Issue on configuring WTC queue Bridge
Hi all,
Currently I'm trying to configure a Queue Bridge from a JMS queue to a Tuxedo Queue and I'm experiencing some problems.
The situation right now is the following:
1- I've sucesfully created the JMS source Queue under the JMS section of my WebLogic.
2- Created the WTC service, connecting to my Tuxedo Domain.
3- Created the redirect from the JMS to the Tuxedo Queue.
4- Created the Queue Bridge.
The issue right now is, even though my JMS queue is working and have some messages in it, the WTC Queue Bridge fails to initialize with the following error:
<Error> <WTC> <BEA-180095> <The tBridge could not initialize the JMS sourceName queue.>
Any idea on why it's not being able to initialize? I've configured my Source Name with the JNDI name of the JMS Queue:
weblogic.jms.Jms2TuxQueue
Thanks in advance,
Brunno Attorre
Hi Todd,
Regarding the OTMQ functionality, we were hoping to be capable of using the tpattach, tpdeatach, tpenqplus, tpdeqplus, etc..This mostly due to the fact that, when using a OTMQ, we need touse the non-active queues, temporary queues and other functionalities that are provided by these methods...
Anyway, I think a solution for this from our side would be to implement a JNI call although, as you`ve stated before, this is not officially suported by the JATMI interface.
If you see any other solution for these functionalities, I`d be very grateful if you could share them with us.
Thanks very much!
Brunno Attorre
Similar Messages
-
Issue in Configuring Oracle WebCenter Content: Records
HI,
I have an issue in Configuring Oracle WebCenter Content: Records
In "Records Management Setup Checklist"
Checked-in Audit Entries Default Metadata
Checked-in Screening Reports Default Metadata
Checked-in Reservation Default Metadata
Am not able to select the category/folder in the default check-in form for the above, and i don't see anything in the drop down also
When i click on the Browse button of above 3..
see Retention Schedule & favorite Schedule
But am not able to select any of those.
AnyOne faced this issue, pls help..
Thanks!!!!The Oracle webcenter content: Records system will enable the retention schedule but it won't create any default retention category. If you want apply retention to a content then first you have to create the retention category and the disposition rule. Once you create the retention category then it will be listed under Retention Schedule. In your case complete the default configuration without applying retention, once you create retention you can apply that to those contents.
Browse Content --> Retention Schedules --> Create Retention Category
HTH..
Regards,
Manoj -
SAML Overview
Security Assertion Markup Language (SAML) is an XML-based standard for exchanging authentication and
authorization data between security domains, that is, between an identity provider (a producer of assertions)
and a service provider (a consumer of assertions). SAML is a product of the OASIS Security Services
Technical Committee.
SAML is relevant to those customers who already have a SAML implementation in use with other systems in
their organization. Therefore, it is recommended you engage your technology team that has a working
knowledge of SAML and provide this document to them for their review.
Key Roles
• Identity Provider (IDP): The system in authority that provides the user information
• Service Provider (SP): The system that trusts the asserting party’s information, and uses the data to
provide an application to the user.
• Subject: The user and their identity that is involved in the transaction.
Note! In our context, Learning Maestro is the SP, the IDP is customer-specific, and the Subject is the user
who is logged in.
Copyright © 2013 SumTotal Systems, LLC. All rights reserved. Duplication prohibited. 2
Typical SAML Components
Source: http://www.oasis-open.org/committees/download.php/27819/sstc-saml-tech-overview-2.0-cd-02.pdf
Copyright © 2013 SumTotal Systems, LLC. All rights reserved. Duplication prohibited. 3
Implementing SAML 2.0
• SumTotal LMS supports only SAML 2.0 Standards.
• We support only IDP-initiated SAML authentication.
• The SAML Response should be signed and base64 Encoded.
• UserName should be passed in NameID element under Assertion\Subject Keys.
• We use the timestamp provided in IssueInstant attribute of SAML Assertion to find the valid period
(+/- 5 min ) for the SAML Response.
