Issue in OMSY......No values in MARV table.
Dear Experts,
We have moved our requests from Development to Quality system.
In Development, we have values for company code in OMSY.
Means , In the development, the values for Fiscal year of the Current period, Current Period, Fiscal year of the previous period, Previous period, Fiscal year of last period of previous year, Last month of previous year etc are exists for my company code in OMSY. Also these values are appearing in Table: MARV.
But these values are not available for my company code in Quality system. Also, in MARV table, for my company code, no entries found in Quality system. I could not able to update thro MMPV also. When I run MMPV, it is giving message as Company code has no MARV record; no conversion here.
Kindly give your inputs , how I can get the period in OMSY.
Thanks and Regards
SRINIVASAN
Dear Jürgen ,
Thanks for the reply.
The note: 38298 explains only about how the the direct table entries which is icluded in TR is transported.
My issue here is in Development, OMSY settings are there.But we have moved almost 25 requests to Quality and found that it is not there.
Now how can we create an new TR for OMSY in Development and move to Quality & later it can be moved to production also.
When I am trying to modify in OMSY , the system gives message as The company code can no longer be initialized
Message no. MM011.
Kindly help me in this regard.
Regards
Srinivasan
Similar Messages
-
Issue with fetching a record from IHPA table with PARNR value as condition
Hi All,
I am trying to fetch a particular record from IHPA table where i am giving the OBJNR number, PARVW and PARNR as customer no. , But I am not getting any record but if i will give OBJNR and PARVW it will generate a record with having same PARNR value.
Example :
case 1st :-
when i am passing following values in IHPA table,
OBJNR = IE000000000010070910
PRAVW = BP
PARNR = 620000562
it is not generating any record
case 2nd:-
But if i will pass
OBJNR = IE000000000010070910
PRAVW = BP
it will generate a record?(one row) which will include PARNR as same 620000562 along with other value.
Q1 - Why it's not generating in case 1st,
Q2 - How I will resolve this issue ? as i have to link some table as EQUI -
IHPA -
VCKUN
VCNUM ?
I have written a code for this to join :
SELECT A~EQUNR
B~PARVW
C~CCNUM
D~CCNUM
FROM EQUI AS A JOIN IHPA AS B ON AOBJNR = BOBJNR
INNER JOIN VCKUN AS C ON BPARNR = CKUNNR
INNER JOIN VCNUM AS D ON CCCNUM = DCCNUM
APPENDING CORRESPONDING FIELDS OF TABLE IT_OBSO
WHERE A~EQUNR IN S_EQN.
AND PARVW = 'BP'.
But it is not generating any record but when i am commenting the PARVW i am getting the mixed record of PARVW as (BP,SP,SH)
Let me know if any more clarification required.
Highly appreciate your help
Thanks & Regards
ShawHi Santosh,
Thanks for your quick response.
But I am Sorry, I already checked with putting Zero before PARNR.
The issue is still as it is.
Thanks
Shaw -
How to truncate the values from the table
Hi All,
I am working on an issue..where we are first deleting all the records from the table and then based on few conditions we are putting the records back in that table...when we tried to run this program along with few others those who are doing almost the same stuff we are having issues...we tried to schedule few jobs related to these programs only...but after a ceratin amount of time couple of jobs got canceled...I was talking to my basis guy and he said the problem is ratehr then truncating the records from the table we are deleting the records and it's taking lots and lots of space to execute...so we need to truncate the records from the table insted of deleting it...we are using the following the statement right now:
DELETE FROM ZTUS_PG.
COMMIT WORK.
So can you please tell me how can we truncate the values from this table instead of just deleting them and what would be effect of this.
Thanks,
Rajeev GuptaI don't think basis is saying you should delete all the records from the table. They are saying remove the table and it's contents (a much faster thing to do). I'm not sure this the right thing to do, but you can have a look at:
http://publib.boulder.ibm.com/infocenter/db2luw/v9/index.jsp?topic=/com.ibm.db2.udb.apdv.sample.doc/doc/admin_scripts/s-truncate-db2.htm
Something like:
EXEC SQL.
TRUNCATE TABLE ZTUS_PG REUSE STORAGE
ENDEXEC.
