Issue Creating Duplicate Database on Different host using RMAN Backup

HI friends..
I m trying to create a duplicate db on different host ....... 27
i have live production db on ............. 15
its up 24*7.
i know how to create dup db using cold backup..but dont know how to create it using RMAN Backup..
I have googled..but getting issues..
Steps Taken till now
Note- I dont have catalog created on live db..
I already have set the tnsnames.ora on both servers
1) Took full backup plus archivelog plus control file on 15
2) moved it to another host..ie 27
3) now on live db..
I conected to rman target /
so i m now connected to prod db
than i try to conect to rman auxiliary sys/sys@dubpd..
But it gives me insufficient privilages error..
Can you tell me what to do next..Coz unless i get into mount phase on sever 27( new server)..i cannot use the control file from backup).my dupdb is up in nomount phase..but what enxt i can do..to restore the control file and than restore the backup after cataloging them to right path..
Thanks in advance frieds...

sai121 wrote:
Nope ..on live db..
@comand prompt when i type sqlplus sys/sys@dupdb..
its says 0ra-12518...Listener cannot hand off client connection..
My tns name for live server is..*primary* on live server .. whose ip is 15..(lIVE SERVER).
i also have another entery with tns names- standby .on live server .. whose ip is 27..(other server for duplicated db).
now @command prompt..@live server.. i did sqlplus sys/sys@standby
It gives me ORA-12518
Am i missing something..1- It could be a network problem. You may enable tracing on listener (and examine the logs).
2- Add "DIRECT_HANDOFF_TTC_LISTENER=OFF" to listener.ora, then reload the listener
3- You may want to increase "large_pool_size"

Similar Messages

To restore backup on different host using RMAN

Hi All,
Friend I need your help once again. I want to restore my database from the past backup to new HOST by keeping the original database intact using RMAN. Let me explain the scenario:-
Databas Version - 8.1.7
OS - Solaris 5.8
We are using RMAN with Tivoli as third party media management. I just need to restore the database from this tape library using RMAN with recovery catalog on new server. The only doubt I have is how I will make the backups of the production database whose backup has to be restored available on the new host where I have to create new database.
I will be using different file structure for the newly restored database. Do I have to create TDPO files seperately on the server on which I have to restore the database.
Please reply asap.
Regards
Harpreet Singh

You need to create a tdpo.opt file of source on the destination database. Then, allocate channel using this TDPO_OPTFILE and recover database.

How to restore a single instance database to RAC (10g) using RMAN ?

Hi all,
I have a single instance database configured using file system in a unique server, so now I need to restore this database using RMAN to a new RAC environment with two nodes and ASM also.
Does anyone can help with this documentation or a link about any information about this restore using rman ?
I tryied found on metalink but threres isn´t this specific case. Only how to convert single instance to 10g RAC, but without how to use with rman information.
System: Windows 2003
Oracle 10g R2
Thanks.
Wander(Brazil)

Wander(Brazil) wrote:
Hi all,
I have a single instance database configured using file system in a unique server, so now I need to restore this database using RMAN to a new RAC environment with two nodes and ASM also.
In essense you are really doing nothing more than restoring a backup on a new host. If you want a blow by blow detail of how to accomplish it take at http://www.oracledistilled.com/oracle-database/restore-database-to-another-host-using-rman
In order to write the files to the ASM Disk groups you will use the SET NEWNAME FOR DATAFILE in your restore script. You will also need to create the ORACLE_BASE/admin/<DBSID> structure on all of node. Once you get the database completely restore you will need to edit the SPFILE to include the proper value for the CLUSTER* parameters and each the node specific parameters. Sorry that it is kind of higher level than what you are probably looking for but the link above and what I put here should get you were want to go.

Error in creating Duplicate Database in same server..