• Currently, we do not support signed or encrypted assertions.
• Deep linked URLs can be passed through an additional URL parameter of “OriginalURL.”
IDP Initiated Web SSO
Source: http://www.ijcsi.org/papers/2-41-48.pdf
4
When Learning Maestro is Accessed from a Portal
1. The user logs into the customer portal.
2. The user clicks on a link to the LMS from the customer’s portal.
3. The link points to an IDP page.
4. The IDP pages posts an HTTP Request to Learning Maestro
5. The request is an < ... > message.
Typical Structure of a SAML Response
• Below is the typical SAML Response received by LMS from IDP
• Value of SAMLResponse parameter should be base64 Encoded.
Please double-click to open the below XML file to view how the response looks after decoding:
ExampleSuccessfulAssertion.xml
5
Configuring SAML 2.0
SumTotal Maestro supports SAML 2.0 for the “Identity Provider Initialized SSO” protocol.
To configure your Maestro domain to accept SAML 2.0 Assertions, the following steps must be taken:
1. Confirm that Usernames are in sync
2. Provide an X.509 Certificate to SumTotal Systems (SHA1 Hashed)
SumTotal Systems will configure your environment with the X.509 cert you provide.
3. Point your call to the following URL:
https://gm1.geolearning.com/geonext/<your_domain>/saml.geo
After authenticating to your Identity Provider, the provider will pass a user into Maestro IF:
• The user has a username matching an existing Maestro username
• The x509 certificates match on both sides
If authentication fails, the user will be presented with a failure page.
Assertions
An optional assertion is available to specify the URL a user will be sent if there is an authentication error.
ErrorRedirectURL Assertion
• If ‘ErrorRedirectURL’ is not specified and an authentication error or other security exception
occurs it will redirect the user to the default secerror.geo page as it does today
• If a value (URL) is specified for ‘ErrorRedirectURL’ and there is an authentication error the user
will be redirected to the URL specified
Sample
6
Additional Information
For additional information on SAML, please refer to the following sources:
Wikipedia: Security Assertion Markup Language
OASIS Executive Summary
IJCSI Intermediate Concept
OASIS Technical Overview
FAQs
Question Answer
What .NET library are we using? SumTotal uses “Componentspace” net SAML 2.0 library
Can users still log in via the login page? Yes. The SAML target page is different than the login page.
Can we deep link into the LMS through
the SAML 2.0 authentication workflow?
Can I get rid of the Logout button?
What is the Session timeout setting? Session Hard Life and Idle Life settings can be configured in
What is the unique ID for SAML? The “username” field.
Yes. “Deep Link Target” (target or original URL parameter) is
accepted. If none is provided, then it will default to the default
landing page as configured in Maestro.
Yes, When using SAML, the logout button still exists
intentionally in the navigation but can be disabled in the
“configure Navigation” options.
the security section of the administration interface of Maestro.
What is the failure page if
Authentication fails?
If the authentication fails, by default an intentionally simple error
is presented to the user stating “Authentication Failure”.
For security purposes, no further information regarding the
specifics of the failure are defined to the user.
An optional ErrorRedirectURL assertion can be used.
What URL do we point to? https://gm1.geolearning.com/geonext/<your_domain>/saml.geoHello,
Thanks for posting your question to here. However, this forum is used to discuss and ask questions about .NET Framework Base Classes (BCL) such as Collections, I/O, Regigistry, Globalization, Reflection. For issues regarding configuring SAML, this is beyond
the scope of our support.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Facing issue in configuring soa server in local jdev 11G
Hi All,
I am facing an issue in configuring local soa server in jdev 11G. I was trying to do the practice excercises in the local jdev and while configuring soa server followed following steps :-
1. Configure SOA to install the Integrated OC4J Server
a. In JDeveloper, select Tools -> Preferences, Run, and then select Integrated OC4J Server.
b. Next, select Tools -> Configure SOA…
c. Complete the dialog for your configuration specifying the database location and the SOA schema user name and password
d. Use the Test button to test the database connection and then click on Ok
This will take 8-10 minutes to run and when finished will end with "Build Successful."
