ISE: Database Purge for Tables failed

Hi,
I found out my ISE Admin/PSN node and iPEP node didn't showing any log.
And it show me some message of "Database Purge for Tables failed"
attache is the snapshot of it, anyone can comment?
million thanks
Noel

Hi Marcin,
Thanks for the reply. Sorry that's lack of info on the device.
The NAC3315 loaded with version 1.1.3.124, with patch 1 loaded.
I will give a try and see would it solve this issue or not.
By the way, my deployment is one Admin/PSN node, another unit is iPEP, both having the identical ISE version and patches.
My question:
should i patch both machine?
how do i patch iPEP unit ? in CLI mode? (there's no maintenance GUI accessibility to the iPEP)
Thanks
Noel

Similar Messages

Database purge multiple tables many records

This is a design question. I have the following scenario.
small med Large(15million recs)
TBL_A TBL_B TBL_C Code_TBL
custId CustId CustId
agtId agtId
tran tran
startDt retentMonths
Based on Start Date purge corresponding records from
TBL_A, TBL_B, and TBL_C. This is currently done with three result sets and building a delete query with TBL_A.custId each time.
Leave CustID in tables where Code_TBL.retentMonths is greater than the age(calculated field) of the TBL_A.startDt.
The problem is that I don't want to pull down or access 15million records each time I purge. My only thought is to parameterize the purge to determine which codes have retention months(only a few will be used - 10-15%) and pull those records into a result set. then update TBL_A.retentMonths with an appropriate value. Then run the query vs the TBL_A.startDt and TBL_A.retentMonths.
Any suggestions, or places to look for dealing with these types of delete issues in JDBC.

The WHERE consition of a DELETE statement can refer to the SELECT results on other tables - not the quickest way, but better than scanning all your records.
In general:
DELETE FROM TABLEx WHERE IDx =
( SELECT IDy FROM TABLEy WHERE <date-condition> AND <month condition> ... );
For your problem you must do 3 DELETEs for your 3 TABLEs. But the 2nd and 3rd DELETE must use rows that are deleted in the 1st DELETE.
So I would do this trick:
1) Add a char(1) column "DELETE_FLAG" to each table - set it to "N".
2) Instead of the 3 DELETEs do UPDATEs of this column to "Y".
3) Then do your 3 DELETEs simply on "WHERE DELETE_FLAG = 'Y' "
If this logic is done in multiuser environment, use AutoCommit false and make it 1 transaction in appropiate isolation level.
Helps?

Import tables failed with message" BR1233E Owner name not allowed in param"

Dear ALL,
After finished sucessfully export some tables i try reimport the Tables, why give me a message like this screen below, Please help me,
thanks and Best Regards,
Chrisna
FYI,
I using the brspace command for export and import.
Main options for import from dump file: /oracle/XXX/sapreorg/sdvmynml.edd/expdat.dmp
1 * Import utility (utility) ............... [IMP]
2 - Import type (type) ..................... [tables]
3 - Owner for import (owner) ............... [SAPR3]
4 * Tables for import (tables) ............. [SXNODES,SXROUTE,SXSERV,SXADMINTAB,SXDOMAINS,SOPR,SXADDRTYPE,SXCONVERT,SXCONVERT2,SXCOS,... (12 tables)]
5 - Import table rows (rows) ............... [yes]
6 - Import table indexes (indexes) ......... [yes]
7 - Import table constraints (constraints) . [yes]
8 - Import table grants (grants) ........... [yes]
9 # Import table triggers (triggers) ....... [yes]
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
c
BR0280I BRSPACE time stamp: 2007-06-20 07.53.36
BR0663I Your choice: 'c'
BR0259I Program execution will be continued...
BR1233E Owner name not allowed in parameter/option 'imp_table|-tables'
BR0691E Checking input value for 'tables' failed
BR0669I Cannot continue due to previous warnings or errors - you can go back to repeat the last action

Thanks the issue already solved
thanks and Best Regards,
Chrisna

Error : Opening a rowset for "Sheet$" failed. Check that the object exists in the database.