Hi,
I am getting following error when creating duplicate database
DB Version=10.2.0.4
$ rman target sys/sys@test nocatalog auxiliary /
Recovery Manager: Release 10.2.0.4.0 - Production on Mon Sep 28 15:13:32 2009
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: TEST (DBID=1702666620, not open)
using target database control file instead of recovery catalog
connected to auxiliary database: CLNTEST (not mounted)
RMAN> DUPLICATE TARGET DATABASE TO "CLNTEST";
Starting Duplicate Db at 28-SEP-09
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: sid=156 devtype=DISK
contents of Memory Script:
set until scn 597629461;
set newname for datafile 1 to
"/u01/data_new/clonetest/system01.dbf";
set newname for datafile 2 to
"/u01/data_new/clonetest/undotbs01.dbf";
set newname for datafile 3 to
"/u01/data_new/clonetest/sysaux01.dbf";
set newname for datafile 4 to
"/u01/data_new/clonetest/users01.dbf";
set newname for datafile 5 to
"/u01/data_new/clonetest/example01.dbf";
set newname for datafile 6 to
"/u01/data_new/clonetest/undotbs02.dbf";
set newname for datafile 7 to
"/u01/data_new/clonetest/alweb1.dbf";
set newname for datafile 8 to
"/u01/data_new/clonetest/indx1.dbf";
restore
check readonly
clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 28-SEP-09
using channel ORA_AUX_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/28/2009 15:13:40
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 8 found to restore
RMAN-06023: no backup or copy of datafile 7 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN> crosscheck backupset of datafile 1;
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=154 devtype=DISK
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
Crosschecked 2 objects
RMAN> crosscheck backupset of datafile 2;
using channel ORA_DISK_1
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
Crosschecked 2 objects
RMAN> crosscheck backupset of datafile 3;
using channel ORA_DISK_1
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
Crosschecked 2 objects
RMAN> crosscheck backupset of datafile 4;
using channel ORA_DISK_1
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
Crosschecked 2 objects
RMAN> crosscheck backupset of datafile 5;
using channel ORA_DISK_1
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
Crosschecked 2 objects
RMAN> crosscheck backupset of datafile 6;
using channel ORA_DISK_1
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
Crosschecked 2 objects
RMAN> crosscheck backupset of datafile 7;
using channel ORA_DISK_1
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
Crosschecked 2 objects
Thanks,

Hi,
RMAN> show all;
using target database control file instead of recovery catalog
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP OFF; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/oracle/ora10g/product/10.2.0/db_1/dbs/snapcf_TEST.f'; # default
Thanks,

Standby database using rman backup

I'm using oracle11g on my work place and now i wont to create duplicate database using rman backup.
at the time i installed only oracle 11g software.
Pls guide me to overcome the problem. i'm newcomer to oracle.
Pls give the steps.
Edited by: user10444101 on Apr 30, 2010 2:17 AM

user10444101 wrote:
I'm using oracle11g on my work place and now i wont to create duplicate database using rman backup.
at the time i installed only oracle 11g software.
Pls guide me to overcome the problem. i'm newcomer to oracle.
Pls give the steps.
Edited by: user10444101 on Apr 30, 2010 2:17 AMSee the following link
http://download.oracle.com/docs/cd/B28359_01/backup.111/b28270/rcmdupdb.htm#i1008564

Cloning using rman backups?

Is it possible to clone using RMAN backups?
How do we do it . Please tell me the steps of configuring.

