Issue T.code:ME59N

Hi Peeps,
the user able to do the work up to this after noon 1pm after that they
cant able to do this work !!!!
Tcome - Me59n
Regards
vim

this can have hundred different reasons.
I have normally not seen that SAP does not tell anything to the user and just dcline the work.
Can you start ME59N or is not even this possible?
if possible, had you tried to execute with the extended error log (there is a box somewhere in the middle of the screen?
Let the use do a /nSU53 to see if it caused by missing authorization.
check with our basis consultant if there was any transport done from the development system around this time.
Check if you vendor master and material master still have the auto PO indicator set.

Similar Messages

  • Issues upgrading code on WLC

    Hi all,
    Im having issues uploading code on a WLC in a remote location. The WLC is running 4.0.217.0 and im trying to upgrade to 4.2.209.0. I have checked the upgrade path from current to new version and there is no issue upgrading directly from one to the other.
    The issue occurs when I try and upload via TFTP, the Controller starts the code upload and only downloads a portion of the code, starts the extraction then fails with the following messages:
    -Sanity check fails
    -TFTP failure while storing in Flash
    -Failure while storing in Flash.
    I've done a debug from the controller and this is the output:
    Wed Oct 13 01:56:22 2010: RESULT_STRING: TFTP Code transfer starting.
    Wed Oct 13 01:56:22 2010: RESULT_CODE:1
    Wed Oct 13 01:56:26 2010: Locking tftp semaphore, pHost=10.198.136.12 pFilename=/AIR-WLC4400-K9-4-2-205-0-ER.aes
    Wed Oct 13 01:56:26 2010: Semaphore locked, now unlocking, pHost=10.198.136.12 pFilename=/AIR-WLC4400-K9-4-2-205-0-ER.aes
    Wed Oct 13 01:56:26 2010: Semaphore successfully unlocked, pHost=10.198.136.12 pFilename=/AIR-WLC4400-K9-4-2-205-0-ER.aes
    Wed Oct 13 01:56:35 2010: tftp rc=0, pHost=10.198.136.12 pFilename=/AIR-WLC4400-K9-4-2-205-0-ER.aes
                                                                                                            pLocalFilename=/mnt/download/local.tgz
    Wed Oct 13 01:56:35 2010: tftp = 6, file_name=/AIR-WLC4400-K9-4-2-205-0-ER.aes, ip_address=10.198.136.12, msg=Unknown error - refer to log
    Wed Oct 13 01:56:35 2010: upd_get_code_via_tftp = 6 (target=268435457 msg=Unknown error - refer to log)
    Wed Oct 13 01:56:35 2010: RESULT_STRING: TFTP receive complete... extracting components.
    Wed Oct 13 01:56:35 2010: RESULT_CODE:6
    Wed Oct 13 01:56:39 2010: RESULT_STRING: Sanity check failed on file. The file was not downloaded completely!
    Wed Oct 13 01:56:43 2010: RESULT_STRING: TFTP Failure while storing in flash!
    Wed Oct 13 01:56:43 2010: RESULT_CODE:7
    I've tried using a TFTP server (both 3Com and TFTPd) on a local server on site and its still fails. I've also tried using several servers
    as the TFTP server and still no luck.
    Does anyone have any idea why this is still failing? Could this possibly be a lack of space issue on the flash?
    cheers
    Rob

    Hi,
    "Sanity check failed on file. The file was not downloaded completely! "  - This error log is seen only if upgrade path is not right or if TFTP server which you are using does not support transfer of mor ethan 32MB file.
    I understand that you have already tried many tftp servers. If in case, you haven't tried tfttpd32 yet, please download it and give it a try as Cisco recommends to use tftpd32 server.
    Regards,
    Madhuri