In the end I am getting following log file
[echo] ==Starting standalone oc4j. Check server log D:\FMW\JdevInstance\system11.1.1.0.22.47.96\o.j2ee\embedded-oc4j\log\startsoa.log.
[echo] ==Waiting max 420 second(s) for startup of URL http://LAP1-RBAGRI-IN:8988...
[echo]
* Configuring SOA Infrastructure has FAILED. *
* Please check following logs for possible cause: *
* D:\FMW\JdevInstance\system11.1.1.0.22.47.96\o.j2ee\embedded-oc4j\install\tmp\soa-infra-java.log
* D:\FMW\JdevInstance\system11.1.1.0.22.47.96\o.j2ee\embedded-oc4j\log\startsoa.log
[echo] ==Stopping oc4j standalone...
BUILD SUCCESSFUL
Total time: 7 minutes 11 secondsHi Heidi,
Thanks a lot for your response. The solution you provided worked for me. I am able to configure SOA now and the SOAConsole is coming up properly.
One issue I am facing while deploying my application . The application is getting deployed properly but it does not show up in the console if I look at Default server console I can see this error message :-
Incorrect db schema version.
The database schema version "11.1.6" from the database does not match the version "11.1.7" expected by the server.
The database schema for your SOA installation was not properly installed or your installation is using a database schema installed for a prior release.
The database schema currently in place has probably been configured for a previous release; please re-install the database schema and try to start the server again.
Though I have configured the database locally just like mentioned in the training material. Please let me know if you have any thoughts on this.
Regards,
Ranjana -
How to configure JMS queue on OC4J server. Development in JDeveloper 10G
Hi there,
I have to configure a JMS for an Asynchronous process in my Application which will be running in Oracle 10G Application Server. Development Environment is Oracle JDeveloper 10G.
I am facing a problem on how to configure JMS queue.
Steps Followed are:
in the <JDevloperHome>/j2ee/home/config
1. Made the new queue and connection factory's JMS entry in jms.xml.
2. Specifed the queue in oc4j-connectors.xml.
3. played around with application.xml
and tried all combinations, but the message producer always failed to lookup the queue.
Need help on the steps to follow so that the producer can post the message in the queue.
Also please help how to configure the MDB to listen to the queue.
Thanx and Regards
SubhamIf you were dealing with Oracle 10g app server as opposed to standalone, I might be better able to help you.
One thing though, when you are configuring your MDB in the orion-ejb-jar.xml file, do not forget to specify attribute listener-threads, otherwise no matter how many beans you have in your MDB pool, only one bean will be listening to the queue. Many listener-threads equal to max number of beans in pool. -
An unexpected error occurred while configuring the Network Bridge
Windows XP Pro SP2, a new TP61 6460 6WG, all Win updates, all Lenovo updates.
Everything works fine except... when I'm trying to create a network bridge I always get the following: An unexpected error occurred while configuring the Network Bridge.
This is not the situation described in Microsoft's Knowledge Base KB309640 (http://support.microsoft.com/kb/309640/en-us). I have no ICS, no ICF.
Any ideas?I had the same problem and was really frustrated. I was about to pull my hairs out but then i was finally able to solve it. The solution is deleting some files of WMI repository. The complete details can be found on my blog http://cheatppc.blogspot.com/2008/07/unexpected-error-has-occured-while.html
Hope this solves the problem. -
Issue with configuring Hyperion HUB 7.1.2 with SQLSERVER 2005
Hello Experts,
One of my customer has an issue with configuring Hyperion HUB 7.1.2 with SQLSERVER 2005.
"We are trying to configure the SQL server 2005 database with Hyperion hub and we are unable to get the cofiguration completed. We suspect the driver class (hyperion.jdbc.sqlserver.SQLServerDriver) used in the domain.xml (path \Hyperion\HyperionHub\7.2.1\deployments\Tomcat\4.1.30\) is not helping to connect with sql server 2005. We would appreciate if you can provide new driver class which we can included while deploying the app under the web server."
