ISE logs are not very explicit

Hello,
I 've a very hard time trying to debug some rejected connexions due to a lack of information within the logs.
I'd like to know where to look to find out the condition or sub-conditon in an AuthZ policy that lead to a failed connexion.
Best regards.
V.

I agree with Tarik, you will have to clarify a bit more on what you are experiencing/looking for. Logs in ISE are amazing..try working with ACS 4.x Almost everything can be found under "Operations > Authentication" From there you can hit the "Magnifying Glass" under details and gather more detailed information.
Thank you for rating!

Similar Messages

After install Windows 10, the texts in Skype are not very neat, with low definition

After install Windows 10, the texts in Skype are not very neat, with low definition. This has happend just with Skype. Do you know how I can fix it?

I HAVE FOUND A FIX! Searching through the support blogs paid off in a big way. A minor registry edit is all it took and my drive is working like new! Here's the fix. My system is Windows 10 64-bit.  Resolution 5: Create a registry subkey
Note To use this method, you must be logged on to Windows as an administrator. If you need help verifying that you are an administrator, go tohttp://support.microsoft.com/gp/admin
Important Follow the steps in this section carefully. Serious problems might occur if you modify the registry incorrectly. Before you modify it, back up the registry for restoration in case problems occur.
To create the registry subkey, follow these steps:
    Press the Windows logo key + R to open the Run box. (or right-click on windows icon in lower left corner)
    Type regedit in the Run box, then press Enter. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow
    In the navigation pane, locate the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\atapi
    Right-click atapi, point to New, then click Key.
    Type Controller0, and then press Enter.
    Right-click Controller0, point to New, and then click DWORD(32-bit) Value .
    Type EnumDevice1, and then press Enter.
    Right-click EnumDevice1, click Modify....
    Type 1 in the Value data box, and then click OK.
    Exit Registry Editor.

Logs are not getting applied in the standby database

Hello,
I have created a physical standby database and in it the logs are not getting applied..
following is an extract of the standby alert log
Wed Sep 05 07:53:59 2012
Media Recovery Log /u01/oracle/oradata/ABC/archives/1_37638_765704228.arc
Error opening /u01/oracle/oradata/ABC/archives/1_37638_765704228.arc
Attempting refetch
Media Recovery Waiting for thread 1 sequence 37638
Fetching gap sequence in thread 1, gap sequence 37638-37643
Wed Sep 05 07:53:59 2012
RFS[46]: Assigned to RFS process 3081
RFS[46]: Allowing overwrite of partial archivelog for thread 1 sequence 37638
RFS[46]: Opened log for thread 1 sequence *37638* dbid 1723205832 branch 765704228
Wed Sep 05 07:55:34 2012
RFS[42]: Possible network disconnect with primary database
However, the archived files are getting copied to the standby server.
I tried registering and recovering the logs but it also failed..
Follows some of the information,
Primary
Oralce 11R2 EE
SQL> select max(sequence#) from v$log where archived='YES';
MAX(SEQUENCE#)
37668
SQL> select DEST_NAME, RECOVERY_MODE,DESTINATION,ARCHIVED_SEQ#,APPLIED_SEQ#, SYNCHRONIZATION_STATUS,SYNCHRONIZED,GAP_STATUS from v$archive_dest_status where DEST_NAME = 'LOG_ARCHIVE_DEST_3';
DEST_NAME RECOVERY_MODE DESTINATION ARCHIVED_SEQ# APPLIED_SEQ# SYNCHRONIZATION_STATUS SYNCHRONIZED GAP_STATUS
LOG_ARCHIVE_DEST_3 MANAGED REAL TIME APPLY ABC 37356 0 CHECK CONFIGURATION NO RESOLVABLE GAP
Standby
Oralce 11R2 EE
SQL> select max(sequence#) from v$archived_log where applied='YES';
MAX(SEQUENCE#)
37637
SQL> select * from v$archive_gap;
no rows selected
SQL> select open_mode, database_role from v$database;
OPEN_MODE DATABASE_ROLE
READ ONLY WITH APPLY PHYSICAL STANDBY
Please help me to troubleshoot this and get the standby in sync..
Thanks a lot..