  • Sharepoint designer 2013 workflow kickoff issue from code

    Problem Statement: Start a  SharePoint 2013 designer Reusable Workflow with STS Authenticated User. We are trying to start to SharePoint 2013 designer Reusable Workflow with
    STS authenticated user using code but when we do that, we get following error. RequestorId: a3ce6dc6-31ec-23f3-0000-000000000000. Details: RequestorId: a3ce6dc6-31ec-23f3-0000-000000000000. Details: An unhandled exception occurred during the
    execution of the workflow instance. Exception details: System.ApplicationException: HTTP 401 {"error_description":"The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults
    (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect
    the server trace logs."} {"x-ms-diagnostics":["3001000;reason=\"There has been an error authenticating the request.\";category=\"invalid_client\""],"SPRequestGuid":["a3ce6dc6-31ec-23f3-b3ab-aef56fc7e299"],"request-id":["a3ce6dc6-31ec-23f3-b3ab-aef56fc7e299"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["65"],"SPIisLatency":["0"],"Server":["Microsoft-IIS\/8.0"],"WWW-Authenticate":["Bearer
    realm=\"de9da885-f7bf-4564-a3a5-
    Alternate approach we are following : We have created a windows authenticated user and gave him all the necessary permission to trigger the workflow(contribute, full control). Then we are creating the User token
    for that user and opening the site with the help of the generated user token. By this approach workflow is getting triggered.
    The problem in this approach is after ¾ days it gives error when trying to kick off workflow from code with user who has not logged in as we are using this AD user only for kickoff purpose.
    InvalidOperationException:
    Operation is not valid due to the current state of the object
    MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

    There is a userprofile for the user and the issue is not a userprofile. We are using direct AD import and we have full sync every 5 minutes. The workflow gets kicked off using a fix user who never logs in but after 4/5 days the token or something gets expired
    and then we have to manually login with that user and then only code can kickoff workflow with that particular user.
    The problem in this approach is after ¾ days it gives error when trying to kick off workflow from code with user who has not logged in as we are using this AD user only for kickoff purpose.
    InvalidOperationException:
    Operation is not valid due to the current state of the object
    We can not kickoff with current user as current user can not be given contribute rights and we can not do it with system account as its not able to kickoff using system account by design of sp2013 workflow.
    So we need to know how to kcikoff workflow with a user who never logs in or logs in only for the first time and then never in production.
    Below code works for few days and then as user does not login with which we kick off workflow the token or something gets expired after 4/5 days.
    userToken = oSPWeb.EnsureUser(“UserAccountName”).UserToken;
    using (SPSite
    oSPSite = new
    SPSite(SPContext.Current.Web.Url,
    userToken))  //Site collection URL
    using (SPWeb
    oSPWeb = oSPSite.OpenWeb())  //Subsite URL
    SPList list = oSPWeb.Lists["Proposal"];
    try
                                oSPWeb.AllowUnsafeUpdates =
    true;
    SPListItem item = list.GetItemById(proposalID);
    var workflowServiceManager =
    new
    WorkflowServicesManager(oSPWeb);
    var workflowSubscriptionService = workflowServiceManager.GetWorkflowSubscriptionService();
                                //get
    all workflows associated with the list
    var subscriptions = workflowSubscriptionService.EnumerateSubscriptionsByList(list.ID);
    foreach (var
    workflowSubscription in subscriptions)
    if (workflowSubscription.Name ==
    "Proposal Workflow")
    //initiation parameters
    var inputParameters =
    new
    Dictionary<string,
    object>();
    inputParameters.Add("Comments",
    "TEST");
    inputParameters.Add("ItemId", item.ID);
    inputParameters.Add("WorkflowStart",
    "StartWorkflow");
    workflowServiceManager.GetWorkflowInstanceService().StartWorkflowOnListItem(workflowSubscription, item.ID, inputParameters);
    break;
                                oSPWeb.AllowUnsafeUpdates =
    false;
    catch (Exception
    ex)
                                Classes.Logger.WriteErrorLog("Sumbit",
    "kickoffWorkflow1", ex,
    MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

