Issue at reverse SNP_SESSION

Hi guys,
I'm attempting to apply the reveerse engineer to table SNPW.SNP_SESSION but I can see it.
When I apply the reveerse to all tables in the message bar I see as if all the tables were reversed but I can not see them,
Any idea?

When you say "But it is updating I check in Dev environment. "
Do you mean that "dev table is updated even when test package are launched" ?
If so, it seems that you don't use your TEST repository but the DEV repository with TEST Context.
So, are you sure the TEST packages have been launched after connecting to the TEST repository ? (different from DEV repository with TEST context)

Similar Messages

  • COPA document not generated when Post Goods Issue is reversed.

    Hello Friends,
    WE uses Stock Transport Order in two steps for transfering Stock from one plant to another.  We have defined a Condition type FRB1 to capture the Freight cost involved in the stock transfer.
    When the Post goods issue is done for the Stock Transport Order. following Accounting documents are generated.
    Accounting
    Profit Center
    COPA
    Spec. Purpose Ledger
    Controlling Document
    Material Ledger document.
    But When the Post goods issue is reversed through transaction code VL09 all the above documents are generated except for COPA document. Though in controlling document it shows the object type hit is REO i.e profitability Analysis
    For further information we have mapped cost element (600150) with Value field in PA transfer structure (Direct assignment from FI and MM. Movement type used for PGI are 641 & 642.
    Thank you

    Dear Colleagues
    I thank all those who put in thier time and efforts for possible solution for my problem. But I could resolve this issue with help from SAP.
    Basically in costing based COPA the system does not post the cost of goods sold to COPA during goods issue but it is done at the time of posting the invoice since the system wants to see the revenues and the COGS values together.
    Since the system posts the COGS into COPA at the time of invoice posting, you will appreciate that if this is also done during goods
    issue then you will have duplicate entries in your COPA (i.e. the COGS will be doubled).
    If in transaction VL01N/VL02N a costing-based line item would be posted, the costs would be double in CO-PA (the billing and goods issue). For this reason, no costing based line items will be created in the standard R/3 system for transaction VL01N/VL02N.
    If for some reason you still wish to post the COGS to COPA during goods issue you have to do the same thro a modification of the system.In your case you have applied note 214381 for the same. Please note here that movement type '641' is used as an example. For other movement types you will need to code accordingly.
    as per note 337488 point 2. the changes of note 214381 were not required in our case. Therefore we reverted these changes in LKEIIF01 and added the relevant coding for movement type 642 in function COPA_DOCUMENT_CHECK as per note 337488 point 2.
    Looking forward for your continued support
    Regards
    Umesh Gothankar

  • Issue with reversal of MIRO for Planned Delivery Cost

    Hi Xperts
    We have found out an issue while reversing the MIRO document for Planned Del costs. When we have done the MIRO, the accounting entry got correctly posted with correct account keys.Conditions are not inventoried.
    However, when we had reversed it - the stock account got hit.Do not understand, why that happened.Do you have any clue?
    1. Suppose we have done the MIRO for Del Cost & then performed GR.Now Stock has already consumed & afterwards we have found that the MIRO for Del Cost is wrong & reverse - in this scenario shall the Stock account will get a hit????
    2. I have maintained Price Control "V" in Material Master.However, I have maintained a Standard Price by mistake.In that case shall SAP ignores the MAP & takes Standard Price into account & post PRD??
    Regards
    Soumick 

    Hi,
    Before checking Planned Delivery costs accounting documents in MIRO posting and MIRO cancellation document, 1st check how Planned Delivery costs designed for your procurement process.
    Use t.code:ME23N, check your Purchase order
    Option-1:
    Is Planned Delivery costs added to inventory account and at the same time Planned Delivery costs posted to Separate Planned Delivery costs G/L account.
    OR
    Option-2:
    Is Planned Delivery costs posted to Planned Delivery costs G/L account ONLY
    OR
    Option-3:
    Is Planned Delivery costs added to inventory account ONLY.
    Based the above one setting, system  will post goods receipt and invoice posting document with corresponding accounting entries. Also cancellation of invoice posting document refer to these setting.But account posting depends on price control available in material master.
    NOTE:
    Standard price procedure (price control “S”):The system carries out all stock postings at a price defined in the material master. Variances in price are posted to price difference accounts.
    Moving average price (price control “V”): The system valuates goods receipts with the purchase order price and goods issues with the current moving average price.Differences in price between the purchase order price and the invoice are posted directly to the relevant stock account if there is sufficient stock coverage.
    Regards,
    Biju K

  • Quantity Issue while Reversing a Paid Credit Memo of Vendor Return PO?

