ISR, SCENARIO_SET_ADDITIONAL_VALUES, drop down does't drop down

adobe livecycle designer 7.0
sap_basis 640, support pack level 18
We're implementing E-Recruitment.  This question is regarding the Personnel Requistion that runs in MSS.
I've created a BAdI to customize my field values used in the Adobe Form.
INT_SERVICE_REQUEST_INIT works perfect, my fields all contain the correct data when the form is executed through MSS.
I've added a field to the form using the "ISR DDL no element preselected" from the Library in the ISR Controls tab.
I've bound this field to my custom field.
I've added code to populate ADDITIONAL_DATA in SCENARIO_SET_ADDITIONAL_VALUES.
I've added the KEY and LABEL field names in the "settings for input help" in the appropriate characteristic in the scenario definition.
When I click on the drop down field in the form, nothing happens.
When I test the function directly in SE37 it works correctly.
What am I missing in my setup?

Lori,
Key items for DDL are BADI method and binding
1. As mentioned by Raja,
Make sure BADI method SCENARIO_SET_ADDITIONAL_VALUES is being exectued.
2. Make sure in DDL field attributes in binding tab you have defined value list attributes.
See "B. van Prooijen"  response in
Native WD  Drop-Down list
thanks
sridhar

Similar Messages

  • Cisco 881 ISR IPSec VPN Tunnel does not pass traffic from the vlan.

