Issue related to instalation of EM on another interface
Hello world!
I have a complicated issue (for me).
Today I started to deploy/install Enterprise Manager on my machine.
I have Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit installed on RedHat Linux.
The database is running on a Veritas cluster, so each of the machines (active/passive) has a network interface for it's own and one is the bond interface on which is listening Oracle.
So I proceed to the installation using:
emca -config dbcontrol db -repos recreate
I provided all the answers and the result is:
WARNING: ORA-12541: TNS:no listener
Nov 4, 2013 1:51:08 PM oracle.sysman.emcp.EMConfig perform
SEVERE:
Database connection through listener failed. Fix the error and run EM Configuration Assistant again.
I think the problem is from those two interfaces. Is there a way to specify the interface where you want to install EM?
Thank you in advance.
Regards.
Hi Team,
Ensure you follow all steps to configure your DBcontrol as per below metalink doc
Configure DB Control 10.2, 11g for use in Active/Passive High Availability Environments (Doc ID 362524.1)
Regarding listener error I think the issue is because of the machine has multiple NICS/IP addresses and the hostname used by EMCA does not match the hostname used by the listener or the etc/hosts file is not correct
If the Listener is up on virtual host. Set environment variable ORACLE_HOSTNAME=<virtual host>
Also refer to below metalink doc to help resolve the issue
Troubleshooting EMCA Failures Due to Database Connectivity Issues (Doc ID 1106623.1)
Also check the <ORACLE_HOME>/cfgtoollogs/emca/* for detailed error message
Regards,
Rahul
Similar Messages
-
Trying to download the iOS 8.2 software update on my iPhone 6, but it won't update. All app updates have resolved since the iTunes issue was resolved. Is the software update issue related to this as well, or is it another problem entirely?
I've synced it to iTunes, turned it off/on, etc., but still not downloading.
Any help is appreciated.
Thanks.Hi DebC64,
So is the iOS 8.2 update not downloading to your iPhone, computer or both?
You have synced it to iTunes, that is an option to update if it's not updating wirelessly. Please see if other steps help.
Resolve iOS update and restore errors in iTunes - Apple Support
Regards,
Nubz -
Hello
I don't know who to complain to as you do not appear to have a complaints department, despite searching the web, I trust you can pass this to relevant department for action, as I'm very angry over my recent repair.
Following my issue relating to a blank screen 2 weeks ago, your advisor arranged for my iMac to collected by Amsys, for repair and return, this was done and it was returned to me last Tuesday, onWednesday I set up my iMac again and instantly realised I had problems, much worse than before. I called Amsys to inform them of the issue of the computer being very very slow and unable to open iPhoto and pages, and document listing would not show up, plus I had no sound on the mac.They informed me that they had only replaced the video card and what they had done would have not affected the computers performance. He suggested I reinstall OSX again which I did, but this made no difference to the programs, so I called you.
Your technician on the phone was very good as they have always been, and made an appointment for me to go into the Milton Keynes Apple store the next day at 1 pm, which I did.
The gentleman on the Genius Bar was very good and was able to run tests on the iMac in my presence, and diagnosed immediately an issue with the sound problem, and advised me that this could not be fixed while I wait and I would need to leave it for repair. I made him aware of the previous repair, and he was able to see via your system, the list of logged issues I have had with this since purchasing in September 2012. I'm sure you can see from the way you record all calls and issues the problems I have had.
Today I called to ask if my iMac would soon be ready for collection, I was told the repairs had been completed and it was being tested. However to my dismay, I learned of another serious issue relating to the repair carried out by Amsys. I was informed that 6 screws were missing from the the iMac internally, which caused me much distress and concern, they also told me I had to wait even longer as the screws had to be ordered and installed on arrival before I could collect it.
My issues here are: I trusted the Amsys repairer as it was arranged and recommend by you, it is very evident they are not competent to repair, as they have caused more problems with my iMac on its return, despite enclosing a checklist, fully ticked showing everything working well, it clearly wasn't ! Plus the issue of missing parts (screws) during the repair, I have already expressed my disgust with Amsys, by email and had a response, within the hour, apologising and told me they were looking into this.
This where I stand on this, I have not had my iMac for almost two weeks and I do not know when I will get it back. I'm also very worried about what other damage has been caused by Amsys and the quality of my iMac now. I want to know what you, Apple is going to do about this ? I have already been very inconvenienced by this and until now I have been a very loyal apple customer with 2 iPads, and 4 iPhones in our household, not to mention the iMac.
