Issue in Selection Screen of ABAP report after executing it using TCode

Hi,
I have one Z program having a selection screen for it. One selection variable is non editable for the users (has default value) whereas user can enter the value in other selection variable.
To make the first variable non editable, I have used the following code.
INITIALIZATION.
  LOOP AT SCREEN.
    IF screen-name = 'P_USER'.
      screen-input = 0.
      MODIFY SCREEN.
    ENDIF.
  ENDLOOP.
Now when I execute this program from SE38, it works fine. But when I execute it using a Tcode (assigned in SE93), the first variable also become editable for users.
How can I keep the first variable non editable even after executing the program using a Tcode?
Regards,
Yogesh

Hi,
It seems you create a Transaction type: Dialog transaction.
Delete current transaction and create one with Transaction type: Report transaction (radio button in row 2nd)
regards,

Similar Messages

  • Selection screen in abap report

    Hi,
    I am using 2 selection options in my report.
    But the list of values for second selection options is depends on the selected value in the first selection option.
    how to do this.
    because i cant use selected value of first option in AT-SELECTION point.

    Hi again,
    1. There are 2 list box on selection-screen.
    2. 1st shows all company code, and company text.
    3. On selecting the first,
       the second is populated.
      (it selects again from T001
       and shows the same company information)
    4.
    REPORT abc.
    TYPE-POOLS: vrm.
    DATA: it_val TYPE vrm_values.
    DATA: ekk TYPE vrm_values.
    Sel Screen.
    PARAMETERS         p_diff LIKE t001-bukrs AS LISTBOX
                  VISIBLE LENGTH 16
                  USER-COMMAND ab.
    PARAMETERS     hh LIKE ekko-ebeln AS LISTBOX
                  VISIBLE LENGTH 16 .
    AT SELECTION-SCREEN OUTPUT.
      REFRESH it_val.
      CLEAR it_val.
      SELECT bukrs butxt FROM t001 INTO TABLE it_val.
      CALL FUNCTION 'VRM_SET_VALUES'
        EXPORTING
          id     = 'P_DIFF'
          values = it_val.
    Second List Box
      REFRESH ekk.
      CLEAR ekk.
      SELECT bukrs butxt
      FROM t001
      INTO TABLE ekk
      WHERE bukrs = p_diff.
      clear hh.
      CALL FUNCTION 'VRM_SET_VALUES'
        EXPORTING
          id     = 'HH'
          values = ekk.
    regards,
    amit m.

  • What is the need of END-OF-SELECTION event in ABAP reporting

    Hi,
    Can anyone explain the need of the END-OF-SELECTION event in ABAP Reports?
    This event is used to terminate the previous event. Is that right? or is there any specific use of it?
    and when exactly we use this event while writing a report? I mean what purpose?
    Thanks,
    Paddu.

    Hi,
    END-OF-SELECTION makes more sense when you are using logical database in your program.
    See these links.
    http://help.sap.com/saphelp_46c/helpdata/en/34/8e74266df74873e10000009b38f9b8/frameset.htm
    http://help.sap.com/saphelp_46c/helpdata/en/9f/db9aca35c111d1829f0000e829fbfe/frameset.htm
    After all the data has been selected END-OF-SELECTION event writes the data to the screen
    The END-OF-SELECTION event is triggered in executable programs once the logical database has finished reading all data and before the list processor is started.
    Try to go thro this link.
    http://help.sap.com/saphelp_46c/helpdata/en/9f/db9a1435c111d1829f0000e829fbfe/frameset.htm
    Mostly end-of-selection is used in logical data base. It is not mandatory.
    Ex:
    If you use a logical database in your report then this event is mandatory because when all the data selection from the database is finished this events get triggers.
    For example if you are populating a internal table using a logical data base event 'GET' then you need this event because if you don't use this you get display again and again for each selection.
    START-OF-SELECTION.
    GET PERNR.
    itab-pernr = pernr-pernr.
    append itab.
    *this get triggers after all selection from database.
    END-OF-SELECTION.
    loop at itab.
    write:/ itab-pernr.
    endloop.
    Regards,
    Padmam.

