Use of user status and business actions

Hi all,
I'm new at status profiles, user status and business actions.
Currently we are using status profiles and user status for orders - but business actions aren't assigned to the user status. In a project I should evaluate whether we can use those business actions.
After reading a lot of documentations there is still one question left. What are the business-actions for and how can I use them?
Let's say I've a status profile with following user status with according business actions:
- status: new;   business action: to progress
- status: in progress;   business action: to confirm
- status: confirmed;   business action: decline or close
- status: closed;   business action: close
What happens when a user sets the status of an order to "confirmed"? Will be done additional checks for my order? - If yes: Wich checks will be done and exists there an API to effect these checks or to implement additional checks?
Regards,
Christian

Christian;
If you´re wanting to speak about Status Profile in OP. You can execute whole theses steps in T-code BS02, when in this IMG:
1. Enter a Status Profile.
2. Assign the status profile to an Object Type.
3. Define the User Status.
4. Assign Business Transactions to user statuses.
5. Translate the status profile and user statuses.
You can also to use this function to simulate the status development for a particular object.
To do this, select a status profile and branch to the screen "Allowed Object Types". Then place the cursor on one of the object types.
Using the function Extras -> Status simulation, you can simulate the status changes that could be caused by performing various business transactions, or by changing the staus manually, during the lifetime of the object concerned.
You can also branch directly from simulation to status maintenance for the object concerned, to display information on which transactions are allowed or disallowed in the current situation.
The log function records all the changes you simulate and allows you to navigate freely to see what effects these are having.
Status profile info
Using the function Extras -> Status profile info, you can display a list of all the entries you have made for a particular status profile. The list is structured as follows:
The first block contains the permitted object types.
The second block contains the user statuses.
The third block contains the following information for each user status:
which transactions it allows
which transactions it allows with a warning
which transactions it disallows.
I hope help to you
Regards
Luciano Nobrega

Similar Messages

  • Fetching the sales order data using both system status and user status

    Hi,
    Could any one tell me how to fetch sales orders using both system status and user status.
    My requirement is to fetch sales order data in a report where the user enters the system status and user status in the selection screen fields.
    For example i need sales orders where the system status is I1002 i.e. OPEN and user status is E0002 (status profile CMSCON0) that is In Process
    Early replies are appreciated.
    Thanks
    Tanveer

    Hi,
    The system status and user status are stored in CRM_JCDS & CRM_JEST tables you can get the all the order GUID on particular status further pass the order GUID in table CRMD_ORDERADM_H to get transaction ID.
    Regards,
    Dipesh.

  • User status and action profile in campaign

    Hi All,
    I have a question, may be any one can help me. It is very urgent please reply me.
    I am in Marketing Planner and I have created new user status profile, I want to set that profile to use in campaign. I could not find where can I do customizing ( SPRO) to use my user status profile.
    Is it possible that my campaign can have user status as well as system status?
    Do you also have any idea how to trigger my own workflow on changing user status in campaign?  Any document will be really
    appreciated. Thanks in advance.
    With Best Regards,

    Hi Tauqir,
               In marketting planner application you cant use status profile( user status). Second thing is  you cant even include new system statuses by simply modifying the status object. Because while determining statuses , its almost hard coded.So only way out is
    add your statuses in the BADI they have provided.
    Regards
    Ashis

  • *when we use at user -command and give smaple code fro at user-command*

    Hi experts,
    i am new to abap can any body tell me when we use AT USER-COMMAND and give a sample code for that.
    point will be rewarded.
    thanks.

    Hi,
    AT USER-COMMAND  is a list Event.This Event is triggered when user make an action on the Application Toolber Or Menubar.
    Here is the Program.
    START-OF-SELECTION.
      SET PF-STATUS 'TEST'.
      WRITE:  'Basic list, SY-LSIND =', sy-lsind.
    AT LINE-SELECTION.
      WRITE:  'LINE-SELECTION, SY-LSIND =', sy-lsind.
    AT USER-COMMAND.
      CASE sy-ucomm.
        WHEN 'TEST'.
          WRITE:  'TEST, SY-LSIND =', sy-lsind.
      ENDCASE.
    This program uses a status TEST, defined in the Menu Painter.
    Function key F5 has the function code TEST and the text Test for demo.
    Function code TEST is entered in the List menu.
    The function codes PICK and TEST are assigned to pushbuttons.
    The user can trigger the AT USER-COMMAND event either by pressing F5 , or by choosing List -> Test for demo, or by choosing the pushbutton 'Test for demo'.The user can trigger the AT LINE-SELECTION event by selecting a line.
    Hopr This Will help You.
    Regards,
    Sujit

  • Can I use photoshop text styles and photoshop actions with creative cloud photography?

