Issue in MS Access download !!!

Hi,
I want to download a Z table to MS Access database, in my table one of the field is of type STRING, I use this field to store long text.
When I use the program RIACCESS to create the structure, it creates a Access table with the field of type Text which has max length of 255 characters only.
Actually I want to create this field of type 'Memo' in Access so that I can store long text in Access database.
Please guide me to solve the issue.
Thanks,
Sridhar

hi!..
u can download table by gui_download on your loacl machine and from there u can upload it whereever u want
regrds
anjali

Similar Messages

CANNOT ACCESS DOWNLOAD FOR READER EVEN WITH CHANGED PASSWORD

CANNOT ACCESS DOWNLOAD FOR ADOBE READER EVEN WITH A CHANGED PASSWORD AND I HAVE BEEN ON CHAT

There are several possibilities as to why a user account may
not be correctly available or a password to it reset to fix it.
One of them may be, if the short name of the computer or of
an account was changed by the user; and later the system
may appear different or changed, with some of the user acct
settings or preferences no longer as they were prior to that.
There is a way to create a new admin level user account and
then move the older user info into the new account; then go
in and delete the other one. I am not certain as to how to do
this; but the topic has come up in these discussions, and the
general path is about the same from Panther through Leopard.
A few details may be named different, but similar as things go.
• Mac OS X: *How to change user short name* or home directory name:
http://support.apple.com/kb/ht1428
• How do I change owner's name in my Mac:
http://www.askdavetaylor.com/howto_change_owners_name_applemac.html
While these kinds of details may not be behind the exact problem in
the computer in question, directory and user account issues do often
have similar causes. Often, they are user-caused events. If the general
Directory of information on the hard disk drive has a problem, the use
of a third-party disk tool such as Disk Warrior is usually advised. If that
were needed, usually more evidence across the system would appear.
There may be a way to use a Setup Assistant to recreate a new user
experience and start over with a new admin account and user name.
Then go into the system to ferret out the old user info.
+Sorry I can't be of more help; as I am being distracted by an elderly+
+person who can't figure out why I am online or what it means to be.+
Good luck & happy computing!

Pon downloading the 4.0 version of your firefox, I have no longer been able to access downloads as they do not appear in the downloads folder (ie- pdf's etc).

Upon downloading the 4.0 version of your firefox, I have no longer been able to access downloads as they do not appear in the downloads folder (ie- pdf's etc).

Upon downloading the 4.0 version of your firefox, I have no longer been able to access downloads as they do not appear in the downloads folder (ie- pdf's etc).

Issue with assistive access not keeping permissions

Since a recent upgrade (likely from OS X 10.9.x to 10.10.2) I've had issues with Assistive Access blocking Automator and Applescript from interaction with dialogs.
If I run my script or my Automator workflow (which basically has the same script in it) I get the error:
System Events got an error: Automator is not allowed assistive access. (in the case of Automator).
If I open Automator, and then untick and retick the Automator entry in the Accessibility options within Security & Privacy (System Preferences), then workflow can run again. It continues to work until I Quit Automator. Then it's as if OS X no longer trusts Automator to be the same app I gave Accessibility permissions to. And the situation repeats. It's much as if it were not code-signed. The exact same issue plays out with Apple Script.
I came across this info, which I hoped would solve the problem, but it made no difference: http://macscripter.net/viewtopic.php?id=43394 and http://bit.ly/1x3SRmc
In my Accessibility permissions I now have:
Script Editor
Automator
1Password 5 (which the script interacts with)
com.apple.security.agentStub.xpc (in case that's being called up and triggering the Accessibility issue)
osascript (in case that's handling the script and triggering the Accessibility issue)
SecurityAgent.xpc (in case that was triggering the Accessibility issue)
I added all these because the post at http://bit.ly/1x3SRmc indicated that anything Apple Script is interacting with needs Accessibility access permissions.
My script is as follows:
set appName to "SecurityAgent"
set passApp to "1Password 5" (* set this to the name of your password manager *)
tell application "System Events"
if not (exists window 1 of process appName) then -- test if SecurityAgent window exists
set answer to display dialog "The password dialog was not found. Please check." buttons {"Ok"}
return -- abort if SecurityAgent window does not exist
end if
end tell
tell application "System Events"
set position of window 1 of process appName to {10, 10}
-- move SecurityAgent window out of the way
end tell
activate application passApp
tell application "System Events"
tell application "SystemUIServer"
set answer to display dialog "Make sure correct 1Password item is actively selected (i.e. click it again if it was previously selected), then click “Continue” to proceed." buttons {"Continue"}
end tell
tell process passApp
(* If you are not using 1Password, you may need to change the menu item clicks, below, to whatever is correct in your particular password manager *)
click menu item "copy password" of menu "item" of menu bar 1
delay 1
set appData to the clipboard
end tell
tell application "System Events"
tell process appName
set value of text field 1 of window 1 to appData
if exists (text field 2 of window 1) then
set value of text field 2 of window 1 to appData
if exists checkbox 1 of window 1 then
if value of checkbox 1 of window 1 is 1 then
click checkbox 1 of window 1
end if
end if
set value of checkbox 1 of window 1 to 0
delay 1 (* gives a moment to see what's going on *)
click button "OK" of window 1
else
if value of checkbox 1 of window 1 is 1 then
click checkbox 1 of window 1
end if
delay 1 (* gives a moment to see what's going on *)
click button "OK" of window 1
end if
end tell
end tell
end tell
In Automator it would appear the script is generating an error as soon as it reaches line 5, "if not (exists window 1 of process appName) then"
I would greatly appreciate some assistance in resolving this issue.