    I have a cisco 881 ISR Router with a site-to-site IPsec vpn tunnel to a mikrotik device on the other end (I inherited this from my client). The tunnel is constructed properly and is up, however traffic does not pass or get routed to the FA4 interface. I see in my packet captures that it hits the vlan1 interface (vlans are required on the L2 ports) and does not pass to the tunnel.
    This is my configuration:
    141Kerioth#sh config
    Using 3763 out of 262136 bytes
    ! Last configuration change at 01:02:41 UTC Mon May 26 2014 by admin
    version 15.2
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname 141Kerioth
    boot-start-marker
    boot-end-marker
    logging buffered 51200 warnings
    aaa new-model
    141Kerioth#do wr mem
                  ^
    % Invalid input detected at '^' marker.
    141Kerioth#wr mem
    Building configuration...
    [OK]
    141Kerioth#sh run
    Building configuration...
    Current configuration : 5053 bytes
    ! Last configuration change at 01:38:06 UTC Mon May 26 2014 by admin
    version 15.2
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname 141Kerioth
    boot-start-marker
    boot-end-marker
    logging buffered 51200 warnings
    aaa new-model
    aaa authentication login default local
    aaa authentication ppp default local
    aaa session-id common
    memory-size iomem 10
    crypto pki trustpoint TP-self-signed-580381394
     enrollment selfsigned
     subject-name cn=IOS-Self-Signed-Certificate-580381394
     revocation-check none
     rsakeypair TP-self-signed-580381394
    crypto pki certificate chain TP-self-signed-580381394
     certificate self-signed 01
      30820229 30820192 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
      30312E30 2C060355 04031325 494F532D 53656C66 2D536967 6E65642D 43657274
      69666963 6174652D 35383033 38313339 34301E17 0D313430 35323231 38323333
      365A170D 32303031 30313030 30303030 5A303031 2E302C06 03550403 1325494F
      532D5365 6C662D53 69676E65 642D4365 72746966 69636174 652D3538 30333831
      33393430 819F300D 06092A86 4886F70D 01010105 0003818D 00308189 02818100
      B001A012 2CA6970C 0648798B 2A786704 84F2D989 83974B19 9B4287F2 4503D2C9
      173F23C4 FF34D160 202A7565 4A1CE08B 60B3ADAE 6E19EE6E 9CD39E72 71F9650E
      930F22FE C4441F9C 2D7DD420 71F75DFC 3CCAC94E BA304685 E0E62658 A3E8D01C
      D01D7D6A 5AF0B0E6 3CF6AF3A B7E51F83 9BF6D38E 65254E1F 71369718 ADADD691
      02030100 01A35330 51300F06 03551D13 0101FF04 05300301 01FF301F 0603551D
      23041830 168014D6 24878F12 1FFADF2F 537A438E 6DD7FB6B D79E4130 1D060355
      1D0E0416 0414D624 878F121F FADF2F53 7A438E6D D7FB6BD7 9E41300D 06092A86
      4886F70D 01010505 00038181 00771667 FCA66002 8AB9E5FB F210012F C50B586F
      9A9640BB 45B4CEFD 030A38C0 E610AAC8 B41EF3C4 E55810F9 B2C727CF C1DEFCF1
      0846E7BC 1D95420E 5DADB5F8 EFE7EB37 B5433B80 4FF787D4 B1F2A527 06F065A4
      00522E97 A9D2335C E83C4AE1 E68D7A41 9D0046A7 ADCC282B 7527F84D E71CC567
      14EF37EA 15E57AD0 3C5D01F3 EF
            quit
    ip dhcp excluded-address 10.0.16.1
    ip dhcp pool ccp-pool
     import all
     network 10.0.16.0 255.255.255.0
     default-router 10.0.16.1
     dns-server 8.8.8.8
     lease 0 2
    ip domain name kerioth.com
    ip host hostname.domain z.z.z.z
    ip name-server 8.8.8.8
    ip name-server 4.2.2.2
    ip cef
    no ipv6 cef
    license udi pid CISCO881-K9 sn FTX180483DD
    username admin privilege 15 secret 4 CmmfIy.RPySmo4Q2gEIZ2jlr3J.bTBAszoe5Bry0z4c
    username meadowbrook privilege 0 password 0 $8UBr#Ux
    username meadowbrook autocommand exit
    policy-map type inspect outbound-policy
    crypto isakmp policy 1
     encr 3des
     authentication pre-share
     group 5
    crypto isakmp key 141Township address z.z.z.z
    crypto isakmp keepalive 10
    crypto ipsec transform-set TS esp-3des esp-sha-hmac
     mode tunnel
    crypto map mymap 10 ipsec-isakmp
     set peer z.z.z.z
     set transform-set TS
     match address 115
    interface Loopback0
     no ip address
    interface Tunnel1
     no ip address
    interface FastEthernet0
     no ip address
    interface FastEthernet1
     no ip address
    interface FastEthernet2
     no ip address
    interface FastEthernet3
     no ip address
    interface FastEthernet4
     description $FW_OUTSIDE_WAN$
     ip address 50.y.y.y 255.255.255.240
     ip nat outside
     ip virtual-reassembly in
     duplex auto
     speed auto
     crypto map mymap
    interface Vlan1
     description $ETH_LAN$
     ip address 10.0.16.1 255.255.255.0
     ip nat inside
     ip virtual-reassembly in
     ip tcp adjust-mss 1452
    ip forward-protocol nd
    ip http server
    ip http access-class 23
    ip http authentication local
    ip http secure-server
    ip http timeout-policy idle 60 life 86400 requests 10000
    ip nat inside source list 115 interface Vlan1 overload
    ip nat inside source list 199 interface FastEthernet4 overload
    ip nat inside source route-map nonat interface FastEthernet4 overload
    ip route 0.0.0.0 0.0.0.0 50.x.x.x
    access-list 110 deny   ip 10.0.16.0 0.0.0.255 10.0.1.0 0.0.0.255
    access-list 110 permit ip 10.0.16.0 0.0.0.255 any
    access-list 115 permit ip 10.0.16.0 0.0.0.255 10.0.1.0 0.0.0.255
    access-list 144 permit icmp host c.c.c.c host 10.0.1.50
    access-list 144 permit icmp host p.p.p.p host 10.0.16.105
    access-list 199 permit ip a.a.a.a 0.0.0.255 any
    no cdp run
    route-map nonat permit 10
     match ip address 100
    line con 0
     no modem enable
    line aux 0
    line vty 0 4
     access-class 1 in
     exec-timeout 30 0
     privilege level 15
     transport preferred ssh
     transport input ssh
    line vty 5 15
     access-class 23 in
     privilege level 15
     transport input telnet ssh
    cns trusted-server all-agents x.x.x.x
    cns trusted-server all-agents hostname
    cns trusted-server all-agents hostname.domain
    cns id hardware-serial
    cns id hardware-serial event
    cns id hardware-serial image
    cns event hostname.domain 11011
    cns config initial hostname.domain 80
    cns config partial hostname.domain 80
    cns exec 80
    end

    Why do you have following command on the PIX?
    crypto map outside_map 40 set transform-set 165.228.x.x
    Also you have this transform set on the PIX:
    crypto ipsec transform-set 10.112.60.0 esp-aes-256 esp-sha-hmac
    This does not match the transfor set on the router:
    crypto ipsec transform-set tritest esp-3des esp-md5-hmac
    Where are you using the access-list/route-map
    101 ?