the results are as follows..
SQL> select process, status, group#, thread#, sequence# from v$managed_standby order by process, group#, thread#, sequence#;
PROCESS STATUS GROUP# THREAD# SEQUENCE#
ARCH CLOSING 1 1 37644
ARCH CLOSING 1 1 37659
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
MRP0 WAIT_FOR_GAP N/A 1 37638
RFS IDLE N/A 0 0
RFS IDLE N/A 0 0
RFS IDLE N/A 0 0
RFS RECEIVING N/A 1 37638
RFS RECEIVING N/A 1 37639
RFS RECEIVING N/A 1 37640
RFS RECEIVING N/A 1 37641
RFS RECEIVING N/A 1 37642
RFS RECEIVING N/A 1 37655
RFS RECEIVING N/A 1 37673
RFS RECEIVING N/A 1 37675
42 rows selected.
SQL>
SQL> select name,value, time_computed from v$dataguard_stats;
NAME VALUE TIME_COMPUTED
transport lag +00 02:44:33 09/05/2012 09:25:58
apply lag +00 03:14:30 09/05/2012 09:25:58
apply finish time +00 00:01:09.974 09/05/2012 09:25:58
estimated startup time 12 09/05/2012 09:25:58
SQL> select timestamp , facility, dest_id, message_num, error_code, message from v$dataguard_status order by timestamp
TIMESTAMP FACILITY DEST_ID MESSAGE_NUM ERROR_CODE MESSAGE
05-SEP-12 Remote File Server 0 60 0 RFS[13]: Assigned to RFS process 2792
05-SEP-12 Remote File Server 0 59 0 RFS[12]: Assigned to RFS process 2790
05-SEP-12 Log Apply Services 0 61 16037 MRP0: Background Media Recovery cancelled with status 16037
05-SEP-12 Log Apply Services 0 62 0 MRP0: Background Media Recovery process shutdown
05-SEP-12 Log Apply Services 0 63 0 Managed Standby Recovery Canceled
05-SEP-12 Log Apply Services 0 64 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 65 0 Attempt to start background Managed Standby Recovery process
05-SEP-12 Log Apply Services 0 66 0 MRP0: Background Managed Standby Recovery process started
05-SEP-12 Log Apply Services 0 67 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 68 0 Media Recovery Waiting for thread 1 sequence 37638 (in transit)
05-SEP-12 Network Services 0 69 0 RFS[5]: Possible network disconnect with primary database
05-SEP-12 Network Services 0 70 0 RFS[6]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 71 0 RFS[14]: Assigned to RFS process 2829
05-SEP-12 Remote File Server 0 72 0 RFS[15]: Assigned to RFS process 2831
05-SEP-12 Network Services 0 73 0 RFS[9]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 74 0 RFS[16]: Assigned to RFS process 2833
05-SEP-12 Network Services 0 75 0 RFS[1]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 76 0 RFS[17]: Assigned to RFS process 2837
05-SEP-12 Network Services 0 77 0 RFS[3]: Possible network disconnect with primary database
05-SEP-12 Network Services 0 78 0 RFS[2]: Possible network disconnect with primary database
05-SEP-12 Network Services 0 79 0 RFS[7]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 80 0 RFS[18]: Assigned to RFS process 2848
05-SEP-12 Network Services 0 81 0 RFS[16]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 82 0 RFS[19]: Assigned to RFS process 2886
05-SEP-12 Network Services 0 83 0 RFS[19]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 84 0 RFS[20]: Assigned to RFS process 2894
05-SEP-12 Log Apply Services 0 85 16037 MRP0: Background Media Recovery cancelled with status 16037
05-SEP-12 Log Apply Services 0 86 0 MRP0: Background Media Recovery process shutdown
05-SEP-12 Log Apply Services 0 87 0 Managed Standby Recovery Canceled
05-SEP-12 Remote File Server 0 89 0 RFS[22]: Assigned to RFS process 2900
05-SEP-12 Remote File Server 0 88 0 RFS[21]: Assigned to RFS process 2898
05-SEP-12 Remote File Server 0 90 0 RFS[23]: Assigned to RFS process 2902
05-SEP-12 Remote File Server 0 91 0 Primary database is in MAXIMUM PERFORMANCE mode
05-SEP-12 Remote File Server 0 92 0 RFS[24]: Assigned to RFS process 2904
05-SEP-12 Remote File Server 0 93 0 RFS[25]: Assigned to RFS process 2906
05-SEP-12 Log Apply Services 0 94 0 Attempt to start background Managed Standby Recovery process
05-SEP-12 Log Apply Services 0 95 0 MRP0: Background Managed Standby Recovery process started
05-SEP-12 Log Apply Services 0 96 0 Managed Standby Recovery starting Real Time Apply
05-SEP-12 Log Apply Services 0 97 0 Media Recovery Waiting for thread 1 sequence 37638 (in transit)
05-SEP-12 Log Transport Services 0 98 0 ARCa: Beginning to archive thread 1 sequence 37644 (7911979302-7912040568)
05-SEP-12 Log Transport Services 0 99 0 ARCa: Completed archiving thread 1 sequence 37644 (0-0)