Starting with Mavericks, Apple changed the way that the accessibility works (see Using AppleScript with Accessibility and Security features in Mavericks) - each individual application needs to be given access, instead of a global option. A regular AppleScript application saves properties and global variables with the script, which makes it a new application as far as the system security is concerned, so it needs to be re-added to the accessibility list. To work with this new security feature, you need to code-sign your AppleScript application or make the script(s) in the bundle read-only so that they don't get changed (note that an AppleScript-based project in Xcode does not modify the application bundle by saving properties and globals).

Hi people, have on the phone till Apple, the reason i cant download OS X Lion is because BT are having issues with the large download & are working on a fix. Was told to phone back in 24 hours if problem continues

Hi people, have on the phone till Apple, the reason i cant download OS X Lion is because BT are having issues with the large download & are working on a fix. Was told to phone back in 24 hours if problem continues

Hi, just got off the phone from BT Business. It is the Business 2wire hub that has the issue. The girl from technical talked through a direct modem to Mac connection and my download took 20 minutes. If you are on Fibre broadband this is the only current fix or a new router if non fibre customer. Hope that helps.

Billing issues when trying to download an app

Hey I'm having a lot of issues when trying to download any type of app all of a sudden is asking me to update my billing information and when I enter it, is giving me the "invalid security (cvv) error" and im verifying all my info name, address, everything and is still not letting me save it and/or download any app...

Hi CriselRivera
as of now I don't the iTunes store accept the Debit card or a pre-payed card as a payment method, you will really have to find out another type of card which should be a Credit Card.
reference: http://support.apple.com/kb/HT2001
go on the section "Accepted payment types"
regards!

I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel?

I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel? Is Parallel in fact the best way to go?

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Can't access downloads on purchased music to library

Have checked firewalls and security as per the ITunes connectivity etc but still cannot access downloads - for over 24 hours it has said the ITunes store is temporarily unavailable please try later - this is now urgent as I am leaving the country and need to access my purchased music so I can put it on my IPod Touch before leaving thanks

Me too mate. Sucks.

Wireless issues once Lion was downloaded?

My router worked for about an hour after the Lion download, and then fried. I bought a new router (Linksys E4200), and the same thing happened. The routers go completely dead after about an hour. No little blinking lights, nothing. My imac is only 4 months old, and I had absolutely no issues until I downloaded Lion.

After further research, I think the problem may be the compatibility issues between Sonos and Lion! The threads I have read claim that Sonos and Apple have resolved these issues, but I have downloaded the latest updates to no avail. I'm still surpised it killed the router(s), but so far this sounds like the culprit..