  • MSI BIG BANG Xpower II boot issue - LED code 9A

    Hello all,
    I am facing to issue after BIOS update from 2.6 to 2.7. After update was machine working properly. But after one crash of OS cant boot at all. Crash was probably caused by overloading GPUs but there were no issue with cards and this board during 3 weeks of 100% GPU and CPU load. No video (connected only one GPU card), no Numlock key/led is working (this is good test if PC is reacting even no picture).
    Board: MSI BIG BANG XPOWER II
    Bios: Version 2.7
    VGA:  4x AMD SAPPHIRE Radeon R9 290x
    PSU:   Silverstone 1500W (gold)
    CPU:   Intel Core i7-4930K 3.4GHz (3.9GHz Turbo Boost) LGA 2011
    MEM: 1x Kingston 8GB DDR3 1600MHz CL10 HyperX blu Edition
    HDD: WD Blue 256gb 5400
    COOLER: NOCTUA NH-D14
    OC: 3.9GHz
    OS: Windows 8.1 64bit Professional
    Tried
    - switch BIOS from A to B also C (with small switch).
    - cleared Cmos with onboard button.
    - removed Battery for a while
    System start booting and stuck always on 9a LED code.
    From manual it looks like it is USB, SATA initialisation phase.
    I think CPU or Mem should be fine.
    Anyone who met this issue or any sollution?
    I am thinking to replace this board under warranty.
    Thanks for any info..

    Quote from: Wigo on 21-March-14, 02:45:54
    Hi Froggy,
    Thanks for reply.
    But I have tried disconnected all USB devices and got same LED code. If this happend because of some USB configuration in BIOS why reset of CMOS did not help?
    It very well could be setting(s) in the BIOS, but I am not qualified to be of much assistance when Win 8/8.1 is involved.

  • Re: Cd/DVD drive issue - error code 39 on Satellite P series

    Hi,
    This is my first request for help.
    My CD/DVD drive is no longer recognized and when I go to Device Manager and click on CD/DVD I am informed that the file cdrom.sys is there but cannot be loaded.
    An error number 39 is reported.
    Any advice would be greatly appreciated but please keep it simple to one line actions if possible.

    Of course you can get some advices ;)
    I think you would find it faster if you would search in the forum firstly but I will try to help you too.
    There error code 39 is very common issue and can be solved easy;
    Check this MS knowledge base article:
    http://support.microsoft.com/kb/314060/en-us
    So firstly remove the CD/DVD drive from the device manager.
    Then access the registry using the regedit command and remove the Upperfilters and Lowerfilters values completely from the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    Reboot the notebook and wait till the CD/DVD drive was installed again.
    Thats it. ;)

  • I am having a hard drive issue with code 4MEM/6/4000000:6x7a5db418. What does this mean and how do I fix it?

    I recently ran the Utility Disk and was verifying the Hard Drive due to some permission issues and found a problem.  It told me to run the application startup disk to do another diagnostic which I did.  It confirmed there is an issue and gave me the following code = 4MEM/6/4000000:6x7a5db418.  What does this code mean and how can I go about fixing the problem?  Any wisdom with this would be greatly appreciated. Thanks!

    the meanings to those codes are not made public and only Apple certified technicians have access to them.

  • Adobe AIR 3 Performance Issues and Code Signing Certificate Problem

    I recently updated to Adobe AIR 3.0 SDK (and runtime) doing HTML/Javascript development using Dreamweaver CS5.5 in a Windows 7 Home Premium (64 bit).
    The AIR app I'm developing runs well from within Dreamweaver. But when I create/package the AIR app and install it on my machine:
    1. The app literally CRAWLS running it in my Windows 7 12G RAM machine (especially when I use the mouse to mouse over a 19-by-21 set of hyperlinks on a grid) --- IT IS THAT SLOOOOWWWW...
    2. The app runs fine in my Mac OS X 10.6.8 with 4G RAM, also using the Adobe AIR 3 runtime.
    About the Code Signing Certificate problem:
    When I try to package the AIR app with ADT using AIR's temporary certificate feature, I get the error message "Could not generate timestamp: handshake alert: unrecognized_name".
    I found some discussions on this problem in an Adobe AIR Google Groups forum, but no one has yet offered any resolution to the issue. Someone said Adobe is using the Geotrust timestamping service --- located at https://timestamp.geotrust.com/tsa --- but going to this page produces a "404 --- Page not found" error.
    The Google Groups Adobe AIR page is here:
    http://groups.google.com/group/air-tight/browse_thread/thread/17cd38d71a385587
    Any ideas about these issues?
    Thanks!
    Oscar