05-SEP-12 Network Services 0 100 0 RFS[8]: Possible network disconnect with primary database
05-SEP-12 Log Apply Services 0 101 16037 MRP0: Background Media Recovery cancelled with status 16037
05-SEP-12 Log Apply Services 0 102 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 103 0 MRP0: Background Media Recovery process shutdown
05-SEP-12 Log Apply Services 0 104 0 Managed Standby Recovery Canceled
05-SEP-12 Network Services 0 105 0 RFS[20]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 106 0 RFS[26]: Assigned to RFS process 2930
05-SEP-12 Network Services 0 107 0 RFS[24]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 108 0 RFS[27]: Assigned to RFS process 2938
05-SEP-12 Network Services 0 109 0 RFS[14]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 110 0 RFS[28]: Assigned to RFS process 2942
05-SEP-12 Network Services 0 111 0 RFS[15]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 112 0 RFS[29]: Assigned to RFS process 2986
05-SEP-12 Network Services 0 113 0 RFS[17]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 114 0 RFS[30]: Assigned to RFS process 2988
05-SEP-12 Log Apply Services 0 115 0 Attempt to start background Managed Standby Recovery process
05-SEP-12 Log Apply Services 0 116 0 MRP0: Background Managed Standby Recovery process started
05-SEP-12 Log Apply Services 0 117 0 Managed Standby Recovery starting Real Time Apply
05-SEP-12 Log Apply Services 0 118 0 Media Recovery Waiting for thread 1 sequence 37638 (in transit)
05-SEP-12 Network Services 0 119 0 RFS[18]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 120 0 RFS[31]: Assigned to RFS process 3003
05-SEP-12 Network Services 0 121 0 RFS[26]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 122 0 RFS[32]: Assigned to RFS process 3005
05-SEP-12 Network Services 0 123 0 RFS[27]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 124 0 RFS[33]: Assigned to RFS process 3009
05-SEP-12 Remote File Server 0 125 0 RFS[34]: Assigned to RFS process 3012
05-SEP-12 Log Apply Services 0 127 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 126 16037 MRP0: Background Media Recovery cancelled with status 16037
05-SEP-12 Log Apply Services 0 128 0 MRP0: Background Media Recovery process shutdown
05-SEP-12 Log Apply Services 0 129 0 Managed Standby Recovery Canceled
05-SEP-12 Network Services 0 130 0 RFS[32]: Possible network disconnect with primary database
05-SEP-12 Log Apply Services 0 131 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 132 0 Attempt to start background Managed Standby Recovery process
05-SEP-12 Log Apply Services 0 133 0 MRP0: Background Managed Standby Recovery process started
05-SEP-12 Log Apply Services 0 134 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 135 0 Media Recovery Waiting for thread 1 sequence 37638 (in transit)
05-SEP-12 Network Services 0 136 0 RFS[33]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 137 0 RFS[35]: Assigned to RFS process 3033
05-SEP-12 Log Apply Services 0 138 16037 MRP0: Background Media Recovery cancelled with status 16037
05-SEP-12 Log Apply Services 0 139 0 MRP0: Background Media Recovery process shutdown
05-SEP-12 Log Apply Services 0 140 0 Managed Standby Recovery Canceled
05-SEP-12 Remote File Server 0 141 0 RFS[36]: Assigned to RFS process 3047
05-SEP-12 Log Apply Services 0 142 0 Attempt to start background Managed Standby Recovery process
05-SEP-12 Log Apply Services 0 143 0 MRP0: Background Managed Standby Recovery process started
05-SEP-12 Log Apply Services 0 144 0 Managed Standby Recovery starting Real Time Apply
05-SEP-12 Log Apply Services 0 145 0 Media Recovery Waiting for thread 1 sequence 37638 (in transit)
05-SEP-12 Network Services 0 146 0 RFS[35]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 147 0 RFS[37]: Assigned to RFS process 3061
05-SEP-12 Network Services 0 148 0 RFS[36]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 149 0 RFS[38]: Assigned to RFS process 3063
05-SEP-12 Remote File Server 0 150 0 RFS[39]: Assigned to RFS process 3065
05-SEP-12 Network Services 0 151 0 RFS[25]: Possible network disconnect with primary database
05-SEP-12 Network Services 0 152 0 RFS[21]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 153 0 Archivelog record exists, but no file is found
05-SEP-12 Remote File Server 0 154 0 RFS[40]: Assigned to RFS process 3067
05-SEP-12 Network Services 0 155 0 RFS[37]: Possible network disconnect with primary database

