Issue to execute standard reports in SRM 7.0

Hi Gurus,
We are implementing SRM 7.0 and we are trying to execute SRM reports on enterprise portal.
But in all cases, after execution the system shows a portal runtime error (see details at the end of the message).
The user have assigned operational and strategic purchaser roles.
Also we have activated the BW independant analytics (tx /SAPSRM/SW_ACTV) and we have inactivated the BW based analytics (tx /SAPSRM/SW_ACTV).
Are the previous mentioned customizing tasks correctly performed?
Are there any other customing or funtional steps we need to perform?
Is BW mandatory to perform report executions activities in SRM executed by mean enterprise portal?
Thanks in advance.
Best regards,
Horacio Miranda
Portal runtime error.
"An exception occurred while processing your request. Send the
exception ID to your portal administrator.
Exception ID: 11:33_24/05/11_0320_18715150
Refer to the log file for details about this exception."
error 2011-05-24 11:33:40:594
Exception ID:11:33_24/05/11_0320_18715150
[EXCEPTION]
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component... [see details]
Exception ID:11:33_24/05/11_0320_18715150
[EXCEPTION]
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.common.bp_folder/com.sap.pct.erp.common.roles/com.sap.pct.erp.common.erp_common/com.sap.pct.erp.common.lpd_start_bw
Component class : com.sapportals.portal.sapapplication.SAPApplicationIntegratorComponent
User : XMXA06
at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:973)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:235)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:541)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:430)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Application URL ':///sap/bw/BEx' is not valid! Please check the protocol and host entries for system 'SAP_BW'.
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:125)
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
... 27 more

Similar Messages

Issue in the standard report - S_ALR_87012357 outcome result

Dear Friends,
I am facing issues in the standard report S_ALR_87012357 "Advance Return on tax Sales/Purchases" where I am trying to pull the tax posting report for the current period.Here I would like to see the tax postings which are done with the custom t code ZFB01L (mass upload of data) which is the replica of FB01L. The issue here I see is, any postings done via custom t code with tax code does not appear in the standard report t code S_ALR_87012357. Please advice whether is there any alternative transaction code or program where in I can get all tax postings similar to this standard report or do we have to create a custom t code to get such report with the help of ABAPer.
Kindly advice.
Regards,
Siri

Dear expert
Example :
In Italy, you are required to register all you customer and vendor invoices about your company's sales and purchase activities within the country, in the European Union, or outside the European Union. According to the legal requirements, you need to create value-added tax (VAT) reports based on your customer and vendor invoices on a monthly basis. Depending on the size of your company, you can create the tax reports on a quarterly basis as well.
You can use the Advance Return for Tax on Sales/Purchases (RFUMSV00) program to create tax reports (tax books) according to VAT types. It enables you to maintain your VAT registers per VAT types. You can create separate input and output tax reports about your sales/purchases activities in the country, in the European Union, or outside the European Union according to VAT types. The program enables you to save your reports with a report number (for example: 1/2008, 2/2008), and it generates a summary per VAT code at the end of the report. The program ensures the correct progressive page numbering of tax reports and calculates the debit and credit balance for the given VAT type. You can carry forward the credit balance to the following month.
SE38 :RFUMSV00 =S_ALR_87012357
PATH
Accounting ® Financial Accounting ® General Ledger ® Reporting ® Tax Reports ® General ® Advance Return for Tax on Sales/Purchases ® Advance Return for Tax on Sales/Purchases.
Under
Set the following indicator(s)
Output control :Read address data
Output lists
Output tax: Line items
Input tax: Line items
Regards
Ajeesh.s

Issue while executing the report

Hello experts,
I have an issue related to executing the BI Report. In one report , i get an issue of Time Out, as the report is executed for a single day only with a single restriction. Also i execute the same report in RSRT, there also it gives a short dump. I checked the data into the related component for the same selection parameter values. here I get the data but it is creating issue while executing in RSRT or analyser or EP.
what is happening there am not able to understand. please advice.
Also searched in SDN but not get the relevant thread.
Thanks in advance
Neha

hii
The query does not includes any RKF, CKF any complex calculations. as I said before also query is based on MP which is designed on a single Cube. There are no such navigational Attributes used for selection, Number of records are not more than 300 on that particular selection parameter
there is only one info object which is creating issue & it is a master info object. If i am restricting this info object in the query & then executes the query , it gives the error msg also i put a variable for input parameter, & there I restrict the value, then also query executes with an error msg
But if query is not restricted with any value for that info object then query executes with in a second.
Thanks
neha

Issue in the standard report - S_ALR_87012357

Hi Team,
Could you please explain what is the purpose of this report. for the t code: S_ALR_87012357 and how it will work means after executing t code: S_ALR_87012357 any document will post in the back ground session for foreground session with reference of any g/l code.
Regards
Sangeetha