    I'm really confused by this subscription pricing. If I purchase the $9.99/month, do I get the full desktop app of Photoshop and Lightroom? But I see on this page Products they list something called Photoshop CC that costs twice as much. How is that different from the Creative Cloud Photography?
    My main question is whether I can use photoshop text styles and photoshop actions with Creative Cloud Photography, since I just purchased a bundle that includes these and I want to be able to use them. But I'd also like to understand what comes with all of the various products and how they are different.
    My other question is how is Lightroom different from Photoshop? I have a sense of what you can do in Photoshop but I don't know much about Lightroom at all.
    One more question: the free trial -- is it limited in any way besides the time length? If I do that, will I get a clear idea of all that I will be able to do once I subscribe, or are the functions limited in the trial?
    I tried to just send an email to Adobe to ask these questions but apparently they are not interested in responding to emails from people who are not yet paying customers, so I was directed here. Thanks very much for your help!

    I always like to trot this bit about Bridge once in a while or in the voice of the "Two Bobs" from Office Space,
    "Can you tell us exactly what it is you do around here?"
    What Adobe Bridge does:
    Bridge is the coordinating hub of the Creative Suite. Synchronizing color management settings for all suite programs is done from Bridge, and can only be done from Bridge, to take one important use.
    Bridge displays actual thumbnails of many more file types than Finder or Explorer. It also allows instant play of sound or video files more readily than the native OS file managers.
    Bridge allows direct access to file metadata, to embed copyright information  and keywords where appropriate (e.g., for corporate logo vector and raster files). It also displays the fonts used in an InDesign file, the swatches in an INDD or AI and the output plates (including spot color plates) they use.
    When managing the assets for a design project, Bridge allows quick and simple sorting, rating and custom labeling (with color flash indications) of assets. I can rate images according to whether they are rejects, possibles, for review by client, or approved. The filters built into Bridge allow instant isolation of only the approved images or designs in a folder, only the rejects (for deletion) or only files with certain ratings, no matter how many files it contains. It recognizes aspect ratios, so if I only need a landscape or a 16:9 image in a folder of hundreds of images, I turn off the aspect ratios I don't need.
    Once filtered, the remaining visible files can be selected and copied, moved, or deleted without affecting the rest of the contents of a folder.
    Collections are a massively useful feature. One of my clients is a performing arts center, and in a season we turn out dozens of ads, flyers, brochures, web banners, playbills, billboards and other collateral using the same assets over and over. These assets are organized by artist and/or show on disk, but I set up each season's repeating assets as a Collection in Bridge, so that I just have to open the collection and drag and drop these assets into new INDD, AI, PSD, HTML (in Dreamweaver), FLA or AE projects without having to navigate from folder to folder picking up individual files.
    Bridge's Favorites is another place I stack frequently-accessed folders, such as stock photography, backgrounds, and top-level folders for active projects.
    Assets can be divided into subfolders, but a quick toggle of "Show items from subfolders" exposes all of the assets in a single view while maintaining their organization. I will typically keep AIs, PSDs, EPSs, stock photography and client images in separate subfolders within a project. When I'm ready to start pulling assets into an InDesign layout, I toggle this on and simply drag what I need into the layout.
    Bridge comes with Adobe Camera Raw built in, which is many times faster than using Photoshop to adjust jpegs or tiffs for things like tonal range, white balance, cropping, spotting and sharpening, and is non-destructive.
    One tremendously useful Bridge function for InDesign CS5+ users is the "Show linked files" feature, which opens all the linked files in a layout into a single view, regardless of where they are physically located. I often use this when doing alternative layouts from a client-approved mockup for a campaign, to be certain the same assets are used in each piece, or when creating a motion graphic or interactive piece for the campaign in After Effects or Flash.
    The batch and image processing scripts built into Bridge automate things like creating web-ready small jpegs from multiple images, renaming large numbers of files in place or by copying to an alternative location, creating sets of PSD, png, jpeg or other file types from an assortment of image files, and so on.
    Bridge is so much a part of my daily workflow that on my main workstation I have one monitor dedicated to it almost 100%. Bridge just sits open 24/7, ready for use. I would run at half speed without it, no question.

  • Updating User Status and Status Profile for a Project

    Hi,
          I am creating a Project using  BAPI_BUS2001_CREATE.
          which uses a structure  BAPI_BUS2001_NEW for storing details of a New Project.
          It <b>does not have fields for User Status and Status Profile</b> , if any one of you worked on Project Systems, please tell me is there any way to update these 2 fields.
      I have tried lot of FuncModules and BAPIs which deal with PROJECT CHANGE and PROJECT MODIFY but none of them has these 2 fields.
    Please provide me some solution for this.
    Thanks in Advance.