    Has anyone encountered the following problem when posting & reversing GRIR transactions against a Vendor Return PO'?
    We have a Vendor Return PO with a single line item - the return indicator is checked. The PO is issued and released. The GR is entered (mvmt type 161) and then the IR (credit memo) is entered. The user then entered another GR to reverse the transaction (mvmt type 162) and then attempted to reverse the Credit memo by posting an Invoice against it. The way they did it, the invoice added another quantity credit of 100 but posted the $ value (debit) correctly - as this is an invoice and not a credit memo, the quantity that posted should have also been a debit of 100, not a credit.
    Has anyone experience this issue? Could the problem be the order in which the document reversals were entered? Instead of entering them in the order that they were originally entered, maybe they needed to reverse the credit memo 1st and then the GR (mvmt type 162)? Could the fact that the transaction occurred last year and we are attempting to correct it this year, make a difference?
    Also, we have no idea how to get the quantity to correct.....any help would be appreciated.
    Thank you.

    Anyone to help on this please, thanks in advance.

  • Issue in Reversal of Goods Issue

    Hi Experts,
    I am facing a strange issue during the reversal of a delivery which has a Goods Issue done for it.
    When I reverse a Goods Issue, I am seeing that the External Delivery Reference field on the Delivery Header (LIKP-LIFEX) is getting cleared in a couple of SAP environments, whereas this is not happening in the higher Production environment.
    I am not sure if this is a standard SAP functionality of clearing out the External Delivery field, but if not, then I have definitely not written any code for that.
    I have checked the code in the Delivery-related User Exits in these SAP systems to see if there is any difference in code, but I dont find any such ambiguity.
    If anyone of you has faced a similar issue, kindly help me out with this one.
    Any pointers in the direction of finding the reason for this issue will be a great help.
    Thank you.
    Regards,
    Keerthi

    Dear
    case 1 : when i use mb1a to issue good with movement type 531 in which table can i find the stock details .
    case 2. same from 262,532.
    SAP Tabel : Tabel will be AUFM and field BWART /MSEG
    1.AUFM-MSEG  for 261
    2.1.AUFM-BWART for 262 , 531 , 532
    Regards
    JH

  • Issue in reversing the GR

    Hi All,
    I have a program which is used to reverse the GR for a particular purchase order.
    Before reversing it,
    Service Entry Sheet (SES) for that purchase order is released using function module "BAPI_ENTRYSHEET_RESET_RELEASE". After this i have performed transaction commit. Then to delete this SES, function module "BAPI_ENTRYSHEET_DELETE" and there is a commit after this.
    But the issue here is, lets say i have two SES. While releasing and deleting the first SES, the second SES is getting triggered and being processed. Hence it is showing Run time error.
    To avoid this, i thought of adding a WAIT statement after BAPI_ENTRYSHEET_RESET_RELEASE, but it cause performance issue.
    Please help me in sorting out this issue.
    Thanks in Advance.

    Hello Spandana Musham.
         I have also faced this issue with BAPI and I opted for BDC finally.    
    Regards.

  • ISSUE: TDS REVERSAL DURING ADVANCE CLEARING WITH INVOICE

    Dear All
      I am having problem related to TDS reversal.
    For e.g
    Advance payment to Vendor: rs 10000/
    Tds deducted is rs 200/
    Now Invoice posted for amount is: 100000/
    Tds deductes is rs 1000/
    We know that TDS on rs 10000 is deducted twice which is generally reversed during advance clearing with invoice through F-54. But when I am clearing Ad. with Invoice, no TDS is getting reversed.
    Please help me on this issue or is there any other way of doing this process.
    points will be awarded
    Thanks in advance
    sandeep panwar

    Hi
    run the program RWTF010 in SE38
    Regards
    Sanil Bhandari

  • Issue in Reversing the payment order in IHC2 T code.