Please suggest. Thanks in advance
Regards,
SonuHi
Please redeploy only the Web Server under shared service. It has to be redeployed once EPMA and others are configured.
Thanks
Rupak
Mantra to Win | WinMantras.com | http://hyperion.winmantras.com -
How to configure Custom Queues in B2B
Hi B2B Gurus,
Could any one tell us how to configure coustom queues in B2B
1. I created a AQ's in B2B database using scripts , could any one tell us how to configure these in B2B. Please elobrate step by step
2.In 10 G , document protocol parametrs we have interchange sender id and receiver ID, Group sender Id and receiver ID, but these parameters i am not able to find in 11G....
Regards
charlsFrancis wrote:
Outbound:
We need to configure all outbound queues in ( host tp---> channels--->..have to select INTERNAM. OR Administration--->Listening channels--->Have to select INTERNAL)-- Please let me know where i have to configure outbound
Outbound:_ This the channel where you want the B2B to pick up messages and send to remote TP.
This has to be configured via AdminServer -> Listening Channels -> Configure your Listening channel and tick "Internal" to true.
Inbound:
In the same way where we have to configure the INbound queues(TP1_IN_Queue,TP2_IN_QUEUE, TP3_IN_QUEUE, TP4_IN_QUEUE).
Inbound:_ From what I understand, after processing messages received from Remote TP, you want B2B to pass messages to this channel.
To do that-
1.you need to configure the channel in Partners->Host->Channels-> Configure the channels here and ensure that the *"Internal"* property is set to true under the channel attributes.
2. In the inbound agreement, use the channel by using the drop down box under the Host found in bottom left corner.
Thanks,
Varun -
Issues when configure LDAP server in OBIEE
Hi,
I have a big issue, I configure LDAP server for authentication of users, and everything looks fine, but my problem is when I log in Interactive Dashbaords, I enter without any problem, but some parameters and some filters and some functions are NOT working, for example:
-In a parameter I have this condition for Default value: SELECT YEAR(Tiempo.Dia) FROM Finanzas WHERE Tiempo.dia = CURRENT_DATE, and returns me a null value, but if I change to this SELECT YEAR(Tiempo.Dia) FROM Finanzas WHERE Tiempo.dia = CURRENT_DATE-1, returns me "2010"
I have similar behaviors in other parameters, and some filters and some functions.
Everything happen in Development instance. I configure LDAP server in Development instance.
In Production instance nothing of this is happen, but I do not configure LDAP server yet.
What do anyone think is happen here? This happens because I configure LDAP server? What do you think that mades this behavior for my parameters, filters and functions?
Do you think is a better practice to clone Production instance to Development instance? If so, how can I do a clone instance, only for OBIEE?
Regards,
Arnulfo
Edited by: ArnulfoPA on 25-may-2010 15:35The date returned by CURRENT_DATE is determined by the system in which the Oracle BI Server is running. So, does CURRENT_DATE returns an equal values on prom and dev instances in your case?
-
Configuration for Queue Prioritization for EOIO Queues
Hi,
Please can anybody help me in configuring the queue prioritization for EOIO Queues.
Regards
Srinivashi,
Check these help..
Eo/EOIO?BE - Queue - ? - /people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
Please go through these links
/people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
For queues in message mapping
/people/venkat.donela/blog/2005/06/09/introduction-to-queues-in-message-mapping
Here are the Queues for Asynchronous Message Processing
http://help.sap.com/saphelp_nw2004s/helpdata/en/7b/94553b4d53273de10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f078394a-4469-2910-c4bf-853c75674694
Thanks,
Vijaya. -
hi,
i have the following( toupper( remote call from weblogic)
tolower( remote call from tuxedo)
my win machine name is bea01..