Issues trying to Access SQL Plus after downloading 8i Trial Version

After successfully downloading Oracle 8i Personal Edition, I am trying to access SQL Plus, it requires to enter a User Name, Password and Host String. I enter my OTN Password ID and I am refused access. Does anyone have any ideas why?

harry,
i am assuming you are using 6.0.8.8 of reports6i, which is base-release. there have been problems withthe OCA in this version. by using the latest patch you should solve this problem. for further details, please contact oracle support services.
regards,
the oracle reports team

Popular science for iPad is no longer available in the australian app store - how do I get the issues I hadn't downloaded?

I have been a subscriber to Popular Science on the iPad since it started.
However, they have removed their app from the Australian App Store.
I now find that I cannot continue my subscription, and I can't access most of the issues that I had purchased, having either deleted them from my iPad or not downloaded them at all (even though I had paid for them).
What options do I have now?
I've been in email contact with Bonnier, the publishers.
They've apologised and given me a 12mth subscription to a PFD verison of the magazine via Zinio (which was good of them).
Regarding the back issues, they've suggested I restore them from a backup - how do I restore individual in-app magazine purchases from an old backup?
I think that I'm going to have to go to Apple and see if there's anything that they can do for me.
Any thoughts from the community would be gratefully received.

If your system's not compatible with 10.8 and has at least a Core 2 Duo(not Core Duo) CPU, phone the online Apple Store and order a download code for 10.7.
(73799)

Issue in image pre-download

Hi.
I tried to need upgrade firmware of WLC to 7.6.00.To avoid long hour outage, I was using image pre-download firmware upgrade method to all access points.There are 99 AP in total & one site has issues 5 Aps. There are 13 x 3600 APs in this site. Out of 13, 5 x APs are not able to push new firmwareFrom my troubleshooting, I found that when I start pushing new firmware to AP, Secure tunnel between WLC and AP drops.
Please guide me to resolve this issue.
Thanks

Hi Scott,
Please see below output
show flash:
Directory of flash:/
    2 -rwx       70825 May 29 2013 02:18:31 +00:00 event.log
    3 drwx           0   Mar 1 1993 00:00:12 +00:00 configs
    4 -rwx         280 Apr 24 2014 05:17:21 +00:00 lwapp_officeextend.cfg
    5 -rwx       29996 Apr 28 2014 13:24:13 +00:00 lwapp_non_apspecific_reap.cfg
    6 -rwx       95008 Apr 24 2014 05:17:24 +00:00 lwapp_reap.cfg
    7 drwx         832 May 29 2013 00:23:41 +00:00 ap3g2-k9w8-mx.152-2.JA1
   46 -rwx          64   Mar 1 1993 00:00:34 +00:00 sensord_CSPRNG0
    9 drwx         192   Dec 4 2012 05:00:01 +00:00 ap3g2-rcvk9w8-mx
   47 -rwx          64   Mar 1 1993 00:00:35 +00:00 sensord_CSPRNG1
   48 -rwx         230 Apr 24 2014 05:17:20 +00:00 env_vars
   49 -rwx       60760 Apr 24 2014 05:14:40 +00:00 event.capwap
   51 -rwx        7192 Apr 28 2014 14:04:59 +00:00 private-multiple-fs
31997952 bytes total (13533184 bytes free)

MS Access download

I'm trying to download the Access to 7.3.4 Wizard. I tell it to
accept the license terms and then get thrown back to the
original screen and the downlod process never starts. I tried
it with version for Oracle 8 and it worked. Is that file still
available? If it is does it also migrate Access 2000?
null

None of the wizards support Access 2000 migrations. I have
been able to reproduce the download problem you experienced
and have raised it with our IT people (who manage OTN). We
will ensure that the issue it resolved a.s.a.p.
Marie
Joe Ashby (guest) wrote:
: I'm trying to download the Access to 7.3.4 Wizard. I tell it
to
: accept the license terms and then get thrown back to the
: original screen and the downlod process never starts. I tried
: it with version for Oracle 8 and it worked. Is that file still
: available? If it is does it also migrate Access 2000?
Oracle Technology Network
http://technet.oracle.com
null

IPhone synching issue: not enough access privaleges for this operation.