Firefighter Config change logs / SOD logs are not displayed..

We are on GRC 5.3, SP8. I have configured the SUP and firefighter id's are working fine. However, I am getting the message " No match nor conflict found " when I execute the 'Configuration Change Log report' and 'SOD Violations Report' even though the we changed the configuration and FF id's executed conflicting transactions defined in RAR. ' Log data changes ' box is already activated in the following tables:
1. Configuration (/VIRSA/ZFFCONFIG)
2. Controllers (/VIRSA/ZFFCNTRL)
3. Critical Tcodes (/VIRSA/ZVIRTCODE)
4. Firefighters (/VIRSA/ZFFUSERS)
5. Owners (/VIRSA/ZVIRFFIDS)
6. Reason Codes (/VIRSA/ZFFRCD)
7. Security (/VIRSA/ZVIRFFPWD)
Still the logs are not displayed. Thanks for your help.
Regards,
Raj

Hi Raj,
Can you check the SM37 background job../VIRSA/ZVFATBAK is running or NOT???
Regards'
Gangadhar

I have 111 files to send. Why only 50 files. You are not very smart to do it this way.

I have 111 files to send Why only 50 files. You are not very smart to do it this way.

Hi,
If you want to send more than 50 files, you can zip them up into a single file and send them that way. (Note that zip files aren't previewable by the recipient. They need to be downloaded.)
You might want to check the thread: Re: Is there any way around the limit of 50 files in Adobe Send?
The feedback has been sent to the engineering team to consider.
Regards,
Rave

S660 call logs are not sorted.

I have a S660 smartphone and the call logs are not sorted based on time. It is randomly logged and its difficult to see the call history. Any fix for this?
~Senthil
Solved!
Go to Solution.

I got some alternative solutions..
1. download "Contact plus" app from google play free. This app is fantastic. phonebook, call log and messages contain in this pack. 3-in-one.. start using this app and make it default. it has its own dialer too... so do not have to worry about anything lenovo provided..
2. for those facing "menu" Switch not there issue: kindly download "KK Launcher" by google kitkat team from google play store.. this is the most beautiful launcher and u can forget the lenevo launcher--stupid bastards.. Make this launcher default too.
Remember one thing: do not delete or force stop or dissable the lenevo launcher or other apps by lenovo. just let it be there..do not use that.. thats it..
the above two apps solved 99% of my problems..
bbye...

