Issue Tracker app - how to make one page public

Hi all,
We have installed and made a few tweaks to the Issue Tracker demo app, and are finding it very useful! We have just a handful of users that have logins for the application, and it is working well for them. We would like to make a modification to the app, so that the main "Issues" page (that lists out all of the issues, and you can search them) can be viewable by anyone in our company. Is there a way to do this? Basically, I'd prefer to be able to just send out the URL for this page, and make it so that anyone in our company can just go to that URL, and have Read-Only access to this page (without having to login), so they can search for issues, and see their status. I would also want to make it so that these folks cannot see the "Add a New Issue" button, and probably hide the breadcrumb at the top as well.
I know that I could create a whole separate AppEx app, and basically just duplicate the layout of that one page, and make that application public. Is that the easiest route? I was assuming there would be a fairly simple way to take the existing app, and just tweak it so that this one page is public.
Any advice?? Thanks!

Quick update - that was easier than I thought! I simply made that one page Public under the Authentication. And I was able to make the "Add a New Issue" button only viewable by the Admins.
One more question - is there a way to do a similar thing with the breadcrumb at the top? Currently, when I go to the public page, I see the "Home - Isses" breadcrumb at the top left. If I click on the link for Home, then it brings me to a login. However, it would be best if the public users didn't even see this breadcrumb. Is that possible?

Similar Messages

HT5137 my app is stuck on one page of the ibook I was reading. How do I close my ibook and get back to the main library?

My app is stuck on one page of the ibook I was reading. How do I close the ibook and get back to the main library?

A number of extensions can cause that problem, you'll need to do a little troubleshooting to find out which extension is causing that to happen for you.
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Issue Tracker app closing the browser window on chart page

Hi!
I am walking through the Issue tracker tutorial. I have created page 10 (Issues Resolved by Month) which is the chart page. Everything looked fine until I try to run the page. Then it simply closed the browser window after it authenticates me. Anyone else see this? Any ideas?
Thanks!

Probably a problem with your SVG viewer installation. Does it happen on other chart pages as well? What browser/svg viewer version combination are you using? There are some known issues with what's labeled as the current svg viewer on Adobe's website and Firefox.
Earl

Issue Tracker App Demo

As I'm a newby to htmldb, I'm building the Issue Tracker app demo. Did anyone who has already built the demo have trouble with create/edit Person information on page 4? When I submit, I get the following error:
Error ERR-1025 Error processing PLSQL expression. (:p5_person_role in ('CEO','Manager') and :p5_assigned_project = '%||'null%') or (:p5_person_role in ('Lead','Member') and :p5_assigned_project != '%'||'null%')
OK
ORA-06550: line 2, column 29: PLS-00103: Encountered the symbol "NULL" when expecting one of the following: . ( ) , * @ % & - + / at mod remainder rem and or || multiset
Any assistance would greatly appreciated

Glenn,
Looks like a syntax error in a condition: a missing quote: :p5_assigned_project = '%||'null%')
should be
:p5_assigned_project = '%'||'null%')You'll have to poke around to find where that condition exists (on a region, an item, etc.). Or you could search for it in the export file.
Scott

How to make a page header

how to make a page header

Lynn,
Numbers 3 currently doesn't have page headers.
However, there are some workarounds that can achieve the effect of having headers (though, for footers, you're limited to page number). See this in Print Preview:
You can set up extra Header Rows in your table and have them repeat on each printed page. The Table Name only shows on the first printed page, so you may want to uncheck Table Name before printing:
See this thread for an example of how this workaround worked for one user.
SG