  • How to call a sub screen from abap report

    Hellow friends,
    how to call sub screen 1001 prog name SAPLMGD1
    and main program SAPLMGMM screen 4000 of tcode MM02.
    i need to call the sub screen from abap report

    Hi Rajesh,
    You can use FM MATERIAL_MAINTAIN_DIALOGUE to go to subcreen MRP1 in MM02.
    Please check this sample code from other thread and enter 'MRP 1' for p_dytxt.
    REPORT zsritest.
    TABLES mara.
    DATA: lv_bilds LIKE t133a-bilds,
    ls_t130m LIKE t130m,
    ls_rmmg1 LIKE rmmg1,
    lwa_view TYPE mbildtab,
    lwa_auswg TYPE mgauswg,
    lt_views TYPE STANDARD TABLE OF mbildtab INITIAL SIZE 0,
    lt_auswg TYPE STANDARD TABLE OF mgauswg INITIAL SIZE 0.
    PARAMETERS: p_matnr LIKE mara-matnr,
    p_werks LIKE marc-werks,
    p_dytxt LIKE mbildtab-dytxt.
    SELECT SINGLE * FROM mara WHERE matnr EQ p_matnr.
    CHECK sy-subrc EQ 0.
    CALL FUNCTION 'T130M_SINGLE_READ'
    EXPORTING
    tcode = 'MM02'
    kzrfb = 'X'
    IMPORTING
    wt130m = ls_t130m
    EXCEPTIONS
    not_found = 1
    wrong_call = 2
    OTHERS = 3.
    CALL FUNCTION 'BILDSEQUENZ_IDENTIFY'
    EXPORTING
    branche = mara-mbrsh
    materialart = mara-mtart
    tcode_ref = ls_t130m-trref
    * KZRFB = ' '
    IMPORTING
    bildsequenz = lv_bilds
    * KZ_BILDS_CHANGED =
    EXCEPTIONS
    wrong_call = 1
    not_found = 2
    OTHERS = 3.
    CALL FUNCTION 'SELECTION_VIEWS_FIND'
    EXPORTING
    bildsequenz = lv_bilds
    pflegestatus = mara-pstat
    TABLES
    bildtab = lt_views[]
    EXCEPTIONS
    call_wrong = 1
    empty_selection = 2
    OTHERS = 3.
    ls_rmmg1-matnr = mara-matnr.
    ls_rmmg1-werks = p_werks.
    READ TABLE lt_views INTO lwa_view WITH KEY dytxt = p_dytxt.
    CHECK sy-subrc EQ 0.
    lwa_auswg-auswg = lwa_view-auswg.
    APPEND lwa_auswg TO lt_auswg.
    CALL FUNCTION 'MATERIAL_MAINTAIN_DIALOGUE'
    EXPORTING
    irmmg1 = ls_rmmg1
    * IRMMG1_REF = ' '
    KZ_EIN_DARK = 'X'
    t_tcode = 'MM02'
    * FLG_MATNR_RES = ' '
    p_pstat = mara-pstat
    * FLG_STAT_ALL = ' '
    * CALL_MODE2 = ' '
    * IMPORTING
    * MATERIAL_NO =
    * UPDATE_OK =
    TABLES
    iauswg = lt_auswg[]
    EXCEPTIONS
    no_authority = 1
    OTHERS = 2.
    IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    * WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Regards,
    Ferry Lianto

  • Error when generating the selection screen "1000"  for Report ztest

    Hi Experts,
    I am getting this strange error while trying to activate my report. I simply copy paste report from my other system to new system it was working fine there. I also created all include program etc.
    While I am trying to create "Selection-text" it is giving message that "Program contain some serious syntax error" while checking syntax saying that "Program is syntactically right".
    Any idea how to solve this???
    Regards,
    Gourav