COMMIT WORK. "Empty table is committed here
Rob
Edited by: Rob Burbank on Dec 1, 2008 4:06 PM -
How to get custom field value in vbkd table using "SD_SALESDOCUMENT_CREATE" bapi
Hi Experts,
Need your help . In one program Iam using SD_SALESDOCUMENT_CREATE bapi .
i/p for my report is am excel.
excel is having below formatt.
To create salesdoc we are using SD_SALESDOC_CREATE bapi.
but After execution of the program we are unable to find the ZZFV_SBCNT (which is custom field) in VBKD w.r.t salesdocument.
Need your help what we need to do to reflect the value in vbkd table.
Here temp will contains the data from excel
1)
FORM f_move_header_data .
wg_header-doc_type = wg_temp-auart . "Order type
wg_header-sales_org = wg_temp-vkorg . "Sales Organization
wg_header-distr_chan = wg_temp-vtweg . "Distribution Channel
wg_header-division = wg_temp-spart. "Division
wg_header-sales_off = wg_temp-vkbur . "Sales Office
wg_header-sales_grp = wg_temp-vkgrp . "Sales Group
wg_header-purch_no_c = wg_temp-bstnk . "Customer purchase order number
wg_header-pymt_meth = wg_temp-zlsch . "Payment Method
wg_header-zzychan_role = wg_temp-zzychan_role_i. "Channel Role
wg_header-zzysub_role = wg_temp-zzysub_role . "Submitter Role
wg_header-zzy_inv_for_opt = wg_temp-zzinv_format . "Invoice Format Optio
wg_header-ord_reason = wg_temp-augru . "Order Reason Code
wg_header-bill_block = wg_temp-faksp. "Billing Block
wg_headerx-doc_type = c_set . "Order type
wg_headerx-sales_org = c_set . "Sales Organization
wg_headerx-distr_chan = c_set . "Distribution Channel
wg_headerx-division = c_set. "Division
wg_headerx-sales_off = c_set . "Sales Office
wg_headerx-sales_grp = c_set . "Sales Group
wg_headerx-purch_no_c = c_set . "Customer purchase order number
wg_headerx-pymt_meth = c_set . "Payment Method
wg_headerx-zzychan_role = c_set. "Channel Role
wg_headerx-zzysub_role = c_set . "Submitter Role
wg_headerx-zzy_inv_for_opt = c_set . "Invoice Format Option
wg_headerx-ord_reason = c_set . "Order Reason Code
wg_headerx-bill_block = c_set. "Billing Block
ENDFORM. " F_MOVE_HEADER_DATA
2)
FORM f_move_item_data .
wg_item-itm_number = g_itmnumber. "Item number
wg_item-material = wg_process-matnr . "Material
wg_item-target_qty = wg_process-target_qty. "Targeted Qty
wg_item-item_categ = wg_process-pstyv. "Sales document item category
wg_item-zzylegal_i = wg_process-zzlegal. "Legal Contract
**********Added this line for vbkd-ZZFV_SBCNT****************************
wg_item-zzfv_sbcnt = wg_process-zzfv_sbcnt.
APPEND wg_item TO i_item.
wg_itemx-material = c_set . "Material
wg_itemx-target_qty = c_set. "Targeted Qty
wg_itemx-item_categ = c_set. "Sales document item category
wg_itemx-zzylegal_i = c_set. "Legal Contract
wg_itemx-zzsteady_date = c_set . "Amortization Start Date
wg_itemx-zzsteady_end_dat = c_set. "Amortization Stop Date
**********Added this line for vbkd-ZZFV_SBCNT****************************
wg_itemx-ZZFV_SBCNt = c_set. "
APPEND wg_itemx TO i_itemx.
CLEAR : wg_itemx.
endform.
3)
FORM f_move_head_ext
wg_extension-structure = c_ext_vbak.
wg_ext_vbak-zzinv_format = wg_temp-zzinv_format.
wg_ext_vbak-zzychan_role = wg_temp-zzychan_role_i.
wg_ext_vbak-zzysub_role = wg_temp-zzysub_role.
wg_extension+30 = wg_ext_vbak.
APPEND wg_extension to i_extension.
