Issue about IDoc Adapter Receiver Channel's Performance

Hi Everyone,
Currently, I am working on a scenario of File -Integration Process - IDoc in XI 3.0 with patch level 16. The scenario works fine when it process one/two/three files in parallel, and the IDocs arrive R/3 system quite fast. But when I try four files in parallel, the whole XI server blocks, I can not do anything even logon Integration Builder, and the IDocs arrive R/3 brokenly, sometime with the invterval to 10 minutes. When the XI comes back, I found all the four integration processes finish successfully and each transaction works fine and fast. What's more, after I change the IDoc Adapter receiver channel to a File Adapter receiver channel, it works fine for even 20 files in parallel. So I think it is some issue about IDoc Adapter receiver channel. Does anyone have the same experience as me? Any comments will be appreciate.
Regards,
Nick

Hi Nick,
Can you check this Blog-
/people/sreekanth.babu2/blog/2005/01/05/delayed-xi-message-processing
May be useful.
How are you picking the files .. You can try with EOIO options while picking the file.
But if you use BPM, it is not applicable. It will act as a EO only.
Check this SAP Note- 833740
Thanks,
Moorthy

Similar Messages

File adapter receiver channel is not initialized.

Hi
iam wrking idoc-file scenario, as per the requirement i have created 4datatypes 4 mapping in IR with 4 communaction chanles in ID. the scenarios is working fine with 3 mappings.but in 4 the scenario
the file genaraing properly , i have cheked in SXMB_moni payload but it is not creating in destination system
in runtimeworkbench->message-monitaring-> adpater
i have find the below issues
1) File adapter receiver channel CC_DDPWCS_US_TO_101 is not initialized. Unable to proceed: null Error 2) Exception caught by adapter framework: File Adapter configuration not initialized:
3) Error Delivery of the message to the application using connection AFW failed, due to: File Adapter configuration not initialized:.
please tell me how can i reslove the issue
thanks
niru

Hi
i have checked the content convertion and changed as below
the structure is
Row.fieldNamesTrans_Id,Order,Item,Product_Id,Product_desc,Lot_nr,Ship_via,Exp_qty,Carousel_loc,compart,Destination,Label
Row.fieldSeparator     ,
Row.fieldFixedType     char
Row.endSeparator     'nl'
Row.addHeaderLine     4
Row.headerlineTrans_Id,Order,Item,Product_Id,Product_desc,Lot_nr,Ship_via,Exp_qty,Carousel_loc,compart,Destination,Label
even though iam facing the issue. iam wondering "_i have used in the similar structure for other 3 mappings in same scenario those are working perfect "_ but based on condition if 4 th mapping is executed iam facing the problem
error message in RWB/Adapeters
File adapter receiver channel CC_DDPWCS_US_TO_101 is not initialized. Unable to proceed: null
Error Exception caught by adapter framework: File Adapter configuration not initialized:
Error Delivery of the message to the application using connection AFW failed, due to: File Adapter configuration not initialized:.
please help if any of you face the similar situation , i struck-up long ago here
regards
niru

IDoc adapter inbound channel: Error Error while read

Dear All
I am sending idoc from SAP 4.6C to PI. But on SM58 I am getting an error
IDoc adapter inbound channel: Error Error when reading
Which is not complete because field length is 50 characters , double clicking on this message is asking for message class. How can i see the complete message.
Can any one send me configuration detail of receiving IDOC at PI end , I don't want send to it forward from PI.

Please clear these points.
In PI system:
1. Create RFC destination of type 3 pointing to R/3 system.
2 . create Port using the IDX1 t-code port name should be SAP + SYSTEM ID OF R/3 system.
3. Using IDX2 import the IDOC meta data in to your PI system.
RFC destination to which direction , towards sender of IDOC ?
Port of which system sender system or receiver system?
What about configuration in Integration Directory , is there any configuration required on integration repository and on integration directory.
What will be the procedure of seeing complete message on SM58.
-->In PI system while ur creating the RFC destination of type 3 give the hostname and system number of ur R/3 system ie SAP 4.6 c.
-->In PI create Port using the IDX1 t-code port name should be SAP + SYSTEM ID OF R/3 system and in that RFC destination option, maintaine the destinatination name which we created using sm59.
-->coming to IR you need to create the:
                    1. Receiver data type.
                    2. receiver message type
                    3. receiver message interface. No need to create the above 3 for sender.
                   4.while mapping source is your Idoc and target is your receiver message type.
                   5. while interface mapping source is Idoc and target is receiver interface.
-->Coming to ID no need to create sender communication channel and no need to create sender agreement.
-->create receiver communication channel and receiver agreement.
--->create Interface determination.
-->create receiver determination.
-->If message got stuck in SM58, unlock it by using double click or activate the selected message.
Thanks