Hi,
Let's take the example to create the auxiliary (clone) database using the rman backup in same server.
1)Building the auxiliary database directory structure
a) datafile, control file, redo file location
b) pfile,bdump,cdump,udump
2) Create the pfile from spfile (if required) and use it for auxiliary database with appropriate modification
3) Make all the necessary changes to your aux1 init.ora file
control_files=….
background_dump_dest=….
user_dump_dest=…
log_archive_dest_1=….
db_name=‘aux1’
instance_name=‘aux1’
remote_login_passwordfile=exclusive
4) Start aux1 instance in nomount mode
ORACLE_SID=aux1
export ORACLE_SID=aux1
sqlplus /nolog
sql>connect / as sysdba
sql> startup nomount pfile=/test/initaux1.ora
5)Configure the listener and tnsname.ora file for auxiliary database. Restart the listener.
lsnrctl>stop
lsnrctl>start
listener.ora entry
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = AUX1)
(ORACLE_HOME=/ORAHOME1/)
(SID_NAME = AUX1)
TNSNAMES.ORA ENTRY
AUX1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = xxx) (PORT = 1521)
(CONNECT_DATA =
(SID = AUX1)
(SERVER = DEDICATED)
6) Connect to the target and auxiliary instance and run the duplicate command
Rman>connect target /
Rman>connect auxilary sys/password@aux1
RMAN> connect target sys@prod
target database Password:
connected to target database: aaaa (DBID=4199802962)
RMAN> connect auxiliary sys@aux1
auxiliary database Password:
connected to auxiliary database: aux1 (not mounted)
RMAN> run
2> {
3> set newname for datafile 1 to 'C:\AUX1\SYSTEM01.DBF';
4> set newname for datafile 2 to 'C:\AUX1\UNDOTBS01.DBF';
5> set newname for datafile 3 to 'C:\AUX1\CWMLITE01.DBF';
6> set newname for datafile 4 to 'C:\AUX1\DRSYS01.DBF';
7> set newname for datafile 5 to 'C:\AUX1\EXAMPLE01.DBF';
8> set newname for datafile 6 to 'C:\AUX1\INDX01.DBF';
9> set newname for datafile 7 to 'C:\AUX1\TOOLS01.DBF';
10> set newname for datafile 8 to 'C:\AUX1\USERS01.DBF';
11> DUPLICATE TARGET DATABASE TO aux1
12> LOGFILE
13> GROUP 1 ('C:\aux1\redo01.log') size 100m reuse,
14> GROUP 2 ('C:\aux1\redo02.log') size 100m reuse;
15> }

Refresh Dev using RMAN backups

hi ,
i would like to refresh my dev environment using RMAN backup set of production ..
i can not connect to Production database . i only have copy of Backup set ..
and my dev database is with different name and diffident file locations ..
how can i get it done ..
Thanks

Wrong forum. This is the Oracle Forms forum.
Francois

Cloning DB using RMAN Backup in a single system

Hi,
I want to clone my database using RMAN backup in the same system only. Please let me know the suitable document for that in both windows and linux.
Thanks in advance
Mahi

hi
find for both platforms linux and windows
http://www.dizwell.com/prod/node/9
http://www.pgts.com.au/pgtsj/pgtsj0211b.html
Regards
Vignesh Bala
Message was edited by:
Vignesh Bala

Creating a standby on different host

Hi ,
We are planning to create a cross platform standby database.
our source db is on IBM AIX and standby will be on HP-UX.
oracle db version: 11.2.0.1
Is it possible to create a standby when primary and secondary will be on different host.
your suggestion are appreciated.
Thanks and Regards

Hi,
Yes .. you can't do that.
For each architecture Oralce build their own binaries. (i.e Processor Power has is different binaries from Processor Intel)
For some architectures, Oracle succeeded in creating compatibility between some different architectures, the Table on note 413484.1 describe it.
Oracle has certified to use AIX (Power) with Solaris (SPARC), but because of bug (12702521) Oracle reported it's no longer certified.
In your case (AIX) there is no compatibility with others plataform. AIX binaries is compatible only with itself. (e.g Processor Power 4 with Processor Power 7)
If you still think about creating a DR environment, using a different platform (In your case AIX) you must search about use the Oracle Golden Gate or Oracle Streams.

DUPLICATE DATABASE IN ANOTHER HOST WITH THE SAME DATABASE NAME

Hi all.
I want duplicate a database(dbteste1 host:wander) to another host(magda) with the same database name.
My tnsnames in host wander is this:
DBTESTE1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = wander)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = dbteste1)
DBTEST1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = magda)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = dbteste1)
Tnsping is ok !!!
Follow the rman command;
RMAN> run
duplicate target database to dbtest1 nofilenamecheck;
and i get the following message:
RMAN-06136: ORACLE error from auxiliary database: ORA-01503: CREATE CONTROLFILE falhou
ORA-01504: o nome 'dbtest1' do banco de dados nÒo corresponde ao parÔmetro db_name 'dbteste1'
If i run this command:
RMAN> run
duplicate target database to dbteste1 nofilenamecheck;
and i get the following message:
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: RMAN-20021: database not set
RMAN-06031: could not translate database keyword
I´m using oracle 9.2.0.7 on Windows

Wrong procedure and connection command,
check Oracle document,
Duplicating a Database with Recovery Manager
http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmdupdb.htm#RCMUG012
Follow all steps listed.