CLEAR wg_extension.
wg_extensionx-structure = c_ext_vbakx.
wg_ext_vbakx-zzinv_format = c_set.
wg_ext_vbakx-zzlegal = c_set.
wg_ext_vbakx-zzychan_role = c_set.
wg_ext_vbakx-zzysub_role = c_set.
wg_extensionx+30 = wg_ext_vbakx.
APPEND wg_extensionx TO i_extensionx.
CLEAR wg_extensionx.
ENDFORM. " F_MOVE_HEAD_EXT
*& Form F_MOVE_ITEM_EXT
* Item Extension
4)
FORM f_move_item_ext .
* Structure for BAPI parameter Extension
wg_extension-structure = c_ext_vbap.
wg_ext_vbap-posnr = g_itmnumber.
wg_ext_vbap-zzsteady_date = wg_process-zzsteady_date . "Amortization Start Date
wg_ext_vbap-zzsteady_end_dat = wg_process-zzsteady_end_dat. "Amortization Stop Date
wg_ext_vbap-zzlegal = wg_process-zzlegal. "Legal Contract
wg_extension+30 = wg_ext_vbap.
APPEND wg_extension to i_extension.
* Structure for BAPI parameter Extension - Update Indicator Fields
wg_extensionx-structure = c_ext_vbapx.
wg_ext_vbapx-posnr = g_itmnumber.
wg_ext_vbapx-zzsteady_date = c_set .
wg_ext_vbapx-zzsteady_end_dat = c_set.
* wg_ext_vbapx-zzlegal = c_set.
*wg_process-zzfv_sbcnt = c_set.
wg_extensionx+30 = wg_ext_vbapx.
APPEND wg_extensionx TO i_extensionx.
CLEAR wg_extensionx.
and bapi calling is like below.
CALL FUNCTION 'SD_SALESDOCUMENT_CREATE'
EXPORTING
sales_header_in = wg_header
sales_header_inx = wg_headerx
logic_switch = wg_logic_switch
business_object = fp_bus_obj
status_buffer_refresh = 'X'
IMPORTING
salesdocument_ex = g_sorder
TABLES
return = i_return
sales_items_in = i_item
sales_items_inx = i_itemx
sales_partners = i_partner
sales_conditions_in = i_cond
sales_conditions_inx = i_condx
sales_text = i_text
extensionin = i_extension
extensionex = i_extensionx.
still we are not getting ZZFV_SBCNT value in VBKD table w.r.t created salesdoc(g_sorder)
Please help me from this issue.
Thank You..Hi,
Please let me know how to add custom fields in the characteristic list, My clients wants department and profit center grouping.
Please tell me how to solve it..
Thanks & Regards,
Reena.. -
Issue while deleting a row from a table
Dear friends,
i am getting an issue while deleting a row from a table, pls check screen shots , the first screen shot is my table contents
when i delete 2 row , the second row is deleting properly like below screen shot
but i want like below screen shot , Col1 contents should be like pic 1 . could any one pls let me know how to solve this issue.
Thanks
VijayaHi vijaya,
please try this code, it will help you.
DATA : it_rows TYPE wdr_context_element_set,
wa_rows LIKE LINE OF it_rows.
DATA lo_nd_table TYPE REF TO if_wd_context_node.
DATA lt_table TYPE wd_this->elements_table.
DATA lo_el_table TYPE REF TO if_wd_context_element.
DATA ls_vbap TYPE wd_this->element_table.
DATA: ld_index TYPE i.
data value TYPE sy-index.
* navigate from <CONTEXT> to <table> via lead selection
lo_nd_table= wd_context->get_child_node( name = wd_this->wdctx_table ).
* @TODO handle non existant child
* IF lo_nd_table IS INITIAL.
* ENDIF.
* get element via lead selection
* alternative access via index
* lo_el_table = lo_nd_table->get_element( index = 1 ).
* @TODO handle not set lead selection
IF lo_el_table IS INITIAL.
ENDIF.
* navigate from <CONTEXT> to <table> via lead selection
lo_nd_table = wd_context->get_child_node( name = wd_this->wdctx_table ).
* @TODO handle non existant child
* IF lo_nd_table IS INITIAL.