Dear expert
Example :
In Italy, you are required to register all you customer and vendor invoices about your company's sales and purchase activities within the country, in the European Union, or outside the European Union. According to the legal requirements, you need to create value-added tax (VAT) reports based on your customer and vendor invoices on a monthly basis. Depending on the size of your company, you can create the tax reports on a quarterly basis as well.
You can use the Advance Return for Tax on Sales/Purchases (RFUMSV00) program to create tax reports (tax books) according to VAT types. It enables you to maintain your VAT registers per VAT types. You can create separate input and output tax reports about your sales/purchases activities in the country, in the European Union, or outside the European Union according to VAT types. The program enables you to save your reports with a report number (for example: 1/2008, 2/2008), and it generates a summary per VAT code at the end of the report. The program ensures the correct progressive page numbering of tax reports and calculates the debit and credit balance for the given VAT type. You can carry forward the credit balance to the following month.
SE38 :RFUMSV00 =S_ALR_87012357
PATH
Accounting ® Financial Accounting ® General Ledger ® Reporting ® Tax Reports ® General ® Advance Return for Tax on Sales/Purchases ® Advance Return for Tax on Sales/Purchases.
Under
Set the following indicator(s)
Output control :Read address data
Output lists
Output tax: Line items
Input tax: Line items
Regards
Ajeesh.s

Standard report S_ALR_87012357 "Advance Return on tax Sales/Purchases"

Dear Friends,
I am facing issues in the standard report S_ALR_87012357 "Advance Return on tax Sales/Purchases" where I am trying to pull the tax posting report for the current period.Here I would like to see the tax postings which are done with the custom t code ZFB01L (mass upload of data) which is the replica of FB01L. The issue here I see is, any postings done via custom t code with tax code does not appear in the standard report t code S_ALR_87012357. Please advice whether is there any alternative transaction code or program where in I can get all tax postings similar to this standard report or do we have to create a custom t code to get such report with the help of ABAPer.
Kindly advice.
Regards,
Siri

HI Siri ,
This report should display all item related to Tax if they posted with tax code . Can you please check below things
1) your custom program with correct tax code .
2) When you run report for tax you do not exclude some Tax code .
3) Please check reporting country in report and check that docuemnt loaded in same reporting country tax code thrugh custmon program ,
Many Thanks

Standard Reports ME2K doesnt display Net order value

Dear,
On executing Standard Reports like ME2K,ME2N. I see Net Order Value column with Zero value, except for POs with Item category "D".
Why is this ???
Apperciating ur Suggestions
Regards
Zulfikar

Hi Zulfikar,
Net order value in ME2K corresponds to net value stored in accounting (table EKKN-NETWR) which is filled only in case of service purchase order. So for service PO, system will display this in ME2K or ME2Jreport which are based on account data display but not for material PO. This is not correspond to EKPO-NETWR.
EKKN-NETWR is not the same as EKPO-NETWR. They come from two different   database tables. In the accounting view of the report, we list what   is read from the database table EKKN. In the basic list, we read from EKPO. EKKN-NETWR is only used in service items, so you will see zero values for non-service item categories. The F1 help might have the same explanation for NETWR, and I could see how this might cause some confusion. However, the help is based on the data element, which is the
same for both tables.
I hope this will clarifies your doubts.
Regards,
Mauro

Error in standard report EEs Entered and Left dt appearing as zeros

Hi,
When I am executing standard report S_PH9_46000223 EEs Entered and Left dates are appearing as 00000000.
My observation was when the employment status was withdrawn dates were coming properly, but on demand of my client I had to change the employement status to inactive then onwards I had observed that dates are getting zeros. I request you to guide me how to get the entry and left dates in this report. Please specify any configuration is required.
Regards,
Rahul

Hi latha,
I tried the same in my system which is working fine, where i had selected the employement status as '1' and executed the report and i got all the dates as per the data base.
Try to mark the slection date as Upto today and execute the report.
thanks,
vasu.

Reports in SRM

Hi Sachin here,
Can you pl. suggest me if there is any report avilable in SRM for the following queries.
1) Report for POs with pending for Confirmation/GR.
2) Report for Who is the approver ( Name/ user ID) for the PO.
And can the requestor see who is the approver for a concerned PO.
Thanks in Advance
Sachin

Hi Sachin
There are no specific standard reports in SRM for your requirement.
You need to deveop custom reports for the same.
1. In the Check status section you can able to search the status for "Open for Confirmation".
In Confirm goods section you can search on time frame, product category, Product, Acct Assignment, Co. code.
2. No report available to check for all SCs.. You need to check the Approval preview link for each SC.
PS: Reward points if helpful.
Regards
Jagadish

FD10N - standard Report

Hi all,
I am working on the standard report for tcode FD10N.
The only issue with this standard report is it includes all entries done related to a customer, such as reversal and adjustments. Basically customer is looking for a real time sale and collection which should not include reversal and adjustment entries.
Exclude the following Doc type
Doc Type (BLART/BKPF) = YV is used for reversal from finance
Doc Type (BLART/BKPF) = RE is used for reversal from SD
It means any main or clearing entry which have document type YV or RE, should not consider for this report.
Pls help me as how to do it....
Thanks & Regards,
Rajkamal