Tuxedo8.0
appdir:c:\bea\tuxedo8.1\simpapp
dom1config:*DM_RESOURCES
VERSION=U22
*DM_LOCAL_DOMAINS
TDOM1 GWGRP=GROUP2
TYPE=TDOMAIN
DOMAINID="TDOM1"
BLOCKTIME=20
MAXDATALEN=56
MAXRDOM=89
DMTLOGDEV="c:\bea\tuxedo8.1\simpapp\tlog"
DMTLOGNAME="DMTLOG_TUXDOM"
*DM_REMOTE_DOMAINS
TDOM2 TYPE=TDOMAIN
DOMAINID="TDOM2"
*DM_TDOMAIN
TDOM1 NWADDR="//bea01:1234"
TDOM2 NWADDR="//bea01:2234"
*DM_REMOTE_SERVICES
TOLOWER RDOM="TDOM2"
** started tux(tmboot -y) and see all the services running
netstat -a results in the following:
i see
tcp bea01:1234 listening
**but cannot see 2234 entry
Weblogic8.1sp3
"**start Examples server...through console,
configured WTC as follows:
myLocalAp as
Access point id:TDOM2
network address: //bea01:2234
myremoteAp as
Access point id:TDOM1
local point:mylocalAp
network address: //bea01:1234
*"*tried various combinations of TDOM and accesspoint..
when i target my wtc service to examplesServer, i get:
Distributed Management [1 exceptions] startWTC failure: [WTC:180012]The LocalTDomain myLocalAp is not known.
hence cannot run samples/examples/wtc/simpapp..
therefore i get the following TuxedoConnection not found
entry when i do:
ant run.simpapp..
any help is appreciated...
thanks,,,i am using 8.1sp3 and
examples/wtc/simpapp application in wtc. quick configuration demo
dom1config is
TDOM1 NWADDR="//bea01:1234"
TDOM2 NWADDR="//bea01:2234"
( the following 2 lines r missing from WTC quick config guide)
*DM_LOCAL_SERVICES
TOUPPER LDOM="TDOM1"
*DM_REMOTE_SERVICES
TOLOWER RDOM="TDOM2"
in weblogic
LocalAp is
TDom2
//bea01:2234
RemoteAp is
TDom1
//bea01:1234
when i target Wtc-service to server..
using 8.1sp3 and tuxedo8.1
The LocalTDomain LocalAp is not known err....
ok, i configure
LocalAp is
TDom2
//xx.xx.xx.xx:2234
still doesnot work....
restart weblogic...
same error.. -
Issue while configuring XLIFF as resource bundle
We are using Jdeveloper 11.1.1.7.0 ver. We are configuring ADF Faces project for XLIFF by creating xliff file in resources folder and adding xliff file to project properties.
In design time we are able to see the configured values when we use expression builder however, we are getting following exception at runtime:
java.util.MissingResourceException: Can't find bundle for base name UIRes, locale en
at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:1521)
at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:1260)I am getting issue while configuring report in integrated mode! The issue and the solution to that is as mentioned here.
I tried to set the Report Server Service account to Use Another Account
but when i try to apply i get the issue as below.
Microsoft.ReportingServices.WmiProvider.WMIProviderException: An unknown error has occurred in the WMI Provider. Error Code 800708AC
---> System.Runtime.InteropServices.COMException (0x800708AC): The group name could not be found. (Exception from HRESULT: 0x800708AC)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.ThrowOnError(ManagementBaseObject mo)
at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.SetWindowsServiceIdentity(String accountName, String password, Boolean useBuiltinAccount)
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetWindowsServiceIdentity(String accountName, String password, Boolean useBuiltinAccount)
Kindly help!
I have the same error after a change in domain policies and after reconfigure the password of the domain account user used for the Report Server Service Account.
I don't use a group!!!
Thank You for any help!
Alessio -
Issue in Configuring Linksys RV042 router
Hi,
I am facing some issues in configuring the Linksys RV042 router with dual WAN configuration. We are having two internet connection and I want to perform the "Load balancing" between the two internet connections. I have followed the RV042 manual and configured the router.