* ENDIF.
lo_nd_table->get_static_attributes_table( IMPORTING table = lt_table ).
* @TODO handle non existant child
* IF lo_nd_table IS INITIAL.
* ENDIF.
** @TODO compute values
** e.g. call a model function
* navigate from <CONTEXT> to <table> via lead selection
lo_nd_table = wd_context->get_child_node( name = wd_this->wdctx_table ).
* @TODO handle non existant child
* IF lo_nd_table IS INITIAL.
* ENDIF.
** @TODO compute values
** e.g. call a model function
it_rows = lo_nd_table>get_selected_elements( ).
CALL METHOD lo_nd_table->GET_LEAD_SELECTION_INDEX
RECEIVING
INDEX = value .
LOOP AT it_rows INTO wa_rows.
CALL METHOD wa_rows->get_static_attributes
IMPORTING
static_attributes = ls_table.
READ TABLE lt_table INTO ls_table WITH KEY col1 = ls_table-col1.
ld_index = value.
ENDLOOP.
CLEAR : ls_table-col2,
ls_table-col2.
MODIFY lt_table INDEX ld_index FROM ls_table.
lo_nd_table->bind_table( new_items = lt_table set_initial_elements = abap_true ). -
Can retrieve value from one table, but not the other (exception thrown)
Hi
I hope some friendly soul can help me out here. I have a local Access database file. I am able to get a value from all tables except for one, which throws this error: "System.NullReferenceException:
Object reference has not been specified to an object".
The rather simple lines of code when working is this:
Dim email As Object
value = MyDataSet.Tables("Table")(0)(1).ToString
Msgbox(email)
However, when simply changing from "Table" to "AnotherTable", the exception is thrown. I
have seriously no idea why. I've made sure the datatypes are the same and that the values are not NULL.
What gives?Hello,
Going with your last reply, you should be accessing data via the strong typed classes that get generated.
Example using Microsoft Northwind database accessing the customers table in a MS-Access database. Note the check for Rows, we could even go farther if we are questioning issue with the data via try-catch statements writing errors to the IDE Output window.
I would highly recommend never referencing rows without first checking if there are rows and secondly never reference columns by ordinal index, always use the column name. One example with ordinal positioning, suppose someone did SomeDataTable.Columns("SomeColName").SetOrdinal(3)
and you expect the ordinal position to be 1 ? things will crash-n-burn. Food for thought :-)
Public Class Form1
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Me.CustomersTableAdapter.Fill(Me.MainDataSet.Customers)
End Sub
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
If MainDataSet.Customers.Rows IsNot Nothing Then
Dim FirstCompanyName As String = MainDataSet.Customers.FirstOrDefault.CompanyName
MessageBox.Show(FirstCompanyName)
Else
MessageBox.Show("No rows in customer table")
End If
End Sub
End Class
In this case we get the first record from below in Button1 Click
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem. -
Populating values on a table view
Hi,
Following is the xml webservice response:
<?xml version='1.0' encoding='utf-8'?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<ns:getAvailableResourcesResponse xmlns:ns="http://webservices.iphoneapps.com" xmlns:ax21="http://vo.iphoneapps.com/xsd">
<ns:return>JOHN</ns:return>
<ns:return>KATE</ns:return>
<ns:return>JOLIE</ns:return>
<ns:return>DOLSON</ns:return>
</ns:getAvailableResourcesResponse>
</soapenv:Body>
</soapenv:Envelope>
From the above xml I am trying to parse <ns:return>tags i am getting the output values as "JOHNKATEJOLIEDOLSON" but the I am unable to seperate those values and populate those values in the table view, one after the other.
Following is the code that i used for parsing:
-(void)parser:(NSXMLParser *)parser didStartElement:(NSString *)elementName namespaceURI:(NSString *) namespaceURI qualifiedName:(NSString *)qName
attributes: (NSDictionary *)attributeDict
if([ elementName isEqualToString:@"ns:return" ])
NSLog(@"ns:return");
if (!soapResults)
soapResults=[[NSMutableString alloc]init];
NSLog(@"%d", soapResults);
elementFound=YES;
-(void)parser:(NSXMLParser *) parser foundCharacters:(NSString *)string
if (elementFound)
//[arrayResources addObject:string];
[soapResults appendString: string];
NSLog(@"%@", soapResults);
[self release];
-(void)parser:(NSXMLParser *)parser didEndElement:(NSString *)elementName namespaceURI:(NSString *)namespaceURI qualifiedName:(NSString *)qName
if( [ elementName isEqualToString:@"ns:return" ])
elementFound=FALSE;
Can anyone please suggest me how to parse the xml statement and populate the values in the table view with sample example.
