ISO 3rd party Apple service provider in the Inland Empire

ISO 3rd party Apple vendor or savvy Machead who can take out a hard drive from an old MAC G4. Ideas anyone?

Can you be more specific about where you are? Our area (northern Idaho/ western Washington) is called the Inland Empire but I've seen other regions use the same moniker.
Also, G4s are newer than this forum covers and have their own fourm area full of PPC experts. I'm going to ask the Hosts to move your post to the PowerMac forums (assuming you have a PowerMac G4 tower or Cube, and not a PowerBook, iMac, eMac, iBook, or other G4 variant.)
The forum you found gets painfully little traffic.
Here are Apple instructions from replacing a hard drive that cover most PowerMac G4s:
http://support.apple.com/kb/HT1815

Similar Messages

Is Apple providing any karaoke service such as selling karaoke software, whole set of karaoke hardware or even karaoke store? If yes, please give me information on this; If no, let me know if there are similar karaoke services providing in the future.

Is Apple providing any karaoke service such as selling karaoke software, whole set of karaoke hardware or even karaoke store? If yes, please give me information on this; If no, let me know if there are similar karaoke services providing in the future.

No, Apple does not. What other companies might provide what you're looking for I don't know. Try searching the web for "karaoke software" or something similar.
Regards.

Is this the NVIDEA problem.... frustration with Apple service provider

So I got this MacBook Pro and it would only come up with kernel panic, no log in, nothing. I thought it was the hard drive and replaced it with a new drive, didn't change a thing. Tried booting from CD, tried booting from the USB drive, same thing. But eventually after a few tries it WOULD boot into Ubuntu from the CD, although the graphics looks really funny (vertical lines, poor resolution). Then, I got it to boot into Ubuntu again and the graphics looked normal. Then, I got it to boot into the Snow Leopard install and got almost through the whole install, and suddenly, kernel panic again. Rebooted, it appeared to work fine for about a half hour. But suddenly out of the blue, the screen started flickering like when a ballast gets blown on a fluorescent light, and then after a few moments, kernel panic. This happened more than once. So now, knowing it isn't the hard drive, and I also swapped out the RAM and it did the same thing no matter which RAM was in it, that narrows it down to an issue with the logic board. Lo and behold, I found out about this Nvidea recall and my Macbook is one of the ones with the affected graphics processors. So I paid $40 to ship it up to an Apple service provider (there are none near me) and they are saying that it passed the diagnostic no problem, and the problem is a bad hard drive. Which I know is not true because when it decides not to boot, it won't boot from ANYTHING. Then other times it will appear to boot and run just fine until the screen flashes and then it goes into a kernel panic. What do I do??? What could this problem possibly be???

Welcome to Apple Discussions!
They call the program an exchange/repair program. Call Apple support:
1-800-263-3394
And tell them what you ran through and that you believe your machine to be part of the exchange/repair program on knowledgebase artice:
TS2377

Consuming 3rd party web service in Java web dynpro application

Hi All,
I am working on a scenario where external(3rd party) web service has to be consumed in WD Java application. I am provided with WSDL file. Let me explain how I usually consume other webservices:
     Create model->AWS model->Remote Location/file System->provide url->create/choose service group->finish
     Then I would generate the code in custom controller by applying template
      I assign provider system as local for the service group in nwa.
This is normal process to me. I am struck with this 3rd party web service. Please share your ideas on the same. Any help is highly appreciated.
BR,
Manoj

I ve created a provider system pointing to where 3rd party WS resides. i am trying to connect through WSIL. While pinging that provider system, I don't see that particular WS(that I am gonna consume). And while assigning this Provider system to service group, processing state getting 'Failed'.
What could be reason?

3rd Party Web Service Integration

I am a complete beginner with SAP Process Integration. I could do with a simple 'To Do' List on what I should do and in what order to do it so that I can 'talk' to external 3rd party web service. In a nutshell, I will be using 3rd party web service to create document for eventual printing, so I will need to populate XML with various database fields. I have been provided with the WSDL files for the web service.
Appreciate any help, o matter how small.

Hi Huw,
Please have a look at the following links and see if it helps you.
Re: communicating with a 3rd party system using webservices
calling external web service from ABAP Program
Re: Web service & Soap adapter Examples
Best Regards