Hi,
i am trying to load the data from excel sheet using For each loop container in ssis 2005.
But it gave me the below error:
Error: Opening a rowset for "Sheet1$" failed. Check that the object exists in the database.
[DTS.Pipeline] Error: "component "failed validation and returned validation status "VS_ISBROKEN".
Error: There were errors during task validation.
Could you please let me know the solution
Regards
Sqlstud

That message usually means validation has failed;
Have any of the underlying tables changed? Data types, lengths, maybe even column ordering, etc...?
try this..
Right-click on the Data Flow Task and select Properties. Then set DelayValidation =TRUE.
Let us TRY this |
My Blog :: http://quest4gen.blogspot.com/
Thanks ETL.
Everything is fine..(Datatypes,length,orderings etc)
Already i have set
DelayValidation =TRUE.
IS there any other problem?
Regards
Sqlstud

Creation of secondary indexes for table "RSBATCHCTRL_PAR" failed

Hi ,
We have installed EHP1 on our BI7.0 system successfully, later we are trying to apply SPS01 for this EHP but we got the follwoing error during TBATG conversion.
2 EGT092 Conversion of table "RSBATCHCTRL_PAR" was restarted
2 EGT241 The conversion is continued at step "6"
2 EGT246 Type of conversion: "T" -> "T"
2 EGT240XBegin step "RSBATCHCTRL_PAR-STEP6":
4 EGT281 sql:
4 ED0314 CREATE
4 ED0314 INDEX [RSBATCHCTRL_PAR~DB] ON [RSBATCHCTRL_PAR]
4 ED0314 ( [JOBNAME] ,
4 ED0314 [JOBCOUNT] ,
4 ED0314 [SERVER] ,
4 ED0314 [HOST] ,
4 ED0314 [WP_NO] ,
4 ED0314 [WP_PID] ,
4 ED0314 [PROCESS_TYPE] )
4 ED0314 WITH ( ONLINE=OFF )
4 ED0314 ON [PRIMARY]
2 ED0314 Line 1: Incorrect syntax near '('.
3 EDA093 "DDL time(___1):" ".........6" milliseconds
2EEGT236 The SQL statement was not executed
2EEDI006 Index " " could not be created completely in the database
2EEGT221 Creation of secondary indexes for table "RSBATCHCTRL_PAR" failed
2EEGT239 Error in step "RSBATCHCTRL_PAR-STEP6"
2 EGT253XTotal time for table "RSBATCHCTRL_PAR": "000:00:00"
2EEGT094 Conversion could not be restarted
2 EGT067 Request for "RSBATCHCTRL_PAR" could not be executed
1 ED0327XProcess..................: "ferrari_12"
1 ED0302X=========================================================================
1 ED0314 DD: Execution of Database Operations
1 ED0302 =========================================================================
1 ED0327 Process..................: "ferrari_12"
1 ED0319 Return code..............: "0"
1 ED0314 Phase 001................: < 1 sec. (Preprocessing of TBATG)
1 ED0314 Phase 002................: < 1 sec. (Partitioning)
1 ED0309 Program runtime..........: "< 1 sec."
1 ED0305 Date, time...............: "03.06.2009", "12:47:21"
1 ED0318 Program end==============================================================
1 ETP166 CONVERSION OF DD OBJECTS (TBATG)
1 ETP110 end date and time : "20090603124721"
1 ETP111 exit code : "8"
1 ETP199 ######################################
System properties:
SAP - BI7.0 with EHP1
Database - MSSQL 2000
OS - Windows2003
Please suggest.
Thanks in advance,
Pavan.

> We have installed EHP1 on our BI7.0 system successfully, later we are trying to apply SPS01 for this EHP but we got the follwoing error during TBATG conversion.
> 2 ED0314 Line 1: Incorrect syntax near '('.
> 3 EDA093 "DDL time(___1):" ".........6" milliseconds
> 2EEGT236 The SQL statement was not executed
This is a known problem with SQL Server 2000, see
Note 1180553 - Syntax error 170 during index creation on SQL 2000
I highly suggest upgrading to SQL Server 2005 or 2008.
Markus

CSSCAN for database character set conversion failing with ORA-01578

Hi ,
CSSCAN for database character set conversion failing with ORA-01578: ORACLE data block corrupted (file # 84, block # 23930). please help me out in this regard.
Thanks,
Sravan.

Hi Anand,
Thanks for your update. The segment is a table not an index in my case. And i got this error while running CSSCAN on Apps database for character set conversion to UTF8 from WE8ISO8859P1. Please find the snapshot below for your reference.
SQL> select segment_name, segment_type, owner from dba_extents where file_id = 84 and 23930 between block_id and block_id + blocks - 1;
SEGMENT_NAME
SEGMENT_TYPE OWNER
EDW_LOOKUP_M
TABLE POA
SQL> ANALYZE TABLE POA.EDW_LOOKUP_M VALIDATE STRUCTURE CASCADE;
ANALYZE TABLE POA.EDW_LOOKUP_M VALIDATE STRUCTURE CASCADE
ERROR at line 1:
ORA-01578: ORACLE data block corrupted (file # 84, block # 23930)
ORA-01110: data file 84: '/d911/oracle/dbcondata/poad01.dbf'
Thanks,
Sravan.