    Hello All
            I am doing REVERSING THE PAYMENT ORDER using IHC2 T code.
    While doing reverse it is creating the payment items for the respective payment order.
    Here is my requirement, need to change the posting date for the creating payment item for the reversal process.
    please let me know if we have any enhancement points to overcome this issue.
    Thank you all.

    Hello Spandana Musham.
         I have also faced this issue with BAPI and I opted for BDC finally.    
    Regards.

  • Issue while reversing the doc

    Hello Friends,
    Before activation of cost element for a GL account we had done few postings into it.  Later on we realized and activated cost element, but the problem is there are some postings in the GL account which we posted before activation of  the cost element for this GL account, so those are not transferred to respective cost center. Now system Is not allowing to reverse those transactions as it is asking cost center assignment. But there is no cost center assignment in the original document.
    How can we rectify this issue?
    Rgds
    Murali. N

    Hi Murali
    To my mind, I see the solution in 2 steps and it seems possible to me
    1. Use OKBA and transfer the postings from FI to CO.... This will transfer all the postings which were made before creation of cost element
    You can specify a default cost center in KA02 or in OKb9 for this purpose
    2. Once the postings go in CO, reverse the FI documents now.... It will hit the same cost center as in step 1
    3. Now remove OKB9 entry
    4. make postings from FI again
    I am sure this should work
    Regards
    Ajay M

  • MM COnsigment stock: Unable to issue against reversation

    dear all ,
    we are trying to prototype a MM consigment stock process.
    we have done the following
    1. Purchase info record is created as consigment
    2. PO is created. while creating the PO, the net price is coming as Zero.
    3. Migo was possble with item category as K and movement type as 101
    4. Created a reversation
    5. finally tried to do a goods issue with special indicator as K
    we are getting error PO has zero price.
    we have tried all known settings and the net price in PO  is still coming as zero.
    kindly let us know where the issue could be . what setting need to be modified.
    regards

    Dear Friend,
    when the matl is in consignment sstores, it is not belongs to company. Vendor is the legal owner of the matls.
    you have to transfer from consignment stores to  company stock using 411-K mvt type( T-code= MB1B).
    *you can not do two transactions at single shot( i.e. both transfer posting and issue a matl against Resevastion)*
    In ur case upto 3rd step is OK.
    then,
    1.0 Transfer the matl to companys stock.
    2.0 Create a reservation against a cost center.
    3.0 issue a matl against ur reservation.
    OR
    **u can issue a matl directly to cost center using mvt 201-K in T- code= MB1A.**
    *By that time if u see the matl do. u wil see that stock changes from 101(K-) to 201(K+), but can not issue against reservation*
    It will solve ur problem.
    If u have any doubts, plse revert back.
    Reward if useful.
    Regards
    Viru

  • Issue with Reverse Telecine

    I just finished a short film that I shot over two shoot dates. My cinematographer accidentaly shot 1 in 24P Advanced mode and the other in 24P Standard mode.
    I brought my 24P standard footage in to cinematool and did a reverse telecine in order to convert the footage to 24 frames. I am having a problem now as the dialogue is out of synch.
    If anyone has any advice on how I can fix this problem, it would be great.
    Thanks,

    I have resolved the issue for the moment, I just manually moved the sound timeline and it seems to have brought the audio back into sync.

  • Issue in Reversing a FI Document using BAPI_ACC_DOCUMENT_REV_CHECK

    Hi Experts!
    When I try to reverse a FI document with document no (9100000451) in company code 005 in my code by calling the BAPI BAPI_ACC_DOCUMENT_REV_CHECK and BAPI_ACC_DOCUMENT_REV_POST, its gives an error saying  'Reversal in component General Ledger not possible' in BAPI_ACC_DOCUMENT_REV_CHECK and reversal is not possible.
    But in the standard transaction FB08 when I pass the same doc no with the company code 005 it doesn't give an error and reversal is successful.
    Please help.
    Thanks.
    Siddharth.
    Moderator Message : Duplicate Post locked.
    Edited by: Vinod Kumar on May 7, 2011 10:23 AM