    I recently updated to Adobe AIR 3.0 SDK (and runtime) doing HTML/Javascript development using Dreamweaver CS5.5 in a Windows 7 Home Premium (64 bit).
    The AIR app I'm developing runs well from within Dreamweaver. But when I create/package the AIR app and install it on my machine:
    1. The app literally CRAWLS running it in my Windows 7 12G RAM machine (especially when I use the mouse to mouse over a 19-by-21 set of hyperlinks on a grid) --- IT IS THAT SLOOOOWWWW...
    2. The app runs fine in my Mac OS X 10.6.8 with 4G RAM, also using the Adobe AIR 3 runtime.
    About the Code Signing Certificate problem:
    When I try to package the AIR app with ADT using AIR's temporary certificate feature, I get the error message "Could not generate timestamp: handshake alert: unrecognized_name".
    I found some discussions on this problem in an Adobe AIR Google Groups forum, but no one has yet offered any resolution to the issue. Someone said Adobe is using the Geotrust timestamping service --- located at https://timestamp.geotrust.com/tsa --- but going to this page produces a "404 --- Page not found" error.
    The Google Groups Adobe AIR page is here:
    http://groups.google.com/group/air-tight/browse_thread/thread/17cd38d71a385587
    Any ideas about these issues?
    Thanks!
    Oscar

  • F110 Issue-sort code issue

    Hi Gurus,
    We have one issue by F110,by using the bank transfer.so all the payments are cleared.and DME file is generated.we have to upload to the bank.before that we have to convert the file into notepad.by using our local software we upload into our PC.but here
    some vendors are not picking up the right sort codes.on which base it is picking up.only for some vendors we are facing this issue.
    Thanks in advance
    Jana

    Dear,
    Please check the vendor master for the sort key entry in accounting information accounting, compare the sort key with other vendor masters. Check whether reconciliation GL in vendor master is also given the same sort key as in the vendor master.

  • Issues with Code 39 Font

    I am using Crystal Reports XI and have created reports that contain a single barcode. When I export the reports to a PDF format while in the designer preview the report exports fine with the barcode showing correctly. When I publish the report and automate to send to a file folder and a designated printer, both reports are printing without the code 39 Font and the barcode shows in regular Arial font. I have installed the Font both on my personal machine and the server that the reports are published too. To verify that the problem was not isolated to the PDF doc I tried printing to a word format and the report prints the code 39 font in the word doc that is stored in the file folder, but the printed report is still showing as a regular Arial font. Sending to the same printer from the designer preview printed the barcode font so the issue is also not at the printer level. Can anyone advise on the best action to take to resolve this issue with the missing Font in the printed report? Do I need to do anything special to embed the Font in the distributed report? Any help that can be provided is greatly appreciated. Thank you in advance.

    Hi Greig,
    Did you get your problem figure out?  I'm having the same issue.  Please let me know how you got this problem resolve.  Thanks

  • AdvancedDataGrid ItemRenderer Issue using code behind method

    I have been trying to get an itemrenderer to correctly work in an advanveddatagrid. I've used several itemrenderers in the past so this is pretty basic. I haven't however tried to attach to a grid that is inside a page using the code behind method. My issue is that the grid breaks if I try to put more than one visual component on the renderer. See the images below:
    Here is an example with a plain canvas itemrenderer:
    As you can see the scroll bar appears and everything looks normal.
    Here is the behavior if I add a label inside this component:
    The scroll bar disappears and I'm unable to close the itemrenderer correctly.
    Has anyone come across this issue before? Thanks for any help on this one!