Database error: TemSe- RTAB-S/G(8)- 4 for table TCPSBUILD key

Hi,
I am checking in sm21, I getting continously this syslog Database error: TemSe->RTAB-S/G(8)->4 for table TCPSBUILD key.
I deleted records of past 10 days from TST03 table.
but still I am getting this error in SM21.
Would anyone please suggest on this?
MY sap Component is SAP ECC 6.0
Thanks in advance.
Regards,
Manish

Hi all,
I have the same message but on the Windows event viewer.
Because of this, backups are failing.
When I try to make a consistensy check throught SP12 there is a dump:
The program "RSTS0020" has exceeded the maximum permitted runtime without
interruption and has therefore been terminated.
I have tried to launch also the RSTS0030 program in dialog, no objects are found.
Can someone help please?

Database error: TemSe- RTAB-S/G(8)- 1 for table TCPSBUILD key 1100T*

Dear All,
I am getting the below error in txsm21.Please suggest how to solve it
we are using ecc6 , oracle 10g on windows.
Database error 12518 at SEL access to table TCPSBUILD
> ORA-12518: TNS:listener could not hand off client connection
Database error: TemSe->RTAB-S/G(8)->1 for table TCPSBUILD key 1100T*
No Code Page Conversion '4103'->'1100' : CCC->CCC
Database error 12518 at SEL access to table TCPSBUILD
> ORA-12518: TNS:listener could not hand off client connection
Database error: TemSe->RTAB-S/G(8)->1 for table TCPSBUILD key 1100T*
No Code Page Conversion '4103'->'1100' : CCC->CCC
Database error: TemSe->RTAB-S/G(8)->1 for table TCPSBUILD key 1100T*
No Code Page Conversion '4103'->'1100' : CCC->CCC
Database error 12518 at SEL access to table TCPSBUILD
> ORA-12518: TNS:listener could not hand off client connection
Database error: TemSe->RTAB-S/G(8)->1 for table TCPSBUILD key 1100T*
No Code Page Conversion '4103'->'1100' : CCC->CCC
Database error: TemSe->RTAB-S/G(8)->1 for table TCPSBUILD key 1100T*
No Code Page Conversion '4103'->'1100' : CCC->CCC
Database error 12518 at SEL access to table TCPSBUILD
> ORA-12518: TNS:listener could not hand off client connection
Database error: TemSe->RTAB-S/G(8)->1 for table TCPSBUILD key
No Code Page Conversion '4103'->'1100' : CCC->CCC
Database error 12518 at SEL access to table TCPSBUILD
> ORA-12518: TNS:listener could not hand off client connection
Database error: TemSe->RTAB-S/G(8)->1 for table TCPSBUILD key
No Code Page Conversion '4103'->'1100' : CCC->CCC
Database error: TemSe->RTAB-S/G(8)->1 for table TCPSBUILD key
No Code Page Conversion '4103'->'1100' : CCC->CCC
Database error: TemSe->RTAB-S/G(8)->1 for table TCPSBUILD key
No Code Page Conversion '4103'->'1100' : CCC->CCC
Operating system call recv failed (error no. 10054)
Regards,
Kumar

Hi,
Check SAP Note 864267 (Code page conversion error after WP has left reconnect state). It might help .
Regards,
Neel

Database error: TemSe- XRTAB(0)- 1 for table TST01

Dear All
following error is showing in system log from yesterday every 3 minute intreval
SQL error 3114 . Work processes in reconnect status
Database error: TemSe->XRTAB(0)->1 for table TST01 key
[900]JOBLGX09372801X60922,1
Failed to read status entry for job SWWERRE
Failed to create log for job SWWERRE
Failed to read status entry for job SWWERRE
SQL error 3114 . Work processes in reconnect status
Database error: TemSe->XRTAB(0)->1 for table TST01 key
[900]JOBLGX09212801X09555,1
Failed to read status entry for job SWWDHEX
Failed to create log for job SWWDHEX
Failed to read status entry for job SWWDHEX
pl reply

