Issue in using an AT NEW command in SMARTFORM.
Hi.
I am printing a total summary of flight data and then calculating the total price in Smart forms.
I would like to group the fetched data according to it's Carrid and Connid.
I would like to ask for some guidance at this point,
Sr.No Carrid Connid Fldate Price
1. AA 0017 28102007 1000 USD
29102007 2000 USD
2. LH 0402 10102007 1500 EURO
12112007 4500 EURO
3. SQ 0200 14112007 2000 SGD
16122007 4500 SGD
We can solve this by using AT NEW FIELD in normal case.
But, In smart forms I am unable to do that or not finding the appropriate way. Can we use AT NEW in smart form and if yes, where and is there any condition for its applicability.
If no, what is the best suggested way.
I appreciate your inputs.
Good Luck & Regards.
Harsh Dave
Hi,
You can get the functionality of At new by using the Event in loop control in smart froms.
In the Loop , Go to Data tab.Now in the below 'Sort criteria,
give the field name in which you want At new Function.
then Check the Checkbox right.
You will get an Event tree just below the loop tree.
In that Event tree,put the Text you want to display only for new value.
Right clicking on the loop give the text that is displyed multiple times.
In this way you will get the desired output.
Regards,
sujit
Similar Messages
-
HOW TO GIVE AT NEW COMMAND IN SMARTFORMS.NEED THE REPLY URGENTLY.PLEASE HELP.
To determine the sorting of your internal table, use the Data tab of the table or loop node. In the Sort Criteria group box you can enter the fields by which to sort the table.
The sequence in which you enter the field names into the table control determines the sort sequence. Use the radio buttons to choose whether to sort the field in ascending or in descending order.
If you want to display data before or after a sort level, mark Event on Sort Begin and/or Event on Sort End . In the navigation tree, an event node appears for which you can create inferior nodes. In these inferior nodes you specify the data you want to display at this event (for example, subtotals). -
Issues with using the output redirection character with newer NXOS versions?
Has anyone seen any issues with using the output redirection character with newer NXOS versions?
Am receiving "Error 0x40870004 while copying."
Simply copying a file from bootflash to tftp is ok.
This occurs for both 3CDaemon and Tftpd32 softwares.
Have tried it on multiple switches - same issue.
Any known bugs?
thanks!
The following is an example of bad (NXOS4.1.1b) and good (SANOS3.2.1a)
MDS2# sho ver | inc system
system: version 4.1(1b)
system image file is: bootflash:///m9200-s2ek9-mz.4.1.1b.bin
system compile time: 10/7/2008 13:00:00 [10/11/2008 09:52:55]
MDS2# sh int br > tftp://10.73.54.194
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
TFTP put operation failed:Access violation
Error 0x40870004 while copying tftp://10.73.54.194/
MDS2# copy bootflash:cpu_logfile tftp://10.73.54.194
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
|
TFTP put operation was successful
MDS2#
ck-ci9216-001# sho ver | inc system
system: version 3.2(1a)
system image file is: bootflash:/m9200-ek9-mz.3.2.1a.bin
system compile time: 9/25/2007 18:00:00 [10/06/2007 06:46:51]
ck-ci9216-001# sh int br > tftp://10.73.54.194
Trying to connect to tftp server......
|
TFTP put operation was successfulPlease check with new version of TFTPD 32 server. The error may be due to older version of TFPT server, the new version available solved this error. Files are getting uploaded with no issues.
1. Download tftpd32b.zip from:
http://tftpd32.jounin.net/tftpd32_download.html
2. Copy the tftpd32b.zip file into an empty directory and extract it.
3. Copy the file you want to transver into the directory containing tftpd32.exe.
4. Run tftpd32.exe from that directory. The "Base Directory" field should show the path to the directory containing the file you want to transfer.
At this point, the tftpserver is ready to begin serving files. As devices request files, the main tftpd32 window will log the requests.
Best Regards... -
Hi,
Please check the following code
loop at itab1.
loop at itab where id = itab1-id and
werks = itab1-werks.
clear text1.
at new text.
text1 = itab-text.
endat.
write text1.
endloop.
endloop.
say i have text field in itab as
a
b
c for id = itab1-id and
werks = itab1-werks.
for the first text i.e its not going inside the at new command,
its skipping the at new command for text a but for text b it going inside th at new command.