  • MENU item selection does not display drop down in ITS enabled transaction

    Hello,
    We are experiencing a strange behavior between two portal env.
    1. DEV.
    For example we have transaction MM01 display in the Portal via ITS (integrated). The end user can select the Menu Tab and the System Tab and the drop downs appear as expected.
    2. Prod
    Same  scenario as above. Only this time, end user is unable to select the button. The Menu and System Tab dont appear greyed out but selecting it does not display the drop down.
    Material, Edit GoTo Defaults are some of the links under the Menu tab for MM01.
    Very confusing. And this is the behavior in Prod for all transactions. Any ideas on why this is happening would be greatly appreciated.
    The architectural difference is that DEV has no Web Dispatcher versus Prod has the Web Dispatcher.
    We are on EP 7.0
    Many thanks.
    Regards,
    Sunil

    Thanks. Now, I realise this may cause dismay to some, but I have now solved the problem, and just wanted to share my experience with those even less savvy than myself. In Dreamweaver, the Spry css styles are arranged with little or no hint as to which style controls what. I found that there is a rule in the sub-menu styles that controls the little graphic arrows which indicate that there are dropdown subs under the tabs. I had removed these arrows to make way for my background images. However, the rules that control their positioning by percentage were still there, causing my images to display incorrectly. Of course, there was no way anyone could have spotted this and helped me as the fault was in the external spry css file, not the page code. So many thanks to vw2ureg for looking anyway. Regarding the page code, which you have flagged up, would you mind elaborating on what you see wrong here? I'm none the wiser. Many thanks again.

  • Master Password Feature: After sometime (10-15 min.) the drop down list for the field on any site does not show; opening new window (not refresh or new tab) drop down appears.?

    I manage a ton of accounts for different customers suing the same login pages (GoDaddy, WordPress, etc.) I use the Master Password Feature to help keep track of the many variants in logins and passwords.
    After some unknown period of time, even closing the page tab so a new page session is started at the remote server, Firefox does not provide me with the usual drop-down selection list of the previously used login names. However, if I open a new FF window (file/new window) from the menu bar, the drop down becomes available.
    How can I refresh the original window session in FF or change the timeout length?

    Well, you said LOV...that might mean you are using JDev 11g. Are you? If so what technology stack are you using?
    Assuming you are using JSF (?) you might be "backing" your list component in the application scope...but that is not likely.
    If you are using ADF/BC on your business component level, you can clear your view object from which you are querying the possible values of this list...unless your you have made a method to compile this list...in which case you know what you are doing...so that is probably not the case.
    Essentially you want to requery the VO upon which your LOV is based...unless you are using JPA or something...and then I know "requery" is not the right word...is it?

  • Autocomplete does not work (no drop-down-menu)

    Hi all
    I'm trying to setup the autocomplete-input, but it doesn't
    work. When I type anything into the textbox, the animated image
    beside the box shows activity and I see the submitted data from the
    backend in debug mode, but the drop-down-menu with the matching
    records does not appear.
    if I build a static list of possible choices in the
    cfinput-tag, it works.
    my cfc returns an array and this is serialized as JSON in the
    calling backend-template (see code below). In source code view of
    the html-page, I see lots of java-script and CSS inserted into the
    page.
    any ideas?
    stefan
    calling template:
    <cfsilent>
    <cfscript>
    //Get Query
    locationArray =
    application.addressDao.findLocation(url.term);
    </cfscript>
    </cfsilent>
    <cfoutput>#serializeJSON(locationArray)#</cfoutput>
    relevant part of CFC:
    <cfloop query="qLocations">
    <cfset arrayAppend(records, fPLZ & " " &
    fOrtschaft)>
    </cfloop>
    <cfreturn records/>
    form-page:
    <cfform action="" method="post" name="editForm"
    id="editForm">
    Dynamische Auswahlliste: <br />
    <cfinput type="text" name="ziplocation"
    autosuggest="url:ajaxLocationAutoComplete.cfm?term={cfautosuggestvalue}"
    autosuggestMinLength="3" maxResultsDisplay="10"><br
    />
    <br />
    </cfform>