Unable to clone File Adapter receiver channel for parallel processing

Hi Experts,
I am using variable substitution for File - RFC - File with out BPM scenario(using request response, oneway bean).
While i placed the file in the sender FTP folder, the file didnt get picked up, but in communication channel monitoring, i am getting error ' Unable to clone File Adapter receiver channel for parallel processing'.
Can anybody provide me suggestions to solve this error.
Note : without variable substitution , the interface is working good.
Is it due to, i am trying the source structure field in response file adapter?

Hi,
In your CC, do you use some additional paramaters ?
like these one of point 47/48 of [Oss note 821267 - FAQ: XI 3.0 / PI 7.0/ PI 7.1 File Adapter|https://service.sap.com/sap/support/notes/821267]
Maybe there is conflict with a parallel connexion and the bean used to do asynch-synch bridge...
Mickael

IDoc adapter inbound channel: Error Fehler beim Le

Hello,
I have a BIG problem. I want to use IDOC - XI - IDOC. I have configured the connections. But when I send the Idoc to the XI. it returns a code in the SM58 "IDoc adapter inbound channel: Error Fehler beim Le" The Message comes cut, it doesn't return all the message. In the XI doesn't give me any error, nothing. The IDOC says thta it has been sent correctly (Code 3). How can I trace the IDOC from de sender to the XI?
I wanted to use the IDOC HRMD_A06 but now i'm trying with SYIDOC to see if it passes.
Can Someone help me?
Caller Function module Target system Date Time Status text
SRGEN13 IDOC_INBOUND_ASYNCHRONOUS RHXCLNT013 07.04.2006 10:06:46 IDoc adapter inbound channel: Error Fehler beim Le
Thank you
PM

I want to know if the Connections have to have SNC?
I have read this in the note http://help.sap.com/saphelp_nw04/helpdata/en/ca/fafaf6dbc8b240b1cf4a88c40379b2/frameset.htm
Inbound and outbound connections should be secured by Secure Network Communication (SNC).
Is that correct? maybe that's why it says the that error
PM

IDoc adapter inbound channel: Error Error when reading Exchange Profile

Hello Experts,
Currently i am working on an IDOC to file scenario, in which Data will be sent from ECC server (IDOC) to an FTP server via SAP PI, but when i try to send IDOC to PI, i am getting the following error
in Transaction SM58:-
'IDoc adapter inbound channel: Error Error when reading Exchange Profile for system XID and
client 401 occurred in the IS pipeline' .
Can anyone please help me on this.
Thanks & Regards,
Amit Naik

Hello Experts,
Let me explain to you the whole scenario, We have two servers of PI, 7.1 & 7.0. Now the Java Stack of 7.0 is not working & Cache update of 7.1 is not happening.
Thats why we have linked ABAP stack of 7.0 with Java stack of 7.1. Now we can see the objects created under Java 7.1 in ABAP stack of 7.0 (SXI_CACHE).
Now we have done all the settings to create an IDOC to file scenario. All the RFCs are working fine, but when we send an IDOC from the ECC system to ABAP 7.0, we are getting the following error 'Error while reading exchange profile for system NW' in SM58 .
Now can anyone tell me what exact settings i have to change in the Exchange profile (Java stack of 7.1), so that the Java 7.1 & ABAP 7.0 connection is setup or do i need to change anything else.
Thanks & Regards,
Amit Naik

File Adapter receiver channel : change encoding attribut in xml file

Hi,
How can I change the XML encoding attribut
from:
<?xml version="1.0" encoding="UFT-8"?>
to:
<?xml version="1.0" encoding="ISO-8859-1"?>
in my File Adapter, receiver channel ?