    Here is the code::::
    SELECTION-SCREEN BEGIN OF BLOCK select  WITH FRAME TITLE text-sl1.
    Component
    SELECT-OPTIONS:
           s_xcide            FOR gw_zsmmess_compo-xcide
                              NO INTERVALS
                              MATCHCODE OBJECT zsm_xcide_oi.
    SELECTION-SCREEN END OF BLOCK select.
    SELECTION-SCREEN BEGIN OF BLOCK prcopt  WITH FRAME TITLE text-sl2.
    Default severity code
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT  1(30) text-dsc.
    SELECTION-SCREEN POSITION 33.
    PARAMETERS: p_dfsevc   LIKE gw_zsmglob_sever-sevco
                           OBLIGATORY
                           MATCHCODE OBJECT zsm_sevco
                           DEFAULT '3'.
    SELECTION-SCREEN COMMENT 37(30) pt_sevtx.
    SELECTION-SCREEN END OF LINE.
    Minutes to wait before re-issuing alert
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT  1(30) text-ria.
    SELECTION-SCREEN POSITION 33.
    PARAMETERS: p_aleexp(3) TYPE n
                            OBLIGATORY
                            DEFAULT '45'.
    SELECTION-SCREEN COMMENT 37(10) text-min.
    SELECTION-SCREEN END OF LINE.
    Use component specific parameters Yes/No
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT  1(30) text-cpu.
    SELECTION-SCREEN POSITION 33.
    PARAMETERS: p_usecsp   RADIOBUTTON GROUP rg1  DEFAULT 'X'.
    SELECTION-SCREEN COMMENT 35(10) text-rby    FOR FIELD p_usecsp.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN POSITION 33.
    PARAMETERS: p_dnucsp   RADIOBUTTON GROUP rg1.
    SELECTION-SCREEN COMMENT 35(10) text-rbn    FOR FIELD p_dnucsp.
    SELECTION-SCREEN END OF LINE.
    Create/update component specific parameters automatically
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT  1(32) text-cpc.
    SELECTION-SCREEN POSITION 33.
    PARAMETERS: p_updcsp   RADIOBUTTON GROUP rg2.
    SELECTION-SCREEN COMMENT 35(10) text-rby    FOR FIELD p_updcsp.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN POSITION 33.
    PARAMETERS: p_dnccsp   RADIOBUTTON GROUP rg2  DEFAULT 'X'.
    SELECTION-SCREEN COMMENT 35(10) text-rbn    FOR FIELD p_dnccsp.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT  1(30) text-afo.
    SELECTION-SCREEN POSITION 33.
    Fire one alert per component/error type combination
    PARAMETERS: p_afrerr   RADIOBUTTON GROUP rg3  DEFAULT 'X'.
    SELECTION-SCREEN COMMENT 35(50) text-afe    FOR FIELD p_afrerr.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN POSITION 33.
    Fire one alert per component (= outbound XI interface)
    PARAMETERS: p_afrcom   RADIOBUTTON GROUP rg3.
    SELECTION-SCREEN COMMENT 35(50) text-afc    FOR FIELD p_afrcom.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN POSITION 33.
    Fire one alert per run
    PARAMETERS: p_afrrun   RADIOBUTTON GROUP rg3.
    SELECTION-SCREEN COMMENT 35(50) text-afr    FOR FIELD p_afrrun.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT  1(30) text-sel.
    SELECTION-SCREEN POSITION 33.
    Select messages since last run
    PARAMETERS: p_lstrun   RADIOBUTTON GROUP rg4  DEFAULT 'X'.
    SELECTION-SCREEN COMMENT 35(40) text-slr    FOR FIELD p_lstrun.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN POSITION 33.
    Select messages in selected interval
    PARAMETERS: p_mintvl   RADIOBUTTON GROUP rg4.
    SELECTION-SCREEN COMMENT 35(40) text-sin    FOR FIELD p_mintvl.
    SELECTION-SCREEN END OF LINE.
    Message selection interval
    SELECTION-SCREEN BEGIN OF BLOCK msgfilt WITH FRAME TITLE text-msf.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT  1(10) text-icr.
    SELECTION-SCREEN COMMENT 14(05) text-ifr.
    SELECTION-SCREEN COMMENT 25(05) text-dat       FOR FIELD p_stadat.
    Select messages - start date
    PARAMETERS: p_stadat   TYPE d.
    SELECTION-SCREEN COMMENT 46(05) text-tim       FOR FIELD p_statim.
    Select messages - start time
    PARAMETERS: p_statim   TYPE t.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 14(05) text-ito.
    SELECTION-SCREEN COMMENT 25(05) text-dat       FOR FIELD p_enddat.
    Select messages - end date
    PARAMETERS: p_enddat   TYPE d                  DEFAULT sy-datum.
    SELECTION-SCREEN COMMENT 46(05) text-tim       FOR FIELD p_endtim.
    Select messages - end time
    PARAMETERS: p_endtim   TYPE t                  DEFAULT sy-timlo.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF BLOCK msgfilt.
    SELECTION-SCREEN END OF BLOCK prcopt.
    SELECTION-SCREEN BEGIN OF BLOCK testopt WITH FRAME TITLE text-tso.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT  1(10) text-tst.
    SELECTION-SCREEN POSITION 33.
    List only, no updates
    PARAMETERS: p_lstonl    RADIOBUTTON GROUP rg5  DEFAULT 'X'.
    SELECTION-SCREEN COMMENT 35(14) text-tsl       FOR FIELD p_lstonl.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN POSITION 33.
    Execute updates
    PARAMETERS: p_update    RADIOBUTTON GROUP rg5.
    SELECTION-SCREEN COMMENT 35(14) text-tsu       FOR FIELD p_update.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF BLOCK testopt.
    *eject
    INITIALIZATION.