Archive logs are not transferred to STDBY database

Hi,
I have create a STDBY database (I am running the release 9.2.0.7.0).
I see that the archivelogs are not correctly transferred into STDBY server.
From Primary alert log, I see the following error:
ARC1: Evaluating archive log 1 thread 1 sequence 16734
ARC1: LGWR is actively archiving destination LOG_ARCHIVE_DEST_2
ARC1: Destination LOG_ARCHIVE_DEST_2 archival not expedited
ARC1: Beginning to archive log 1 thread 1 sequence 16734
Creating archive destination LOG_ARCHIVE_DEST_1: '/backup/archivelogs/log1_16734.arc'
ARC1: LGWR is actively archiving destination LOG_ARCHIVE_DEST_2
Invoking non-expedited destination LOG_ARCHIVE_DEST_2 thread 1 sequence 16734 host STDBY_PROD
ARC1: Completed archiving log 1 thread 1 sequence 16734
Thu Nov 17 14:54:42 2011
Errors in file /mnt/orclEBS/oracle/proddb/9.2.0/admin/PROD_ebslive/bdump/prod_arc0_5277.trc:
ORA-03114: not connected to ORACLE
Thu Nov 17 14:54:42 2011
ARC0: FAL archive failed, see trace file.
ARCH: FAL archive failed. Archiver continuing
Thu Nov 17 14:54:42 2011
ORACLE Instance PROD - Archival Error. Archiver continuing.
ARCH: Connecting to console port...
Thu Nov 17 14:54:42 2011
ORA-16055: FAL request rejected
ARCH: Connecting to console port...
Thu Nov 17 14:54:42 2011
Errors in file /mnt/orclEBS/oracle/proddb/9.2.0/admin/PROD_ebslive/bdump/prod_arc0_5277.trc:
ORA-16055: FAL request rejected
ARC0: Begin FAL archive (thread 1 sequence 16483 destination STDBY_PROD)
Creating archive destination LOG_ARCHIVE_DEST_2: 'STDBY_PROD'
Thu Nov 17 15:05:44 2011
LGWR: I/O error 3114 archiving log 2 to 'STDBY_PROD'
Thu Nov 17 15:05:44 2011
Errors in file /mnt/orclEBS/oracle/proddb/9.2.0/admin/PROD_ebslive/bdump/prod_lgwr_5265.trc:
ORA-03114: not connected to ORACLE
Thu Nov 17 15:10:08 2011
Errors in file /mnt/orclEBS/oracle/proddb/9.2.0/admin/PROD_ebslive/bdump/prod_arc0_5277.trc:
ORA-03114: not connected to ORACLE
Thu Nov 17 15:10:08 2011
ARC0: FAL archive failed, see trace file.
ARCH: FAL archive failed. Archiver continuing
Thu Nov 17 15:10:08 2011
ORACLE Instance PROD - Archival Error. Archiver continuing.
ARCH: Connecting to console port...
Thu Nov 17 15:10:08 2011
ORA-16055: FAL request rejected
ARCH: Connecting to console port...
Thu Nov 17 15:10:08 2011
Errors in file /mnt/orclEBS/oracle/proddb/9.2.0/admin/PROD_ebslive/bdump/prod_arc0_5277.trc:
ORA-16055: FAL request rejected
I see that both archiving destinations are VALID:
SQL> select dest_id, dest_name, status from v$archive_dest_status where status != 'INACTIVE';
DEST_ID ---------- DEST_NAME -------------------------------------------------------------------------------- STATUS
1 LOG_ARCHIVE_DEST_1 VALID
2 LOG_ARCHIVE_DEST_2 VALID
SQL>
TNSPING works properly in both directions, e.g. from PROD -> STDBY:
$tnsping STDBY_PROD
TNS Ping Utility for Linux: Version 9.2.0.7.0 - Production on 17-NOV-2011 16:56:40
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
/mnt/orclEBS/oracle/proddb/9.2.0/network/admin/PROD_ebslive/sqlnet_ifile.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp) (HOST=EBSSTDBY) (PORT=1521)) (CONNECT_DATA=(SID=PROD)))
OK (10 msec)
Please help me to solve this issue.
Thank you.

