ISA and Business On Behalf

hi
we are trying to activate scenario business on behalf.
we have made the correspondind settings in shopadmin and CRM,
but when we try to log on to our Internet BOB shop we receive an error
that the shop does not exists.
We cannot find the BOB shop to the main page of our B2B.

Hello ,
As I know there is a special sales order type in CRM which is called ISBR Order On Behalf.
The scenario which you define in shopadmin must me B2B scenario and you have to
Specify ISBR as the order which this Webshop uses.
It is up to you to use the same product catalog with a different variant or a completely new product Catalog.
After that you have to specify in XCM application that this is a Business On Behalf Scenatio.
Best Regards
George.

Similar Messages

Business Package for ISA and Oppurtunity Management

Dear Portal Gurus,
We need to implement ISA and Oppurtunity Management from inside EP.
Pls let me know which Business packages might be useful.
Thanks much.
Josh.

If u have correctly deployed Business package using JSPM means it wil show defeintely show in PCD
goto content admin -- portal content -- content provided by sap -- specalist -- here u can see ur BP
and also see SAP Note:731386
Regards
Krishna.

Looking into starting a business using creative cloud and business catalyst

Hi,
I am just looking for a bit of clarification on a few things. I am looking at using Creative cloud and Business Catalyst for a new business.
Firstly, if I have both a Mac and a PC, will one creative cloud subscription allow me to install on both?
Secondly, with Business Catalyst if I am wanting to make more than 5 websites, do I have to use the partner plan? or is this just if I want to make comission? Basically can I pay individually for subscriptions to more than 5 sites on behalf of customers without paying the initial partner fee while I am starting up? Obviously long term the partner option makes sense but short term for start up it would be useful to just sell the adobe subscriptions without earning comission. Hope this makes sense?
Any help would be much appreciated.
Thanks
Adam

Hi Adam,
I'm very happy to hear that you want to start a business using BC and Creative Cloud - this is one of the goals of our integration.
To you first question, yes, you can install Creative Cloud on both your machines.
To your second question - you don't need to be a paid partner while you're starting up. You can remain a free partner, and just buy supplemental websites from the Partner portal. You're right, you won't get the comission, but it's a pretty good deal anyway.
If you're starting up, I also strongly recomment the BCGurus "Zero to BC Hero" training program - not only they explain you the BC product, but they also include a lot of great business insights on running a web agency
Sincerely,
Alexandru

Business on behalf (BOB)

Hi SDN,
I want to set up a business on behalf scenario, but i couldn't find any documentations about it. Where can i find it?
I found the settings in the XCM-Konfiguration. The eShop is opening with the extensions for business on behalf, thats working.
I found the settings for SAP R/3 too (Note 1119653). But i found nowhere how to create a eshop user for an agent? If i set the reference of the shop-user to the creditor, that is not working. How to do it???
Thanks and best regards,
Toni

I've solved the problem. The type of the new partner role has to be customer. We had an other type of partner first, therefore it worked not.

Lync and Office 2013 Home and Business 'Present PowerPoint' not working

Hello All,
We have an Exchange online E1 plan that includes Lync, that we have been using without problems for the last year or so.
The 'Present PowerPoint' functionality of Lync is very useful, and again it has been working without fault until now. However, for one user who we have upgraded to Office 2013 Home and Business (from Office 2010), it no longer works when she clicks on
present, select PowerPoint and select a .pptx file. She gets the following error message...
'the presentatio.ppx couldn't be converted for presentation because Visual Basic for Applications (VBA) is not installed on this computer. Please install VBA and try again.'
The thing is it seems that Visual Basic for Applications is installed as a part of the Lync Basic Install. I re-installed Lync just in case, and when I clicked customize I ensured that Visual Basic for Applications was checked to install as run from the
computer.
In searching online I can see plenty of other people suggesting with Office 2010 to repair the Office install, and select customize and make sure the Visual Basic for Applications is checked to install too. However, with Office 2013 Home and Business
you don't get this option - it seems all or nothing. I have tried repairing both installs, re-installing etc with no luck
So is it that Office 2013 Home and Business incompatible with Lync or can anyone help or throw some ideas at me?
Thanks,
Andrew.