Can anyone tell me what should i do inorder to go to at new command even for the first text.
Thankspreeti,
This is definitely the correct answer. SAP online help says:
<i>You can use control level statements to react to control breaks in internal tables instead of programming them yourself with logical expressions. Within the loop, you must order the AT-ENDAT statement blocks according to the hierarchy of the control levels. If the internal table has the columns <f1>, <f 2>, ...., and if it is sorted by these columns, you must program the loop as follows:
</i>
<i><b>You should not use control level statements in loops where the line selection is restricted by WHERE or FROM and TO. Neither should the table be modified during the loop.
</b>
</i>
Regards,
Clemens
P.S.; Please mark question as answered -
When my most front window is a safari one and I use the shortcut key "Command N", it opens a new finder window and a new safari window at the same time. Why does it happen?
I just found the solution!
Niel
Re: Why is my Finder window popping up when I open my Safari window?
Jan 20, 2008 7:58 PM (in response to alak)
Open the General tab of the Safari preferences and correct the home page; the default page is this one. If it has become set to a folder on an FTP server or a local drive, that request will be sent to the Finder. (28252)
iMac Late 2007 Core 2 Duo, Mac OS X (10.5.1) -
I just got iTunes 11.0. From all the previous versions I'm used to being able to return to the beginning of a song by hitting 'enter'. What's the new command for skipping to the head of a song?
Mmmmmm. Works OK for me. I've tried every variation I can think of. Play from playlist, play from library, shuffle on, shuffle off, single song repeat on/off, playlist repeat on/off.
WAIT !! Now I've found it !! It happens when I have the sidebar hidden and play a playlist from the PLAYLIST pane. Hitting Enter then takes me to the FIRST song in the playlist.
WAIT AGAIN !!! In the time it took to write the above, it changed again and works properly. Well properly is not really true. It works if I stay in the PLAYLIST pane. If I switch to the SONGS, ALBUMS or ARTISTS pane, enter does nothing. BUT, if I switch to the GENRES pane, enter starts the first song there. AND, if I've switched away from the PLAYLIST pane and switch back, enter then starts the first song in the playlist.
WOW !! That was a crazy ride. I think we can safely say that there is something awry. -
when checking mail in google I am not able to 'star' an e-mail or mark it etc. I don't get the option to do that, as I did before upgrading to Mac Osx Lion
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About -
Help using the Connection Trunk command
Hello Group,
I could use a bit of assistance accomplishing the following.
I have two Cisco 1760 Routers with a WIC 1/DSU T1 and one VIC2/E/M in each router. I am new to CLI commands and could use some tips.
I would like to set up these routers (I will call them Router A and Router B) to communicate with each other via a internal IP network which spans between two seperate locations.
I would like to set up these routers to use the E&M ports to send and receive audio between locations. The E&M ports are connected to my external equipment which allows for transmit and receive audio to be delivered to the E&M port.
I need to be able to allow for the routers to use 2 wire or 4 wire audio between locations, which is matched at both ends. The routers do not dial phone numbers nor are phones in use at all. Basically the routers are going to be used to send and receive two way radio voice between the locations which the radios are interfaced to the E&M ports.
Can anyone please help me on configuring these routers to accomplish this and if I need to use the Connection Trunk command I can do so, as this is the only purpose of the routers is to relay audio between locations.
Please Help.
Thanks A bunch!!
RickThank you for taking the time to reply, However I have allready configured the routers to link the LMR sites together. I have been connecting LMR assets utilizing ROIP for many years using non-cisco equipment which is specifically designed for ROIP, I have a large inventory of 1760 routers which were originally used for Telco applications which were replaced by newer equipment. The fact that the routers have become "obsolete" does not mean that they are not usable for my application. How can you make a statement that this is "limited equipment" when the intended use of this equipment for my application has been accomplished without limitations which are specific to my operation.
