Issue in update of PA & PD data using same form scenario

Hi All,
     We're in the process of implementing HCM PF.  As per the requirement the form should be able to change PA, PSA, EG, ESG and Job of a position on PD & PA(of corresponding pernr) side.  The process is started as a PA form (selection by pernr). 
     I'm able to change the PA, PSA, EG, ESG of the position attribute but whenever I change the Job it gets updated on the PD side but not the PA side (it still holds the previous job prior to effective date).
     In my form scenario I have one PA & one PD service.
     Any help will be appreciated and rewarded in resolving this issue.
Thanks,
Mani.
Edited by: mramamoorthy on Mar 14, 2011 7:01 PM

Hi,
Please check ur ISR Scenario,:
Goto-> Process Form Scenario for Personnel Admin. Infotypes (Service SAP_PA):
Define Operations:
0001->M change
Define Assignment of Fields:
Field Name     Number     Infotype     Subtype     Screen Structure                       Field Name     Data Index
Job     1     0001     1     HCMT_BSP_PA_XX_R0001     Job     1
and do Synchronizing Form Fields.
Then Do->Check Consistency of Form Scenarios in IMG activity.
If you get green light then all configuration are correctly update.
Otherwise problem in configuration side.
Thanks

Similar Messages

  • HCM Processes and Forms : Using single Form Scenario for Multiple Countries

    Hi ,
    I have a requirement to design a HCM P&F form ( Single Process, Single Form Scenario ) to support multiple countries.  Form fields should be visible/invisible based on the country ( derived from the login Manager).  please help me with the following questions.
    1. Is it right way to enable/disable the fields in the same form scenario for multiple countries ( Approx. 20-25 countries)
    2. Is there any limitation to no. of fields on the form? does the form performs well with multiple dynamic conditions?
    3. If yes, what is the best way to do this? through Java Script / Back end Generic Service?
    Thanks in Advance,
    VR.

    Hi VR,
    1. Is it right way to enable/disable the fields in the same form scenario for multiple countries ( Approx. 20-25 countries)
    -You can use same form scenario or process for multiple countries if you are using fields based on international structure HCMT_BSP_PA_XX_R*. If you intend to use country specific fields then you may like to use different form scenario for different countries.
    2. Is there any limitation to no. of fields on the form? does the form performs well with multiple dynamic conditions?
    - As such there is no limiation for the fields.Yes, form performs well with multiple rule configurations.
    3. If yes, what is the best way to do this? through Java Script / Back end Generic Service?
    I interpret you would like to derive & show fields based on same backend logic, in that case you should generic service.
    If you want to show fields based on manager's logon then you should also use authorization BAdi.
    Regards
    Pooja

  • How to update software on multiple iPhones using same iTunes account?

    How to update software on multiple iPhones using same iTunes account?

    SeanB15 wrote:
    Here are more details on my situation which should help clarify things...
    I purchased three iPhone 4 models back when they first came out (for my family) that all share the same iTunes account for access to apps and music, but each phone/user still has his/her custom contact list, email accts, and select lists of apps and music from the one iTunes acct library.  The problem is (as I understand it) that I can only update the software on one of the three iPhones – the primary phone I used to setup the iTunes acct without wiping out the separate contact lists, etc. As it stands today... the first (primary) iPhone associated with the iTune acct has been updated with the latest software version 5.1.1 and sync'd up with all the apps, music, etc from the one iTune acct, while the other two iPhones are still running on the original software version 4.0.2 and are experiencing problems now. I was advised by AT&T back in January that it would be necessary to setup separate iTunes accts for the second and third iPhones in order to receive system updates and still be able to manage separate contact lists, etc. If I go this route, I assume we will lose all the apps on phones #2 and #3 that we have been "sharing"... correct? Since this AT&T advice was prior to iCloud coming out, would iCloud be a better solution or at least part of the solution? I really don't yet understand how iCloud works. Hopefully, one of you can help me??
    we have 2 iphone 4's synced to the same itunes account for apps and music since the day we bought them, but each has a different icloud acct. they have both been updated on the same itunes account with every update that has come out since we bought them in december of 2010. nothing on either phone has ever been lost or duplicated. having said all that, maybe i'm missing something here, but we have had no problems. we do have itunes setup to sync manually. i do believe i'm a piker compared to lawrence finch, but i'm just telling you what happens in my house. maybe check with apple? is there a store near you?