Here a few who also experienced the same issue
https://social.technet.microsoft.com/Forums/lync/en-US/3cf4f93e-3e98-4a72-aa6a-83e92408837c/message-error-visual-basic-for-applications-vba-is-not-installed-office-home-business-2013-?forum=ocsclients
https://social.technet.microsoft.com/Forums/en-US/f336fc74-c821-4473-b9d9-df62267a3180/lync-2013-and-office-web-apps-powerpoint-presentation-sharing-missing-vba?forum=lyncconferencing
http://community.office365.com/en-us/f/166/t/123920.aspx
http://answers.microsoft.com/en-us/office/forum/office_365hp-powerpoint/lync-2013-and-office-web-apps-powerpoint/71abcef9-0b6b-4fe1-944e-789b53da3f1e
The suggestion since there is not direct solution as of today would be either roll back the office 2010 since we know this work
On upgrade to Office 2013 Pro use the full Lync Client
PLEASE REMEMBER, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answered"

Office 2013 Home and Business

I have installed multiple copies of Microsoft office 2013 home and business over the last 3 months with no issues but now when I go to office.com/setup to install another copy on a different computer it comes up and ask for the product key which I enter.
then it takes me to the Microsoft account login screen, and after I log in I get buttons to install but the buttons represent previous copies I have already installed. if I download one of these copies it install but wont activate the normal way.
Is there a limit on the amount of copies that can setup under 1 account? or any help would be appreciated

Hi Andrew,
As far as I know, Office Home & Business 2013 is an One-time purchase version of Office for a single PC. (More reference:
http://products.office.com/en-us/buy/compare-microsoft-office-products)
So with one license of Office Home & Business 2013, you can only install Office on one PC. How many licenses of Office Home & Business 2013 are associated with your Microsoft account?
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Reinstalling Microsoft Office Home and Business 2010 - OS 64 bit Windows 7 Home Premium on Dell Inspiron

To start at the begining....no, that's not fair, that goes all the way back to March 24th!
My hard drive has been wiped clean twice now...First time was not by MY choice...the guy from India just talked me through it, with no warning of what was going to be the result. What a nightmare!
This 2nd time when I have "retrieved" my files from my external hard drive...my documents are there....just can't open them!
Following messages when opening Word or Outlook:
"Please wait...."etc. "Configuration in Progress Microsoft Office Home and Business".... which takes forever!
Then:
"Your AutoCorrect file: c:\users\Tosi\AppData\Roaming\Microsoft\Office\MSO1033.acl, could not be saved. the file may be read only, or you man not have permission to modify the file."
Then:
"Word cannot open existing file (Normal)
In tyring to open Outlook...
Big Red cirlce with an X in it: Could not install the custom actions. The form Cache file c:\users\Tosi\AppData\Local\Microsoft\Forms\FRMCACHE>DAT is not valid. Contact your administrator.
The same message as Word "Your AutoCorrcet....etc....MSO1033.acl ...etc. "
I have tried to change permissions...no luck. How to I get FULL control over my own computer? Please!
When I do finally get Outlook open, nothing is in there. I looked for my Outlook Data folder and I see that my .pst data file is in 5 places, yet it is not connecting with Outlook. No mail, address or calendar are in there. (to back
track...the first time I retrieved my stuff off the hard drive everything worked)
Microsoft has promissed numerous times to assit me to resolve these problems through very lovely emails but no one has called to follow up and help me. I really need help and I am running out of patience.
Soon I will be saying "Goodbye Microsoft! Goodbye Dell! Hello Apple!"
Help please!
Thank you,
SMTosi