I posted a request on this forum to obtain some help in the configuration of these devices from people who are familiar with the 1760 router. Your response was the first response which I had received in regards to my request for assistance, I thank you for at least attaching a link to some resources which I can utilize. Utilizing the services of a "reputable consultant" or "UC certified partner" would be acceptable in some circumstances, however utilizing the services which would be provided by such would only pose limitations on our technical skills. I do not want to have to rely on a third party consultants to acheive what is engineered and desgned in house by our staff.
I am not looking to purchase new equipment, nor am I looking for consulting help on this issue as we manage and deploy equipment in house. Enlisting the services of a consultant or certified partner for our Cisco equipment deployments would only add unnecessary costs and time to deploy equipment. Again thank you for the link to the examples.
Respectfully,
Richard Wiglesworth -
Post Author: tadj188#
CA Forum: Formula
Needed: Sum of LineCount Including Groups and Detail Data On Each Page Used To Generate New Page If TotalPageLineCount > 28
Background:
1) Report SQL is created with unions to have detail lines continue on a page, until it reaches page footer or report footer, rather than using subreports. A subreport report is now essentially a group1a, group1b, etc. (containing column headers and other data within the the report with their respective detail lines). I had multiple subreports and each subreport became one union.
Created and tested, already:
1) I have calculated @TotalLineForEachOfTheSameGroup, now I need to sum of the individual same group totals to get the total line count on a page.
Issue:
1) I need this to create break on a certain line before, it dribbles in to a pre-printed area.
Other Ideas Appreciated:
1) Groups/detail lines break inconveniently(dribble) into the pre-printed area, looking for alternatives for above situation.
Thank you.
Tadjexport all image of each page try like this
var myDoc = app.activeDocument;
var myFolder = myDoc.filePath;
var myImage = myDoc.allGraphics;
for (var i=0; myImage.length>i; i++){
app.select(myImage[i]);
var MyImageNmae = myImage[i].itemLink.name;
app.jpegExportPreferences.jpegQuality = JPEGOptionsQuality.high;
app.jpegExportPreferences.exportResolution = 300;
app.selection[0].exportFile(ExportFormat.JPG, File(myFolder+"/"+MyImageNmae+".JPEG"), false);
alert(myImage[i].itemLink.name) -
AT NEW command in ABAP Objects
Hi everyone!
Is there an equivalent of the AT NEW command in abap oo? When I try to use this command inside a BAdi, I get an error message.
Best Regards,
Luís.Hi,
Thank you for your response
Sample code:
LOOP AT c_t_data ASSIGNING variants are no longer supported in the OO context. Use dynamic variants instead.
Regards,
Luís. -
Any issues with using LDAP on LINUX for GRC 5.2 UME?
Our company is converting our LDAP servers from AIX to LINUX. The DNS name used in our UME connection should not change. Are there any issues with using LDAP on LINUX? We are currently on GRC 5.2 SP9 (in the middle of upgrading to SP12).
Also, I have been trying to connect our test UME system to a test LDAP box that has already been converted to LINUX but keep getting a 'connection failed' error when I try to test it.
Do you have to reboot the server to test changing the LDAP connections? I've been trying it by going into UME, pulling up the LDAP tab, hitting the Modify button, entering the new userid and password for test LDAP, and hitting the Test Connection button. I've verified that this userid and password is correct for test LDAP.
Is there a way to get more information about why the connection failed?
Thanks.I've been told by our LDAP Support group that none of the other configuration settings should have to be changed. I should only have to change the id and password to connect to a test version of LDAP instead of our regular connection to the production LDAP.
Can you test a connection for a different userid/password without having to reboot/restart the server? Do I need to change these two settings, save then, reboot/restart, and then do the Test Connection button?
Thanks. -
Issues With Using a 50" Plasma as a Monitor.
Hi there,
I'm using a brand new Mac Mini (just bought less than 3 hours ago) with my 50 inch plasma (th-50pz80u here are the specs: http://reviews.cnet.com/flat-panel-tvs/panasonic-viera-th-50pz80u/4507-6482_7-32 887126.html ) but when I connect it via a mini DVI adapter to DVI-to-HDMI cable to my TV, I get a image that's too big (menu bar and lower dock are missing) with overscan, or too small (I get black bars on the sides, and the top) without overscan.
