Issue Processing Account Dimension When Number of Levels Decreases

Hello.
We have an issue processing the account dimension. It started at 8 levels, then decreased to 6 levels. However, the processing errors out. If we add some dummy members to bring it back to 8 levels, then it process fine.
Any ideas?
Thanks, Nancy

Hi Nancy,
the numbers of levels is not important.
I think the changes done into your dimensions are wrong and adding dummy members is doing correction of that error.
To be able to understand the issue I need to know what version of BPC are you using and it will be good to see also the dimension.
Do you have more than one hierarchy?
Regards
Sorin Radulescu

Similar Messages

  • Error  Processing "Account" Dimension in BPC 7.5

    Good Afternoon,
    I am having difficulties processing the account dimension from the Admin function.  I can not save to server or process dimension.  I get the following log error message. This is impeding my ability to add or change account information.  I recently was on maternity leave for 3 months and I am not sure if it is a combination of inactivity coupled with a new PC?  I have recently been provided with  a new laptop, which I am unsure is configured properly.
    #2.0 #2014 06 16 16:33:25:890#-4:00#ERROR#AdminConsole##EPM-BPC-MS##93e2c386-f594-4157-8c44-c6a3d727f3b7###FormMain::SetExeAction#CORP\\jfesterman########Plain##[LOG ID:18]System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.VisualBasic.CompilerServices.Symbols.Container.InvokeMethod(Method TargetProcedure, Object[ Arguments, Boolean[] CopyBack, BindingFlags Flags)
       at Microsoft.VisualBasic.CompilerServices.NewLateBinding.CallMethod(Container BaseReference, String MethodName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack, BindingFlags InvocationFlags, Boolean ReportErrors, ResolutionFailure& Failure)
       at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateCall(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack, Boolean IgnoreReturn)
       at OSoft.Consumers.Admin.AdminMain50.FormMain.SetExeAction(String strCodeID, ArrayList arrReturn)#
    We are running BPC 7.5 on a SQL 2008 server, and  I wanted to check with the blog before Uninstalling and reinstalling the BPC osoft 7.5 application.
    Previously, on my old laptop, I had this capability, and I can run and process all the other dimensions in our list via the Admin feature.  I have also tried to  refresh dimensions via the BPC EMP add in, and that seems to not throw any error logs, so I am unsure as to what my next step should be.
    Plesae advise if I need additional updates to this new computer or if anyone else has seen this error message.
    Thank You,
    Jennifer

    Hi Jennifer,
    if you're unsure that your PC isn't well configured please verify this with the 1678822 - Third Party Software Support Matrix For BPC for Microsoft 7.X, 10.X
    Then run client and server diagnostic to see if there are problems.
    If all ok the dimension file could be corrupted so please change the name of your xls dim file and try to export your dimension, process it and see if ok, if not check the property in the xls dimension file with the modify dimension property in admin console.
    Verify also if this note could be helpful 1905831 - SAP Disclosure Management - Uninstalling DM client removes necessary VBE6EXT.OLB file
    Regards
         Roberto

  • Account Hierarchy / Max number of levels

    Hello to the community,
    I would like to know what is the max number of levels in an account hierachy ?
    Thanks for your help.

    Hello,
    you can use up to 30 levels in the hierarchy.
    That's really enough, your accountants have already lost the overview after 10 levels:-)
    Ciao,
    David

  • Account Dimension not showing all members in the cube in Analysis Services

    Hi,        
             In SAP - BPC 5.1 after processing account dimension all the members are created under account dimension in analysis services but the same cannot be found in the data cube. Hence the reports generated through SAP - BPC is not showing all the members.
             The issue looks very strange as we can see the members getting created but the same is not getting populated in the cubes. I am not able to visualize what exacly the issue is? Is it with the application or with the analysis services?
    Thanks
    Sharath

    Your sixth sense is correct, there is definitely support in MSAS and BPC 5.1 for multiple hierarchies in the account dimension.
    I'm also referring to parentH1 and parentH2, but perhaps we're still speaking of different things.
    In the past, I faced a very similar problem as you, and the root cause was because I had one member, let's call it FancyParent, which, in H1, had children Child1 and Child2.
    But in H2 it had children Child1, Child2 and Child3. I forget now if that was how I wanted the setup to be, or if it was a mistake on my part, but either way, MSAS doesn't allow this. The admin consol didn't complain when processing the dimension -- this was in Outlooksoft 5.0; perhaps validation has improved now.
    But the cube was completely unworkable. Certain things were calculating correctly, but everything in the account dimension in the area around FancyParent (above and below it, in both hierarchies) was quite unpredictable.
    By disabling first one, and then the other, of the two hierarchies, and disabling blocks of accounts, I was eventually able to pinpoint the problem. But it took days to figure out what was the problem. (The account dimension had 2500 members and 4 hierarchies, and it was not a pretty sight.)
    A parent must have the same definition of children in all hierarchies. It can't, as another example, have children in H1, and be a base member in H2. Each member can have different parents in the two hierarchies, but must always have the same children in both.
    To work around this problem, I had to create two separate accounts NetIncomeH1 and NetIncomeH2 (and PretaxIncomeH1, PretaxIncomH2, etc. all the way down to the point where they branched off), to get the two separate aggregations of the P&L in the two hierarchies. Once I did that, it made sense to me why, but I also swore off on frivolous extra hierarchies ever again.