As per your description, seems the installation of Office have got completely corrupted. I would suggest you to completely remove Office 2010 from your computer and then reinstall it.
For how to remove/uninstall Office from your computer, I would suggest you to use Microsoft Fix It tool:
http://support.microsoft.com/kb/971179
After uninstalling Office, please restart your computer then try a reinstallation. If you don't have the Office 2010 installation source or DVD, please go to this website to get Office 2010 installation package:
http://office.microsoft.com/en-us/products/microsoft-office-2010-backup-FX101853122.aspx (you might need to provide the product key of Office 2010)
Hope this helps. Thanks a lot for your patience.
Thanks,
Ethan Hua CHN
TechNet Community Support

Logical system and business system

Hi experts, please help me with the below questions---
1) What is the diff between logical system and business system?
2)what is the difference between logical system(defined in R/3) and business system (defined in SLD) in idoc to file scenario.
3) Is it require to give the logical system name of the xi server(Which we define in idx1 port) to the 3rd party system(Application system at the FTP side) to carry out file to idoc scerario?

Hi,
Business System :
1. Business systems are logical systems, which function as senders or receivers within XI. Business systems can be SAP systems or third-party systems. Depending on the associated technical system.
2. Business Systems should be mandatory used when dealing with Idoc's and Proxies .
Business Service:
1. Business Service requires manual adding on Inbound and Outbound Interfaces, Business Systems do not.
2. Business Services are maintained across environments and so, their names cannot be changed. Business Systems names can be changed across environments by providing SLD level transport targets.
3.In the Business Services we cannot maintain the Group and Targets in SLD. For Ease in transporting your ID/Configuration objects Groups and Targets are used in SLD for Business Systems.
4.Business Service has no SLD Entries and No Assigned Products and SWCV's
Regards
Sangeetha

Business Systems and Business Service - does any difference

Hi Experts,
Could any one please guide me what is the difference between
Business Systems
and
Business Service.
Which situations we use Business Systems / Business Service.
Does it have any performance issues?
Why we are not configuring Business service in SLD?
Cheers Experts!!
Sunil

Hi Sunil,
Business System: Address a particular business system as the sender or receiver of messages.
A business system is an actual application system in a system landscape. A business system
(service) comprises information about the inbound and outbound interfaces and the software
component versions of the business system. The business system services are used when
configuring internal company processes.
Business Systems are Logical Senders or Receivers that exchange messages by using the Integration
Server and that are entered in the System Landscape Directory.
The Business Systems in the System Landscape Directory relate to a system landscape.
The Business Systems of business partners are therefore not entered in the System Landscape
Directory. To be able to address such business partners logically, use communication components in
the Integration Directory. A business system is a way of specifying a communication component in the
Integration Directory more precisely (business system component).
Business Service: Address an abstract business entity as the sender or receiver of messages.
Using a business service, you can define the technical or business subunits of the companies
involved and then assign them the relevant interfaces. The business services are used when
configuring cross-company processes.
In the PCK, the Service is of type Business Service. It represents an abstract, addressable unit.
Business services are used in cross-company processes, for example, if the parties involved have only
published their interfaces and not their system landscape, or it is only partly known.
Using a Business Service,we can define the technical or business subunits of the companies involved
and then assign them the relevant interfaces.
It is useful to use Business Services when configuring cross-company processes. Usually, the
interface descriptions of the business partners involved are made publicly available.
Also,There is already lot of thread regarding the same discussion, please see it below.
Business service or Business system??
Re: Business Service <--> Business System
Difference between Business service, Business system and Business process
Business Service vs Business System in Integration Directory.
Business Service (vs) Business System in Integration Directory.
What is the difference between Business System and Business Service?
business system and business service
Diff b/w Business service & Business System?
Regards,
Vinod.

Parties, Business Systems and Business Services

Hi guys,
I've read a lot about items in subject, but have some doubts about applying them to my scenario. I have to integrate SAP system and web service.
As far as I understand concepts, this is B2B communication, so I have to use parties. To represent SAP system I use Business System, as it's described ins SLD, and for Web service I use Business Service... just as we use business services for web services
--- Am I right here? Will it work ok in reciever determination, agreement?
Thank you.