  • Functional area(FKBER field in the selection screen of the report painter))

    Hi,
    I have a requirement to add functional area field in the selection screen for a report painter report. This report using library 1VK and table 'CCSS'. I added functional area field in the general data selection . After the execution of report with functional area field filled with value. report not giving any output. do i need to maintain any setting to achieve?
    Regards,
    Palani

    1. Call GR22 and click "Characteristics".
    2. Check FKBER and assign a position number to it.
    3. Save and close the library.
    4. Call your report in GRR2 and you should now see FKBER as an available characteristic.
    5. Use it in the General Data Selection or as a Lead Column, as per requirement.
    Or,
    1. Call GR21 and create a custom library. Provide a name and description and also provide a library you can copy from (scan for the best-fit library).
    2. Now follow the steps 2 through 5 above to achieve your result.
    Hope this helps.
    Cheers.

  • Multiple selection lists in abap report

    I need to populate a multiple selection list and then read the selection in an ABAP report. A parameter with list box is not solving my purpose.
    Please give any suggestion on this.

    Hi
    If you can't use the SELECT-OPTION statament, there's no standard solution.
    U can only try to create a table control with only one colunm and every hit of the table control is a single hit for the selection.
    To insert a table control in a selection-screen u need to use the statament:
    SELECTION-SCREEN BEGIN OF TABBED (see the help)
    In order to create a TAB where u can load a subscreen where u can insert a table control.
    The u need to transfer the hit from table control to a range.
    Max

  • 2 selection screen in one report.

    hi,
    i need to have 2 selection screen in one report....based on the input of 1st selection screen i need to display another selection screen. The 1st selection screen consist of three radio buttons....selecting one of them should allow me to further input data....
    i tried user command, modif id...but the problem is the 2nd selection screen is also displayed initially and den after clickin d radio button i get only the 2nd selection screen...
    i cannot use module pool programming coz of user requirement.
    could anybody help with the code??