Hi Rajkamal,
u can do one thing copy the Standard report in Z report first
then when u r fetching the record , just after that write this statement.
DELETE itab WHERE blart EQ YV.
DELETE itab WHERE blart EQ RE.
Cheers.
Snehi Chouhan

BW Reports in SRM 5.0

Hi
I need link or documentation where i can get information on BW reports used in SRM 5.0
Thanks
Ashish

Hi
Welcome to the world of SRM !!
Here are few reports which will help.
Program Name Report title 
BBP_BW_SC1 Ordered Shopping Carts per Cost Center
BBP_BW_SC2 Shopping Cart Status
BBP_BW_SC3 Shopping Carts per Product
BBP_BW_SC4 Shopping Carts per Cost Center
BBP_BW_SURVEY_SELECTION Select Survey
BBP_PD_CON_BW
BBP_PROD_SETTYPES_BW_MAPPING Form Routines with Mapping Set Type Structure -> Extract Structure
Please refer to these links which will definitely help.
Re: Availability of Standard Reports in SRM
Re: Standard Reports in SRM 5.0
Re: Is there a list available of all standard reports available in SRM?
SRM Reporting with BW
Re: Configuration guides or docs for BW SRM?
In mySAP SRM 5.0, various reports queries in the SAP Business Information Warehouse (BW) content have been removed or changed.
For more information about the reports available for each role, see the role descriptions in this documentation.
http://help.sap.com/saphelp_srm50/helpdata/en/b5/fb7e1ec3c74462a84d68c0ae745ba1/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/42/e80068887a3ee6e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/05/c8c93f3c903c1ce10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/ca/3e79413f1e0b0de10000000a1550b0/frameset.htm
Shopping cart Information
http://help.sap.com/saphelp_srm50/helpdata/en/64/e3ad3ca3c90713e10000000a11402f/frameset.htm
Supplier Allocation
http://help.sap.com/saphelp_srm50/helpdata/en/ae/14a45eb79ee84b8c4780b8f8f70d7b/frameset.htm
Hope this will help.
Regards
- Atul

Standard report for - Daily Store Material Issue

Hi All,
Can any one let me know which standard report gives me the details for "DAILY STORES MATERIAL ISSUE" in Oracle Inventory.
Thanks
Sunil

You can try the "Transaction Register" report and narrow it by transaction type and subinventory.
Hope this helps,
Sandeep Gandhi

Getting a dump while executing the standard report BUSCHDOC

Hi,
I am getting a dump while executing the standard report BUSCHDOC.
I am specifying the following values:-
Application Object : BUPA
Business partner:<some business partner>
Changed on: <some date>
Changed by:<some userid>
Below are the dump details
Short text
CREATE DATA: The specified type "BUSSRCH_401BUPAT" is no valid data type.
Any suggestions to avoid the dump are welcome.
Thanks,
Ravindra

Hi Ravindra,
Can you execute report BUP_BUSSRCHGF_REPAIR and try again ?
Also, go to transaction BUS10, click the button Geneate Selection. On next screen, give Application object = BUPA, Max no. of tables per view = 1.
Regards,
Rishu.

Standard Report check whether Goods Issue has been performed for DN

Hi All,
My users is having a list of DNs where they would like to check if Post Goods Issue has been performed for them. I would like to ask is there any standard reports as to check if a Delivery Note has PGI performed?
I have tried report VL06G but in this report we cannot give the DN No. as the key.
Thanks.

There is no standard reports to check GI by DN number.
You have to find out the Outbound Number first then check by Outbound number.
In SE16N, key VBFA table
Pump in your DN number under "Follow-on doc."
Under "Prec.doc.categ." select "J".
with the outboud number, you can proceed to check using above report suggested.
Alternatively, using same VBFA table. Pump in list of outbound number under "Preceding Doc." and select "Subs.doc.categ." as "R".
If you can set-up query reports, you can also get all the information directly with the DN Numbers.

Execute an standard report and sending by email

Hi
I've used this FM SO_NEW_DOCUMENT_ATT_SEND_API1 for sending email, but I can't use it for executing and sending an standard report (MB5B) by email, how can I do?.
Thanks in advance
Tokio

You can use
SUBMIT submitable TO SAP-SPOOL
                    SPOOL PARAMETERS print_parameters
                    WITHOUT SPOOL DYNPRO
                                        AND RETURN.
Here submitable is the name of the program for MB5B transaction.
This will create an entry in table TSP01.
u can read the entry and use the FM for sending email.
Edited by: vijetasap on Oct 26, 2009 2:20 PM

Standard reports issue

Dear All,
We are having an issue we have english as a base language and other language is arabic when we run any standard report in arabic it is suppose to appear RTL (RIGHT TO LEFT) but its appearing LTR (LEFT TO RIGHT), please let me know how can this be solved.
This is only happening with standard reports of oracle apps.
we are having oracle apps 12.1.3
OS: OEL 5.5
please advise
thanks
Hassan

I have notice one more thing this issue is mainly happening for the standard reports which are with text output if i make its output to pdf and run the report again it generates perfectly ..... please provide guidance
thanks

Issue to execute standard reports in SRM 7.0

Similar Messages

Maybe you are looking for