  • HCM Process and Forms - Create and End record using the same form scenario

    Hi All,
    I have the following requirement while using HCM Processes and Forms: Using one form/scenario I need to both create a record or be able to end a record for infotype 841. When looking at the back-end service SAP_PA I have operations Create, Change, Change without delimiting and Delete. My requirement would be to do both a create and a delete I guess, but these two can't be selected at the same time while configuring the form scenario.
    I was thinking about doing somethign with the startdate and enddate instead of using the effective date. But I have no clue how to do that.
    How would this be possible?
    Thanks,
    J

    You are correct in assuming that you cannot have a create and delete on the same infotype. The config will not allow it.  Instead, configure the create and then do the delete via a call to you own method in the workflow or via the advanced generic service
    Cheers
    Ian

  • Update Schedule line Delivery date using Bapi_po_Change

    Hi all,
    I am using Bapi_po_change to Update the Schedule line Delivery date(EKET-EINDT) for the PO based on the Item and the Schedule line.
    I am passing the PO number, Po header, Item structure, Schedule line Structure.
    But the Date is not getting updated in the Eket table.
    Please suggest.

    Hi Sukriti,
    Thanks for the Response, yes i have used the Bapi Transaction Commit Also .
    The point is I am able to Update the Statistical Delivery Date in the Same EKET table using BAPI_PO_Change .I have Checked all the Ways to update the EKET-EINDT(Delivery Date)but no Unable to do it.

  • How to Select data using same column name from 3 remote database

    Hi,
    Can anyone help me on how to get data with same column names from 3 remote database and a single alias.
    Ex.
    SELECT *
    a.name, b.status, SUM(b.qty) qantity, MAX(b.date) date_as_of
    FROM
    *((table1@remotedatabase1, table1@remotedatabase2, table1@remotedatabase3)a,*
    *(table1@remotedatabase1, table1@remotedatabase2, table1@remotedatabase3)b)*
    WHERE b.dept = 'finance'
    AND a.position = 'admin'
    AND a.latest = 'Y' AND (b.status <> 'TRM') AND b.qty > 0;
    GROUP BY a.name, b.status ;
    NOTE: the bold statements is just an example of what I want to do but I always gets an error beacause of ambiguous columns.
    Thanks in advnce. :)
    Edited by: user12994685 on Jan 4, 2011 9:42 PM

    user12994685 wrote:
    Can anyone help me on how to get data with same column names from 3 remote database and a single alias.Invalid. This does not make sense and breaks all scope resolution rules. And whether this is in a single database, or uses tables across databases, is irrelevant.
    Each object must be uniquely identified. So you cannot do this:
    select * from (table1@remotedatabase1, table1@remotedatabase2, table1@remotedatabase3) a3 objects cannot share the same alias. Example:
    SQL> select * from (dual, dual) d;
    select * from (dual, dual) d
    ERROR at line 1:
    ORA-00907: missing right parenthesisYou need to combine the objects - using a join or union or similar. So it will need to be done as follows:
    SQL> select * from (select * from dual d1, dual d2) d;
    select * from (select * from dual d1, dual d2) d
    ERROR at line 1:
    ORA-00918: column ambiguously definedHowever, we need to have unique column names in a SQL projection - so the join of the tables need to project a unique set of columns. Thus:
    SQL> select * from (select d1.dummy as dummy1, d2.dummy as dummy2 from dual d1, dual d2) d;
    DUM DUM
    X   X
    SQL> I suggest that you look closely at what scope is and how it applies in the SQL language - and ignore whether the objects referenced are local or remote as it has no impact to fundamentals of scope resolution.