    Hello,
    U need to do like this:
      PERFORM CHANGE_STATUS_CLSD.
    FORM CHANGE_STATUS_CLSD.
      DATA: LR_PROJ LIKE PROJ,
            WA_JEST LIKE JEST,
            LT_PRPS LIKE PRPS OCCURS 0 WITH HEADER LINE,
            LT_JEST LIKE JEST OCCURS 0 WITH HEADER LINE,
            RA_PRPS TYPE RANGE OF POSID WITH HEADER LINE.
      CLEAR: LR_PROJ.
      SELECT SINGLE * FROM PROJ INTO LR_PROJ WHERE PSPID = SP_PSPID.
      IF SY-SUBRC = 0.
        SELECT * FROM JEST INTO TABLE LT_JEST WHERE OBJNR = LR_PROJ-OBJNR.
        LOOP AT LT_JEST INTO JEST.
          IF JEST-STAT = 'I0001' OR JEST-STAT = 'I0002'.
            JEST-INACT = 'X'.
            UPDATE JEST.
          ELSE.
            JEST-INACT = SPACE.
            UPDATE JEST.
          ENDIF.
        ENDLOOP.
        CLEAR: LT_JEST.
        REFRESH: LT_JEST.
        SELECT * FROM PRPS INTO TABLE LT_PRPS WHERE PSPHI = LR_PROJ-PSPNR.
        IF SY-SUBRC = 0.
          SELECT * FROM JEST INTO TABLE LT_JEST FOR ALL ENTRIES IN LT_PRPS
                                                WHERE OBJNR = LT_PRPS-OBJNR.
          LOOP AT LT_JEST INTO JEST.
            IF JEST-STAT = 'I0001' OR JEST-STAT = 'I0002'.
              JEST-INACT = 'X'.
              UPDATE JEST.
            ELSE.
              JEST-INACT = SPACE.
              UPDATE JEST.
            ENDIF.
          ENDLOOP.
        ENDIF.
        LOOP AT LT_PRPS.
          CLEAR WA_JEST.
          SELECT SINGLE * FROM JEST WHERE OBJNR = LT_PRPS-OBJNR
                                      AND  STAT = 'I0046'.
          IF SY-SUBRC NE 0.
            WA_JEST-MANDT = SY-MANDT.
            WA_JEST-OBJNR = LT_PRPS-OBJNR.
            WA_JEST-STAT = 'I0046'.
            WA_JEST-INACT = ' '.
            WA_JEST-CHGNR = '001'.
            INSERT INTO JEST VALUES WA_JEST.
          ENDIF.
        ENDLOOP.
        COMMIT WORK AND WAIT.
      ENDIF.
    ENDFORM.                    " CHANGE_STATUS_CLSD
    REagrds,
    Vasanth

  • Maintain the link between user status and system status

    Hi friends,
    my requirement is In crm transactions when we change the system status(inprocess) then the relevant user status            (inprocess) is also to be changed automatically. how can we do this? wt r the customisations we can do for this?
    pls suggest me? thanks in advance.

    Hi Madhu Sudan,
    When you create User Status in Status Managment...
    Eg: Inprocess
    You assign User Status Triggers Business Transaction.
    So, This maintain the link between the User and System statuses.
    Reward Points if helpful.
    Srini.

  • User Status and system status

    Hi PS Gurus,
    As per client requirement
    a)no finance posting
    b)no cost planning
    c) no budgeting
    only project ,wbs and network(no activity) should be created .
    These all transection should be carried out after releasing of particular WBS,Network (System status REL ).
    We have created user status profile in ok02 and assigned in project profile
    Data maintained in status profile
    St NO Status   StatusShort Text                   Lowest   Highest  Posit    Prior      Auth. cod    
    1    CRET  CREATED                                     1           2         1          1                 
    2    REL   STOP DATA UNLESS REL               2          2         1           1                 
    In status CRET  we have forbidden all business transection which client don't require.
    But when we are relasing the WBS (system status REL) ,user status is remain CRET .
    We want that after releasing WBS ,user staus should change to REL. which allows the all busness transections.
    Kindly help
    Regards
    Project Team 1

    Hi Experts,
    Actually, I have done as suggested over here like creating a NREL user status and it is working fine, but for my client, I had to ensure that the "Release" is allowed only after the  budget is released ( after CJ32). This is working till the time it gets the Sys. status "BUDG" and BUDG gets assigned immediately when we give the budget through CJ30. How to do this ?
    Also, I want this to get only assigned to the topmost WBS whereas as I had assigned this Status profile in the Proj. profile, it is getting assigned for all the WBS... how to overcome this problem ?
    thanks in advance,
    Vinodh.

  • We are having sync issues when trying to use separate user accounts and Apple ID's on the same iMac. What can we do?

    My wife and I share an iMac and we each sync to it using separate user accounts and separate Apple IDs. She has an iPad 2 and I have an iPhone 4. We upgraded the mac to Lion and the iphone to OS 5. Now itunes only recognizes my apple id no matter which user is logged in. Now if I download the Home Depot app to my phone it automatically gets pushed to my wife's iPad, which she does not want. We want to keep things separate. How can we do this?