    Hi,
    put a  break in subroutine FORM fill_acchd
    and execute the bapi.
    Here you have:
      CLEAR gs_acchd.
      MOVE-CORRESPONDING gs_aw TO gs_acchd.
      gs_acchd-usnam = gs_bapi_acchd-username.
      gs_acchd-awsys = gs_bapi_acchd-obj_sys.
      gs_acchd-bktxt = gs_bapi_acchd-header_txt."---->¡¡¡CHECK THIS!!!
      gs_acchd-glvor = gs_bapi_acchd-bus_act.
      gs_acchd-tcode = sy-tcode.
      gs_acchd-acc_principle = gs_bapi_acchd-acc_principle.
    Check if there is something wrong there.
    Best regards

  • Issue while Reverse Engineering the HFM Application

    Hi,
    We are in the process of integrating HFM (11.1.2.2.0) with ODI (11.1.1.6) for metadata upload from ODI to HFM, and, I am getting the following error while reverse engineering to the HFM application.
    org.apache.bsf.BSFException: exception from Jython:
    Traceback (most recent call last):
    File "<string>", line 38, in <module>
         at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
         at com.hyperion.odi.hfm.ODIHFMAppReverser.connect(ODIHFMAppReverser.java:27)
         at com.hyperion.odi.common.ODIModelImporter.importModels(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
    com.hyperion.odi.common.ODIHAppException: com.hyperion.odi.common.ODIHAppException: Error occurred while loading driver.
         at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
         at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
         at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)
         at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
         at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
         at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
         at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
         at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
         at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
         at java.lang.Thread.run(Thread.java:662)
    Caused by: Traceback (most recent call last):
    File "<string>", line 38, in <module>
         at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
         at com.hyperion.odi.hfm.ODIHFMAppReverser.connect(ODIHFMAppReverser.java:27)
         at com.hyperion.odi.common.ODIModelImporter.importModels(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
    com.hyperion.odi.common.ODIHAppException: com.hyperion.odi.common.ODIHAppException: Error occurred while loading driver.
         at org.python.core.PyException.fillInStackTrace(PyException.java:70)
         at java.lang.Throwable.<init>(Throwable.java:181)
         at java.lang.Exception.<init>(Exception.java:29)
         at java.lang.RuntimeException.<init>(RuntimeException.java:32)
         at org.python.core.PyException.<init>(PyException.java:46)
         at org.python.core.PyException.<init>(PyException.java:43)
         at org.python.core.Py.JavaError(Py.java:455)
         at org.python.core.Py.JavaError(Py.java:448)
         at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:177)
         at org.python.core.PyObject.__call__(PyObject.java:355)
         at org.python.core.PyMethod.__call__(PyMethod.java:215)
         at org.python.core.PyMethod.instancemethod___call__(PyMethod.java:221)
         at org.python.core.PyMethod.__call__(PyMethod.java:206)
         at org.python.core.PyObject.__call__(PyObject.java:381)
         at org.python.core.PyObject.__call__(PyObject.java:385)
         at org.python.pycode._pyx0.f$0(<string>:38)
         at org.python.pycode._pyx0.call_function(<string>)
         at org.python.core.PyTableCode.call(PyTableCode.java:165)
         at org.python.core.PyCode.call(PyCode.java:18)
         at org.python.core.Py.runCode(Py.java:1204)
         at org.python.core.Py.exec(Py.java:1248)
         at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:172)
         at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
         ... 19 more
    Caused by: com.hyperion.odi.common.ODIHAppException: Error occurred while loading driver.
         at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
         at com.hyperion.odi.hfm.ODIHFMAppReverser.connect(ODIHFMAppReverser.java:27)
         at com.hyperion.odi.common.ODIModelImporter.importModels(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:175)
         ... 33 more
    Caused by: com.hyperion.odi.hfm.wrapper.HFMException: Error occurred while loading driver.
         at com.hyperion.odi.hfm.wrapper.HFMServer.<init>(HFMServer.java:29)
         at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:51)
         ... 40 more
    Caused by: com.hyperion.odi.hfm.wrapper.HFMException: C:\Oracle\Middleware\Oracle_ODI1\oracledi\agent\drivers\HFMDriver.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform
         at com.hyperion.odi.hfm.wrapper.HFMDriverJNI.getDriver(HFMDriverJNI.java:23)
         at com.hyperion.odi.hfm.wrapper.HFMServer.<init>(HFMServer.java:26)
         ... 41 more
    Can anyone please suggest a suitable solution for this?
    Thanks
    Abhi