    Hi
    Please this code ..
    SELECTION-SCREEN: BEGIN OF BLOCK c1 WITH FRAME TITLE text-001.
    Upload table
    PARAMETER: p_upload TYPE char01  RADIOBUTTON GROUP rsel
                        DEFAULT 'X'  USER-COMMAND ucomm,
    Edit Tables
               p_edt_tb TYPE  char01 RADIOBUTTON GROUP rsel.
    SELECTION-SCREEN: END OF BLOCK c1.
    Upload table
    SELECTION-SCREEN: BEGIN OF BLOCK c2 WITH FRAME TITLE text-002.
    PARAMETERS: p_tab   TYPE char16     MODIF ID m1,
                p_comp  TYPE char18     MODIF ID m1,
                p_plant TYPE werks_d    MODIF ID m1,
                p_excel TYPE localfile  MODIF ID m1.
    SELECTION-SCREEN: END OF BLOCK c2.
    Edit Table
    SELECTION-SCREEN: BEGIN OF BLOCK c3 WITH FRAME TITLE text-003.
    Replace component
    PARAMETER: p_rp_cmp TYPE char01  RADIOBUTTON GROUP edtb
                          DEFAULT 'X' USER-COMMAND ucomm MODIF ID m2,
    Edit Lines
               p_edt_ln TYPE  char01 RADIOBUTTON GROUP edtb MODIF ID m2.
    SELECTION-SCREEN: END OF BLOCK c3.
    SELECTION-SCREEN: BEGIN OF BLOCK c4 WITH FRAME TITLE text-004.
    Replace component
    PARAMETERS: p_tab_r   TYPE char16 MODIF ID m3,   "Assembly Table Name
                p_comp_r  TYPE char18 MODIF ID m3.   "Upload Table Name
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 1(31)  FOR FIELD p_fcomp  MODIF ID m3.
    PARAMETER: p_fcomp  TYPE zpart  MODIF ID m3.
    SELECTION-SCREEN COMMENT 62(20) FOR FIELD p_tcomp  MODIF ID m3.
    PARAMETER  p_tcomp  TYPE zpart  MODIF ID m3.
    SELECTION-SCREEN END OF LINE.
    Edit Lines
    PARAMETERS: p_fexcel TYPE localfile  MODIF ID m4,
                p_texcel TYPE localfile  MODIF ID m4.
    SELECTION-SCREEN: END OF BLOCK c4.
    SELECTION-SCREEN: BEGIN OF BLOCK c5 WITH FRAME TITLE text-005.
    validate data
    PARAMETERS: p_valid AS CHECKBOX DEFAULT space
                        USER-COMMAND ucomm MODIF ID m5,
    Background Processing
                p_back  AS CHECKBOX DEFAULT space
                        USER-COMMAND ucomm.
    SELECTION-SCREEN: END OF BLOCK c5.
    AT SELECTION-SCREEN OUTPUT.
    Design selection parameters dynamically
      PERFORM sub_set_file_param.
    FORM sub_set_file_param .
      LOOP AT SCREEN.
    If Upload is check
        IF  NOT  p_upload IS INITIAL.
          IF screen-group1 = 'M2' OR
             screen-group1 = 'M3' OR
             screen-group1 = 'M4'.
            screen-active = 0.
          ENDIF.
        ELSE.
    If Edit Tables is check
          IF screen-group1 = 'M1'.
            screen-active = 0.
          ENDIF.
        ENDIF.
    If Replace Component is check
        IF p_rp_cmp IS NOT INITIAL.
          IF screen-group1 = 'M4' OR
             screen-group1 = 'M5'.
            screen-active = 0.
          ENDIF.
        ELSE.
    If Edit Lines is check
          IF screen-group1 = 'M3'.
            screen-active = 0.
          ENDIF.
        ENDIF.
    Modify the screen
        MODIFY SCREEN.
      ENDLOOP.
    ENDFORM.

  • Issu in selection screen tabstip

    Dear all,
    i have issue in selection screen tab control, i have 3 tab on screen when i execute the report using 3 tab and come back on selection screen then cursor default move on  first tab, i want to stop control on my current tab.
    thanks in advance ,
    Abhilash

    Hi ,
    When we create the Tabs,we set one tab as default by passing the activetab attribute.
    So when passing the control back to the tab,we need to set the tab in which user has previously done an action into the " activetab" attribute by either using the cursor properties or any other logic suited to the requirement.
    Please Check the Program : DEMO_DYNPRO_TABSTRIP_LOCAL
    Hope it Helps
    Regards
    Byju

  • SUBMIT an ABAP report after creating the WI but before completion of WI.