Hi,
plz chk the following link:
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
●      Select the File Type of the document:
○       Binary
○       Text
Under File Encoding, specify a code page.
The default setting is to use the system code page that is specific to the configuration of the installed operating system.
The content of the message is converted to the corresponding code page before the message is saved as a file.
Permitted values for the code page are the existing Charsets of the Java runtime. According to the SUN specification for the Java runtime, at least the following standard character sets must be supported:
Regards

IDoc adapter inbound channel: Error Connection err

Hi,
We are trying to push an IDoc from R3, it's status is green in WE02. However, the IDoc is not reaching PI.
In tcode SM58 in R3 we are getting an error "IDoc adapter inbound channel: Error Connection err". I have gone through the SAP note 940313 but was not able to figure out the exact cause of error.
Any help would be appreciated.
Regards
Pravesh

Hi,
Please check the steps for Idoc posting to SAP PI system from R/3. Probably you are missing some configuration.
Few Checks -
1. did you created Logical System using BD54?
2. Create RFC destination Type 3 for PI
3. create partner profile using we20
In Pi
Check following
1. Create RFC destination of type 3 pointing to R/3 system.
2 . create Port using the IDX1
3. Using IDX2 import the IDOC meta data
Regards
Aashish Sinha

Question About IDOC ADAPTER

I test a scenario as file->xi->IDOC->R/3
and another scenario as R/3->IDOC->XI-file
i think, it should be two Communication channel
to R/3,one is Receiver another is Sender
But when i create the channel ,after select the adapter
tyep as IDOC, i can not select the Channel as a Sender
Can only set it as a Receiver
why?
and when i test the first scenario , the flowing error
appers(my test idoc message is 'CREMAS03':
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>I:IDOC_ADAPTER:209 66609E10320A11D9ABCB000F1F6BBAD1 E1LFA1M</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Fehler: I:IDOC_ADAPTER:209 66609E10320A11D9ABCB000F1F6BBAD1 E1LFA1M</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
all of setting seems fine.

The IDOC adapter does not need a sender channel, as all information the XI needs are stored in the message itself. Sender channels are requested mostly for polling adapters like file of jdbc. HTTP-, RFC-, IDOC- and XI-adapter do not need a sender channel (see manual for further details).
The error message seem not to be translated in your system. Here is the message text:
"MSGGUID &1: Control record must start with tag EDI_DC40, not &2"
So in the payload there is no control record for the IDOC.
Check in your IDOC receiver channel, if the checkbox "Apply Control Record Values from Payload" is marked. If so, uncheck it. That should help.
Regards
Stefan

Idoc adapter- communiccation channel

Hi
When we do an Idoc to file scenario sender communication channel is not required. Because Idoc is the sender adapter. but while doing a File to Idoc case why do we neeed a receiver communication channel. Here also we use Idoc so why use a communication channel ?

Hi,
You do not need A Sender IDOC Adapter. IDoc's are sent directly to XI's Integration Engine and so no need of Sender IDOC adapter and therby Sender Agreement as well.
Yes, the port will be a TRFC port and you will use the RFC destination created in SM59 in this port.
Idoc Metadata gets loaded automatically when your scenario is run. You can also do it manually, by going to IDX2 and probiing the Port and the Basic Type of the idoc whose metadata you want to load.
but when we go for a fileto IDOC the file does not contain a standard structure
for that reason we need to create the receiver IDOC adapter .
pls chk this links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
if found worth pls do the req
Thanx
Sampath

IDoc adapter - Receiver Agreement

For IDoc Adapter, y should the receiver agreement should be created.
I know y sender agreement is not created.
-Naveen.

Hi Naveen,
The Integration Server pipeline converts the received XML to IDoc XML, and then transfers this IDoc XML to the IDoc adapter. The IDoc adapter converts the IDoc XML to native IDoc format and sends the IDoc to the identified receiver system using the standard IDoc interface, this receiver system is identified because you specify it in your <b>receiver agreement</b>. The IDoc adapter can also call external subsystems.
I hope you have understood the need of receiver agreement incase of IDoc adapters...
Regards,
Abhy

Doubt about IDOC Adapter

Hi all,
i'm using idoc adapter for generating IDOCS from R/3, and my scenario is: IDOC->XI->File. this is working fine, in R/3 i've got partner profiles for diferent vendors(suppliers) and they are configured for create idoc message in R/3 and all this message are caught by XI from my scenario and generate the corresponding text file.
but now suppose that I need another scenario because i need to send purchase orders by mail instead file to some of my vendors in R/3. the scenario would be IDOC->XI->Mail.
for both cases i would use ORDERS05.
i can't undertand how XI knows wich scenario have to use, if there's nothing from R/3 that tells XI which scenario should be used.
thanks, Fabian.