  • How to use same form for Editing info and creating info.

    Hi all,
    Here my aim is to select the user from list and edit the user info. There is one more option to create the new user.
    Currently I am using two separate input forms one for Editing and one more creating new user.
    Can anyone tel me, how to use the same form for both editing and creating.
    Thanks,
    Ramesh Biradar

    Hi Ramesh,
    I'll make some assumptions about how you're going about this, and then give you a possible solution:
    I assume that you have a table with selection on one page. To edit an item, you wish to select it's radio button and click an edit button to take you to another page with the item filled in to edit it. To create a new item, you'd like to click a "new" button and go to the same page.
    If this is correct, here's the basic steps:
    1). Assuming you have both the list and edit pages already created, make sure you have a JSF navigation case defined going from the list page to the edit page. I'll call this navigation case "goToEditPage" for this discussion.
    2). To make the edit button, drag a command button from the component palette and drop it on the af:TableSelectOne (the column in your table containing the radio buttons for selection).
    3). Set the action property on this command button to "goToEditPage".
    4). Now, to make the create button, drag a command button from the component palette somewhere on the page. I like to put mine in a panelButtonBar inside the actions facet of an af:Page component.
    5). Now, for the Action property of this command button, bind it to a method in your page's backing bean. The code will look something like this:
    public String performNew()
        BindingContainer bindings = getBindings();
        OperationBinding operationBinding = bindings.getOperationBinding("Create");
        Object result = operationBinding.execute();
        if (!operationBinding.getErrors().isEmpty())
          return null;
        return "goToEditPage";
    }Hope this is helpful, Ramesh.
    Regards,
    John

  • Issue in Update routine due to Data Package

    We have this peculiar situation.
    The scenario is ..
    We have to load data from ODS1 to ODS2.
    The data package size is 9980 while transferring data from ODS1 to ODS2.
    In the update rule we have some calculations and we rank the records based on these calculations.
    The ODS key for both ODS1 and ODS2 is same ie Delivery Number , Delivery Item & Source System.
    For example a Delivery Number has 12 Delivery Items.
    These Delivery Items are in different Data Packages namely Data Package 1 and Data Package 4.
    So instead of having the ranks as 1 to 10 its calculating it as 1 to 5 and second item as 1 to 5.
    But what we require is Rank as 1 to 10.
    This is due to the fact that the items are in different Data packages.
    In this case the ABAP routine is working fine but the Data Package is the problem.
    Can anybody any alternative solution to this issue.?
    Thanks in advance for assistance.............