Hi Baikerikar,
As per I see, the particular log getting appened in the log when a given workprocess trying to perform a 'WORKFLOW' related task. Both tasks SWWERRE and SWWDHEX are two reports; report SWWERRE helps in clean-up error out workflow items and report SWWDHEX helps in monitoring the deadlines of workflow items.
so please check the following
- TempSec (SP12) - consistence check -> Delete All (if systems lists any entries)
- Printer Consistence (SPAD)->Administration->Check Consistence -> Delete All (if systems lists any entries)
- SM12 for locks.- -> Delete All (if systems lists any entries)
- And also check 'SAP_REORG_JOB' running fine in the system.
You perhaps respond back if the above key tasks does not resolve the issue.
Regards
Sekhar

Database error: TemSe- XRTAB(2)- 1 for table TST01 key [400]JOBLGX13132201X

Hi
We are getting the next erros with the jobs:
13:13:51 PRDAUNE2_PRD_02      BTC 22 000 SAPSYS            F6H Database error: TemSe->XRTAB(2)->1 for table TST01 key
13:13:51 PRDAUNE2_PRD_02      BTC 22 000 SAPSYS            GZZ > retry creation JOBLGX btctlgow216#
13:13:51 PRDAUNE2_PRD_02      BTC 22 000 SAPSYS            F6H Database error: TemSe->XRTAB(2)->1 for table TST01 key [400]JOBLGX13132201X28173,1
13:13:51 PRDAUNE2_PRD_02      BTC 22 000 SAPSYS            GZZ > retry creation JOBLGX btctlgow216#
13:13:51 PRDAUNE2_PRD_02      BTC 22 000 SAPSYS            F6H Database error: TemSe->XRTAB(2)->1 for table TST01 key [400]JOBLGX13132201X28173,1
13:13:51 PRDAUNE2_PRD_02      BTC 22 000 SAPSYS            GZZ > retry creation JOBLGX btctlgow216#
13:13:51 PRDAUNE2_PRD_02      BTC 22 000 SAPSYS            F6H Database error: TemSe->XRTAB(2)->1 for table TST01 key [400]JOBLGX13132201X28173,1
13:13:51 PRDAUNE2_PRD_02      BTC 22 000 SAPSYS            ECF Failed to create log for job POLCASHWIN
13:13:51 PRDAUNE2_PRD_02      BTC 22 000 SAPSYS            EBC > Job POLCASHWIN
13:13:51 PRDAUNE2_PRD_02      BTC 22 000 SAPSYS            EAY Failed to read status entry for job POLCASHWIN
13:13:51 PRDAUNE2_PRD_02      BTC 22 000 SAPSYS            EBC > Job POLCASHWIN
13:24:21 PRDAUNE2_PRD_02      BTC 22 000 SAPSYS            BYM SQL error 0 . Work processes in reconnect status
We make a consistency check of spool and temse but nothing is wrong, but if we apply Check Status in the SM37 some jobs change to Active and run but other are in same status Ready
We olny found the note 67055 but recommended the consistency check.
Best Regards
Reynaldo Rebolledo

Hi Reynaldo,
Check for Tablespace PSAPTEMP size for Oracle database when job is running.
If tablespace is full try adding datafile and run the job.
Award Points if Helpful

Database error: TemSe- XRTAB(3)- 1 for table TST01 key

Hi Sap Gurus,
BZ Y Unexpected return value 1 when calling up DbSlR
BY J Function ROLLBACK on connection R/3 failed
R3 9 Error in DB rollback/SyFlush, return code 016384
BY 4 Database error 0 at UPD access to table TST01
BY 0 >
F6 H Database error: TemSe->XRTAB(3)->1 for table TST01 key
Q0 2 Stop Workp. 14, PID 4186340
Q0 1 Start Workp. 14, 16 times since system startup. PID 9 646770
F6 F TemSe object JOBLGX22303300X49850 was closed remotely
F6 V Invalid address (NULL) was transferred
EC F Failed to create the log for job No joblog, 4C412205C6C80300E1008
R4 7 Delete session 001 after error 023
Q0 I Operating system call getaddrinfo failed (error no. 0 )
Q0 I Operating system call getaddrinfo failed (error no. 0 )
BZ Y Unexpected return value 1 when calling up DbSlR
BY J Function ROLLBACK on connection R/3 failed
R3 9 Error in DB rollback/SyFlush, return code 016384
BY 4 Database error 0 at UPD access to table TST01
BY 0 >
F6 H Database error: TemSe->XRTAB(3)->1 for table TST01 key
Any idea to avoid the system log entries.
Regards
Munish Jindal