Thanks for responses, I know what should i use to do what i wanted. but i've tried to make a condition in the receiver determination and it's giving me an error saying that 'No receiver could be determined'.
i've searched in other threads and i have seen that utilizes xpath to make conditions
what i have done is add a condition in Configured Receivers as '/p1:ZORDERS2/IDOC/EDI_DC40/RCVPRN = 0000010598'
because depending on the partner, i want to use either one or other adapter (file or mail)
do i have misedd something?

Acknowledment issue with idoc Adapter

Hello all,
I've an interface process that send a specific idoc from SAP R/3 4.7 to SAP XI 3.0.
This Idoc is known at XI side in IDX2 transaction.
Each time XI receives this kind of idoc, it processes an acknowledgment (sends back an ALEAUD idoc to my SAP R/3)
with followings data in E1ADHDR / E1STATE segment :
DOCNUM     0000000002401038
STATUS     51
STAMQU     SAP
STAMID     IDOC_ADPAPTER
STAMNO     000
I don't want this ack idoc to be sent but I don't manage to find where customize Idoc adapter to send it.
Can you help me ?

HI,
Make an entry in the table IDXNOALE in XI system by providing the details for the port, IDOC etc for which the Acknowledgements need to be turned off. You ca check this port etc from IDX1 entry in XI server
Or
Go to IDXNOALE report in XI There, click on request acknowledgement button, and in exceptions section, provide the message type for which you donot want acknowledgements.
Regards,
Moorthy

Content Field issue in Mail adapter receiver

My inerface CIDX->TO-->IDOC:
I have an Error handling logic (Busines error) which needs to be send in EMail....the to address has to be detemined in runtime, the mail content is in the following format
Mail Content:
A KB order type came in from:
Partner Information:
         Partner Name.
         Darex
         Chicago IL 60638
         US
///below data till end is for single line item, will occur twice if 2 line item
PO Number       : 45012529631
PO Line No       : 1
Customer Product Code : YYYYYYY
Customer Product Name : XXXXXXXXXX
Price                    : 12345
You should verify the PO is updated in the hosted solution and that the price is correct in SAP. If this isn't the correct price from our partner please contact them and verify what the correct price should be..
I am able to send the above content in mail for line item is 1, if there are more than 1 lineitem then it is breaking as mail content size is huge
If there are Multiple Line items present in the Incoming CIDX file then the number od line items should be disaplayed in the mail. all the lines POLine NO till end will repeate for each Line Item....i am getting the arrayindex out of memeory exception as the data is huge which i am mapping to the content field of the reciver mail adapter....
kindly suggest me the better method to handle this situation..my worry is if the number of line item is 10 then the mail content will be very huge and it will break during the runtime, as that field content cannot take so huge data.

Hi Kiran
Then there is no need to use Transformation bean for this
In Mapping map the mail package Content_type field with
text/plain;name="xyz.csv"
and select mail package and keep attachments in receiver mail adapter
This will work
Thanks
Gaurav

Issue with IDoc adapter

Hi
I have sent a couple of IDocs from r3 to a legacy system through a Xi interface. Sender adapter is IDoc. For example I have sent 100 IDocs from r3 and 80 reached legacy system. Where we can check for missing IDoc? I am able to see 100 in BD87 of r3 system.
Thanks

I can see that message in SXMB_MONI as a success message. But if go to the let of the display there is a column with name outbound status. In that column is is showing a red flag( error at outbound side). No message in SMQ1or SMQ2. Also no error message in RWB. Where it can be found? How to reprocess it? Do we have to resend the IDoc again?
thanks

Issue about IDoc Adapter Receiver Channel's Performance

Similar Messages

Maybe you are looking for