Hi,
You are doing the usage of business systems and services in proper way.
The scenario will difinately work with combination of business system and service.
It will be fine for all other configurations such as Receiver Determination, Sender/receiver agreements and interface determination etc.
Please see below the importance of Parties, Business Systems and Business Services
A communication party
A communication party (party for short) represents a larger unit, which is involved in a collaborative process. Using a communication party, you generally address a company within a cross-company process.
You can assign a communication party one or more services to address it as the sender or receiver of messages.
A business system
If you want to address a particular business system as the sender or receiver of messages, choose this service type.
A business system is an actual application system in a system landscape. A business system (service) comprises information about the inbound and outbound interfaces and the software component versions of the business system.
You usually use business system services when configuring internal company processes.
A business service
If you want to address an abstract business entity as the sender or receiver of messages, choose this service type.
Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
You usually use business services when configuring cross-company processes. In this case, you only make your interfaces known to the business partners involved and either do not make any details about your own system landscape available, or only specific details.
For example, you can define RosettaNet Partner Interface Processes (PIPs) as business services.
Thanks
Swarup

Technical systems and Business systems in SAP XI

can any one tell me ,breifly explain the diff b/w <b>Technical Systems</b> & Business Systems?
steps to create Techincal system and Business systems?
and also Steps for creating Software Components? For Technical System we can create more than one Business systems ,what it means?can any one explain?

Hi
First I let u know with analogy and actual definition as below
Any module of SAP like MM, SRM, FICO ets makes a logical system in combination according to business requirements is a business system which is actualy hosted on an application server like ABAP AS or Java AS which is basically a technical system.
Technical systems are application systems that are installed in system landscape (a CRM server, for example). Most systems (Web AS ABAP and Web AS Java systems) automatically report information to the SLD about the elements that they contain by using the SLD data supplier programs. You need to manually register the following types of system only:
Standalone Java systems
Third-party systems
Business systems are logical senders or receivers that exchange messages by using SAP XI and that are entered in the System Landscape Directory.
The business systems in the System Landscape Directory relate to a system landscape.
The business systems of business partners are not entered in the System Landscape Directory. To be able to address such business partners logically, use services in the Integration Directory. A business system is a way of specifying a service in the Integration Directory more precisely (business system service).
U can also refer Blog's
Re: Difference betweeen Technical systems and Business systems
For creation of software component see link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3172d290-0201-0010-2b80-c59c8292dcc9
<b>Reward point if it help u understand
</b>
Message was edited by:
Ajay Kumar

Diff b/w Data warehouse and Business Warehouse

Hi all,
what is the Diff b/w Data warehouse and Business Warehouse?

hi..
The diferrence between Datawarehousing and Business Warehouse are as follows.
DataWarehousing is the concept and BIW is a tool that uses this concept in Business applicaitons.
DataWarehousing allows you to analyze tons of data (millions and millions of records of data) in a convinent and optimum way, it is called BIW when applied to Business applications like analyzing the sales of a company.
Advantages- Consedering the volume of business data, BIW allows you to make decisions faster, I mean you can analyze data faster. Support for multiple languges easy to use and so on.
Refer this
Re: WHAT IS THE DIFFERENCE BETWEEN BIW & DATAWAREHOUSING
hope it helps...

BI-IP and Business Objects?

Please refer to the thread:
BI-IP and Business Objects?