When trying to sync my iphone (after restoring) i get an error message: You do not have enough access privaleges for this operation. My computer recently crashed so i had to restore all my music from a hard drive and reinstall itunes. No issues with the library on my computer, however now it will not sync to my phone. This is the only computer I use and it is the only apple device I use (for itunes that is). Please help! Not sure what to do.

Just thought I'd put out an update on my problem. It has been solved. I spoke to a tech at Apple at 1-800-275-2279. She had me try a few things that didn't help. Her last suggestion was to uninstall QuickTime and iTunes then reload. She sent me the uninstall instructions at http://www.info.apple.com/kbnum/n93698 which I followed. When speaking to her I told her I was afraid to do this because I saw other people on the discussion board who tried this and lost all of their music. She assured me that that wouldn't happen. I did the uninstall then the install. (Just a note here, I also read on the message board that someone said that to cure this problem you should do the install then open up QuickTime before opening iTunes. I did this also but don't really know if it made a difference.
Bottom line is I uninstalled QuickTime and itunes per the instructions at the site shown above. I then installed both again from www.apple.com/itunes/download. After the download I ran the install and unchecked the box to let itunes start after the install. I then opened Quicktime then closed it. I then opened iTunes and all of my music was there and I didn't get the anoying "iTunes is not set as the default player" and the error after trying to set it. The problem described in my first posting of copying CD's is also gone. So beleive it or not, EVERYTHING is working just like it should. Some of the above steps might not be required but I would follow them step by step because I know they worked for me.

G4 (10.4.11) airport (9.52) wifi connectivity issue w WPA access point

I am struggling to resolve a wi-fi connectivity issue between a G4 imac with airport card and a netgear wireless-n access point.
The set up is as follows - the broadband comes into a Netgear router (DG834Gv5)which my Intel imac connects wirelessly to. Two daughter's den is away downstairs so I run an ethernet cable from the main netgear router to a netgear Pro-safe wireless access point (WNAP210) as an extender (we live on a houseboat so there are metal bulkheads and the like inbetween.
In the den older daughters G5 wirelessly connects to the Netgear access point easily through a WPA-PSK connection.
Younger daughters G4 running 10.4.11, with original airport card running firmware 9.52 (airport admin utility 4.2) refuses with the 'wrong password' error (it isn't - I have checked 50x) or sometimes just 'there was an error joining'.
It can see the network strongly (the airport menubar icon goes full, then cuts, then flashes on, then drops) but refuses any traffic.
This G4 can however connect, weakly, with my upstairs router which is also WPA-PSK protected (same password)!
I have read all the forums on this and despite some non-expert posts muddling the issue I believe that this SHOULD be possible. Not WPA2 I know but basic WPA.
In addition the options in the netgear extender are b&g (like upstairs which works), g or n. So I have selected b&g - no difference.
Currently I have had to set a separate channel for her and leave it unsecured which isn't a long term option (I am just hoping that even the cleverest war-driver cant sneak in through the extender, back up to the traffic between my Intel and the main router !!?)
Can anyone suggest what I might be missing in the conjuration (sic, ahem) configuration settings either on the G4 or the Netgear box ?
Is it enough to turn the broadcasting of the open channel name off and so render it invisible ?
Thanks in advance for any expert person's attention

hi kathryn
did it have to be the Telekom, by all means??
anyway, first of all a link to a video where a german comedian writes a letter to steve jobs demanding he chose any carrier but the DTAG for the iPhone distribution in germany - really funny!
http://bit.ly/4B4OdQ
OK, I´m currently downloading the speedport manual from their website and will look through it, in order to see if there´s something in there..
as a first guess I´d try looking at the wireless prefs of that speedport box. I guess it supports by default 802.11a/b/g, whereas the G4 only does 802.11b (the "normal" airport). Try selecting only the 802.11b portion from the speedport (that makes networking somewhat slower for airport express computers, but shoudn´t be a problem since it´s still at least as fast as basic DSL service (11MBit vs 2 or 6 MBit)
cheers
Matt
(german in spain)

Issue in MS Access download !!!

Similar Messages

Maybe you are looking for