But while using the Linksys RV042 for load balancing the "Outlook 2007" and "MSN" are frequently disconnecting in the client machines. We could not use the Linksys RV042 router because of this issue.
We are using the "Static IP" for the two internet connection and configured with manual. We are facing issue only in "Outlook" and "MSN" but I can browse the sites without any issues.
Is there any configurtaions needed? Please help us to get the solution in this issue.
If you need any more details please mail me @ [email protected]
Thanks in Advance,
R. Manikandan.R. Manikandan,
Without knowing more about your configuration, and the reason for "Outlook" and "MSN" disconnecting. I would suggest that you look at the following documentation for setting up "Dual WAN" on the RV042.
http://www.cisco.com/en/US/products/ps9923/products_qanda_item09186a0080a36632.shtml
It sounds like you may need to setup "Protocol Bindings" for your SMTP traffic to be directed out a specific WAN port.
If you continue to have issues, please let us know.
Darren -
Hi Experts,
We are facing an issue while configuring Xampp. We have successfully installed Xampp but while selecting Admin Tab we are getting below error. We have release ports(25) and made the Windows Firewall OFF, still the issue exists. Can you please suggest us how to move forward...
Thanks in Advance..
Regards,
Krishna.MI am getting issue while configuring report in integrated mode! The issue and the solution to that is as mentioned here.
I tried to set the Report Server Service account to Use Another Account
but when i try to apply i get the issue as below.
Microsoft.ReportingServices.WmiProvider.WMIProviderException: An unknown error has occurred in the WMI Provider. Error Code 800708AC
---> System.Runtime.InteropServices.COMException (0x800708AC): The group name could not be found. (Exception from HRESULT: 0x800708AC)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.ThrowOnError(ManagementBaseObject mo)
at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.SetWindowsServiceIdentity(String accountName, String password, Boolean useBuiltinAccount)
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetWindowsServiceIdentity(String accountName, String password, Boolean useBuiltinAccount)
Kindly help!
I have the same error after a change in domain policies and after reconfigure the password of the domain account user used for the Report Server Service Account.
I don't use a group!!!
Thank You for any help!
Alessio -
Having issues while configuring JDI/ on my NWDS.
Having issues while configuring JDI on my NWDS.
I am logged on to Client's domain. Is there some setting thats required to be done in the hosts/service file which would ensure the same.
Please advise.Hi,
Can you specify what issues you are facing ?
Thanks & Regards,
Meenakshi.
Maybe you are looking for
-
How to get rid of miniscule text in menus, etc.
Today I had need to experiment with different text magnfication settings using Control Panel | Display | "Make it easier to read what's on your screen". I normally use the default "Smaller - 100%" setting but I tried both the "Medium - 125%" and "La
-
Sudden green cast on PS7 under XPsp3
Despite not colour profiling my monitor (I am not a pro user), I have never had any colour hassles with PS7. Until now. Suddenly everything I look at via PS7 has a green cast. First noticed it on my summer holiday pix, went aaaghh!, am now troubl
-
Messages Text Invitation Alert does not seem to work with AIM account
Back in the days of iChat - I had a Text Invitation Alert setup to play a sound and repeat that sound. This way if I was away from my computer, it would keep making noise until I accepted/declined the IM. Now I upgraded to Mountain Lion and am using
-
Error when run the eclipse first time
show this message: 未正确配置 ABAP 通信层. 这可能是缺少 Microsoft Runtime DLLs VS2010 所造成的. 请查询安装指南或下载页面以了解有关如何安装此组件的更多详细信息. Native library sapjco3 is too old. Found library C:\Windows\System32\sapjco3.dll has version "720.612", but required is at least version "7
-
Webapp: ejb jars on servlet classpath
I have created a WebApplication (using WebLogic 5.1 sp8) that uses the directory structure documented in http://www.weblogic.com/docs51/classdocs/webappguide.html#dirstruct (with a web-inf/classes for servlet classes and