    Rather a general answer I am afraid, as I can not see an obvious problem & solution:
    # Note for any one off problems with sites it is always worth clearing cookies for that site and cache [[How to clear the Firefox cache]] &[[Delete cookies to remove the information websites have stored on your computer]]
    # Try in safemode (see [[Troubleshoot Firefox issues using Safe Mode]]) that is accessible from your Firefox Button. (but at this stage do not yet try the reset)
    #* next try in safemode and also disable the java plugin that you have (Safe mode disables extensions not plugins)
    #* for info: note Java and Javascript are different animals: http://kb.mozillazine.org/JavaScript_is_not_Java
    # if the above do not help then try the Firefox reset, '''but''' be aware you will loose open tabs, extensions, and certain preferences, you may need to bookmark things first so you can find them again see [[Reset Firefox – easily fix most problems]]

  • TS3276 the images (attachments) are automatically resized (smaller) when I send them to a customer. My email screen does not show a drop down menu box where you can leave as actual size. Is there a setting elsewhere that can be set.

    Any suggestions on problem I have. I receive images, say a file that is 3 mgs through email on Safari mail and when I try to resend it or forward it or any other larger file, when it sends the file is reduced by about 1/3. My screen does not show and drop down menu with a feature to keep actual size or reduce that is suggested when I looked up solutions to the problem.  I can't find a setting anywhere in mail that I can change to make sure my files are kept at actual size. I figure a setting got changed -don't know how - but it happened about a month ago. Caused problems as I work in graphics can't send files to clients as they come out too small. Any suggestions on how to fix.
    Thanks

    What email program are you using? And what do you mean by "Safari mail"?

  • My unsorted bookmarks folder does not appear in the bookmarks drop down menu.

    My unsorted bookmarks folder does not appear in the bookmarks drop down menu. I can only reach it though Organize Bookmarks function. How do I get it into the bookmarks tree?

    Unsorted Bookmarks Folder Menu: https://addons.mozilla.org/firefox/addon/7269/

  • In attempting to sync my Outlook Contacts to my iphone 5, Outlook shows in the drop down, but it does not allow click-on, then below is listed only my email information, nothing else, no calendars, contacts.  When I click on the email, it adds new acct

    In attempting to sync my Outlook Contacts to my new iphone 5,in iTunes,  Outlook shows in the drop-down box, but it does not allow click-on.  Individual items are not listed to click on. The only listing is my email address and when you sync it, it really does not sync, it adds another email account with the same name, and no contacts sync with it.

    also - when I use camera wizard it just tells me the phone is busy or in use  and I should retry.
    If I use it through windoes explorer - it shows me the camera to computer symbols and a line moving between then but bombs out saying camera is busy.

  • The drop-down list that appears when typing in the Google search bar doesn't work. Clicking on an item on that list does nothing. This very useful feature is broken.

    I just installed FireFox 4. In previous versions typing in the Google search box automatically created a drop-down list of items. One could click on an item on the list and proceed to a Google results page. In FireFox 4, the list appears but clicking on an item on the drop-down menu does nothing. It's broken and it was a very useful feature in previous versions.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • I would select a link from the drop down on the address bar but the page would not open. I would select it again but the page does not open. I could only reach website by selecting google on most visited list.

    After updating AVG anti-virus, I encountered a problem on Firefox. I would select a link from the drop down on the address bar but the page would not open after clicking on it. I would select it again, even double click, but the page does not open. I could only reach website by selecting google or yahoo from my dropdown on the most visited list and then click the website that I want to visit. I would like to do this in one step by just selecting a link from my history on the address bar and select a link instead of going to google and then writing the page I want to visit. What could be the problem? When going to the address bar to select a link to open, why does the site not open? Any help would be appreciated.

    Hi,
    Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
    [http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

  • Search Item drop-down does not show any data for Advanced Search.

