Issue to drill down from a report

Hi,
Our requirement is we need to show three different graphs in a single report representing different data, from that we need to drill down to a new different report  ;
Two approaches we tried with crystal report are;
1.     We put three graphs and the table in the single report and tried to implement drill down for each graph. We could group data on the basis of first pie chart data and could drill down. But while we tried to group data for second bar chart grouping is happening only as a sub group of first group. Ie, we cannot group data independently for different charts.
2.     In the second approach we created different  3 sub reports and added in to a main report. But Crystal report is not supporting sub report to a sub report. Ie, we cannot go to drill down report.
It would be a great help, if you could suggest some solution.
Thanks,
Jomy

Hi,
As per my understanding, you have one report say Parent1 (SA1) and one Report say Child1 (SA2), now you want to pass some values from parent1 to child1.
1> Create 1 interim report from parent1.
2> In your Child report in filter part use result based on another analysis.
Please let me know if it resolves yourissues.
Thanks
Anirban

Similar Messages

  • Error Message appears when drilling down from a report.

    Hi,
    I am using CR XI R2.
    I have an rpt file that displays a chart from a sub report.
    I tested it on the CR designer and report viewer - works ok.
    When I display this report in my .Net application, I get an error message when drilling down from this chart : "The Report Application Server failed"
    When looking at the log files I see this error message:
    4 19 13:11:14.770 5336 5564 (\servers\ras\dtsagent\reporthandler.cpp:11622): CReportHandler::buildReportViewerError: CSResultException thrown.   ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11618 ErrorCode:997 ErrorMsg:"" DetailedErrorMsg:""
    This is a Viewer error - but when drilling down from the Report Viewer I don't get this exception.
    Does anyone know what this mean?

    Too strange and my require a phone support case;
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
    Three ideas:
    1) Install CR designer on one of the boxes where this does not work and try to run the report there
    2) Add a line to your code and save out the report just after your database logon once ( .saveAs). try to run this report in the CR designer.
    3) Use the [modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility to compare the runtime - both CR and db client between computers that work and those that do not.
    Ludek

  • How to drill down from summary report to detail report using RRI?

    Dear all:
      A problem about RRI. Please help me!
      1.I create a BEx query 'Q1' to show summary data.
      2.I create a BEx query 'Q2' to show detail data.
      3.In Q1, all the products are shown each row.
           The 1st coulmn is 'Balance in the begin', it shows how many customer claim cases are opened before this week.
           The 2nd coulmn is 'New', it shows how many customer claim cases are initalized in this week.
           The 3rd coulmn is 'Close', it shows how many customer claim cases are closed in this week.
           The 4th coulmn is 'Balance', it shows how many customer claim cases are still opened now. And this column is calculated by this fomula as follow:
             'Balance in the begin' + 'New' - 'Close'
       4.In Q2, it lists each customer claim case. Include ClaimNo, Sold-To Party, ProductNo...
       5. I set Q1 as sender, Q2 as receiver.
       6. If I focus on the value of 'New' or 'Close' and then go to 'Q2', the correspond detail calim information in 'Q2'. But it is fail if I focus on the value 'Balance'.
       Why?
    Thanks,
    Jolin

    I don't know if you can use the hyperlink to call a subreport but the following has worked for me in Crystal 10:
    1. In your main report create a group on the field you want to pass to the subreport.
    2. In the Group Footer, use the "Insert Section below" menu command so that you have a Group Footer 1a and a Group Footer 1b.
    3. Put your table fields in the Group Footer 1b section (this would be similar to your Details data).
    4. Put the sub report in the Group Footer 1a section. Set up the links to the subreport from a table field in your main report.
    5. Right-click on the sub-report, select "Format Sub-report". Click on the "x-2" button to the right of the Suppress option and enter "DrillDownGroupLevel = 0" in the "Formula Workshop-Formula Format Editor-Suppress" window and save it.
    When you double-click on your data field (i.e. the field in Group footer 1b) it should drill-down and run your subreport.

  • Drill down from PDF report

    Hi,
    Is it possible to drill down to the detail report from the
    master report in PDF format in Reports 6i?
    Regds,
    Ruckmangathan

    hello,
    a way of inmplementig a drill-down report in PDF would be to
    create hyperlinks in your report that link either back to the
    same report, passing different parameters or linking to anoother
    report.
    when a user then displays the report the hyperlinks will enable
    to "drill-down" by (re-)executing a report.
    regards,
    the oracle reports team --pw                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Issue with drill down in Financial Reporting 11.1.2.2

    Hi All,
    I have a requirement like this :
    I have different dimensions for Year and Period(Period has half years and also quarters ).
    The requirement is like that when the report opens up the rport should look like this:
                             YearTotal
                        FY12            FY13
    Accounts
    Now the user  wants to drill down on YearTotal and it should show in the following way:
                               H1                      H2
                     FY12      FY13    FY12      FY13
    Accounts
    and so on.
    Still now whatever I have tried I am unable to acheive this . Any ideas whther this is acheivable or not ????
    Regards,
    Saurav