    Dear All,
    I am having an activity which sends the approval work item.
    Now my requirement is to SUBMIT an ABAP report after creating the WI but before completion of WI.
    I can not call this report before approval activity because i need to pass this WI ID to this report.
    Please suggest some way to solve this.
    Regards,
    Amar

    Hello,
    You could create a 2-from-2 fork and put the workitem in one branch and the report in the other. Have the report branch wait 1 minute and then read the workitem id from the other branch.
    What is the purpose of this report? Why does it need the workitem id?
    regards
    Rick Bakker
    hanabi technology

  • How to display the sort value in the selection screen in the report title

    Dear All,
    How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
    Good day,
    Thanks and regards
    Arun S

    Hi Arun,
    Try this.
    1, Set one dynamic parameter,
    2, Drag and drop that parameter into  your report title.
    3, Pass the value(sort value) dynamically from your application,
    4, Cheers..
    Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then  set the data source from CR designer. and darg and drop that data column into the report.
    Hope this will work,
    Regards,
    Salah
    Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

  • Difficulty in adding new parameter in selection screen of GR55 report

    Hi Gurus,
    I have a requirement to add an extra field in Cost center:Act/Plan/Comm CC Cur report.This is otherwise a Z report in report painter with 0% code (T-code : GR55-> Report group->Report).But,when we go to technical information of this report,it has four standard sap programs,which contains code for this selection screen.It does not even have a modification scope.
    Selection screen of this report contains following parameters:
    Selection values:
    Controlling Ar
    Fiscal Year
    From Period
    To Period
    Plan Version
    Selection Groups:
    Cost Center Group
    Or value(s)
    Cost Element Group
    Or value(s)
    My requirement is to add one more parameter : Purchase oeder in new block:
    Is there any way to achieve it.
    Note: Copying the standard progs into custom prog is not working,i already tried that.
    Please let me know your suggestions,if any one of you came across such requirement before.it is very impoertant for me.
    Thanks in advance,
    Meenakshi

    Hi  meenakshi239,
    you can always use implicit enhancement spots.
    Regards,
    Clemens

  • Passing values to a dynamic selection screen via a report

    Hi,
    I have the following problem and need to seek your expertise urgently.
    In my program, I need to call another report by passing in parameters to the selection screen of other report. However, I could not pass values into a dynamic selection screen. I tried to use submit (report) with free selection but do not know how it works.
    Currently, I tried calling the function RS_REFRESH_FROM_DYNAMICAL_SEL and FREE_SELECTIONS_RANGE_2_EX. Using the object the first function has returned to me, I tried to append values such as fieldname etc to it. However, I realised the field names of a dynamic selection screen keeps changing. So I would not know how to pass a particular value to a selection field.
    Appreciate any help given.
    Thanks,
    CK

    Hello CK,
    Are you using logical database in your selection screen program attributes? If it is, look at include file DBxxxSEL for parameter named xxxDYNSE where xxx = logical database. Debug the program that has that dynamic selection, and look at field xxxDYNSE. This should give you a hint on how to populate the parameter when you submit the program.

  • Getting two selection screen in one report

    Hello Friends,
    I am Making report, In my report on first screen i have given two pushbutton, like this :
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001.
    PARAMETERS : p1_but RADIOBUTTON GROUP g1,
                             p2_but RADIOBUTTON GROUP g1.
    SELECTION-SCREEN END OF BLOCK b2.
    now i want when user click on any one pushbutton it shows another selection screen, whose select options are:
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
    SELECT-OPTIONS: so_erdat FOR lf_date,
                    so_vbeln FOR lf_vbeln MATCHCODE OBJECT zvbeln..
    SELECTION-SCREEN END OF  BLOCK b1.
    Please guide me can i use two selection screen in one report?, If yes then how can I use? Please revert back me as soon as possible.........

    Hi,
    you can achieve it only by using two USER_DEFINE_SELECTION SCREEN.
    For detail check the link
    http://help.sap.com/saphelp_nw04/helpdata/EN/9f/dba83d35c111d1829f0000e829fbfe/content.htm
    Regards,
    anirban

  • How to force selection screen in WAD Report

    Hi Gurus,
    How do we force a variable selection screen in WAD Report. We are in SP 10.
    Thanks
    Syed

    Hi Karthik,
    Iam not sure for some reason, when I select web_template and click on Web Parameters, there nothing available below Behaviour section. However when I create a new Analysis Item and see its properties, the Behaviour section shows only Allow Navigation & Only Hierarchy options.
    Should I reinstall my front end. We are in SP10.
    Appreciate your response.

Maybe you are looking for