research, I'm embarrassed to admit I'm ready to call it quits (unless someone more tech savvy than I can help <:o)
    I've been running my OS on a WD 500GB FireWire for the past couple of years. Switched to it shortly after realizing that the 80GB HD on my MacBook was insufficient for my needs.
    Now I'm getting ready to upgrade from Tiger to Leopard and I've got some issues. Most importantly, when I launch the installer and it requires me to restart my system, I do so through both methods (holding down the "option" key to start up using the external HD and also by just allowing a normal boot under the old drive). In neither situation do I ever get the option to select where I'd like to install the new OS. In fact, when I allow the normal start without the "option" key being pressed, I don't even get to see the option to begin an installation. When I hold down the "option" key, I get the Mac OS X Install DVD screen (directory on the DVD), but it never gets to the point where I can start the installation.
    I'm at a loss and getting a little frustrated (which has been my problem since I started with Macs--been a long time PC user and I'm always looking for the difficult way of doing things--so I'm probably just being PC-stupid as usual >;o)
    Any assistance with getting me on the path to continued righteousness would be greatly appreciated. Thanks very much in advance!
    Ali T. Borahan
    http://www.alisails.com
    PS: Despite the fact that I'm PC-literate and Mac-stupid, I've managed to convince almost a dozen people to switch to Mac, simply because I'm hooked and love how the Mac community sticks together and helps one another (and also because I can't stand the Microsoft kingdom!!! <:o)

    Insert the Leopard DVD in the optical drive and restart the computer. After the chime press and hold down the "C" key until the dark gray Apple logo appears on the screen. After the installer loads select your language and click on the Continue button.
    When the menubar appears select Disk Utility from the Utilities menu. After DU loads select your startup drive's entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Continue with the installation process until you reach the point where you must select a Target drive. Select your Target drive then click on the Options button in the lower left corner of the dialog.
    Select the Archive and Install option.
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    Your target drive must have repaired OK when you repaired it. Otherwise do not continue.
    You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Client Upgraded from Tiger to Leopard Can No Longer Connect to Tiger Server

    I just finished upgrading a G5 2GHz DP Powermac from Tiger to Leopard. This was an Archive and Install upgrade with importing the old settings. After verifying the account migration, including .Mac connectivity, and fixing all 3rd party software compatibilities/upgrades, I tried to connect to our Tiger 4.11 server by clicking on the server's Icon in the Shared section of the Finder Sidebar. The finder then switches to browse the the server for shares: "Connecting..." is displayed under the tool bar, with a "Share Screen..." and "Connect As..." buttons to the right.
    At this point the "Connecting..." remains displayed with the spinning circle in the bottom right of the Finder window.... spinning. This situation continues for several minutes until is seems the system gives up.
    If I click on the Path button on the Tool Bar, and go up to the Shared level, ALL the Shares on the Network are displayed, including all the Tiger Client machine shares. I can click on the triangle beside the Tiger Client's icon, and all the drives and home directories on the Mac are listed. All the client shares can be accessed without any issues. NOTE: There are no other Leopard clients on the LAN.
    Prior to the Leopard upgrade, this client could connect to the Tiger server as well. All the other clients on the LAN can access the Tiger server also.
    On the Leopard client I have tried clicking and the "Connect As..." button and using the menu "Connect to Server" and specifying the server's IP, and I get the same "Connecting..." message with a "non-connecting" result.
    I can only assume that somehow the Account Name and password are not being passed correctly. But, using "Connect As..." should resolve that. However, "Connect As..." does not give me a user/password window!
    If I check the AFP Access log on the Server, the only messages displayed are "Mounted Volume..." No messages in the error log, and no messages in the "Connections" section.
    Can anyone help me figure out why the Leopard client can not connect to the Tiger Server?
    My apologies if the description of my problem is a bit disjointed. I have been thrown into server admin and am learning "Trial by Fire".
    Any help or suggestions on how to resolve this issue will be greatly appreciated.
    Thanks
    Gary
    Message was edited by: Gary Sumlak

    OK. A quick update.
    After waiting for about 10 minutes for the rotating circle in the bottom right corner to stop, I was able to click on the "Connect As..." button. It took another 10 minutes, but the Connect As window eventual popped up. I entered the Userid and Password (saving to Keychain) and was able to see all the sharepoints on the the server. I browsed all the connected drives and folders without issue.
    I then disconnected from the server. Reviewing the AFP logs on the server shows messages for the connection Login and Logout.
    I then tried to reconnect to the server, and again another 10 minutes wait, although this time the Leopard client eventually connected automatically with the proper User, as per the AFP logs confirms.
    Although, the client can now connect to the server, for it to take 10 minutes will be unacceptable to management, not to mention the end user. Tiger clients can connect in a couple seconds!
    Is there a way to reduce the Leopard login time to, say, a couple seconds, like it does with the Tiger clients?
    Again, any help or suggestions would be greatly appreciated.
    Thanks
    Gary