    Even without drill(allow expansion) you can only achieve that only by using merge option.
    With merge the drill will not work.
    It'll not be a pretty report.
    Regards
    Celvin
    http://www.orahyplabs.com

  • Drill down from the financial reports

    When generating a P&L or Balance sheet, it is not possible to view what transaction the amount is made of. you have to either generate a general ledger report or have to chart of account window open at the same time. Simple programs like quickbooks have the functionality to do drill down from any report. we have multiple customers for whom this situation is very aggravating.
    We hope you can find a solution or make this part of a new release.
    Thank you
    Sophie St-pierre

    Hi
    I hope you will get answer from this solved using pop up window for drill down
    Thanks & Regards
    Harsimran

  • Issue with drill down to FAGLB03

    We have report painter reports that were linked to FS10n (Balance display) on the report interface (in the report library - GR22) so that when we drill-down on a line item in the report, it will show all the detail postings for that line item from FS10N.    
    We recently created a new client by copying our current system and applying a patch.  We are on ECC 5.0, and the new patch level is 17.   When testing this new client, we found that FS10N no longer works.   We did activate the new GL but we did not completely turn on all the functionalities.  THis is the same as in our other clients (QAS, PRD) and FS10N works perfectly there (QAS and PRD are on ECC 5.0 patch 10). 
    In the new client, when we go into FS10N, it gives us a message to use t-code FAGLB03.    We then changed our report painter library to interface to FAGLB03.  However, when we drill down from the report, it's still showing FS10n.  
    In the new GL, is there another way to configure the report interface?  I used t-code GR22. 
    Thank you,
    Lanny

    Hi Sunil,
    Thanks for the reply.  And yes, the message regarding FAGLB03 is informational only so this is fine if I were to go to FS10N directly to look up a specific account balance.  But when I drill down from my report, I only get to the selection screen of FAGLB03/FS10N and the account number showing on that selection screen is not the account number on which I drill down on from the report.  
    In our PRD or QAS client, when I drill down from a line item in the report, it immediately takes me to the line item display where it listed all the documents posted to that specific account, so I did not have to reinput the account number and re-execute FS10N.  
    I tried assigning FBL3N in the report interface, but that did not work either.  The report drilldown still takes me to the selection screen of FAGLB03. 
    rgds,
    Lanny

  • Drill down from infocube to DSO

    Hello Gurus,
            when implementing a report based on infocube, how to drill down to DSo on which this infcube is based?
    Many thanks,

    U have to do RRI (Report-Report Interface)...use tcode RSBBS...
    for example.. u have totals report on cube and line items report on DSO..
    using RRI, u can drill down from cube report to DSO report... pls check help.sap.com for details

  • Drill down into a report

    Hi!
    I've been working on a report to be able to drill down into another "detailed" one, and I was able to do it but not exactly the way i needed.
    I created an action link for the column values, but my problem is that for EVERY value, i always drill into the same exact report, and my idea is to drill into the same report for all of them, but with different parameters for each one
    Example:
    Sales representative revenue
    John 230K
    Mark 100K
    Martin 500K
    I've set a drill down for the revenue column, but all 3 values are obviously drilling into the same exact report, and I want to set it in a way I can tell the sub report "give me the detail report but only for the corresponding sales representative"
    If i click on 230K, I want to see the "detailed report" only for John's oppties. If i click on 500K, I want to see the "detailed report" only for Martin's oppties. And so on...
    That's the whole deal. I don't know how to do that.
    Thanks for your help,
    Martin

    Hi, thanks for your answer
    I'm navigating from a master to a detailed report, and i have already set the attribute as "is prompted" but Its not enough. Let me try to explain why
    Lets say I have this example report:
    Prompts: Primary position
    Table:
    Primary position | forecast
    John | 768687
    Paul | 200000
    George | 923882
    then I drill down on "Paul" to the next position level, so the report changes to something like this:
    Primary position | secondary position | forecast
    Paul | Jane | 100000
    Paul | Martin | 100000
    So, now... I want to drill into Martin's 100.000 forecast (drill into a detailed report) and despite I have the primary position set as "is prompted", I have no prompts for second, third, or n-position... So If I drill down from martin's 100000 forecast, I will only be able to pass the primary to the detailed report, and It will only be able to show Paul's 200000 forecast details
    I want the detailed report to pull Paul for primary, Martin for secondary, and show only the detailed report for that 100000 forecast value
    That's the issue
    I hope I was clear enough
    Thanks,
    Martin

  • When drill through from FR report, navigate to FDM landing page.