I feel I have been very let down by this experience, on my iMac, which cost a lot of money, I have also lost a lot of money with lost work and unable to carry out my business without it, and I will be seeking compensation.
I trust you will take this complaint seriously and pass it to the relevant department for action.
Yours sincerely
Des Withey
Sent from my iPad
On 26 Feb 2014, at 11:44, Apple Support <[email protected]> wrote:
Thanks for contacting us.
Thanks for contacting Apple Support. If you need more help later, you can open the case below or start a new support request online.
Case ID:
Open this case
Sincerely,
Apple Support
Get help online
Visit Apple Support to learn more about your product, download software updates, and much more.
Join the conversation
Find and share solutions with Apple users around the world.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM, Cupertino, CA 95014.
All Rights Reserved / Privacy Policy / Apple Support / Give us feedback
On behalf of Apple Distribution InternationalCall Apple Customer Relations - 1-800-275-2273. Ask politely & firmly that you want to be transferred to Customer Relations. Tell them exactly what you stated in your post.
GOOD LUCK!
These are user-to-user forums where everyday folk (volunteers) post questions and offer answers (technical support) to each other. -
Apple Mail with OSX 10.9.5 quits on launch when mail window opens. May be related to install of Security update 2014-005. Any suggestions on fixing this?
Here is the beginning of the Problem details error message:
Process:
Mail [763]
Path:
/Applications/Mail.app/Contents/MacOS/Mail
Identifier:
com.apple.mail
Version:
7.3 (1878.6)
Build Info:
Mail-1878006000000000~1
Code Type:
X86-64 (Native)
Parent Process: launchd [264]
Responsible:
Mail [763]
User ID:
501
Date/Time:
2014-10-20 15:23:32.902 -0800
OS Version:
Mac OS X 10.9.5 (13F34)
Report Version: 11
Anonymous UUID: 1058C7CE-141A-982C-2F1D-4F0EB47F37A1
Crashed Thread: 10 Dispatch queue: NSOperationQueue Serial Queue
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
*** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[NSKeyPathExpression objectForKey:]: unrecognized selector sent to instance 0x60000045ff20'
abort() called
terminating with uncaught exception of type NSExceptionTry a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - Mavericks
Safe Mode - About -
Issues related to Sound Blaster X-Fi Xtreme Audio (PCI Express 1)
Hi, I've recently bought a SB X-Fi Xtreme Audio (PCI Express edition).
Before I address my issue, I'd like to point out that my rig is:
Maximus Extreme (mobo)?
Q6600 (cpu)
ATI4870 (vid card)
4Gigs of DDR3 (ram)
and my OS is Vista Home Edition (32 bit precision)?
And so after physically installing the hardware, I quickly installed everything there was on the CD- this included the drivers available on the CD. After this installation, I restarted then found most recent updates via online sources (creative.com). But even after all of this, I wasn't able to get my microphone to work. Now from my understanding, the jack is shared between Line-In and Microphone and I'm supposed to configure this setting. And so I tried to do that, but my only problem was that I was unable to use any of the available features. After researching for a few hours I found out that I, appearently have to uninstall everything that I had installed and then reinstall everything from online sources (from creative.com-- latest drivers for vista 32 bit). But even then, I still can't use my mic or configure the settings so that I could use microphone instead of Line-In.
Now going back to my actual question, how do I configure the settings so that I could use Microphone instead of Line-In?ERe: Issues related to Sound Blaster X-Fi Xtreme Audio (PCI Express )[ Bumping.
Almost the same problem here.
Sound Blaster X-Fi Xtreme Audio edition, Windows 7 64bit.
I downloaded the latest driver from the Creative site, installed it, update with the update manager and then i installed the console.
Issue number : I DONT have your same console. I dont have a "Mode" button, im stuck in Entertainment Mode. I cant control almost nothing and i dont have all the options u have.
Issue number 2: My mic isnt working good. It's VERY low on volume, i cant be heard without the +20db boost (the only boost option i have, i cant boost more) and even with that acti've that's not that loud.
It is still working good with my onboard realtek soundcard. I cant understand what's the problem and how to solve it.
Ah, my headset is a Creative Fatality. -
After installing V10.5 (which went flawlessly except for this), The Gimp 2.2 no longer works....