    I can't post all of the code since it's on a much larger page but hopefully this gives you an idea:
    <custom:ClientPlans xmlns:mx="http://www.adobe.com/2006/mxml" width="920" height="550" xmlns:flexlib="http://code.google.com/p/flexlib/"
            fontFamily="HelveticaNeue Condensed" fontSize="11"
            xmlns:components="components.*"
            disabledColor="#FFFFFF"
            themeColor="#FFFFFF"
            horizontalScrollPolicy="off"
            verticalScrollPolicy="off" 
            backgroundColor="#ffffff"
            cornerRadius="10"
            borderStyle="solid"
            borderThickness="0"
            horizontalCenter="0" verticalCenter="0" color="#808080">
    <mx:AdvancedDataGrid id="adgPlans" width="100%" height="497" selectionMode="singleRow" editable="false"
                            color="#000000" fontSize="14" selectable="true"
                            liveScrolling="false"
                            showHeaders="false" variableRowHeight="true"
                            disclosureOpenIcon="@Embed(source='/images/gridMinus.png')"
                            disclosureClosedIcon="@Embed(source='/images/gridPlus.png')"
                            folderOpenIcon="@Embed(source='/images/folderOpenIcon.png')"
                            folderClosedIcon="@Embed(source='/images/folderclosedIcon.png')" borderThickness="1" borderStyle="solid">
                              <mx:dataProvider>
                                     <mx:GroupingCollection id="gcGroup">
                                            <mx:grouping>
                                                <mx:Grouping>
                                                    <mx:GroupingField name="ClientName"/>
                                                </mx:Grouping>
                                            </mx:grouping>
                                     </mx:GroupingCollection>
                              </mx:dataProvider>       
                            <mx:columns>
                                <mx:AdvancedDataGridColumn id="clientNameColumn" dataField="clientName" headerText="Client" sortable="true" width="200" />
                            </mx:columns>
                            <mx:rendererProviders>
                                <mx:AdvancedDataGridRendererProvider
                                    column="{clientNameColumn}"
                                    columnSpan="0"
                                    depth="2"
                                    renderer="components.subcomponents.clientRenderer3"/>
                            </mx:rendererProviders>
                        </mx:AdvancedDataGrid>
    </custom:ClientPlans>
    Code-Behind:
    // ActionScript file
    package com.name
            import mx.controls.AdvancedDataGrid;
        public class ClientPlans extends Canvas
            public var adgPlans:AdvancedDataGrid;
         public function ClientPlans ()
                super();
                this.addEventListener(FlexEvent.CREATION_COMPLETE, creationCompleteHandler);
            private function creationCompleteHandler (event:FlexEvent):void
                  trace("cc");
    Item Renderer:
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Canvas xmlns:mx="http://www.adobe.com/2006/mxml"
        width="100%" height="150" borderStyle="solid" borderThickness="2" borderColor="#56ACD1" cornerRadius="8"
        fontFamily="HelveticaNeue Condensed" color="#000000" backgroundColor="#FFFFFF" backgroundAlpha="1.0">
        <mx:Label text="Hello!?"/>
    </mx:Canvas>

  • Publishing issue: return code 120 was returned from the server.

    Hi
    I'm working on an issue when attempting to publish a crystal report using the sap toolbar. When I try to publish I am seeing the following error
    An error occurred while saving and/or publishing. The return code 120 was returned from the server.
    Does anyone know what this return code means or where I can look it up?
    Thanks
    Daniel

    Hi Alexander,
    Looks like you are encountering the same issue as us. The issue seems to be just being able to save the report to bw.
    We are on sp2 fix pack 2.3 but experienced this behavior on sp2 as well
    We tried a few tests against the server with sp2 installed
    Client machine 1 # older version (just base install)
    Configuration
    Bobj client 12.1.0.882
    crystal reports 2008 sp 1 12.1.0.892
    sap ik 12.1.0.890
    Behavior
    -open a report in bw and preview in crystal - ok
    -open a report preview and save report in bw using same name - ok
    -create a folder under sap bw role using save as dialog box that comes up when selecting save as on the sap toolbar - ok
    -open a report preview and save report under different name - ok
    - create a new report and save ok
    Client machine 2 # same version as server with sp2 installed
    Configuration 2 bobj 3.1 sp2 fix pack 2.3
    Bobj client 12.2.3.467
    crystal reports 2008 sp 1 12.2.3.467
    sap ik 12.2.3.467
    Behavior
    -open a report in bw and preview in crystal - ok
    -open a report preview and save report in bw using same name - ok
    -create a folder under sap bw role using save as dialog box that comes up when selecting save as on the sap toolbar - ok
    -open a report preview and save report under different name I get the 120 error
    - create a new report and save I get the 120 error
    We ran rfc traces, authorization traces and found nothing.
    Our support ticket is with the SAP BW team now and we are waiting to work with them. I will update the thread as we find more information.
    Thanks,
    Daniel