  • Hyperion Planning- Account dimension - Sort Order Issue with ODI 11.1.1.5

    Hello Experts,
    First of all, I thank you everybody in this forum for posting their valuable suggestions.
    I am facing a strange issue with ODI (Version 11.1.1.5) while loading metadata to Planning ACCOUNT dimension (Version 11.1.2.x). I am using a Oracle view to load metadata to this dimension. I have defined the sort order in the view and enabled SORT_ORDER_BY_INPUT. For the fresh load to the dimension, everything is working fine. But, when I move a member from one parent to another parent, and define it as the top member of new parent, it is missing its sort order.
    But it is working fine if you define it as the second, third...or last member under new parent. I have tried all the possible ways by flipping all the properties but unable to fix it.
    Please help me here to resolve this issue.
    Your help is greatly appreciated!!
    Thanks
    Edited by: user11965311 on Sep 20, 2011 7:07 PM

    To be honest I think you are best logging it with Oracle because it sounds like you are doing everything correctly so it could be a bug.
    Have you tested this on any previous versions of ODI or is it a new installation?
    If it does get logged with Oracle please keep me informed of the outcome as I would be interested to hear.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Prompt when processing a dimension

    Hi,
    When i am processing the account dimension i am getting a prompt Stating the the file name already exists in the location do i want to replace it.
    This only comes up on one machine is there a way to stop this prompt from coming up.
    Many thanks

    Hi
    We also have this problem.
    We have a TS setup and i have narrowed it down to the fact that if more than one user is processing or using the Dimension file in their user sessions the error comes up.
    Hope this helps.

  • I am trying to setup iCloud account and when I login I see a popup. The Maximum number of free accounts have been activated on this iPhone. Pls, help me fix it. What other accounts? Thanks

    I am trying to setup iCloud account and when I login I see a popup. The Maximum number of free accounts have been activated on this iPhone. Pls, help me fix it. What other accounts? Thanks

    Then you'll have to use another iOS device or Mac running OS X Lion or higher to create a new account for you to use on your phone.  If you don't have one, perhaps a friend would allow you to create and account on their device (note: this will use one of their three maximum accounts).  To do this, they would need to go to Settings>iCloud, tap Delete Account (which will delete the account from their device but not from iCloud), then allow you to sign back in with your ID to create the new account.  Then tap Delete Account to delete the new account from their device, and finally, sign back in with their iCloud ID to restore their iCloud account to their device.  Then you can sign in with your ID on your phone in Settings>iCloud and use the new account.

  • Hi ! i have this new itunes account but when i wanna use this for apps he ask me for a card number but i don't have one .what i supposed to do ?

    Hi ! i have this new itunes account but when i wanna use this for apps he ask me for a card number but i don't have one .what i supposed to do ?

    Hi Mada7ina,
    If you are looking to set up an iTunes Store account without an associated credit card, you may find the following article helpful:
    Apple Support: Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
    http://support.apple.com/kb/ht2534
    Regards,
    - Brenden

  • How can I create accurate decimal dimensions when creating a new document or using the art board in Illustrator CS6? When I type in a number with a decimal, it automatically rounds the number up.

    How can I create accurate decimal dimensions when creating a new document or using the art board in Illustrator CS6? When I type in a number with a decimal, it automatically rounds the number up.

    For my part you are welcome, sdowers.
    Unfortunately, the uncertainty arising from the rounding has been up several times here in this forum.
    I just came to remember a warning that needs to be given:
    The rounding of the representation of a numerical value may be harmless in itself, but if you use it for any operation that changes the value, such as multiplication or whatever, things will go wrong because the operation will be made on the basis of the rounded value instead of the true value. So, as in your first case in post #2, 39.625 rounded to 39.63 will become 79.26 instead of 79.25.