I have reinstalled the X11 from the V10.5 installation disk, and downloaded a new version of the Gimp, to no avail.
Here is the error message when starting the gimp. It points to an issue related to an X11 library version, but I don't know what it means or what to do to get gimp back...
Any ideas?
Process: gimp-2.2 [328]
Path: /Applications/Gimp.app/Contents/Resources/bin/gimp-2.2
Identifier: gimp-2.2
Version: ??? (???)
Code Type: X86 (Native)
Parent Process: Gimp [308]
Date/Time: 2007-10-27 11:08:39.108 -0700
OS Version: Mac OS X 10.5 (9A581)
Report Version: 6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /usr/X11/lib/libfontconfig.1.dylib
Referenced from: /usr/X11R6/lib/libXft.2.dylib
Reason: Incompatible library version: libXft.2.dylib requires version 3.0.0 or later, but libfontconfig.1.dylib provides version 2.0.0I installed the gimp 2.4 release candidate, and the gimp did start up. But, it's not too stable... it won't paste a picture, and it crashes alot... guess we have to wait... no gimp for now on OS X 10.5.
-
my computer displays grey screen and apple logo for 10 minutes or more during start up and shut down. sometimes it refuses to shut down . this issues started after installing OS lion. what do i do?
I don't think it's exactly an incomplete installation brody, but most likely in-correct permissions somewhere along the line that either happened, or became magnified during the upgrade. Also, it could be corruption as well.
First thing to do, is boot up holding down Shift key to do a safe-boot so we an clean up any corrupted OS caches, after that do another reboot, but go to the Lion recovery, and scan the HD for errors, repair any if you find them, and then try to do a Repair Permissions job.
That should fix the issue, if not, we can start doing a PRAM reset and SMC for good measure. -
Locked Out of HD After Time Machine Restore Compatibility Issue related to OS
AppleStore installed new HD onto my computer. Unbeknownst to me they put on Snow Leopard. Upon bootup at home I selected the "restore from time machine backup" option. After 4 hours, computer rebooted with all of my logins. Looks good, right?!
Passwords are ignored. Apparently, the issue relates to the fact that my data back up is based upon my "old" Mountain Lion OS from the previous HD.
Call into Applestore and they were clueless how to resolve and they had me contact AppleCare. Spoke with tech who ultimately put me on with a "senior tech" I have a single 10.6 disk as well as a single 10.6.2 disk. I think the HD is running 10.6.7or 10.6.8. I do NOT have a bootable disk (only the single install). She was stumped, put me on hold for atleast 10 minutes when the line went dead. (She verified my return number twice). I haven't heard back and am very frustrated.
I feel like I'm in an Apple Catch-22.
Please, any advice?Follow these instructions for reinstall 10.6, you will need to erase the ENTIRE drive by selecting the drive makers name and size on the left while booted from the 10.6 disk that came with your machine as this is the machine specific version with your free iLife included.
How to erase and install Snow Leopard 10.6
If you use the white 10.6 disk, (it's 10.6.3) then that doesn't have the free iLife, but if you later purchased it from AppStore it can be redownloaded when you get to 10.8 again.
(ideally that older machine should stick with 10.6.8, but you have your files already in 10.8 on the TM drive, so...)
Make sure you erase the entire drive with the Security Erase Zero All Data option, this will "pre-map" off any potentially failing sectors on the drive before they fail with your data on it, it makes your machine a lot more reliable.
Reducing bad sectors effect on hard drives
Once that's all done, log in and setup with your same user name as before (important) and Software Update to 10.6.8, log into AppStore and hold the option key down and click on Purchases, redownload 10.8 and install.
Revisit and redownload other software like iLife etc.
Use the TM drive to bring back copies of your files into their respective folders.
Reboot the Mac holding the command and r keys down, use Terminal and enter resetpassword, a window appears, select your boot volume and user, then reset ACL's, should fix your user permissions issue.
Note: What the AppleStore should have done is installed the 10.8 Recovery HD on your new drive, then you could have just reinstalled 10.8 from that. -
Resolution of CC for Teams - Education issue regarding second install for student interns.
Hi,
I posted a question last week regarding using our second available install for our student interns. I did receive an initial reply but did not receive one for the follow up clarification I posted. Since I need a definitive answer, I am submitting on a new thread. Is there another avenue for me to get an answer? Below please find the link to the original post and the thread excerpted. My response to Kartikay's answer is below. Thanks in advance for your help!
http://forums.adobe.com/message/5767531#5767531
Hi,
I am in charge of administering our recently purchased 10 seat CC for Teams-Education License. Can we use our second install per license on another work station shared by our student interns? I read through the general and CC EULAs as well as going through the forums and did not find a definitive answer that I can show my supervisor. Thanks in advance for the answer!