How to Protect two Apps running on two different Hosts using same OAM serve

Hi All,
I am new to OAM. I am trying to configure SSO for an Application using OAM 11g server which is already protecting another Application(Oracle EBS) on a different host.
Oracle EBS application uses the Oracle EBS Access Gate to collect the credentials.
Now what should I do to protect the second application say APP2. Should I require to install a new OHS instance and new Webgate for this purpose ? or can i use the one already used by EBS application ?
Please reply me soon
Thanks,
Prabhu

You may use the same OHS instance by creating additional reverse proxy filter for your application 2.
Or create another instance of OHS and configure webgate, OAM policies for your application 2.
All the applications configured with OAM will be configured for single sign on and no special configuration needs to be done.
Here are my comments to your questions:
1) Can you tell me why we should have different OHS and Webgate to protect the 2nd application ?
- As per best practices, you should have different OHS instances (+webgate) for different applications. But you may also configure the same OHS for multiple applications.
2) If we have different OHS and Webgate, then the same OAM session will be shared between the applications ? Basically the user will navigate from the first application to the second application by clicking a link on the first application's page. Will the OAM_REMOTE_USER header be passed on to the second application in this case?
- Yes, if you have different OHS and Webgate, then the same OAM session will be shared between the applications.
To pass the header variables to any application, add the variables in the application's OAM authorization policy responses.
3) By default OAM 11.1.1.3 sets the userid to the OAM_REMOTE_USER? or we should manually set a response header ?
- To be on a safer side, set this header on the authz policy's response tab and put the vallue as $user.userid

Restore database to different host

Hi
Suppose, I have a full rman backup of a database called "orcl" in the tape.
Can I restore this backupset to another host with database and instance name "test" ?
I will first restore controlfile and datafiles respectively.
In other words, is it necessary to have same database name and instance name if I want to do restore ?

Hi!
If you can connect from the target host to the source host than you can use the "DUPLICATE DATABASE" with "SET NEW NAME" option in rman. This is the easiest way:
[http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmdupdb.htm#BRADV169]
[http://download.oracle.com/docs/cd/B19306_01/backup.102/b14194/rcmsynta028.htm#RCMRF126]
If the connection is not allowd from the target host to the source host than you can simply restore and recover the ORCL database on the target host and rename it with NID (DBNEWID) utility:
[http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/dbnewid.htm#SUTIL014]
[http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/dbnewid.htm#sthref1868]
If this post was usefull please mark it as HELPFULL or CORRECT answer!
Best Regards
Norbert

Restore Database with Oracle 9i with a New Host using RMAN

Gurus,
I am trying to restore a database from some RMAN created files on a new host with a new directory structure for some testing. I do not have access to the source database.
The database is Oracle 9i.
The files that have been created are the following:
'C-2995630462-20110214-00' is the control file and SP file backup.
'B_ABM4KAJ5_1_1' is the database backup.
B_ACM4KARS_1_1 and B_AAM4KAIV_1_1 are archived redo logs
Here is the RMAN listing from when the files were created:
BS Key Size Device Type Elapsed Time Completion Time
329 56M DISK 00:00:02 14/FEB/11
BP Key: 329 Status: AVAILABLE Tag: TAG20110214T050015
Piece Name: D:\BACKUPS\CRYSTAL\B_AAM4KAIV_1_1
List of Archived Logs in backup set 329
Thrd Seq Low SCN Low Time Next SCN Next Time
1 184 4602414767 13/FEB/11 4602533494 14/FEB/11
BS Key Type LV Size Device Type Elapsed Time Completion Time
330 Full 13G DISK 00:04:33 14/FEB/11
BP Key: 330 Status: AVAILABLE Tag: TAG20110214T050021
Piece Name: D:\BACKUPS\CRYSTAL\B_ABM4KAJ5_1_1
List of Datafiles in backup set 330
File LV Type Ckp SCN Ckp Time Name
1 Full 4602533509 14/FEB/11 D:\ORACLE\ORADATA\CRYSTAL\SYSTEM01.DBF
2 Full 4602533509 14/FEB/11 D:\ORACLE\ORADATA\CRYSTAL\UNDOTBS01.DBF
3 Full 4602533509 14/FEB/11 D:\ORACLE\ORADATA\CRYSTAL\USERS01.DBF
BS Key Size Device Type Elapsed Time Completion Time
331 37K DISK 00:00:01 14/FEB/11
BP Key: 331 Status: AVAILABLE Tag: TAG20110214T050500
Piece Name: D:\BACKUPS\CRYSTAL\B_ACM4KARS_1_1
List of Archived Logs in backup set 331
Thrd Seq Low SCN Low Time Next SCN Next Time
1 185 4602533494 14/FEB/11 4602533686 14/FEB/11
BS Key Type LV Size Device Type Elapsed Time Completion Time
332 Full 3M DISK 00:00:01 14/FEB/11
BP Key: 332 Status: AVAILABLE Tag:
Piece Name: D:\BACKUPS\CRYSTAL\C-2995630462-20110214-00
SPFILE Included: Modification time: 23/NOV/10
I am new to using RMAN and I'm hoping someone could point me in a direction of some documentation to assist with the scenario described above. I've looked at several Oracle documents but have been unable to find a way to separate out the spfile from the control file.
Any help you can provide would be greatly appreciated.
Thanks.