    Hi,
    I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
    1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
    2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
    3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
    Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
    I am using OAF version 12.1.1.
    Thanks, Suresh

    Hi,
    I faced the same situation but i still waiting for the solution.. this is my problem's thread..
    Addition of LOV Search Filter using Personalization
    But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
    I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
    Thanks
    Renu

  • Detail region does not refresh when selecting from a drop-down list in master region

    I am using DW CS3 and have updated to version 1.6.1 of Spry.  Using an XML dataset, I am able to create a Spry table as the master region that links to a detail region that displays a small JPG graphic.  It works fine in this format (clicking on a row displays the correct graphic).  However, my table has 80 rows and requires the user to do too much scrolling. So I changed the master region to a drop-down repeat list, but the graphic does not change when a new selection is made in the drop down list.  Listed below is the code produced when I used the insert Spry Repeat List.  I got the same results when adding a spry:setrow="dsChartNurse".  I also tried -- onclick="dsChartNurse.setCurrentRow('{ds_RowID}');" -- which again made no difference.
    When I removed children from the spry:repeat, the master region displayed as a two column list of all 80 items in a drop-down list format.
    <div spry:region="dsChartNurse">
           <select name="select" spry:repeatchildren="dsChartNurse">
             <option value="{name}">{name}</option>
           </select>
    </div>
    <div id="image" spry:detailregion="dsChartNurse">
       <img src="{dataimage}" align="center" style="margin:50px 0 0 0"width="320" height="164" />
    </div>
    Thanks so much to anyone who can help correct my code in order to have a drop-down list display information correctly in the detail region.

    Thanks for the quick reply.  I did solve the problem I was having by changing from onclick to onchange in the master region.  But, now I have another problem with, of course, IE.  I just put in online at http://www.minursemap.org/ageDistNurse.html.  When opened in IE, the drop down list displays the last entry, but the image is for the first in the list.  Thanks again for your help.

  • Created a new folder in bookmarks; when try to add new bookmark, new folder does not appear in drop down menu; using safari for windows

    created a new folder in bookmarks; when try to add new bookmark, new folder does not appear in drop down menu; using safari for windows

    You are using an older version of firefox, upgrade your browser to Firefox 8 and try
    * getfirefox.com

  • I modified the budget categories on the numbers template so now the transaction tab does not communicate with the budget tab. I figured out how to change the drop down options but how do I get it to reflect on my budget sheet? Please help.

    If you are familar with the Numbers Budget Template it has two tabs 'Budget' and 'Transactions'. If you use the template as it is designed when you input expenses on the transaction tab it will automatically add that amount into the selected category on the budget tab. I have madified my budget tab to reflect the caegories that I need, which included adding several to the template. I also added to the table so it reflects my income and expenses so I can track where I am at with a glance. Since I did this, I can't get my transactions tab to communicate with the budget tab. I figured out how to change the options in the drop down box for category but I con't figure out how to get it to reflect onto my budget tab. I'm sure that it is an easy fix, however, I am just not well versed in Numbers. I appreciate your time in helping me with this issue.
    Respectfully,
    Jon

    My guess is that while you added catetories to your Budget Sheet by adding new lines and filling in the category column, you didn't also add the formulas to these new budget lines.
    The proper way to add those lines would have been to select a cell in the line just above where you want to add a line and type Option/Alt-DownArrow. This would have copied the formulas into the new line. Maybe you did this, and maybe not. You didn't give details on how you added the lines.
    Select C2 and D2 and Command-C to copy them to the Clipboard.
    Select all the cells of Columns C and D except for the top and bottom rows and Command-V to Paste.
    If I have properly guessed the problem, you should be in business. This assumes that your Categories are exaclty the same as the entries in your Pop-up menus. Spelling counts, as does case.
    Jerry

  • Acrobat Reader is not properly displaying dynamic drop down when LiveCycle does

    I have a sample file that loads a drop down menu from an xml file. This form works fine in the preview pane of LiveCycle. I see the values properly populated. When I attempt to load the same file with Acrobat Reader the drop down menu shows up empty. I have saved the document as a Dynamic PDF. This happens with both Reader 8.0 and 7.0 on two different machines. Am I doing something wrong? Is this a known issue?

    How are you merging the data to the form before viewing in Reader? Using the Preview in Designer allows you to pass xml data when rendering the PDF but when you save out a PDF Form from Designer the data is not part of the form. And without Reader extending the form (or using Acrobat Pro) you have no way of pulling in the xml data so that the drop down can populate.

Maybe you are looking for