Hi KimonRethis,
Thank you for reahcing out to us for this query .
As per the Eula, one seat is assigned to one user only but that one user can have the products installed on upto two of Machines that belongs to him . So in our case , since you are installing the product on a machine that does not belong to the original user , you will be violating the terms of EULA .
Please do let us know if you have any further query or not .
Cheers,
Kartikay Sharma
Hi Kartikay!
Thanks for your timely reply. In our case however the machines belong to the department, not the individual user, so would not fair use include install on the department's machines? I am certainly not trying to over parse your response or find a way around the EULA-since money is a large issue for a state institution (California State University, Northridge-I'm in the Marketing Department), I have to do my due diligence to make sure we are being as fiscally responsible as possible and it does seem to me that looked at from the perspective of departmental ownership, the install on a second workstation should be allowed. Thanks in advance for your response.
KImonHi,
Reset the hosts file:
Windows
Choose Start > Run, type %systemroot% \system32\drivers\etc, and then press Enter.
Right-click the hosts file and select Open. Select Notepad for the application to open the hosts file.
Back up the hosts file: Choose File > Save As, save the file as hosts.backup, and then click OK.
Search the hosts file for entries that reference activate.adobe.com (for example, 127.0.0.1 activate.adobe.com) and delete these entries.
Save and close the file.
Mac OS
Log in as an administrator to edit the hosts file in Mac OS.
In a Finder window, choose Go > Go To Folder.
Type /etc.
Select the hosts file and open it.
Back up the hosts file: Choose File > Save As, save the file as hosts.backup, and then click OK.
Search the hosts file for entries that reference activate.adobe.com (for example, 127.0.0.1 activate.adobe.com) and delete these entries.
Save and close the file.
Regards,
Romit Sinha -
How to fix issues related to static electricity
I had my iPad connected to a headphone jack for an external player. There was a small static shock when I touched and unplug it. My iPad mini seems to now be having issues related to static electricity. I am clearly having a issue with the audio output thru the headphones. It works normal until the volume scroller gets to 3/4 up, then there is a very irritating static like noise mixed into the other outgoing sounds.
Also the battery seems to be losing power at twice or three times as fast as before. I've only had it a month and half. Can this be fixed somehow?Hi
I have Iphne 4s/5.0.1 and I'm also stuck with same problem from last 5 days. I have restored/backup/updated the phone as many times as possible. I have been with Vodafone Customer Care (India) and now everyone knows my problem there, but there is no solution.
I have read and tried most of the solutions provided here. Please help me out.
Problem -
1. 3G / Edge working when restore as new phone
2. 3G / Edge stops working as soon as backup is restored
3. Copied and verified both of the files (8218978e4ab0a48035bb92653145a6be872ea858 (Restored new iphone & Restored backup iphone) have different settings. Replacing part of this file or even complete text of this file, changes the date/time stamp of file and on backup restoration it says "Corrupt backup" and phone restarts.
4. I dont want to Jailbreak the phone
5. Using any third party software to install new APN says "Only One APN can be installed"
6. Profile doesnt show any other APN
Is there any other way to delete this file (com.apple.managedCarrier.plist) or just change the section where in string value is "Portalnmms" to required value "iphone" along with key?
Please help me out.
thanks -
I am trying to INSTALL the free trials of AI and PS when I click on the link to install it goes to another page says installing but nothing is happening. I have the FREE TRIAL Creative Cloud Membership.
I am getting very frustrated with this. When I try to install the Creative Cloud thing it asks me to pay even though it says try for free.Hi Mirrormonolith,
Please try the following steps assuming its a MAC:
1) Open Activity monitor and Force quit Adobe CEF Helper, Creative cloud, Adobe IPC Broker & Crash Deamon if available.
2) Try to open, if doesn't work then go to Applications>> Adobe Creative cloud>> Right click>> Get Info>> Click on the Add sign>> Select the user you are logged in>> Give Read and write access.
3) If that doesn't work then enable the root user and launch to update there, check this link on how to enable/sign in to root user Enabling and using the "root" user in Mac OS X
Please let me know of that worked.