Can't Export ALL Comments from Issues Tracking app in Sharepoint 2013

I really like the flexability of the SharePoint 2013 Issues Tracking application. I am able to enter the initial issue, then update it regularly with "comments". Each comment is added as a seperate entry to the issue, date stamped, etc.
The issue I am having is in exporting this to Excel. I know, I know, the purpose of SharePoint is that you DON'T turn everything into an Excel spreadsheet. However, I have to send the issues to an external contact that does not have access to the SharePoint
environment. When I export to Excel, it only adds the LAST comment to the Comments column in the spreadsheet. I need all comments combined, and dropped into the correct cell.
Is there a way to do this? I found another thread where it seemed everyone accepted the fact that this was not possible, but I thought I'd try one more time and see if there were any new ideas.
I believe this is tied to the option of "Append Changes to Existing Text" that is available in the Edit Column settings for the Issues Tracking app. I see that you can turn this off, but then you lose the ability to date-stamp each entry. If there
is no good solution, then I think the only alternative would be to turn this off, then just manually add a date to each time.
Word of caution!! If you have a bunch of comments already appended, and THEN you decide to change the option from Append Yes to Append No, it will hide all previous comments. I did this and thought I'd lost them, but when I changed the option back
to Append Changes, they were all still there. I may need to manually cut-paste every single comment out, change to Append No, and then manually past the entire comment thread back in. Will be very tedious for a large issues log.
Thank you.
Bill

Update - The only solution I was able to change to "Append Changes to Existing Text", then do as I dreaded, which was to manually cut and past every comment out then back into the single field. Definitely a good lessons-learned to set the
value to "Append Changes to Existing Text" before starting.

When the page will be load how to make the page blank in run time

Dear
when i will run the page the fields shoud come with blank Field.
i want to make it in runtime.
example- i have one page having employees data. but when i will run that page the data will not come only blank fields should come, after thar i will create.

duplicate how to make the page blank field in runtime

HOW TO SHOW ONE PAGE AT A TIME

Does anybody have a clue how to show one page at a time? I clicked Facing Pages in the Inspector and 2 columns of pages showed up. Now, I can't get it back to just one page showing up at a time. There must be a fix, but I don't' want to spend days on this. Many thanks.

Frank,
At the bottom left of the page, click on the zoom percentage, then select One-up from the menu.
-Dennis

How to make a page break in numbers

The only way I found to make a new page in Numbers was to make new rows down to where the page would break, but it's only letting me add a few new rows to the new page. I'd like to know how to make a page break without just adding rows.

Hi Yellowbox,
Still I'm not convinced, it gives you indeed some advantages but this page break is a great fault.
All the company is working on Apple, we try even to keep Microsoft away but what when you make a quote of several pages and have to make your lay out at the end, it is a pain in your xxx to make it well.
We cannot make different tables for each page nor I want to make it in Pages with a Numbers table.
Secondly, what do you do when you get a Excell offer that you want to bring to Numbers.
It opens well but again, you need to make all the page lay out afterwards!
Thanks for yoru reply.
It won't change my mind about Apple and Microsoft but for timing earning I won't changes all Excel offers to Numbers anymore. Even if I do not want, it would take me less time to work it out in Excel.
Our own offers will remain in Numbers ...
It is a pity but time is so important nowadays!
Nice week-end.

HT5796 I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed

I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed my problem.

I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed my problem.

How to make turning page with ibooks author?

How to make turning page with ibooks author?

This question has been answered on this thread
https://discussions.apple.com/message/17981772#17981772#17981772
Best regards.
Alex

Slide duration - How to make one slide have a different duration to another slide?

Slide duration - How to make one slide have a different duration to another slide?
EG So one slide has 2 seconds, another 4 another 6
All I can see is how to make all slides have the same duration
Any help very much appreciated!
Brian

Slide durations are not changeable on a slide-by-slide basis.

How to connect one page using button and by link in BSP

how to connect one page using button and by link in BSP

hi,
use on 'onclick' functionality.
1. In layout, onclick = 'NEXT_PAGE' of the button
2. Capture the event in onInputprocessing,
DATA: event_id TYPE REF TO cl_htmlb_event.
case event_id.
when 'NEXT_PAGE'.
navigation->goto_page( 'URPAGE URL' ).