  • Mail no longer working after upgrade Tiger to Leopard

    I know that there are some reports out there on the Internet but I can not find a solution that I trust. i upgraded from Tiger to Leopard and ever since my Mail program has completely disappeared. it is no longer in the dock, it is no longer in the applications folder and I went into the Mac Harddrive and found i. I dragged the icon on the dock and when I now start Mail the bar on top of the screen shows me that it started, but no windows come up. Under File most options are grey. i can see that all my mailboxsettings are still there. I have Entorage 2004 as my default mailprogram, but that gave never problems in the past and I use Mail for my google account. Under View in the menu almost everything is grey.
    can someone help please? thanks so much.

    In addition the article cited, if you ran 10.3 or earlier prior to upgrading to Tiger, once-upon-a-time, you might also need to remove two files with MessageSorting in their names.
    Ernie

  • I have recently upgraded my iBookG4 from Tiger to Leopard 10.5.8 and find my Bluetooth USB adaptor no longer connects. The Bluetooth pane says inactive. Does Leopard require  USB 2.0. I've had the adaptor for some time so may be USB 1.0

    I have recently upgraded my iBookG4 from Tiger to Leopard 10.5.8 and find my Bluetooth USB adaptor no longer connects. The Bluetooth pane says inactive. Does Leopard require  USB 2.0. I've had the adaptor for some time so may be USB 1.0

    Bluetooth icon on menu bar shows bluetooth off. When opening bluetooth preferences it shows the devices I've connected previously,( my mobile phone), and other devices I've attempted to connect but not very successfully: my iPhone and MiniMac.  The bluetooth dongle in the USB port shows a continual blue light but does not react and the iBook does not recognise that it is there. There is absolutely no reaction when I try to pair my mobile phone, which I've done successfully before upgrading to Leopard, either by the iBook or the mobile phone.
    I assumed that Tiger was not bluetooth compatible with the iPhone or MacMini running SnowLeopard and hoped by upgrading to Leopard I could achieve some file transfers between the three devices (iBook, iPhone and MacMini)

  • I upgraded my iBook G4 from 384MBytes to 640Mbytes and upgraded from Tiger to Leopard. After a few weeks the HDD failed. New Leopard install reports: "insufficient memory". I need Tiger install disks so I can install

    I upgraded my iBook G4 from 384MBytes to 640Mbytes and upgraded from Tiger to Leopard.
    After a few weeks the HDD failed. I bought a new disk, installed it and trued to install Leopard, but the  install fails reporting "insufficient memory".
    I assume the installation requires more memory than the OS actually needs to be able to run.
    I need Tiger install CD/DVD so I can install Tiger first and then upgrade to Leopard.

    Call Apple Customer Support 1-800-767-2775, provide the Serial Number and specifications of the Mac, and for a reasonable fee, they will supply a replacement set of system discs (if available).
    The discs will be for the original version of the OS that was pre-installed when the Mac was manufactured.
    You need much more RAM than that.
    Leopard system requirements:
    http://support.apple.com/kb/SP517

  • Spotlight problem after Tiger to Leopard Upgrade

    Since I upgraded my Macbook Pro 15" from Tiger to Leopard, Spotlight never worked. Initially I didn't mind too much but now I want to get it work.
    I tried all suggestions I found in this forum (see list below) to no avail.
    It seems Mac OS cannot index the system disk.
    Any Terminal command like mdutil or mdimport have no effect and return no info. As a check, I ran the same utilities on my iMac (same Leopard version, but native) and they do in fact work as expected, as well as Spotlight. Another example: mdfind works on my iMac but return nothing on my MBP.
    If I try the regular way, when I write my search string in the Spotlight window I just get nothing on my MBP.
    I tried the OnyX features for Spotlight:
    - Maintenance/Rebuild/Spotlight Index seems to do something, but in fact it does nothing useful
    - Parameters/Spotlight/Options: Enable Indexing the Startup-Disk makes an attempt to enable it and switches immediately back to disabled. No way to keep the option checked. Also removed the Font cache from OnyX as suggested in some post - null.
    Some attempts I made:
    - used Disk Utility to check the disk (no repair needed)
    - used Disk Utility to repair permissions: there are many that are always repaired... this makes me feel the problem might in fact be in the permission area. But after many repair the result is always null.
    - added the start-up disk to the Privacy area in Spotlight Prefs, and later on removed - null
    - trashed com.apple.spotlight.plist pref user prefs - a new one was created but no effect
    - removed /.Spotlight-V100 from terminal - a new one was created but no effect
    - used mdutil -E and -i on and off - I always get the message "/: Indexing and searching disabled"
    - mdimport -L or -A or -X return nothing (on my iMac they return the list of plugins, schema etc.)
    - rebooted many times also in safe mode - null
    - the problem exists also for the other user on the same MBP
    - tried OnyX as described above.
    No effect!!
    Now my question is: what can I try next ?
    I'm sure there is some parameter somewhere (some .plist ?) that can re-enable Spotlight. But which one and where ?
    Thanks in advance
    Piero