A few notes :
Troubleshooting Tips For Dataguard Switchover (9i and 10gR1) [ID 298986.1]
Although it is about Switchover, it does mandate a password file exclusive. If the switchover requires the password file, shouldn't ARCH shipping require it ?
Step By Step Guide To Create Physical Standby Database Using RMAN [ID 469493.1]
also covers 9i with specific mentions of 9i differences from 10g. Passwordfile is not mentioned as different in 9i from 10g.
Data Guard 9i - Net8 Configuration for a 2-node database environment. [ID 175122.1
has log_archive_dest_2='SERVICE=NODE2STDBY.ACME.COM' so it connects to the service
*However* the document "Introduction to Oracle 9i Data Guard Manager" from
Data Guard 9i Introduction to Data Guard Manager GUI [ID 150217.1]
page 59 has this : "The creation process will attempt to create a remote login password file for the standby database to
enable remote connections to the database. (Note: A remote login password file is not necessary for
Data Guard operation; it is only needed to allow remote connections to the database from clients,
such as other Enterprise Manager tools.)"
Similarly the section "3.2.6 Set Initialization Parameters on a Physical Standby Database"
in the 9i DataGuard manual at http://download.oracle.com/docs/cd/B10501_01/server.920/a96653/create_ps.htm#62941
only has
remote_archive_enable=TRUE
(this is an instance parameter)
Similarly the section "5.8.2.1 Primary Database Initialization Parameters"
at http://download.oracle.com/docs/cd/B10501_01/server.920/a96653/log_transport.htm#1067609
explains
The last parameter, REMOTE_ARCHIVE_ENABLE=SEND, allows the primary database to send redo data to the standby database, but prevents the primary database from receiving redo data from another system.
with REMOTE_ARCHIVE_ENABLE=RECEIVE on the Standby
to Receive and archive the incoming redo data from the primary database, but only while the database is running in the standby role
So, I guess that REMOTE_ARCHIVE_ENABLE is the important one. Not REMOTE_LOGIN_PASSWORDFILE.
In 9i : http://download.oracle.com/docs/cd/B10501_01/server.920/a96536/ch1174.htm#1023087
In 10g it is deprecated : http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams176.htm#sthref541 so that LOG_ARCHIVE_CONFIG is used.
(and no longer appears in the 11.2 Reference)
Hemant K Chitale

FF Logs are not sent to the controllers

Hello SAP Gurus,
We have implemented GRC 10 on SP10, have configured EAM, and the Firefighter logs are populating afte running GRAC_EAM_LOG_SYNC_UPDATE, the notification is sent immediately to the FF owner after the FF ID login, but to trigger the workflow to populate Log reports after executing GRAC_EAM_WORKFLOW_SYNC, the email are not going to the controller, have checked the workflow notiifcation settings, its configured, and the parameters are set to "YES".
The sync job executes only for a second and gives the message as workflow sync is completed, but the email are not sent out.
It was working fine few days ago, but now the job runs only for a sec.
Any help or suggestion would be helpful regarding this?

Hi Alessandro,
Thanks for replying.
The concern is the Workflow ysn was working fine few days ago,where the emails was sent out to the controlers and now seems to be broken, am i missing something on the configuration?
The MSMP for the Firefighter log report is active and generated.
Will apply the below notes , as it seems the notes are not available in the system,
http://service.sap.com/sap/support/notes/1804320
Will keep you posted with the results.
Thanks again.
Regards,
Sindhu

Process chain Logs are not able to view...

Hi Friends,
 We are facing a typical problem like this... We are loading master data weekly thru process chain.. The problem is dat for 5 weeks back we have kept back ground scheduling dat this chain needs to get run for every week.. So for the first week it runned successfully and for the second and third and fourth week also itz runned successfully..
 But on the fifth week we got the process chained failed for some errors in Process chain.. We analyzed the errors and But yet to be rectified.. So for 6th week it needz to get runned.. But when am going to check the logs of dat process chain..
 It was not showing any logs on the chains which have runned successfully for the past 4 weeks also, which have runned successfully... And I tried it in logs with givng today and yesterday and One week and This month and last month and tried it with free date also... BUt am not able 2 see the logs..
Can anyone help me out from this issue..
Thanks & regards
Aluri


Have you tried adding the chain to the RSPCM transaction?
If the chain has run you should be able to see the logs there by selecting the date.
~Nathaniel

Application logs are not getting generated in OIM 9.1.0.2

Hi guys,
We have created schedulers in OIM using OIM api to create,modify and delete the users.All our schedulers working fine.and we are able to do all the opeartions quite some time back.But we are facing an issue where the logs not getting generated when we run the schedulers.But while creating/modifying/deleting users from OIM webconsole we are gettinng the logs.Any help would be appreciated.
Thanks,
Pavan.