    CODE FOR INTER DATA PACKAGE TREATMENT
    PROGRAM UPDATE_ROUTINE.
    $$ begin of global - insert your declaration only below this line  -
    TABLES: ...
    DATA:   ...
    DATA: v_packet_nbr TYPE i VALUE 1.
    DATA:
      g_requnr  TYPE rsrequnr.
    DATA:
      l_is        TYPE string VALUE 'G_S_IS-RECNO',
      l_requnr    TYPE string VALUE 'G_S_MINFO-REQUNR'.
    FIELD-SYMBOLS: <g_f1> TYPE ANY,
                   <g_requnr> TYPE ANY.
    TYPES:
      BEGIN OF global_data_package.
            INCLUDE STRUCTURE /bic/cs8ydbim001.
    TYPES: recno   LIKE sy-tabix,
      END OF global_data_package.
    DATA lt_data_package_collect TYPE STANDARD TABLE OF global_data_package.
    DATA ls_datapack TYPE global_data_package.
    datapackage enhancement Declaration
    TYPES: BEGIN OF datapak.
            INCLUDE STRUCTURE /bic/cs8ydbim001.
    TYPES: END OF datapak.
    DATA: datapak1 TYPE STANDARD TABLE OF datapak,
          wa_datapak1 LIKE LINE OF datapak1.
    Declaration for Business Rules implementation
    TYPES : BEGIN OF ty_ydbsdppx.
            INCLUDE STRUCTURE /bic/aydbsdppx00.
    TYPES: END OF ty_ydbsdppx.
    DATA : it_ydbsdppx TYPE STANDARD TABLE OF ty_ydbsdppx WITH HEADER LINE,
           wa_ydbsdppx TYPE ty_ydbsdppx,
           temp TYPE /bic/aydbim00100-price,
           lv_tabix TYPE sy-tabix.
    $$ end of global - insert your declaration only before this line   -
    The follow definition is new in the BW3.x
    TYPES:
      BEGIN OF DATA_PACKAGE_STRUCTURE.
         INCLUDE STRUCTURE /BIC/CS8YDBIM001.
    TYPES:
         RECNO   LIKE sy-tabix,
      END OF DATA_PACKAGE_STRUCTURE.
    DATA:
      DATA_PACKAGE TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
           WITH HEADER LINE
           WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
    FORM startup
      TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
               MONITOR_RECNO STRUCTURE RSMONITORS " monitoring with record n
               DATA_PACKAGE STRUCTURE DATA_PACKAGE
      USING    RECORD_ALL LIKE SY-TABIX
               SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
      CHANGING ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
    $$ begin of routine - insert your code only below this line        -
    fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
    to make monitor entries
    TABLES: rsmonfact.
      TYPES:
        BEGIN OF ls_rsmonfact,
          dp_nr TYPE rsmonfact-dp_nr,
        END OF ls_rsmonfact.
      DATA: k TYPE i,
            v_lines_1 TYPE i,
            v_lines_2 TYPE i,
            v_packet_max TYPE i.
    declaration of internal tables
      DATA: it_rsmonfact TYPE STANDARD TABLE OF ls_rsmonfact.
    INTER-PACKAGE COLLECTION TREATMENT *******************
      ASSIGN (l_requnr) TO <g_requnr>.
      SELECT dp_nr FROM rsmonfact
        INTO TABLE it_rsmonfact
        WHERE rnr = <g_requnr>.
      DESCRIBE TABLE it_rsmonfact LINES v_packet_max.
      IF v_packet_nbr < v_packet_max.
      APPEND LINES OF DATA_PACKAGE[] TO lt_data_package_collect[].
        CLEAR: DATA_PACKAGE.
        REFRESH DATA_PACKAGE.
        v_packet_nbr = v_packet_nbr + 1.
        CLEAR: MONITOR[], MONITOR.
        MONITOR-msgid = '00'.
        MONITOR-msgty = 'I'.
        MONITOR-msgno = '398'.
        MONITOR-msgv1 = 'All data_packages have been gathered in one. '.
        MONITOR-msgv2 = 'The last DATA_PACKAGE contains all records.'.
        APPEND MONITOR.
      ELSE.
    last data_package => perform Business Rules.
        IF v_packet_max > 1.
          APPEND LINES OF DATA_PACKAGE[] TO lt_data_package_collect[].
          CLEAR: DATA_PACKAGE[], DATA_PACKAGE.
          k = 1.
    We put back all package collected into data_package, handling recno.
          LOOP AT lt_data_package_collect INTO ls_datapack.
            ls_datapack-recno = k.
            APPEND ls_datapack TO DATA_PACKAGE.
            k = k + 1.
          ENDLOOP.
          CLEAR : lt_data_package_collect.
          REFRESH : lt_data_package_collect.
        ENDIF.
    sorting global data package and only keep the first occurence of the
    *record
      SORT DATA_PACKAGE BY material plant calmonth.
      DELETE ADJACENT DUPLICATES FROM DATA_PACKAGE
            COMPARING material plant calyear.
      SELECT * FROM /bic/aydbsdppx00
          INTO TABLE it_ydbsdppx
          FOR ALL ENTRIES IN DATA_PACKAGE
            WHERE material = DATA_PACKAGE-material
              AND plant    = DATA_PACKAGE-plant
              AND calyear  = DATA_PACKAGE-calyear.
    Enhance Data_package with Target additionnal fields.
      LOOP AT DATA_PACKAGE.
        CLEAR : wa_datapak1, wa_ydbsdppx.
        MOVE-CORRESPONDING DATA_PACKAGE TO wa_datapak1.
        READ TABLE it_ydbsdppx INTO wa_ydbsdppx
          WITH KEY material = DATA_PACKAGE-material
                      plant = DATA_PACKAGE-plant
                    calyear = DATA_PACKAGE-calyear.
        IF sy-subrc NE 0.       "new product price
          APPEND wa_datapak1 TO datapak1.
        ELSE.                   " a product price already exists
          IF wa_ydbsdppx-calmonth GE DATA_PACKAGE-calmonth.
    keep the eldest one  (for each year), or overwrite price if same month
            APPEND wa_datapak1 TO datapak1.
          ENDIF.
        ENDIF.
      ENDLOOP.
    ENDIF.
    if abort is not equal zero, the update process will be canceled
      ABORT = 0.
    $$ end of routine - insert your code only before this line         -
    ENDFORM.
    Edited by: mansi dandavate on Jun 17, 2010 12:32 PM