Regards
SRI.
Message was edited by: ksriOnly you can solve the issue by learning about namespaces. You are comparing element names against fully-qualified names. Then you are logging what you think you have received. Change your NSLog statements to log what is really being parsed instead of a literal. That should prove enlightening.
-
Issue in populating dynamic values in smartform
Hi Experts,
I am facing some serious alignment issue while populating dynamic values in smartform.
Through table, I am populating dynamic values in smart form. If my internal table contains 20 records , first 10 records are populating in first page and remaining records are populating in next page properly. But here issue is whenever that first 10 records are populated in first page system automatically leaves empty row at the end of page. Ideally it should not happen. please tell me how to solve this issue.
thanks
KarthikHi,
I was wondering how are the bold lines output, if you only have one line type... is the Table node executed multiple times under the loop node, where the bold text is implemented as separate text node..? It should IMO actually not affect the output of the table in any negative way if it's done so - just curious
With the "protect" I meant this baby:
You could also try to download and attach only the (upper) node involved in the output of table instead of whole form, if there is something in the form that should not be seen publicly...
cheers
Janis -
Friends,
I have made wrong entry in Fiscal year in through MMRV. Now to edit in MARV table I have gone to SE-16n. I have searched old threads. I have tried also for debugging. But it didn't happen. Is there other solution for this??
Or else I am doing something wrong in debugging that is the reason it is not getting edited. If screen shot is there in any threads it would be great help for me.
Thanks & regards,
SupriyoHi,
please explain you did wrong in MMRV - ok now you want post in previous Period-MM
Please use T code OMSY - check box - allow posting to previous period
Thanking you
Regards
Mahesh -
UPDATE value in column with value in SAME TABLE
Hi all,
Here's my issue...
I have a table which records all incidents for a person.
The table looks something like this:
tbl_connect(person_Id NUMBer,
OLD_ID VARCHAR2(24),
CASE_NUMBER VARCHAR2(10),
CASE_TYPE VARCHAR2(10),
PERSON_ROLE VARCHAR2(30),
INCIDENT_TYPE VARCHAR2(40));
The table is populated from a source table with all fields except person_id. Person_id is a sequence number that gets generated if the person comitting the incident is a NEW PERSON to our system. OLD_Id is the unique identifier between the source table and tbl_connect to identify a person.
The problem: If an existing person commits a new incident, a new record will be inserted into tbl_connect without PERSON_ID. Since the person already is in the database the person_id already exists in tbl_connect for that person. I now need to UPDATE person_id column with the person_id that already exists for this person. How can i achieve this.
Ive been trying all sorts of update queries but nothing seems to work. ANy help will be appreciated. Thanks in advance.Frank,
Thanks for the speedy reply. Here is a sample table.
I know it's a bit confusing. The data that is being dumped into this table is information from a old system. The OLD_ID is in here because it is the relationship between this table and the old table. PERSON_ID is new to this system to identify a person uniquely. That is why i need them both in this table for right now.
So say my tbl_connect got populated with new info from the old table. As you can see, old_id=567A has comitted another incident. Since he already exists in tbl_connect, now i need to update person_id with the value of 1. Does that make sense now????? If old_id did not exist, all i would do is insert a new row and set person_id to the next sequence number.
TBL_CONNECT
PERSON_ID OLD_ID CASE_NUMBER CASE_TYPE
1 567A 12345 IR
1 567A 15236 MV
567A 98547 IR<--newly inserted record of same person -
Create Value Set of Table Type
Hi,
Could you provide me a sample program for creating a value Set of Table type.
Thanks
Tim.Hi,
I was able to create value set (table type) from the System Administrator and attached the value set to the Inventory Kanban DFF Form.