I would like the output to be 1080p and completely fit my display. Can anybody help me with that?
Thank you.
-JaiThis issue is being discussed at this link:
http://discussions.apple.com/thread.jspa?threadID=1971252&tstart=0 -
Trying to Download a Software Image to Cisco 2800 series router through TFTP Using the tftpdnld ROMmon Command
and I am getting an Error , I cant figure out what I am doing wrong. I have also pasted my display down here can someone help me out, thanks in advance, I am still new to this utility.
My questions are How do you direct this utility to point to the desktop or the TFTP folder
does FE_PORT: Fast Ethernet 0 imply or point to Fa0/0 on my router
My router is suppose to have 10.0.0.3 255.0.0.0
Gateway of 10.0.0.1 255.0.0.0
My TFTP Server 10.0.0.2 255.0.0.0
How do I get the MAC address of the Router or the TFTP Server and which one is required?
my Ethernet port is 100Mb/Sec I cant tell whether it is full duplex or not so How do i set this FE_SPEED_MODE: Auto???
=====================================================================================
rommon 10 >
rommon 10 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
?=0
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
TFTP_FILE=
rommon 11 > TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
rommon 12 > TFTP_CHECKSUM=0
rommon 13 > SET
monitor: command "SET" not found
rommon 14 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
?=0
TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
TFTP_CHECKSUM=0
rommon 15 > tftpdnld
IP_ADDRESS: 10.0.0.3
IP_SUBNET_MASK: 255.0.0.0
DEFAULT_GATEWAY: 10.0.0.1
TFTP_SERVER: 10.0.0.2
TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
TFTP_VERBOSE: Progress
TFTP_RETRY_COUNT: 18
TFTP_TIMEOUT: 7200
TFTP_CHECKSUM: No
TFTP_MACADDR: 30:37:a6:49:35:a8
FE_PORT: Fast Ethernet 0
FE_SPEED_MODE: Auto
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash: will be lost!
Do you wish to continue? y/n: [n]: y
ARP: address resolution for 10.0.0.2 timed out.
ARP failed with failure code 1. TFTP transfer aborted.
TFTP: Operation terminated prematurely.
rommon 16 > " not found
rommon 17 >FE_SPEED_MODE=2
variable name contains illegal (non-printable) characters
rommon
rommon 18 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
TFTP_CHECKSUM=0
?=0
rommon 19 > tftpdnld [ur]
usage: tftpdnld [-hr]
Use this command for disaster recovery only to recover an image via TFTP.
Monitor variables are used to set up parameters for the transfer.
(Syntax: "VARIABLE_NAME=value" and use "set" to show current variables.)
"ctrl-c" or "break" stops the transfer before flash erase begins.
The following variables are REQUIRED to be set for tftpdnld:
IP_ADDRESS: The IP address for this unit
IP_SUBNET_MASK: The subnet mask for this unit
DEFAULT_GATEWAY: The default gateway for this unit
TFTP_SERVER: The IP address of the server to fetch from
TFTP_FILE: The filename to fetch
The following variables are OPTIONAL:
TFTP_VERBOSE: Print setting. 0=quiet, 1=progress(default), 2=verbose
TFTP_RETRY_COUNT: Retry count for ARP and TFTP (default=18)
TFTP_TIMEOUT: Overall timeout of operation in seconds (default=7200)
TFTP_CHECKSUM: Perform checksum test on image, 0=no, 1=yes (default=1)
TFTP_MACADDR: The MAC address for this unit
FE_PORT: 0= (default), 1
FE_SPEED_MODE: 0=10/hdx, 1=10/fdx, 2=100/hdx, 3=100/fdx,
5=Auto (default)
TFTP_DESTINATION: The flash destination device for the file
flash:(default), usbflash0:, usbflash1:
Command line options:
-h: this help screen
-r: do not write flash, load to DRAM only and launch image
rommon 20 > tftpdnld
IP_ADDRESS: 10.0.0.3
IP_SUBNET_MASK: 255.0.0.0
DEFAULT_GATEWAY: 10.0.0.1
TFTP_SERVER: 10.0.0.2
TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
TFTP_VERBOSE: Progress
TFTP_RETRY_COUNT: 18
TFTP_TIMEOUT: 7200
TFTP_CHECKSUM: No
TFTP_MACADDR: 30:37:a6:49:35:a8
FE_PORT: Fast Ethernet 0
FE_SPEED_MODE: Auto
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash: will be lost!