Ian,
reading through the messages, there seem to be a few questions that are raised. After attending SAP Financials 2008, here is what I got from it:
1. IP vs BPC: IP is still in production and will be developed (no commitment on time though. I was told somewhere between 18-24 months before it goes to maintenance mode). There is some functionality difference from BPC and right now these are two separate products. There is a talk of a possible integration in the "distant" future
2. BPC is in process of being developed for BI, but currently it is only running on top of Microsoft SQL server. The BI version is slated to be released June 28th, but majority of the experts are fairly pessimistic about that date.
Now, the main question is what will happen to IP when BEx and BO tools converge into one - based on my understanding, we are going to see ADDITIONAL functionality. Since all the WAD and Excel activities are based on BEx API's, it is highly unlikely that they are going to be dismissed in the new product. The process in which we assign functions/commands to the planning model might change, but I think only for the best
Pavel

Use of user status and business actions

Hi all,
I'm new at status profiles, user status and business actions.
Currently we are using status profiles and user status for orders - but business actions aren't assigned to the user status. In a project I should evaluate whether we can use those business actions.
After reading a lot of documentations there is still one question left. What are the business-actions for and how can I use them?
Let's say I've a status profile with following user status with according business actions:
- status: new;   business action: to progress
- status: in progress;   business action: to confirm
- status: confirmed;   business action: decline or close
- status: closed;   business action: close
What happens when a user sets the status of an order to "confirmed"? Will be done additional checks for my order? - If yes: Wich checks will be done and exists there an API to effect these checks or to implement additional checks?
Regards,
Christian

Christian;
If you´re wanting to speak about Status Profile in OP. You can execute whole theses steps in T-code BS02, when in this IMG:
1. Enter a Status Profile.
2. Assign the status profile to an Object Type.
3. Define the User Status.
4. Assign Business Transactions to user statuses.
5. Translate the status profile and user statuses.
You can also to use this function to simulate the status development for a particular object.
To do this, select a status profile and branch to the screen "Allowed Object Types". Then place the cursor on one of the object types.
Using the function Extras -> Status simulation, you can simulate the status changes that could be caused by performing various business transactions, or by changing the staus manually, during the lifetime of the object concerned.
You can also branch directly from simulation to status maintenance for the object concerned, to display information on which transactions are allowed or disallowed in the current situation.
The log function records all the changes you simulate and allows you to navigate freely to see what effects these are having.
Status profile info
Using the function Extras -> Status profile info, you can display a list of all the entries you have made for a particular status profile. The list is structured as follows:
The first block contains the permitted object types.
The second block contains the user statuses.
The third block contains the following information for each user status:
which transactions it allows
which transactions it allows with a warning
which transactions it disallows.
I hope help to you
Regards
Luciano Nobrega

Issues with Office Home and Business 2013 Online redeem

Hi Guys,
I am wondering if anyone has experienced this issue:
We purchased some office licenses via local suppliers, they're medialess, and it's just an email with redeem site's URL and product key.
If i click on the Download link to redeem, it forward to Office Online website and request a Microsoft account to login. We then login use a company based microsoft account. Then what it shows is list of Office 2013 Home and Business items with "Install"
button underneath. I then started look for the one with the right product key, but none of them match the one I've been given from supplier's email.
If i use an installation media, then type in the product key, it will show Redeem Online button again, if I click on it, it ask me to login, once I logged in, it shows list of Office 2013 Home and Business with numbers in the () like (1), (2), (3)....etc.
No matter which way i use, if i continue the installation of selecting any of them in the list, I have to go through Microsoft's telephone activation. Often, we have customer's office 2013 installation corrupted and suddenly none of the office program can
be opened, and we have to uninstall / reinstall office and redo activation and etc.
I am wondering if anyone has experienced this, and whether this is something local supplier's issue or it's something Microsoft should be improving. Right now, we have to order the normal retail version with media, rather than this online version in order
to avoid drama, but for those computers which already installed with online version, we have having issue from time to time.
Any help or comment will be much appreciated!
Thank you very much

Hi,
Usually, you can download and activate Office with the Microsoft Account that associated with your Office 2013 Home and Business subscription on Office Online site.
For example:
https://support.office.com/en-ie/article/Install-Office-365-Home-Personal-or-University-7a28382b-7015-4b5a-9d9b-650d15742c95
I would suggest you contact your local supplier directly, they should give you the detailed instructions on how to do this.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

ISA and Business On Behalf

Similar Messages

Maybe you are looking for