Have you configured the logger in your ljava class as well as log.properties of OIM

Archive logs are not transferring to DR server in DataGuard

Dear Gurus,
We have implemented data guard on 10g and it was working properly till last week.All of a sudden it is stopped working and i am getting the error in primary server alert log as
"ORA-12154: TNS:could not resolve the connect identifier specified
PING[ARCr]: Heartbeat failed to connect to standby 'STANDRR1'"
and the trace file entries are as follows
" Error 12154 received logging on to the standby,Error 12154 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'STANDRR1',Error 12154 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'STANDRR1',ORA-12154: TNS:could not resolve the connect identifier specified".
We have changed nothing on either side of the servers.
Please suggest how to resolve the issue and Thanks in advance.
Thanks & Regards,
venkat

Hi,
The output from standby,
lsnrctl servicesLSNRCTL for HPUX: Version 10.2.0.4.0 - Production on 04-FEB-2012 15:50:20
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=PP1.WORLD))
Services Summary...
Service "RR1" has 1 instance(s).
Instance "RR1", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully.
The output of tnsping from standby:
tnsping STANDPP1
TNS Ping Utility for HPUX: Version 10.2.0.4.0 - Production on 04-FEB-2012 15:50:
56
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
/oracle/RR1/102_64/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP
.WORLD) (PROTOCOL = TCP) (HOST = pildrprd) (PORT = 1527))) (CONNECT_DATA = (SID
= RR1) (GLOBAL_NAME = RR1.WORLD)))
OK (10 msec)
The output of tnsping from primary:
tnsping STANDPP1
TNS Ping Utility for HPUX: Version 10.2.0.4.0 - Production on 04-FEB-2012 15:55:
59
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
/oracle/PP1/102_64/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP
.WORLD) (PROTOCOL = TCP) (HOST = pildrprd) (PORT = 1527))) (CONNECT_DATA = (SID
= RR1) (GLOBAL_NAME = RR1.WORLD)))
OK (30 msec).
Still i am getting the error.Please suggest.

My Logs are not appearing -

Hi I am using Iplanet 6 version and deployed a web application.
That web application uses another server called method server to execute method server java classes.
There is log4j.properties file which is creating a log file and writing debug messages from the java classes that are running in method server. But it is not writing the debug messages that are running in Iplanet servlet engine. I added commons-logging.jar and log4j.jar files in Iplanet's class path also. You help is highly appreciated..

Are you getting any error message while writing logs?..
Try to print some statement before and after you write debug statement to the logs and make sure you are successfully executing the log writing statement.