I'm having issue here, value set is created on Custom Table which has data as below :
EX:- Custom table has Item_Num: 101 , Lot_Num: Lot_1 & Item_Num: 102 , Lot_Num: Lot_2
When I go into DFF form in Inventory for item_Num: 101 it should only allow to enter Lot_1 but it is accepting Lot_2 also.
I must be missing some where clause in the value set setup.
Any suggestions?
R12 Version.
Thanks
Tim. -
How to get string value from database table using Visual Studio 2005?
Hi,
Im developing plugin in illustrator cs3 using visual studio 2005. I need to get the values eneterd in database. Im able to get the integer values. But while getting string values it is returning empty value.
Im using the below code to get the values from database table
bool Table::Get(char* FieldName,int& FieldValue)
try
_variant_t vtValue;
vtValue = m_Rec->Fields->GetItem(FieldName)->GetValue();
FieldValue=vtValue.intVal;
CATCHERRGET
sprintf(m_ErrStr,"Success");
return 1;
Im using the below code to get the values.
AIErr getProjects()
char buf[5000];
int i;
std::string catName;
::CoInitialize(NULL);
Database db;
Table tbl;
errno_t err;
err = fopen(&file,"c:\\DBResult.txt","w");
fprintf(file, "Before Connection Established\n");
//MessageBox(NULL,CnnStr,"Connection String",0);
if(!db.Open(g->username,g->password,CnnStr))
db.GetErrorErrStr(ErrStr);
fprintf(file,"Error: %s\n",ErrStr);
fprintf(file, "After Connection Established\n");
if(!db.Execute("select ProjectID,ProjectName from projectsample",tbl))
db.GetErrorErrStr(ErrStr);
fprintf(file,"Error: %s\n",ErrStr);
int ProjectID;
int UserID;
int ProjectTitle;
char ProjectName[ProjectNameSize];
if(!tbl.ISEOF())
tbl.MoveFirst();
ProjectArrCnt=0;
for(i=0;i<128;i++)
buf[i]='\0';
int j=0;
while(!tbl.ISEOF())
if(tbl.Get("ProjectID",ProjectID))
fprintf(file,"Project ID: %d ",ProjectID);
ProjectInfo[ProjectArrCnt].ProjectID = ProjectID;
sprintf(buf,"%d",ProjectID);
//MessageBox(NULL, buf,"f ID", 0);
j++;
else
tbl.GetErrorErrStr(ErrStr);
fprintf(file,"Error: %s\n",ErrStr);
break;
//if(tbl.Get("ProjectTitle",ProjectName))
if(tbl.Get("ProjectName",ProjectName))
MessageBox(NULL,"Inside","",0);
fprintf(file,"ProjectTitle: %s\n",ProjectName);
//catName=CategoryName;
ProjectInfo[ProjectArrCnt].ProjectName=ProjectName;
//sprintf(buf,"%s",ProjectName);
MessageBox(NULL,(LPCSTR)ProjectName,"",0);
else
tbl.GetErrorErrStr(ErrStr);
fprintf(file,"Error: %s\n",ErrStr);
break;
ProjectArrCnt++;
//MessageBox(NULL, "While", "WIN API Test",0);
tbl.MoveNext();
//MessageBox(NULL, ProjectInfo[i].ProjectName.c_str(),"f Name", 0);
::CoUninitialize();
//sprintf(buf,"%s",file);
//MessageBox(NULL,buf,"File",0);
fprintf(file, "Connection closed\n");
fclose(file);
for(i=0;i<ProjectArrCnt;i++)
sprintf(buf,"%i",ProjectInfo[i].ProjectID);
//MessageBox(NULL,buf,"Proj ID",0);
//MessageBox(NULL,ProjectInfo[i].ProjectName.c_str(),"Project Name",0);
return 0;
In the above code im geeting project D which is an integer value. But not able to get the project name.
Please some one guide me.As I said in the other thread, this really isn't the place to ask questions about a database API unrelated to the Illustrator SDK. You're far more like to find people familliar with your problem on a forum that is dedicated to answering those kinds of questions instead.
-
CE function to get distinct values from Column table
Hi All,
Could you please let me know the appropriate CE function to get the distinct values from column table.