    Hi,
    Data loaded in HFM 11.1.2.1 using FDM 11.1.2.1 and it has been replaced by ERP integrator 11.1.2.1.501. When we perform drill through from Financial reporting report it is navigating to the FDM landing page instead of ERP integrator landing page. In FDM landing page, showing the ERROR:
    "Error: Error Retrieving recordset"
    Anyone please help me to solve this issue.
    Thanks,
    Yamuna

    Hi ,
    My guess is that , when you loaded the data from ERPi the drill regions created by FDM have been over written. Hence you are not able to drill down to the FDM page. This happens in most of the scenarios , where if the data is loaded across an intersection using FDM and then again the data is loaded in the same intersection using some other way like Flat Files or ERPi the Drill Regions or Drill POVs get compromised.
    To confirm whether your FDM drill back is working or not , create a simple form using any of the intersections from your dimensionS ( not the same ones used above ) and load a single line of data using FDM across those intersections in the form. Try drilling back to the FDM Landing Page and check. Same way , create a report for the same intersections and check drill back to FDM. Remember to check the :Drill - Through" check box in the property grid in the Grid Properties for that report.
    Regards

  • Drill Down Functionality in Report.

    Hello Gurus,
    I have one requirement where end user want to use drill down functionality for OBIEE reports. we are using 10.1.3.4.1 version rite now.
    Now what user wants is he want to drill down from Country -->State --> County -->City --> Zip code, Street Address, House #.
    Now in Obiee we can build the dimension hierarchy in BMM to achive the goal, But if you see the last level of hierarchy they want to see 3 Columns (Zip code, Street Address, House #) when they drill down from City...
    Now in Obiee We can use prefered drill down path only for one column, how do i develop the functionality they shows 3 Columns in last drill down???

    Hi
    Select all the three columns as drill down keys in the city. This should resolve.
    No need to create separate hierarchy.
    Hope this helped/ answered.
    Regards
    MuRam

  • PIE Chart Drill down in bex report

    Hi Friends,
    In my bex report i have pie chart for year 2008.
    Shall I drill down on this report means if  i click on one part of the pie chart will i go to another report or another pie chart.
    Can any one pls tell me is it possible .
    Thanks & Regards,
    Ramnaresh.
    Edited by: ramnaresh porana on Dec 1, 2008 6:35 AM

    Hi ,
    Thanks for reply.
    how it is possible from context menu of the pie chart , i have seen the context menu of the pie chart but i did not get any related option for this one.
    Can you pls guide me.
    Thanks & Regards,
    Ramnaresh.

  • Drill down in webi report

    Hi,
    Is there any way to display the drill down in webi report.  For example:
    YearQuarterMonth--Week.......
    if the drill the Year option I can able to see all Quarter level measures and if I drill down further I can get into Month level measures and Week level and so on .
    But my question is When I drill the Year to Quarter...I want it to display both Year and Quarter and If I drill down further
    I want all the measures related to Year ,Quarter, Month and so on
    Basically want I need is a tree level hierarchy......Could any one plz help me what all changes I need to make in order to get a detailed report.
    Thanks
    Sushma
    Edited by: Sushma Reddy on Feb 9, 2010 9:44 PM

    Hi,
    Try to create a Class e.g Time in universe and objects to that class as year, quarter,month as
    Year Object -> data type -> D/N
    select To_date('sysdate','YYYY) as year from dual
    Month object-> data type -> D/N
    select to_date)'sysdate','MM') as month from dual;
    Quarter -> data type -> D/N
    case when @select(Time/Month) in (1,2,3) then q1
             when @select(Time/Month) in (4,5,6) then q2
              when @select(Time/Month) in (7,8,9) then q4
               when @select(Time/Month) in (10,11,12) then q4
    endcase
    Then create a hierarch in tools -> hiearchy ->custom hierarchy and add the above class there then in any report (Deski/WebI)
    you will get the above hierarchy and use it according to your requirement.
    Cheers,
    Suresh Aluri.

  • Cannot drill down from 2nd lowest level to lowest level of hierarchy

    In my item master hierarchy, I cannot drill down from the 2nd lowest level (Product Class) to the lowest level (Item Detail).
    When I add another level between these 2 levels, then I can drill down from Product Class to this new level, but I cannot drill down from this new level to the lowest level.
    Also, if I set the preferred drill path at any level to drill down to the lowest level, it instead drills down to next level down intead of of drilling to the lowest level.
    Any thoughts as to why I would not be able to drill to the lowest level of this hierarchy?
    Thanks,
    Travis

    OK, next check, any security in place on the presentation columns which would make the lowest level column unavailable to the user account?
    Are you running the report as Administrator?

  • Drill down from a line graph? Make the entire graph click-able?

    Guys, i can drill down from other types of charts except a line chart.
    Is there anything that is special about the line chart?
    Also, can i make the entire graph click-able? So, instead of clicking on a bar to trigger a linked report, can the whole chart be a link basically?
    Thanks for your help

    There is not special with the line graph..... Just click on the data symbol to drill or navigate. These settings can be found under the "additional Charting Option" button.
    regards
    John
    http://www.obiee101.blogspot.com/

Maybe you are looking for