  • In service order Issu:No account assignment found for this service process

    Issue:No account assignment found for this service process
    An error has occurred in the system RT1400LS while copying the document
    Message no. CRM_ORDER_MISC 020
    Diagnosis
    Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
    Transmission log
    No account assignment found for this service process (Notification E CRM_SRV_LOG_EXT_OLTP 008)
    While we created the service order as a fallow up document of the quotation system unable to create the PR. System showing the above error in the service order.
    We created the service order with same items directly not as fallow up document to quotation PR created with out any fail.
    As per my analyses above error because system unable to find out the Internal order to create the PR hence we created service order as a fallow up document of the service quotation.
    Revert require data to understand the issue more.
    Best Regards,
    Prakesh

     Dear Gurus,
    Thanks for your update. we checked as per your suggestion but the issue is PR is not determining the IO while creating the PR.
    We used the different item cat in quotation and service order system generating the PR, But our Clint want to use the same item cat in the both service order and quotation.
    If we created the quotation after that service order with the service line item and spare part line item system creating the IO (internal order) but PR not generating.
    Please help me in this scenario what should we do.
    Best Regards,
    Prakesh.

  • My Order Number 2510885387 and i have ordered for developer account but when i am checking the status it is still saying no order done in last 30 days

    my Order Number 2510885387 and i have ordered for developer account but when i am checking the status it is still saying no order done in last 30 days

    There's a Contact Us button at the bottom of this article    >  https://developer.apple.com/support/ios/purchase-and-activation.php

  • How to choose the right foreign key to be used when processing a dimension

    Hi,
    here is the problem I'm facing : I need to create a dimension in my cube from the table dimDocumentVente.
    Here are the relations between my tables in SQLServer.
    dimDocumentVente
        ID
        ID Article
        ID GroupeComptaProduitTVA
    dimArticle
       ID
       ID GroupeComptaProduitTVA
    dimGroupeComptaProduit
       ID
       Code
    with Foreign keys between :
    - IDGroupeComptaProduit  in dimDocumentVente and ID in dimGroupeComptaProduit
    - IDGroupeComptaProduit in dimArticle and ID in dimGroupeComptaProduit
    - IDArticle in dimDocumentVente and ID in dimArticle
    In this dimension (based on dimDocumentVente), I add the information ID from dimGroupeComptaProduit.
    When I process the dimension, I see in SQL Profiler that the relation between the 2 tables is done using dimArticle, which is not what I want to do. I want to use the relation which is between dimGroupeComptaProduit and dimDocumentVente.
    Is there a way to tell SSAS, that I want to use the foreign key between dimDocumentVente and dimGroupeComptaProduit to calculate this attribute ?
    From the user point of view, the information contained in the table dimGroupeComptaProduit contains information linked the the VAT rate. This information is linked to the items in our ERP (Dynamics NAV), and when we create a new order, this information is
    copied in the order line and the user has the possibility to override it. So in the cube, it's interesting to both analyse from the value stored in the item and the value stored in the order. That's the reason why !
    Thanks in advance for your help.

    Thanks for your answer but unfortunately, that's not exactly what I'm looking for.
    I mean, I want to create a dimension based on table dimDocumentVente in which I want to include the information "code" coming from dimGroupeComptaProduitTVA table.
    Please see below.
    As you may notice, I have several foreign keys.
    When I process the dimension, I see in SQL profiler that SQLServer is using the relation between dimDocumentVente and dimArticle plus between dimArticle and dimGroupeComptaProduitTVA to process my dimension. It's necessary for me that instead, it uses directly the
    relation between dimDocumentVente and dimGroupeComptaProduitTVA. Is there a way to change this  ?
    Thanks.

  • SmartView 11.1.2 error when having Accounts dimension in POV

    Hi all,
    I'm currently facing a strange problem, when using SmartView 11.1.2 with a HFM application. I have the same application with the same metadata once on a 9.3.3 server and once on a 11.1.2 server.
    When I connect to 9.3.3 select a grid and put the accounts dimension into POV everything works fine.
    When I do exactly the same on 11.1.2 i get the error: XML Load error: A semi colon character was expected
    Does anyone have an idea, what could be the cause of this problem and/or how to fix this?
    Thanks in advance,
    Markus

    Hi,
    thanks for your answers. From all I could find out from Oracle support, I'll have to wait until 11.1.2.1 is GA and then try again :-(
    Or will there be a patch for 11.1.2.0 as well?
    Best regards,
    Markus

  • My husband and I both have iPhones on the same account. When he did his update yesterday, he chose both his number and my number during set up. Now he is getting my messages, too. Can someone please help me fix this?

    My husband and I both have iPhones on the same account. When he did his update yesterday, he chose both his number and my number during set up. Now he is getting my messages, too. Can someone please help me fix this?

    What do you mean he chose his and your number during setup. Chose them for what? Is you number showing up in the Settings>Messages>"You can be reached by imessage at" section? If it is he needs to remove it.
    Cheers,
    GB

  • What to do when subsciption is unable to process after entering serial number and adobe ID

    What to do when subsciption is unable to process after entering serial number and adobe ID

    Get in touch with support by phone/ chat/ web form.
    Mylenium

Maybe you are looking for