E-Recruitment Third Party Internet Service provider

Hi Experts
I am implementing e-Recruitment 3.0 at one of client site. Here we are looking out for integration with the third party internet service provider i.e. job sites. Wherein we will able to surf and search external job site for the suitable resume based on the requirement. These requiremnts are defined in e-Recruitment thru Requisition.
Based on the requisition, we will be search the resume and upload the same into e-Recruitment.
In normal e-Recruitment their is no node for integration with the external service provider.
I am not getting the proper trigger to reach the integration part.
Has anybody done this...?? If yes how did you do it..??
Regards,
Anand

hello anand,
let us take this step by steb ok :
1. in e-rec 3 there is no functionality for integration with 3rd party service provider.
2. there is a new role for teh above in ERP2005/ecc6...but I think this role is more for a headhunter to supply resumes of candidates online to your organisation
3. coming to your requirement, if you have enterprise portal I suggest that :
a. get the external service provider's link on to ure portal content (an MOU kinda doc needs to be signed between the 2 parties)
b. then the requestor can search cv's based on the requirement (this still does not solve the issue of integration between your requirements-in-requisition and the content of the service provider)here u have to remember that trex is solely for your e-rec instance only and and cannot be used to ''search'' a service providers content unless the content is already in your e-rec system, which can be achieved by point-c below.
c.in e-rec 3, the alternative I have found was modifying the external candidate bsp page to remove all links except the part where ther profile is uploaded, and creating a unique identifier for all such headhunters to identify the resumes from each of them respectively, and allow access to the custom page thru internet. This worked fine for me,... but a lot still depends on ure client's requirements.
hope the above works for you,.. in any case let me know how u solved the situation
ciao
ganti.

I have a MacBook Pro laptop purchased in June 2011, and the superdrive no longer works. Rather than have it replaced, I'll buy a 3rd party superdrive that plugs into the USB port. Does it need it's own power source, or will the USB port suffice?

I have a MacBook Pro laptop purchased in June 2011, and the superdrive no longer works. Rather than have it replaced, I'll buy a 3rd party superdrive that plugs into the USB port. Does the external superdrive need it's own power source, or will the USB port provide enough power?

The Apple external SuperDrive actually exceeds the allowed power draw. Because of this, it is only trouble-free on certain models that accommodate this excess.
All others require an external Power source.

How can i complain from apple service provider?

How can i complain from apple service provider?

khangostar wrote:
How can i complain from apple service provider?
If you mean an Apple Retail Store, speak to the store manager of that location.
If you mean an Apple Authorized Service provider, speak to the store manager of that location.
If you mean your wireless carrier/cellular provider, go to a store and speak to the store manager of that location, or call the carrier and ask for Customer Relations.
If you mean Apple Support, call Apple and speak to Customer Relations.

Need to restart OAS server to find a 3rd party Web Service

Hi everyone,
I have the following problem. I am using Oracle Application Server 10g (version 10.1.2.0.2).
I have deployed a J2EE web service to this App Server and from within this service I call a 3rd party Web Service (.NET) to a remote system. It works fine.
However when the remote server for some reason restarts my web service noway can find the remote web service. I get a connection timeout exception to my logs.
With a standalone client that I have to the same machine where the Oracle Application Server is installed I can call directly the 3rd party web service with no problems at any time so I am sure that there is no connection problem.
If I restart the Oracle Application server then the J2EE web service finds the remote web service again.
This means that whenever the remote server falls and recovers I will need to restart my Oracle Application Server as well, to let my web service find the remote web service. Crazy isn't it?
Does anyone knows what happens??
Thanks

Hi everyone,
I have the following problem. I am using Oracle Application Server 10g (version 10.1.2.0.2).
I have deployed a J2EE web service to this App Server and from within this service I call a 3rd party Web Service (.NET) to a remote system. It works fine.
However when the remote server for some reason restarts my web service noway can find the remote web service. I get a connection timeout exception to my logs.
With a standalone client that I have to the same machine where the Oracle Application Server is installed I can call directly the 3rd party web service with no problems at any time so I am sure that there is no connection problem.
If I restart the Oracle Application server then the J2EE web service finds the remote web service again.
This means that whenever the remote server falls and recovers I will need to restart my Oracle Application Server as well, to let my web service find the remote web service. Crazy isn't it?
Does anyone knows what happens??
Thanks

Call 3rd party web service from OAS J2ee application.

Hi everyone,
I have the following problem. I am using Oracle Application Server 10g (version 10.1.2.0.2).
I have deployed a J2EE web service to this App Server and from within this service I call a 3rd party Web Service (.NET) to a remote system. It works fine.
However when the remote server for some reason restarts my web service noway can find the remote web service. I get a connection timeout exception to my logs.
With a standalone client that I have to the same machine where the Oracle Application Server is installed I can call directly the 3rd party web service with no problems at any time so I am sure that there is no connection problem.
If I restart the Oracle Application server then the J2EE web service finds the remote web service again.
This means that whenever the remote server falls and recovers I will need to restart my Oracle Application Server as well, to let my web service find the remote web service. Crazy isn't it?
Does anyone knows what happens??
Thanks

All depends on the service. You can not just access a service. You need things like if the data is JSONP or if they have instructions or keys etc. You need to just follow the instructions the service will offer on how to connect to it.

Apple Service Provider Rip off!!

Locked by an Apple Discussions Host
Unless otherwise noted, your Submission should either be a technical support question or a technical support answer.
$320 is what I got quoted from a local Apple Service provider/reseller to purchase and install the Airport/Bluetooth combo card for my computer. This upgrade is for my Quad 2.5 which does not take the regular Airport or Bluetooth upgrades. I have heard other say they paid only $100 or so for this upgrade. Seeking advice from anyone who has had Airport or bluetooth installed after purchase.