Thanks Meeran.
I have attempted to follow the directions from the RMAN document that you posted and have run into the following error:
C:\>rman target / nocatalog
Recovery Manager: Release 9.2.0.6.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
connected to target database: DUMMY (not mounted)
using target database controlfile instead of recovery catalog
RMAN> startup force nomount
startup failed: ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file 'C:\ORACLE\ORA92\DATABASE\INITCRYSTAL.O
RA'
trying to start the Oracle instance without parameter files ...
Oracle instance started
Total System Global Area 97591104 bytes
Fixed Size 454464 bytes
Variable Size 46137344 bytes
Database Buffers 50331648 bytes
Redo Buffers 667648 bytes
RMAN> RESTORE SPFILE TO 'C:\oracle\admin\crystal\pfile\init.ora' from 'C:\oracle
\ora92\CRYSTALbk\C-2995630462-20110214-00';
Starting restore at 30-MAR-11
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 03/30/2011 11:30:07
ORA-00600: internal error code, arguments: [1866], [0x41AA450], [6144], [0x41BAD
B4], [], [], [], []
RMAN>
Am I not correctly connected to the target?
It looks like it correctly tried to create a dummy spfile, but when attempting the restore from the file it breaks.
Any suggestions? Thanks.

How can I create a database from a sharepoint using entity framework

Hello All,
I want to develop a data base from SharePoint list independently. The column name are based on a SharePoint list eg: Contact-list (will be having 10 columns)
can any one please suggest me an idea on how to do this task? Which Visual Studio template is suitable for this purpose?
I confused with starting with following Visual studio template!!!
Empty SharePoint Project??, Business Data Connectivity Model??, ASP.Net Web application??
Somebody please help me soon....
I am using SharePoint 2010 and Visual Studio 2010

Hey,
basically you should start with an empty SharePoint 2010 project where you add an List-EventReceiver. This Receiver should point to the url of the list and handle the ItemAdded-Event. In this method you place the code to create the database, for example
with a SQL-Statement.

Issue creating a database: SGA_MAX_SIZE and SGA_TARGET

Hello:
While creating a custom database, I am running into issues with the values I specify for SGA_MAX_SIZE and SGA_TARGET.
The install manual for the product I am creating the database for says that SGA_MAX_SIZE should be >= SGA_TARGET_SIZE. It also wants a minimum of 1Gig for SGA_Target
The Database Configuration Assistant defaulted to 0.64GB for SGA_TARGET and 0.168 for SGA_MAX_SIZE (This is clearly against the instruction in the installation manual).
Who is right? Me or the vendor?
I read some threads that indicate that the vendor may be wrong.
venki

Follow the vendor's instructions.
DBCA has never in its existence made a correct decision yet. It puts all control files and redo logs into one directory.
It doesn't create multiple members for the log file groups.
And its memory management is based on a simple algorithm that has nothing to do with any specific reality.
DBCA is intended for creating a generic database for generic purposes ... and that it does very very well.

Issue Creating Duplicate Database on Different host using RMAN Backup

Similar Messages

Maybe you are looking for