Hi Munish,
For TemSe error first point of resolution will be at T - Code : SP12. In there select,
TemSe Data Storage --> Consistency Check. This will run for a while depending on the number of recored within the TSTO1 table. Once the execution is completed delete all the records displayed in red.
Apart from above step, you can use T - Code: SPAD. In there, you will find two tabs
a) Devices/servers
b) Admin.
within admin tab select "Delete Old Spool Request". You will see a popup. In there you can select "Request already printed" check box and Minimum Age in day <> depends on your requirement. I sugest for 7 days and execute. This also takes certain amount of time to get executed.
In the same T - Code: SPAD, Select Administration --> Check Consistency
Make sure Spool re-organizing job is scheduled that will be executed daily at night to clear spool requrest that are older than 10 days in age.
I guess this helps to some extent.
Regards,
Nani Chowdary

Example of generating excel dynamically in ssis? geting error [Excel Destination [190]] Error: Opening a rowset for "Excel_Destination$" failed. Check that the object exists in the database.

example of generating excel dynamically in ssis? geting error [Excel Destination [190]] Error: Opening a rowset for "Excel_Destination$" failed. Check that the object exists in the database.

Hi Vijay
Can you be little bit more specific, did you receive this error when you are designing this pacakge using BIDS
Becuase when you are designing this pacakge in BIDS, you need to manaually create a excel sheet manually for the first time you run,
are you creating excel sheet using execute sql task and excel connection with input from a variable?
Did you receive this error in validation phase or execution phase ?
Can you share your query to create table in excel ?
http://sqljunkieshare.com/2012/02/28/how-to-create-and-map-excel-destination-dynamically-in-ssis/
Use the above post

Wait on the Database Engine recovery handle failed. Check the SQL server error log for potential causes in SQL Server 2012 Developer Edition

I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htm

Hi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

SAP database tables - Column statistics not found for table in DB02 - During import, inconsistent tables were found - Some open conversion requests still exist in the ABAP dictionary.

Hi Experts,
I'm implementing SAP note 1990492 which requires manual implementation. Implementation includes modifying standard tables (i.e. append
the structure FIEU_S_APP_H to table FIEUD_FIDOC_H). After this I've adjusted the table in SE14 (Database Utility). I've done checks in SE14 and it shows the table is consistent.
But during DB02 -> Space folder -> Single table analysis -> Input table name -> Indexes tab -> Upon clicking statistics, there is a warning "Column statistics not found for table".
Our basis team is implementing an Add-On in the development system related to RWD Context Sensitive Help. They cannot proceed due to the following inconsistencies found in the table.
Screenshot error from the activity:
Screenshot from DB02:
I'm an ABAP developer and have no other ideas on what to do. Thanks in Advanced.

Hi All,
We were able to fix the issue through the following:
1. Call transaction
SE14.
2. Enter the name of
the table and choose "Edit".
3. Choose
"Indexes".
4. Select the index
and choose "Choose (F2)".
5. If you choose
"Activate and adjust", the system creates the index again and it is
consistent.
6. Check the object
log of this activation.
7. If an error
occurs, eliminate the cause and reactivate the index.

SQL database login for 'SharePoint_Config_2010' on instance 'DB server' failed. Additional error information from SQL Server is included below.

we formatted Database server and restored all the databases from the backup. but the sharepoint site is giving below error when i access the home page.
we have 3 application servers in that two are working fine, but only one server getting the below error.
SQL database login for 'SharePoint_Config_2010' on instance 'db server' failed. Additional error information from SQL Server is included below.
Login failed for user 'domain\user'.
could you help what is the issue?

Hi,
According to your post, my understanding is that you failed to access sharepoint site with one application server.
It was due to the MOM/SCOM Agent that has a SharePoint management pack installed, the agents Windows Service runs as ‘Local System’ and thus causes this.
The workaround is to either kill the SCOM agent service, or set it to run as a dedicated service account.
In addtion, I recommend to add the logon account of the SharePoint Timer service as a user of the SharePoint_Config database. Give role membership to the account db_owner.
You also need to add the SharePoint accounts back into sql server.
There are some similar articles for you to take a look at:
http://blog.blksthl.com/2012/04/26/login-for-sharepoint_config-login-failed-for-user-domaincomputername-scom-agent/
http://msdn.microsoft.com/en-us/library/jj551781(v=nav.70).aspx
http://sharepoint.stackexchange.com/questions/51623/moved-sql-databases-for-sharepoint-2010-and-now-have-a-3351-error
Best Regards,
Linda Li
Linda Li
TechNet Community Support

ISE: Database Purge for Tables failed

Similar Messages

Maybe you are looking for