    Hi,
    Under the readme eRPI : http://docs.oracle.com/cd/E17236_01/epm.1112/readme/erpi_1112200_readme.html
    I find this :
    ODI Setup Steps to Integrate with Financial Management
    To setup the ODI to integrate with Financial Management:
    Rename odiparams.bat located at <ODI_HOME>\oracledi\agent\bin to odiparams.bat.backup.
    The default installation location is C:\app\Oracle\product\11.1.1\Oracle_ODI_1.
    Download Oracle Data Integrator Companion CD 11.1.1.6.2.
    Unzip the contents of the Companion CD to the temp directory.
    Unzip oracledi-agent-standalone.zip.
    Copy the contents to: <ODI_HOME>.
    Make a backup of the HFMDriver.DLL.
    For the 32 bit operating system, copy HFMDriver32_11.1.2.2.dll as HFMDriver.DLL.
    For the 64bit operating system, copy HFMDriver64_11.1.2.2.dll as HFMDriver.DLL.
    Rename odiparams.bat.backup from Step 1 to odiparams.
    Edit the PATH to include: <ODI_HOME>\oracledi.sdk\lib
    Restart the ODI Agent.
    I try this procedure, but now, I have a new error :
    - Unable to connect on "myhfmserver" with "admin" user
    I think that, there is another step to do, because now HFM 11.1.2.2 use directly the "EPM Registry" (into Shared Services Schema) to retreive the HFM servers ou Clusters.
    But I don't find any information, how to setup this part into ODI.
    Or may be, we need to setup "Regedit Keys" into Windows registry like previous HFM release ?
    If you have any news, please inform me

  • In which table we get the details of related to goods issue and reversal

    dear experts,
    hello every body  please help me in finding the tables :
    case 1 : when i use mb1a to issue good with movement type 531 in which table can i find the stock details .
    case 2. same from 262,532.
    regards,
    Bh krishna mohan.

    Dear
    case 1 : when i use mb1a to issue good with movement type 531 in which table can i find the stock details .
    case 2. same from 262,532.
    SAP Tabel : Tabel will be AUFM and field BWART /MSEG
    1.AUFM-MSEG  for 261
    2.1.AUFM-BWART for 262 , 531 , 532
    Regards
    JH

  • Issue in reverse engineering the model source is excel

    Hi Everyone,
    I am new to ODI, i am trying to export the excel file data into oracle table. For doing this created physical and logical schema for Excel file and Oracle database.
    Tried to created a Model and reverse engineer the excel file to get the fields in it. But when i do them it says its done, but does not show the excel datastore in it.
    Please help me to rectify it. Excel file is .xls format and ODI is standalore 11.1.1.
    If you thing i have any thing please let me know the step by step procedure to export excel file to oracel table in ODI 11.1.1 version
    Thanks in advance.
    Regards
    Sandeep

    Hi Sandeep,
    have you created a name for the range of data cells ?
    Follow the steps given in this websource:
    http://john-goodwin.blogspot.com/2009/03/odi-series-excel-functionality.html
    "So the object of this exercise is to get the information from the excel file into the above database table. To achieve this the structure of the excel file has to be reversed in the ODI datastore format but before this is done named ranges have to be created in the file, this is because the ODI excel technology works on the basis of turning named ranges into datastores."
    Naming a Cell or Range in Excel 2007:
    Read more: http://www.dummies.com/how-to/content/naming-a-cell-or-range-in-excel-2007.html#ixzz1RXrOBXkv
    http://www.dummies.com/how-to/content/naming-a-cell-or-range-in-excel-2007.html
    If you have already done this please disregard my reply.
    Regards,
    kk

Maybe you are looking for