  • Listing Windows Updates by a Specific date using PowerShell

    Create/update trouble tickets for updating servers.  I want to user PowerShell to get a list of the updates for a specific day.  
    I've found some things that were close and came up with this:
    $date = "1/21/2014"
    $Session = New-Object -ComObject "Microsoft.Update.Session"
    $Searcher = $Session.CreateUpdateSearcher()
    $historyCount = $Searcher.GetTotalHistoryCount()
    $Searcher.QueryHistory(0, $historyCount) | Where-Object {$_.Date -gt $date}  | Select-Object Title, Date > updates.txt
    It works *but* the times are in GMT.  
    How do I get them to print correctly?

    The times are in standard datatime.
    To get6 local time use Date.ToLocalTime()
    $Searcher.QueryHistory(0, $historyCount) |
          Where-Object {$_.Date -gt $date}  | 
          Select-Object Title, @{N='Date';E={$_.Date.ToLocalTIme()}}
    ¯\_(ツ)_/¯

  • Issue in updating the Huge XML by using updatexml function

    Hi All,
    Database Credentails:
    Oracle 9i R2.
    I have a huge xml like this,
    <Root>
    <abc></abc>
    <abc></abc>
    <abc></abc>
    </Root>
    The <abc></abc> will be more than 10000 under the <Root> tag.
    I have tried to update this xml by using the following script,
    for i in 1 .. 10000
    loop
    SELECT UPDATEXML(v_xml,'/Root/abc['|| i ||']','<abc>'|| i || '<abc>')
    INTO v_xml;
    dbms_output.put_line(i); -- Just to check how many values were updated
    end loop;
    While executing the above sample code, i am getting the error called
    INVALID XPATH EXPRESSION,
    some times it is executing to some number after that i am getting the above error. when i try execute the same code again i will get error for different i value.
    Could you please help me out to fix this bug/mistake for me. Please provide me some sample code for this.
    Thanks in Advance,
    Vinoth Kumar S.

    You don't need any loop for this. simple UPDATEXML statement should do.
    sql> WITH myxmltab AS
      2  (SELECT XMLTYPE('<Root>
      3  <abc>4</abc>
      4  <abc>5</abc>
      5  <abc> </abc>
      6  <abc> </abc>
      7  <abc> </abc>
      8  <abc></abc>
      9  <abc></abc>
    10  <abc></abc>
    11  <abc></abc>
    12  <abc></abc>
    13  </Root>') xmlcol FROM dual)
    14  select UPDATEXML(t.column_value,'/abc',xmltype('<abc>' || rownum || '</abc>')) from myxmltab,
    15  table(xmlsequence(extract(xmlcol,'/Root/abc'))) t;
    UPDATEXML(T.COLUMN_VALUE,'/ABC',XMLTYPE('<ABC>'||ROWNUM||'</ABC>'))
    <abc>1</abc>
    <abc>2</abc>
    <abc>3</abc>
    <abc>4</abc>
    <abc>5</abc>
    <abc>6</abc>
    <abc>7</abc>
    <abc>8</abc>
    <abc>9</abc>
    <abc>10</abc>
    10 rows selected.
    Elapsed: 00:00:00.04