-Ankit -
Regarding issue related to RPTBAL00.it's very urgent
hi All,
i am having one issue related to RPTBAL00 report.
this report will dispaly time wage types related to emplyoees.
using this report we can get informtion of time wage type like 9lc1,9lg1,plwp.
Now issue is this report is not running for payroll area 56.it's running properly for other payroll area.the pernrs realted to 56 payroll area have the data in there B2 cluster.i wanted to access data from zl table realted to 56 payroll area.
Please help to solve this issue.
who will help to solve this issue,i will give full points.
Regards,
manjunathi did the same thing.in standard FM hr_time_results_get,it is accessing data from B2 cluster.after that it is checking condition for the date of last successfully run period.only for pernrs related to 56 payroll area it's not wking.for all other it's wking.
also i dnt have autorization to change std FM. -
Hi Experts ,
I have an issue related to Section.
I have an report which shows Department Name and the employees under each department.
For this report, we have used "Section" on dimention Object "Department Name".
Now the issue is , when this report is being exported to PDF. In PDF, for some departments , Department name is in one page and its related employees data are in next page.
In some cases, Department Name and first few records are in same page and rest of records are in next page.( Let's say in department 'X' there are total of 30 employees . So in one page its showing department 'X' and its 10 employees in same page and rest of 20 employees of that particular department are shown in next page ).
And in some cases , only Department Name is in last line of the bottom of the page and its related employees are shown in the next page of it.
Can we have any option, which will show both Department Name and its related data only on the same page?
Please be noted that I am working on BO 4.1 version.
Appreciate for your quick responses.Hi Cris,
Check start on new page and avoid page break in section properties (right click on section block- format section). -
for some reason osx mountain lion has disappeared from my purchases and now when i want to install mountain lion on another mac with the same apple id it wants to charge me for the program even though i have already purchased it. what do i do?
Open the Mac App Store on the other Mac and in the Quick Links sign into your account. See if the Mountain Lion purchase is among hidden apps in the iCloud area of your account info.
-
Some issues after clean installing windows 7 pro 64bit
Hi,
I have a couple of issues, I clean installed windows 7 pro, 64bit, (vanilla) restored my license with ABR and used system update to download all the drivers. (no issues until here) But after restarting the system, I found this issues:
1. I have to put the bios in legacy mode for system to boot. Otherwise it gives me a "no operating system found" message. Is there any way to make a proper installation for the system to boot in UEFI and LEGACY?
2. System update didn't install thinkvantage center. (the program that stays in the taskbar). Should this be installed manually? Or system update should have installed it?
3*. I can not use lenovo driver page of my x120e. In IE it shows me repeatedly the wizard to choose my model, although I enter the correct info there. It starts all over again and again. Tried opera, I can see the drivers page, but I can't browse, or expand none of the sections. (all I can think of this, do I need java for the page to work?)
3*. UPDATE: After installing IE 9, java and flash player, still not working. Opera too. Google Chrome works fine. What's the matter with IE and OPERA? What component do I need to make IE work with lenovo drivers download page?
Can anyone help me? Never had to deal with these issues.
Thanks in advance
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.Hello,
Have you tried wiping the hard disk drive and reinstalling Windows 7 Professional x64 from the factory recovery discs while the BIOS is set to UEFI? If so, did that work?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество
Maybe you are looking for
-
I just bought a new iPhone 5 and want to transfer all the music on my ipod 3rd gen. to my iPhone. the dilema im having is that not all of my music is on my iTunes. is there a way to move all that music?
-
Help needed, Oracle and PreparedStatement setNull for VARCHAR problem
Using the JDBC drivers included with JDK 1.3, I am encountering a strange problem when trying use a PreparedStatement with a NULL parameter in a VARCHAR column. When running the code below (user_id is an integer and login is a nullable varchar) the p
-
I've been using me.com since 2008, back then it was a paid service. When the time came, I switched to iCloud, no problem, I enjoy the service. Recently I need to find some sent emails during the period of mid-2011 then I realized that my "Sent" folde
-
After install "4share" programme then I can't open Firefox 5
after install "4share" programme then I can't open Firefox 5 and ha
-
Yes or No ... Does iMovie'11 work with LION ?
I've upgraded to it, but it can't even get it to import clips to start a project?! I also tried dragging clips to the Project Library. It won't open a project that I started in iMovieHD. What I NEED to do is create a side by side video comparing old