Do you wish to continue? y/n: [n]: y
ARP: address resolution for 10.0.0.2 timed out.
ARP failed with failure code 1. TFTP transfer aborted.
TFTP: Operation terminated prematurely.
rommon 21 >What I notice in the original post is this error
ARP: address resolution for 10.0.0.2 timed out.
which says that the router is looking for the 10.0.0.2 server but not getting response to its arp request. Can the original poster clarify for us how the device that has the image file is connected to the router that has the problem? Also what kind of device is 10.0.0.2? Is it a PC running TFTP server software or is it something else?
HTH
Rick -
Photoshop CS6 keeps crashing. I am using a brand new IMAC, I have 16GB RAM recently updated as it was running slow with 8GB and lots of hardrive space. When it crashes, i lose all my presents and it changes my preferences, it also fails to save or produce a recovered file despite settings asking it to do so every 5 mins now. When i try to report the problem, it says it has found an issue and gives me a link to a solution....but wont let me click on the link.... PLEASE HELP! It's killing my productivity.
If the crash started right after you added RAM, it could be a bad Ram dimm. You can try this - change the amount of RAM in Photoshop to 4G, this should stop Photoshop from using the higher ram. If it doesn't crash, it's probably the ram. Or run a diagnostic app. You don't say when it crashes, what you're doing when it crashes - it there a pattern? Did it ever work on this computer? Did it work on your previous computer? Without a lot of data, it could be related to the new computer... What OS version? Did you recently update it? Have you updated Photoshop to the most recent update?
Do you have any plug-ins loaded? Try restarting Photoshop, and immediately press & hold the shfit key to turn off plug-ins. -
I just got my replacement phone from Warranty. The phone was on for just 2 hours and it crashed. I was told that motorola knows about this "possible" issue. I got a new sim, hard reset, If it can be done I did it. They are now sending me the same phone again. Number 3. I would hope this one doesn't crash but I rather have a different phone so I can enjoy using my account. The phone's most recent error was today. " Unfortunately, the process com.motorola.widget.circlewidget3d" has stopped. At least the error message works and it's polite. I told tech this and they could not answer my question or help me other then "let's do a hard reset" My warranty replacement is coming on Monday. Let's hope this one works. Anyone else havinbg the same problem. it says "such and such as stop working" on all sorts of stuff! Help! I want my iPhone Back!
I just did a google search on this issue. OMG, I got a ton of videos on this or similar issues. Each one says in some way to clear the cache, reset the data, etc. Why in the world would this continue to happen and they not do a fix that resloves this without having to lose or stop what your doing. This is a very long and constant issue it seems with Android phones as there must have been pages and pages of what I now call "Unfortunately" So I am going to pray that Verizon helps me out and gets me away from this issue and helps me go back to iPhone or try the Samsung.
Maybe you are looking for
-
Hi all, My Old Laptop that had my Itunes, has died a death and cannot be saved. How can I save or access all my music and apps now? Can I set up a new Itunes account? Also I am getting an upgrade to Iphone 4 ,can I transfer all my music and apps on t
-
This is weird. I have internet sharing OFF in network prefs but other macs (and a lame pc) can get internet. How is this happening? Both macs are intel, latest OS version. They are not asked to enter the password I set either.
-
I get this error trying to update from Adobe CC Desktop..?
-
Hello, I recently had to reinstall the OS on my Mac Pro. When I go to my website online, it's still there, but when I retrieved the 'domain' file from my time capsule, I found that it says 'iWeb can't open file' whenever I try to open it. So my site'
-
New iPhone 4 pics just up on Apple's site...
http://www.apple.com/iphone/gallery/