    Take a look at Spotless
    http://www.fixamac.net/software/spot2/index.php
    It deals mainly with Spotlight indexes, but it also contains some diagnostics - its description includes the following:
    Spotless will automatically find and delete the "mds-crash-state" file from selected volumes. The file may be created if the Metadata Server crashed or was unexpectedly closed during the indexing process. The presence of this file can prevent Spotlight from indexing the volume in the future.
    Spotless allows you to see exact size of the index directory on each volume.
    Spotless also includes an on/off switch for Spotlight.
    ------------------

  • Do I need to backup my files when upgrading from tiger to leopard?

    Not sure if I need to backup all my files before upgrading from Tiger to Leopard (to use a Mac Box Set), have bought a Seagate 1TB FreeAgent GoFlex Home hard drive to back up on. Was told I wouldn't need a WiFi router but have now discovered I would need a dual Ethernet port to be connected to the internet and the hard drive which my Mac mini only has access for one, either the internet or the hard drive. So I ask do I really need to back up before upgrading? or can you get dual Ethernet ports?

    Only if your data has any value to you.
    If everything works perfectly, you should lose nothing.
    If anything goes wrong, it is possible to lose data.
    Personally I don't want to trust my data to everything working perfectly so I back it up.
    As to the question of dual ethernet ports, you don't need them actually. If you create a LAN with a router then the multiple ports on your router will allow you to connect to both the internet and disk at once.
    Allam

  • Hi there,i have a powerbook G4 1GB,cpu speed 1.5 ghz,512KB,running panther 10.3.3.Could this be upgraded to tiger or leopard?thank you

    Hi
    I have a powerbook g4
    1.5 ghz powerpc g4
    1 gb ddr
    512 kb
    Is running panther 10.3.3
    Could this be upgraded to tiger or leopard
    Thank you

    Leopard system requirements:
    http://support.apple.com/kb/SP517
    Leopard is no longer available from Apple. You need to look for a black retail install disk on eBay or Amazon, which will cost you around $200.

  • Just upgraded Tiger to Leopard.  Clarisworks not supported.   I can successfully convert CW4.0 doc's to AW6.0 doc's using MacLink Plus Deluxe but the problem is I than cannot print them or convert to PDF, either.

    Just upgraded Tiger to Leopard.  Clarisworks not supported.   I can successfully convert CW4.0 doc's to AW6.0 doc's using MacLink Plus Deluxe and then work on them but the problem is that I cannot print them.  Neither can I convert to PDF.

    If I was trying to get someone else to do my work,
    I wouldn't be posting this saying what I have said
    would I? I'm not unwilling to do the work myself.From what was stated in your OP, it seemed that you
    were.I'm sorry if it seemed that way. I don't want something for nothing. I've spent MANY hours, which I don't have, trying to work this out. I have hit a point where I don't think my expertise is going to solve the problem. That's why I've turned to some experts who might say something along the lines of, "Hey, I know what that is...you're compiling against... and on the Unix box, it's compiling against..." I was NOT looking for something like, "See the code below that fixes your problem."
    The only problem is that I don't have direct access
    to the sun unix machines I'm running the app on,
    so I can't run a profiler on it. Ah, okay. So the only knowledge you have of how it
    performs on those machines is from your instructor
    running it and then telling you how long it took?No. I can SSH into the servers and run the program from a command line. But I wouldn't be able to install any profiler programs.
    You could ask your prof to run it with -Xprof or
    -Xhprof or whatever. Or you could put in a bunch of
    timing statements to get a rough idea of which parts
    are making it take that extra 39 minute or whatever.is -Xprof a java command line option? If so, I will look into doing that. Maybe it's available on the machines at school. Thanks for that input.

Maybe you are looking for