How to make a page reload

Hi every body, and thank you for reading my post, here's the question I have
Does anybody know how can I make a page reload???
Thank's

If you mean how to make the page reload when someone pushes a button or clicks an action component such as a hyperlink, then have that component's action method return null. To create the action method for a component, double click the component in the Visual Designer.
To make the page reload after someone selects from a drop-down or list, or when the user changes the value in an input text field, right-click that component and choose Auto-Submit on Change.
Chris

How to make Login Page in ADF?

Hi,
Can anyone suggest me, how to make Login Page in ADF.
I am new on ADF, is any sample code or application is there than it will be helpful for me.
please reply its urgent.
Thanks,
Ramit Mathur

HI,
Jspx code
<af:panelFormLayout id="pfl1" binding="#{loginBean.mainForm}">
<f:facet name="footer"/>
<af:inputText label="Username" id="it1"
value="#{loginBean.username}"
binding="#{loginBean.usernameId}"
required="true"/>
<af:inputText label="Password" id="it2" secret="true"
value="#{loginBean.password}"
binding="#{loginBean.passwordId}"
required="true"/>
<af:spacer width="1px" height="20px" id="s3"/>
<af:panelGroupLayout id="pgl3">
<af:commandButton text="Submit" id="cb1"
action="#{loginBean.doLogin}"/>
<af:spacer width="85px" height="1px" id="s4"/>
<af:commandButton text="Cancel" id="cb2"
action="#{loginBean.clearFields}"/>
</af:panelGroupLayout>
</af:panelFormLayout>
BackingBean code
public String doLogin() {
String un = _username;
String pw = _password;
// byte[] pw = _password.getBytes();
FacesContext ctx = FacesContext.getCurrentInstance();
System.out.println("ctx" + ctx);
HttpServletRequest request =
(HttpServletRequest)ctx.getExternalContext().getRequest();
CallbackHandler handler = new SimpleCallbackHandler(un, pw);
System.out.println("Handler" + handler);
try {
Subject mySubject = Authentication.login(handler);
System.out.println("mySubject" + mySubject);
ServletAuthentication.runAs(mySubject, request);
ServletAuthentication.generateNewSessionID(request);
String loginUrl =
"/adfAuthentication?success_url=/faces" + ctx.getViewRoot().getViewId();
System.out.println("loginUrl---" + loginUrl);
HttpServletResponse response =
(HttpServletResponse)ctx.getExternalContext().getResponse();
System.out.println("response---" + response);
// loginUrl = "/adfAuthentication?success_url=/faces/WelcomeScreen1.jspx";
sendForward(request, response, loginUrl);
System.out.println("---" + response);
} catch (FailedLoginException fle) {
FacesMessage msg =
new FacesMessage(FacesMessage.SEVERITY_ERROR, "Incorrect Username or Password",
"An incorrect Username or Password" +
" was specified");
ctx.addMessage(null, msg);
} catch (LoginException le) {
reportUnexpectedLoginError("LoginException", le);
return null;
private void sendForward(HttpServletRequest request,
HttpServletResponse response, String forwardUrl) {
FacesContext ctx = FacesContext.getCurrentInstance();
System.out.println("sendForward--ctx--" + ctx);
RequestDispatcher dispatcher =
request.getRequestDispatcher(forwardUrl);
System.out.println("sendForward--dispatcher--" + dispatcher);
try {
dispatcher.forward(request, response);
} catch (ServletException se) {
reportUnexpectedLoginError("ServletException", se);
} catch (IOException ie) {
reportUnexpectedLoginError("IOException", ie);
ctx.responseComplete();
// 12.Implement a reportUnexpectedLoginError() method:
private void reportUnexpectedLoginError(String errType, Exception e) {
FacesMessage msg =
new FacesMessage(FacesMessage.SEVERITY_ERROR, "Unexpected error during login ",
"An incorrect Username or Password" +
" was specified");
FacesContext.getCurrentInstance().addMessage(null, msg);
e.printStackTrace();
}

Issue Tracker app - how to make one page public

Similar Messages

Maybe you are looking for