IT_WORK = SELECT DISTINCT AUFNR FROM :IT_WO_DETAILS;
Thank you.Hi,
If you have 10g, you can use Model( with model performance is better than connect by )
Solution
========================================================================
WITH t AS
(SELECT '0989.726332, 1234.567432, 3453.736379, 3453.736379, 0989.726332, 3453.736379, 1234.567432, 1234.567432, 0989.726332'
txt
FROM DUAL)
SELECT DISTINCT TRIM(CHAINE)
FROM T
MODEL
RETURN UPDATED ROWS
DIMENSION BY (0 POSITION)
MEASURES (CAST( ' ' AS VARCHAR2(50)) AS CHAINE ,txt ,LENGTH(REGEXP_REPLACE(txt,'[^,]+',''))+1 NB_MOT)
RULES
(CHAINE[FOR POSITION FROM 1 TO NVL(NB_MOT[0],1) INCREMENT 1] =
CASE WHEN NB_MOT[0] IS NULL THEN TXT[0] ELSE REGEXP_SUBSTR(txt[0],'[^,]+',1,CV(POSITION)) END );
=========================================================================
Demo
=======================================================================
SQL> WITH t AS
2 (SELECT '0989.726332, 1234.567432, 3453.736379, 3453.736379, 0989.726332, 3453.736379, 123
4.567432, 1234.567432, 0989.726332'
3 txt
4 FROM DUAL)
5 SELECT DISTINCT TRIM(CHAINE)
6 FROM T
7 MODEL
8 RETURN UPDATED ROWS
9 DIMENSION BY (0 POSITION)
10 MEASURES (CAST( ' ' AS VARCHAR2(50)) AS CHAINE ,txt ,LENGTH(REGEXP_REPLACE(txt,'[^,]+',''))+1 NB_MOT)
11 RULES
12 (CHAINE[FOR POSITION FROM 1 TO NVL(NB_MOT[0],1) INCREMENT 1] =
13 CASE WHEN NB_MOT[0] IS NULL THEN TXT[0] ELSE REGEXP_SUBSTR(txt[0],'[^,]+',1,CV(POSITION)) END );
TRIM(CHAINE)
3453.736379
1234.567432
0989.726332
SQL>
======================================================================== -
Copy selected values from a table control into another table control
hi there,
as seen in the subject i need to copy selected values from a table control into another table control in the same screen. as i dont know much about table controls i made 2 table controls with the wizard and started to change the code... right now im totally messed up. nothing works anymore and i don't know where to start over.
i looked up the forums and google, but there is nothing to help me with this problem (or i suck in searching the internet for solutions)
i have 2 buttons. one to push the selected data from the top table control into the bottom tc and the other button is to push selected data from the bottom tc into the top tc. does somebody has a sample code to do this?you're funny
i still don't get it... can't believe, there is no tutorial or sample code around how to copy multiple selected rows from a tc.
here's my code, maybe you can tell me exactly were i have to change it:
tc1 = upper table control
tc2 = lower table control
SCREEN 0100:
PROCESS BEFORE OUTPUT.
MODULE status_0100.
MODULE get_nfo. --> gets data from the dictionary table
MODULE tc1_change_tc_attr.
LOOP AT it_roles_tc1
INTO wa_roles_tc1
WITH CONTROL tc1
CURSOR tc1-current_line.
ENDLOOP.
MODULE tc2_change_tc_attr.
LOOP AT it_roles_tc2
INTO wa_roles_tc2l
WITH CONTROL tc2
CURSOR tc2-current_line.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT it_roles_tc1.
CHAIN.
FIELD wa_roles_tc1-agr_name.
FIELD wa_roles_tc1-text.
ENDCHAIN.
FIELD wa_roles_tc1-mark
MODULE tc1_mark ON REQUEST.
ENDLOOP.
LOOP AT it_roles_tc2.
CHAIN.
FIELD wa_roles_tc2-agr_name.
FIELD wa_roles_tc2-text.
ENDCHAIN.
FIELD wa_roles_tc2-mark
MODULE tc2_mark ON REQUEST.
ENDLOOP.
MODULE ok_code.
MODULE user_command_0100.