Logs are not archived at Standby site on same server

Hello all,
I am using 11gR2 on Redhat Linux 5
i have a testing to do in which i have created my standby database through rman duplicate command
i have my standby db on the same machine.
my primary database is : prod
standby database is : std
on primary site:
SQL> select database_role,open_mode,name from v$database;
DATABASE_ROLE OPEN_MODE NAME
PRIMARY READ WRITE PROD
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Enabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 53
Next log sequence to archive 55
Current log sequence 55
but the archiving is not being done on standby site it shows the following:
/*SQL> select database_role,open_mode,name,db_unique_name from v$database;
DATABASE_ROLE OPEN_MODE NAME DB_UNIQUE_NAME
PHYSICAL STANDBY MOUNTED PROD std
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Enabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 0
Next log sequence to archive 0
Current log sequence 0
and in alert logfile os standby database its shoing follwoing error
Fatal NI connect error 12543, connecting to:
(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=10.25.217.137)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=prod)(CID=(PROGRAM=oracle)(HOST=sm-alpha)(USER=oracle))))
VERSION INFORMATION:
TNS for Linux: Version 11.2.0.3.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.3.0 - Production
Time: 10-DEC-2012 10:51:10
Tracing not turned on.
Tns error struct:
ns main err code: 12543
TNS-12543: TNS:destination host unreachable
ns secondary err code: 12560
nt main err code: 513
TNS-00513: Destination host unreachable
nt secondary err code: 113
nt OS err code: 0
Fatal NI connect error 12543, connecting to:
(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=10.25.217.137)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=prod)(CID=(PROGRAM=oracle)(HOST=sm-alpha)(USER=oracle))))
VERSION INFORMATION:
TNS for Linux: Version 11.2.0.3.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.3.0 - Production
Time: 10-DEC-2012 10:51:14
Tracing not turned on.
Tns error struct:
ns main err code: 12543
TNS-12543: TNS:destination host unreachable
ns secondary err code: 12560
nt main err code: 513
TNS-00513: Destination host unreachable
nt secondary err code: 113
nt OS err code: 0
Error 12543 received logging on to the standby
FAL[client, MRP0]: Error 12543 connecting to toprod for fetching gap sequence
here is my /etc/hosts
[root@sm-alpha ~]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
10.25.217.137 sm-alpha
and when i ping to sm-alpha
it gives
PING sm-alpha (10.25.217.137) 56(84) bytes of data.
From 10.25.205.117 icmp_seq=1 Destination Host Unreachable
From 10.25.205.117 icmp_seq=2 Destination Host Unreachable
From 10.25.205.117 icmp_seq=3 Destination Host Unreachable
From 10.25.205.117 icmp_seq=4 Destination Host Unreachable
From 10.25.205.117 icmp_seq=5 Destination Host Unreachable
would any one have a kind look at my problem.
thanks

Hi;
You are at wrong forum site. I suggest close your issue here as answered than move your issue Forum Home » High Availability » DATAGUARD which is DG dedicated forum site.
Regard
Helios

Keys are not very responsive

I just bought it and hve only Windows on it and have added facebook. I have found it very slow on the internet and that the keyboard needs a lot of pressure to type.

Dear Customer, Welcome and Thank you for posting your query on HP Support Forum It looks like you are having issues with the Keyboard on your Notebook.We will surely assist you with this. Let’s start with a questions:1. Was there any liquid split on the Notebook Keyboard2. Is there any Dust settled on the Notebook Keyboard3. Are there any Keys which are fallen off / Any Keys which are loose Troubleshooting: Step 01. Click on the Start Button and go to Control PanelStep 02. Open the Device Manager and expand the Keyboard from the listStep 03. Right click on Standard PS/2 Keyboard and click on UninstallNote: This driver will get installed again automatically on your NotebookStep 04. Please turn OFF the NotebookStep 05. Un-plug the Power/AC Adapter and also remove the Battery tooStep 06. Press and Hold the Power Button of the Notebook for a full minuteStep 07. Now let's re-insert the battery back in and plug back the Power/AC AdapterStep 08. Start the Notebook and keep tapping F10 Key during the startup to access the BIOSStep 09. Once you get to the BIOS, Please press F9 or F5 Key[Model specific] to load setup defaults for the BIOSStep 10. Use the arrow keys to say "YES" and hit enterStep 11. Now let's press Esc/Escape Key. Save Changes and Exit - YesStep 11. Now please wait till the Unit loads the Windows Operating system If the issue still persists please check and verify if an External Keyboard works fine with your Notebook Note: Please click on the below shown link to find more troubleshooting stepshttp://h10025.www1.hp.com/ewfrf/wc/document?docname=c03738933&tmp_task=solveCategory&cc=us&dlc=en&lc=en&product=5442782 Hope this helps, for any further queries reply to the post and feel free to join us again **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,K N R KAlthough I am an HP employee, I am speaking for myself and not for HP

Logs are not getting displayed in R/3 for Transaction code NPRT

After doing the initiallisation of setup tables in R/3 for application component 08 (shipment) I am unable to see the log for this init in NPRT but it is pulling the records because I have checked in SE16N and RSA3 .Let me know if can has got a solution for this.

Hi,
Until and unless you have done the setup (not simulation) you cannot find records in NPRT. Also you can check in T-code LBWF for logs.

ISE logs are not very explicit

Similar Messages

Maybe you are looking for