Yes I am aware of those options but I would much prefer the Apple internal option. I also have to take my machine in anyway for an issue with the rear exhaust fan making excessive noise so I figured it would be a good time to install the Airport/Bluetooth combo card plus I don't want to void my warranty.
I am much more concerned with the price that the reseller/service provider quoted. I googled and found the Combo card for $99 at J&R.com
http://www.jr.com/JRProductPage.process?Product_Id=4069415&JRSource=google.dataf eed.APP+MA252G%2FA
So I don't see why they are trying to charge me $320.00. $200.00 in labor is nuts for something that should take 15 minutes. I also have a feeling that the Service provider had no idea what they were talking about. Actually they did'nt becuase they did'nt even know what I was talking about when I asked for the Upgrade. So hence the original question of wanting to find others who have installed the Card after purchase either through a reseller or an Apple Store.
I tried contacting AppleCare about the price but they are clueless and told me to go to an Apple Retail store. I went to my local Apple Retail store but the wait time to see a Genius was over an hour. I don't have that kind of time.

My mac book was refused by the apple service center as the mother board was crashed , pls help me what to do

my mac book was refused by the apple service center as the mother board was crashed , pls help me what to do

If you live in a big city, then I would recommend an independent computer store that fixes Macs. There are many mom and pop computer stores that fix your computer. Just Google it.

HT1515 My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?

My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?

Wirelessly
Just select the option to make your AirPort Express join an existing network in the setup process

1)    Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?       i. The list of the modules that are being managed by SAP Solution Manager(s)      ii. The performance metrics of those modules/components at th

1)
Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?
i. The list of the modules that are being managed by SAP Solution Manager(s)
ii. The performance metrics of those modules/components at the high level
iii. The information about Early Watch Alerts (or situations to watch for)
2)
Is there a full SNMP interface for getting the above information from SAP Solution Manager?
3)
Is that understanding that SAP has SNMP support for forwarding alerts to a 3rd party system, correct?
4)
Does SAP has both free and licensed? If yes then what are the advantages of licensed over the open/free version?

Mugunthan
Yes we have applied 11i.AZ.H.2. I am getting several errors still that we trying to resolve
One of them is
===========>>>
Uploading snapshot to central instance failed, with 3 different messages
Error: An invalid status '-1' was passed to fnd_concurrent.set_completion_status. The valid statuses are: 'NORMAL', 'WARNING', 'ERROR'FND     at oracle.apps.az.r12.util.XmlTransmorpher.<init>(XmlTransmorpher.java:301)
     at oracle.apps.az.r12.extractor.cpserver.APIExtractor.insertGenericSelectionSet(APIExtractor.java:231)
please assist.
regards
girish

Defaulting the Service Provider for the receipts pulled from credit card

Hi,
When the Associate goes on a business trip , some of the expenses are processed through the AMEX corporate credit card. Using a custom PRCC , these credit card transactions are uploaded into the system and are available as buffer during the trip creation. Associates creates the trip using ESS Portal. When the Associate selects the expense from the credit card buffer , we want the Service Provider to be defaulted to AX (AMEX). The service provider code for AMEX is configured as AX.
In the following configuration (Travel Expenses->Master Data->Credit Card Clearing->Define Assignment Table for Credit Card Clearing , we updated the Service Provider as AX for all the expense types related to AMEX.
Now we notice that AX is not defaulted in the Service Provider when the Associates pulls the expense from the AMEX credit card buffer.
Is there a way to default the service provider for all the expenses pulled from the credit card buffer?
Thanks
Sukumar

Hi Nandagopal,
You are right that the origin column has Amex logo when selected from the Buffer. We are using Service provider in determining who the payment should go to. If the expense is from the credit card buffer , the payment should go to AMEX directly. If the expense is non-AMEX (i.e manual entry and not from buffer) , then the payment will go to the employee themselves. Different wage types are determined based on the Service Provider for the same expense type. For example for expense type ACAR (Rental) , if the Service Provider is AX , then wage type say WJ67 is selected by the system . For expense type ACAR and no Service provider , then wage type WJ17 is derived. The accounting is determined based on the wage type.
So Service Provider is one of the key field that determines the accounting. When the associate selects from credit card buffer , the associate should also select the service provider as AX so that payment goes to AMEX. If the Associate forgets to select the service provider , then the payment goes to the Employee. Then the employee has to pay AMEX separately. In order to avoid this, we want to default the service provider as AX when the associate pulls from the credit card buffer.
We maintained the default service provider as AX for AMEX credit card clearing in img node Travel Expenses->Master Data->Credit Card Clearing->Define Assignment Table for Credit Card clearing. In this node we link the credit card company transaction keys to SAP expense type and you have the option to select the Service Provider. But his default is not working in Portal.
Please let me know if this default setting should work.
Thanks
Sukumar

ISO 3rd party Apple service provider in the Inland Empire

Similar Messages

Maybe you are looking for