  • SETS Issue T-code GR55

    Dear Experts,
    I have an issue with a SET which is created by me in test systems.
    I have created the SET using T-code GS01 and assigned the SET to a report.
    When i am checking the total ALL BA column, the New SET amount is not getting added in the Total ALL BA Column.
    Basically, the new SET Amount should get added in the Total ALL BA Column but in my case it is not happening.
    Please provide your inputs, if i need to add any formula and in my case the report which is having my NEW SET is not related to a Report painter.
    Thanks
    Sreekanth

    Hi sreekanth
       1 . normally we will use set GS01 ,to control the transaction codes (t.code) for specific report
        2. this is mainly used for special ledger purpose substitution for FI and CO , you can create this fi sub ledger document in gb01 .
        3. control and restricts the user level. eg: if some user enter wrong values that time based on setting which we have maintained in OBBH/OB28 . it will through the error masg
    you can set the codes based on your requirement

  • Apple Application  Support not found and i have re downloaded itunes 4 times how can i fix this issue error code 2

    Please i need some help here with this issue i am using a windows 7 acer and i would like to be able to listen to music while im gaming is there anyway i can fix this issue i am having i keep getting Error code 2  (windows error 2)

    You could try downloading and installing 7-Zip (free) and downloading a fresh copy of the iTunes installer, unpack the installer into its components using 7-Zip then try installing AppleApplicationSupport again. It may still fail to install but you may get more useful error messages as to why not.
    See also Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Captivate 5 Installation Issues - Exit Code 7

    I have been trying to install Captivate 5 in Windows Vista SP1 32-bit and have been getting the following message:
    Exit Code: 7
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 27 error(s), 30 warning(s)
    WARNING: The payload with AdobeCode:  {8E355243-1A34-4EE8-A743-C166E68CF5C0} has recommended dependency on:
    WARNING:         Family: Adobe Web Suite CS5
    WARNING:         ProductName: Adobe Media Encoder CS5 X64
    WARNING:         MinVersion: 0.0.0.0
    WARNING:         This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
    WARNING:         Removing this payload from the dependency list.
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    WARNING: Payload cannot be installed due to dependent operation failure
    ERROR: MsiConfigureProductEx failed with error: 1601
    ERROR: The following payload errors were found during install:
    ERROR:  - Adobe CSXS Infrastructure CS5: Install failed
    ERROR:  - Microsoft_VC90_ATL_x86: Install failed
    ERROR:  - Microsoft_VC90_CRT_x86: Install failed
    ERROR:  - Microsoft_VC80_ATL_x86: Install failed
    ERROR:  - Adobe Player for Embedding: Install failed
    ERROR:  - AdobeHelp: Install failed
    ERROR:  - Microsoft_VC90_MFC_x86: Install failed
    ERROR:  - Adobe Media Encoder CS5: Install failed
    ERROR:  - Suite Shared Configuration CS5: Install failed
    ERROR:  - Adobe Linguistics CS5: Install failed
    ERROR:  - AdobeTypeSupport CS5: Install failed
    ERROR:  - Adobe CSXS Extensions CS5: Install failed
    ERROR:  - Adobe Captivate: Failed due to Language Pack installation failure
    ERROR:  - Adobe Captivate Quiz Results Analyzer: Install failed
    ERROR:  - Microsoft_VC80_CRT_x86: Install failed
    ERROR:  - DynamiclinkSupport: Install failed
    ERROR:  - Adobe WinSoft Linguistics Plugin CS5: Install failed
    ERROR:  - HIL Help Search: Install failed
    ERROR:  - Required Common Fonts Installation: Install failed
    ERROR:  - Microsoft_VC80_MFC_x86: Install failed
    ERROR:  - Microsoft_VC80_MFCLOC_x86: Install failed
    ERROR:  - Recommended Common Fonts Installation: Install failed
    ERROR:  - Adobe Captivate Reviewer: Install failed
    ERROR:  - AdobeJRE: Install failed
    ERROR:  - Adobe Captivate_AdobeCaptivate5en_USLanguagePack: Install failed
    I have tried all of the suggestions in this forum as well as the Adobe Support Advisor with no success.  I just spent 45 minutes on hold with Adobe Technical Support only to get disconnected. Any suggestions?