  • Updating one row of data using CMP

    Hi,
    How should I update a single row mapped with a CMP persitence, should I write a differetnt method for update , pl clarify in detail.

    Hi,
    How should I update a single row mapped with a CMP
    P persitence, should I write a differetnt method for
    update , pl clarify in detail.Hi,
    You can just find that particular Row using the findByPrimaryKey method the entity.
    This method actually returns the Remote Interface for the Entity which contains taht particular row of record.
    Use The setters of the Remote interface to update your existing Row.

  • Issue with select query to fetch data using Join from two tabels

    Hello All-
    I want to fetch the ShowName as "SUN NIGHTLY NEWS" and EpisodeName as "091706"
    based on the condition a.TitleNo=b.TitleNo and a.seriesNo=b.TitleNo.
    If i use the only first condition-a.TitleNo=b.TitleNo than output is displayed as-
    SchedItemNo |      Showname|      EpisodeName
    2702154     |     091706     |     091706
    If i use the second Condition-a.seriesNo=b.TitleNo than Output is displayed as-
    SchedItemNo|     Showname      |     EpisodeName
    2702154     |     SUN NIGHTLY NEWS |     SUN NIGHTLY NEWS
    Than i tried following Query to use the Union based on two conditions:-
    Select distinct a.SchedItemNo,b.TitleName,b.TitleName as EpisodeName
    from ScheduleItem a,Titles b where a.TitleNo=b.TitleNo and
    a.ScheditemNo in ('2702154')
    Union All
    Select distinct a.SchedItemNo,b.TitleName,b.TitleName as EpisodeName
    from ScheduleItem a,Titles b where b.TitleNo=a.SeriesNo and
    a.ScheditemNo in ('2702154')
    than it display the following result-
    SchedItemNo|     Showname |     EpisodeName
    2702154     |     091706          |     091706
    2702154     |     SUN NIGHTLY NEWS |     SUN NIGHTLY NEWS
    Here also values are not what i want :(
    I want the result to be displayed as using SQL:-
    SchedItemNo |     Showname      |     EpisodeName
    2702154     |     SUN NIGHTLY NEWS |     091706
    Please help me out!
    Thanks in Advance for putting your efforts.Looking forward for your replies.