    You can sync devices with the same iCloud ID, not seperate ones.
    If she has a different login on your Mac, make sure she has her own ID defined in System Prefs > iCloud

  • Appplications using "Administrator" user id and password in J2EE engine...

    All,
    We have a EP 7.0 with SPS 14. Our "Administrator" user id account gets locked every now and then.
    Eventhough if we unlock it or change the password using configtool, it works for sometime..but,again the "Administrator" user id account gets locked.
    Somewhere some application is still using the old password. So,no matter what password we use or we updated the password everywhere..it works for some time and again the its getting locked.
    Can anybody tell me how to find all the applications using "administrator" user id and password or the applications which requires administrator user id directly or indirectly.
    Is nwds and nwdi deployment uses the "administrator" uidpw ?
    Note: We have already tried with updating the password using configtool and updated the password all the places.it works for some time and it gets locked again..Please help..Thanks.

    to Michael Nicholls  
    Addy 365 posts:        
    We have already tried with updating the password using configtool and updated the password all the places
    Yes from log it looks like impossible to check, but you can determine immediately whether the blockage occurs after restart, or only at certain times of the launch of a job ....
    To Addy 365
    search after restart the lines in security log like
    LOGIN.FAILED, and  try to recheck ol RFC  from all other system's you have in your enterprise ....
    P.S. first check are you have any available RFC listeners in JCO RFC provider.
    To Michael Nicholls    in ABAP side we can check in sm21 from with terminal blocking occurs, why Why the same is not implemented in JAVA? Or for this need special tool like Wily Introscope ?
    Regards.

  • The user status and system status

    hi, expert.
    1.  how to bind the user status and the system status.
    2.  if the status of the network is "CRTD", the status of  WBS can't be "TECO".
    how to customize.
    Please explain me all the steps to be required.
    Thanks in advance!

    Hello
    Define User status in OK02. Define various statuses and number them. Then double click on each status n you will be taken to transaction control screen. Here click on create tab and then set the influencing statuses for each system status. However this will be individual for WBS and Network.
    Define them seperately for WBS and Network
    Thanks

  • EQUIPEMENT - User status and system status

    Hi freind,
    It would be great help if someone can brief me on  procedure / bapi or function module availability for USER STATUS and SYSTEM STATUS update to equipement.
    regards
    Pravin

    hi Pravin,
    Check this out
    <b>USER STATUS</b>
    http://help.sap.com/saphelp_erp2005/helpdata/en/56/254c40cc538437e10000000a155106/frameset.htm
    <b>SYSTEM STATUS</b>
    http://help.sap.com/saphelp_erp2005/helpdata/en/bd/7924da4d0d9043b426fc081669f27a/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/9f/972f72ec2a40479d2a7dec4500a4f2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/68/ebac18beabc34b90d4c1949a66dece/frameset.htm
    <b>USER STATUS</b>/<b>SYSTEM STATUS</b>
    http://help.sap.com/saphelp_erp2005/helpdata/en/89/a432ff461e11d182b50000e829fbfe/frameset.htm
    Regards,
    Santosh

  • User Status and System Status - CJ20n

    Hi,
    I would like to know if any problem but when i have the user status and the system status are filled those fields no longer appear in the TC CJ20N.
    What could be the problem??
    tks in advanced

    I know it's been a long time, but I think I can help...
    Didn't you activate que status exit?
    If yes, you problem is there, you have to pass the information from IMPORT to EXPORT in your exit, or deactivate it.
    Best regards,

  • User status and System status for Trade Promotion

    Hi all!
    CRM 7.0 Web UI Trade Promotion Management.
    I have a trade promotion with custom status already assigned and visible from WEB UI, Is it possible assigning to such TP also a standard status picked amongst TP system status?
    Take into account that in the as is configuration we find in the same TP drop down list user status and system status.
    2 questions:
    1.     How can I hide the system status?
    2.     It is possible to group together user status and system status? E.g. User status: fundrequest, inplanning, submitted...+ released (system status).

    Hi Virginia Zitun,
    Can you tell me how did you manage to solve the issue.
    rgds,
    Venkat

  • I am using the user name and password given to me by

    I am using the user name and password given to me by Virgin on the email 'other' , after the initial page it comes up with IMAP settings which I don't have so I click on the POP page and give all the settings listed by Virgin on ints website (using ntlworld and not virgin as instructed) but it still comes up with 'Unable to Verify'  So something is sticking somehwere but I don't know where!
    Thanks very grateful for assistance

    Try going into Settings > Mail, Contacts, Calendars and select that email account and try re-typing in the account's username and password

Maybe you are looking for