INCLUDE PAI:
MODULE tc1_mark INPUT.
IF tc1-line_sel_mode = 2
AND wa_roles_tc1-mark = 'X'.
LOOP AT it_roles_tc1 INTO g_tc1_wa2
WHERE mark = 'X'. -
> big problem here is, that no entry has an 'X' there
g_tc1_wa2-mark = ''.
MODIFY it_roles_tc1
FROM g_tc1_wa2
TRANSPORTING mark.
ENDLOOP.
ENDIF.
MODIFY it_roles_tc1
FROM wa_roles_tc1
INDEX tc1-current_line
TRANSPORTING mark.
ENDMODULE. "TC1_MARK INPUT
MODULE tc2_mark INPUT.
IF tc2-line_sel_mode = 2
AND wa_roles_tc2-mark = 'X'.
LOOP AT it_roles_tc2 INTO g_tc2_wa2
WHERE mark = 'X'. -
> same here, it doesn't gets any data
g_tc2_wa2-mark = ''.
MODIFY it_roles_tc2
FROM g_tc2_wa2
TRANSPORTING mark.
ENDLOOP.
ENDIF.
MODIFY it_roles_tc2
FROM wa_roles_tc2
INDEX tc2-current_line
TRANSPORTING mark.
ENDMODULE.
thx for anybody who can help with this! -
How to retrieve 2 values from a table in a LOV
Hi
I'm pretty new to APEX. I try to retrieve two values from a table using a LOV. I have a table named DEBIT with then columns SITE, NAME and KEY
I want to display NAME to the user in a list. When the user select an item from the list, I want to retrieve the data of the SITE and KEY column of this item in order to launch an SQL command based on this two values.
How to retrieve thes two values whant the user chooses an item from the list ?
I apologize for my english, being french.
Regards.
ChristianChristian,
From what I understood about your requirement, you want a 'select list with submit' which displays "NAME" and based on the value selected, you want to get the corresponding values for "SITE" and "KEY" from the table.
<b>Step 1: Create a select list with submit, say P1_MYSELECT </b><br><br>
Use something like this in the dynamic list of values for the select list: <br>
SELECT NAME display_value, NAME return_value
FROM DEBIT<br><br>
<b>Step 2: Create a page process of type PL/SQL block. Also create 2 hidden items P1_KEY and P1_SITE. </b><br><br>
In the PL/sQL, write something like:
DECLARE
v_key DEBIT.KEY%TYPE;
v_site DEBIT.SITE%TYPE;
CURSOR v_cur_myvals IS
SELECT KEY, SITE
FROM DEBIT
WHERE NAME = :P1_MYSELECT;
BEGIN
OPEN v_cur_myvals;
LOOP
FETCH v_cur_myvals
INTO v_key,v_site;
EXIT WHEN v_cur_myvals%NOTFOUND;
:P1_KEY := v_key;
:P1_SITE := v_site;
END LOOP;
CLOSE v_cur_myvals;
END; <br><br>
Then you can use these values for whatever purpose you need to.
Hope this helps.
Maybe you are looking for
-
i have got an iphone 3g and when i got it it was jailbroken so i went to restore it but it failed now it says i need to plug it into itunes all the time. what do i do?
-
My I Pod works sometimes.Reset ?
I got an I Pod Touch a short time ago and thought I mastered it.However problems have now started whereby I have now lost most of my I Tunes Library(Approx 400 songs),which has now been found in a mxl file?I do not know how this has happened!Furtherm
-
The sound cuts out while a track is playing in iTunes. Are their any fixes for this?
The sound randomly cuts out while a track is playing in iTunes. The track has to be stopped and restarted before sound returns. Are their any fixes for this?
-
Internal error 2356. Has anyone seen this
I have done everything to reinstall itunes. When it is just about finished installing a message reading: Internal Error 2356.Data1.cab and Installation of Quicktime did not complete succesfully. I tried installing quicktime alone and with itunes, nei
-
Cost tracking and Reporting tools
Hi, is it possible to track Project cost directly or only on ressource bases. What I mean excatlly is, can I assign to different Project Member a per day salary or per Hour ? Or can I only see how many man-days ar assigned to the Project ? Also I'm i