    SQL> create table scheduleitem
      2  as
      3  select 2702154 scheditemno, 1 titleno, 11 seriesno from dual
      4  /
    Tabel is aangemaakt.
    SQL> create table titles
      2  as
      3  select 1 titleno, '071706' titlename from dual union all
      4  select 11, 'SUN NIGHTLY NEWS' from dual
      5  /
    Tabel is aangemaakt.
    SQL> Select distinct a.SchedItemNo,b.TitleName,b.TitleName as EpisodeName
      2  from ScheduleItem a,Titles b where a.TitleNo=b.TitleNo and
      3  a.ScheditemNo in ('2702154')
      4  /
                               SCHEDITEMNO TITLENAME        EPISODENAME
                                   2702154 071706           071706
    1 rij is geselecteerd.
    SQL> Select distinct a.SchedItemNo,b.TitleName,b.TitleName as EpisodeName
      2  from ScheduleItem a,Titles b where b.TitleNo=a.SeriesNo and
      3  a.ScheditemNo in ('2702154')
      4  /
                               SCHEDITEMNO TITLENAME        EPISODENAME
                                   2702154 SUN NIGHTLY NEWS SUN NIGHTLY NEWS
    1 rij is geselecteerd.
    SQL> Select distinct a.SchedItemNo,b.TitleName,b.TitleName as EpisodeName
      2  from ScheduleItem a,Titles b where a.TitleNo=b.TitleNo and
      3  a.ScheditemNo in ('2702154')
      4  Union All
      5  Select distinct a.SchedItemNo,b.TitleName,b.TitleName as EpisodeName
      6  from ScheduleItem a,Titles b where b.TitleNo=a.SeriesNo and
      7  a.ScheditemNo in ('2702154')
      8  /
                               SCHEDITEMNO TITLENAME        EPISODENAME
                                   2702154 071706           071706
                                   2702154 SUN NIGHTLY NEWS SUN NIGHTLY NEWS
    2 rijen zijn geselecteerd.
    SQL> select a.SchedItemNo "SchedItemNo"
      2       , show.TitleName "Showname"
      3       , episode.TitleName "EpisodeName"
      4    from ScheduleItem a
      5       , Titles episode
      6       , Titles show
      7   where a.TitleNo = episode.TitleNo
      8     and a.SeriesNo = show.TitleNo
      9  /
                               SchedItemNo Showname         EpisodeName
                                   2702154 SUN NIGHTLY NEWS 071706
    1 rij is geselecteerd.Regards,
    Rob.

  • Whats the best way to manipulate  data using a Form ??

    I have a few forms and basic navigation and data manipulation I find are rubbish - cos I am rubbish at making it any better.
    I have a customer form (layout style of form) and table, I set up 2 buttons (enter_query & execute_query) to retrieve specific details based on customer ID input by the user. If the specified ID is for the wrong customer I want a button or buttons that will navigate through the IDs one by one until the right customer is found. If it was a tabular form I could do it but can I manage this if the form is not ?
    Once the data is retrieved what is the best way to manipulate and save it ? Can I create a button that has PL/SQL code to UPDATE that particular record or do you guys and girls use the SAVE icon ?
    Finally, I can't work out how to get the right side of the form displayed it seems to miss off an inch or 2. The canvas editor shows the form properly, the window size is just a smidge bigger than the canvas. When the form is run, how can I make the display area for the R/H/S bigger ?
    Thanks in advance.

    Sorry - I had to read up on what a base table block was.
    I think I am. In this particular form I have one block - a customer block which has its items pulled in from the customer table, no problems there, it works fine.
    My problem is I need to make it as user friendly as possible, if the user inputs the wrong customer ID (or does not know their name) I want them to be able to scroll through the customer list using an up or down button.
    When do you have the commit_form statement run, (the OK button) after every change or after a block of changes ? Commit writes the changes to the database giving other users access to that data right ?! How often should it be used ?

  • Update Library of a person using same music files but different login

    I use iTunes with Windows. The songs are saved in "my files". I am using Windows XP Verion 5.1 My wife uses also iTunes on the same computer but with a different login. When I add files to iTunes my library is up to date but not hers. What can I do?
      Windows XP   Verion 5,1

    Have a look at this article on sharing iTunes and see if it does what you are looking for. It was written for iTunes 4 but the version doesn't matter:"iTunes: How to share music between different accounts on a single computer" http://docs.info.apple.com/article.html?artnum=93195

  • How to migrate pricing condition data using lsmw

    Hello All,
                 can any one explain how to migrate pricing condition data using lsmw.
    the scenario is we are trying to extend the pricing conditions from one sales area to other sales area on a combination of sales organization, distribution channel and division.

    Hi Sreedhar Kodali
    Pricing conditions can be extended with the following options:-
    1)  Customer / material with release status
    2)  Sales Org / Dist. Channel / Cust group / Material
    3)  Price List category / Currency / material with release status
    4)  Material with release status
    Assuming that your pricing condition in one sales area is different to another, first you have to create LSMW recording to extend the sales area and then pricing conditions can be uploaded accordingly.
    Thanks
    G. Lakshmipathi

Maybe you are looking for