    Hi there,
    In order to nail down the actual root cause of the issue, we would require the installation log files. You can find them at: <root>:\Program Files\Common Files\Adobe\Installers.
    Please send us the appropriate log files. You can zip the .log file in a folder -> upload on acrobat.com ( its free) and then share the link with us.
    -Manish
    blogs.adobe.com/captivate

  • Macbook Pro Retina & Mediasonic ProRAID USB 3 issue - Error Code -50

    Hi everyone,
    I have a Mediasonic ProRAID 4-bay container (model HFR2-SU3S2) connected to my new Macbook Pro Retina via USB 3.0 (using the replacement pc board supplied by Mediasonic that provides true USB 3 speeds for supported apple devices). It is currently connected through a USB 3 hub but the same issue occurred when I had it directly connected to the laptop.
    I've noticed that when the laptop display goes to sleep (beyond the screen saver), when I return to do work and wake the display (a Dell 3011 30" connected using the apple dual link mini display adapter), the drive is mounted and I can browse the folder structure without a problem.
    However, whenever I do anything to write to the volume, like to create a folder, I get 'Error Code -50', preventing me from writing. Similarly, if I try to work on an image stored on this volume from within Adobe Lightroom, for example, I get Write error messages as well.
    I've found that the only short term fix is to unmount and powercycle the RAID box. Are there any other remedies that I can look into? I have my Macbook Pro configured to NOT spin down any hard drives nor does it go to sleep (other than the display) when connected to AC power.
    Thanks in advance for any help!

    Your still within your 14 day no question asked return period. 
    IMO, I'd return it for a refund and BTO the 15.4" MB Pro without retina.
    1.  High Resoulution Antiglare WS (1680X1050)
    2.  Upgraded 7200 RPM drive (upgrade to SSD later)
    I've read lots of post (here) about issues with the 1st Gen rMBP.
    I've also read lots of positive articles in favor of the rMBP.

Maybe you are looking for

  • Communication between a driver and application.

    Communication between a driver and application. I am writing a driver for a PCI card. I have found very good examples of how the driver should be build. Where do I find the information about how the user mode application should be talking the driver.

  • Secure link to iTunes Store Failed using XPSP3

    I cannot log into the iTunes store. When I run diagnostics it indicates Secure  Link to iTunes Store Failed. It does not appear to be my related to McAfee security software as the issue remains when the file wall is disabled. I have following the tro

  • Final Cut Studio 2 Licensing

    Quick question that someone may know the answer to. I just recently purchased Final Cut Studio 2 and i am waiting for it to arrive. My question is, does Final Cut Studio 2 allow me to install it on both my Mac Pro and my PowerBook laptop? Or is it ju

  • Mac VZA for Pantech 290 released - but does it work

    I downloaded the new 4G Pantech 290 VZAccess software for Mac tonight.  It downloads and installs just fine but, even though it shows all but one of the bars green for 4G (here in Denver), when it connects it only connects with 3G and 1x.  This is in

  • HOW TO USE ATTRIBUTE VALUE IN FOX FORMULA LOOP

    HI, IAM SUMMING UP AMOUNT BASED ON BELOW COMBINATION AND THROWING MESSAGE IF AMOUNT IS EXCEEDING OPENPO VALUE....AND IS WORKING FINE...NOW I HAVE A ENHANCE MENT THAT I HAVE TO USE ATTRIBUTE PROFIT CENTER VALUE IN THE LOOP. I HAVE DECLARED THIS --- PC