Issue w/ Queues in Server 10.5.5, Xerox 7760s: They print, but offset

A little background:
Currently we have a mix of 80 fully patched 10.4.11 and fully patched 10.5.5 clients printing directly to 4 identical Xerox Phaser 7760DXs via ipp. They work great. No problems with clients printing directly to the printer.
-BUT-
For reasons beyond the scope of this post, we MUST move the clients to use server queues (PaperCut).
Server is now a clean test server running fully patched 10.5.5 OS X Server with just print services running.
We set up 4 queues the usual way, and then set clients to print to the named queues via LPR, designate the correct driver/ppds on the client.
The clients CAN print, however, out of every app we try, from TextEdit to Illustrator CS3 -anything-
the print outs are blown-up or offset really noticeably -
Say you set up Preview to
print a 7"X5" jpg to centered, on tabloid in landscape. Set the scale option to %100 (no scaling) and
it prints basically off center: up and to the left about 25% of the total page size- really off.
Again, not app related, textedit does this with a single word of centered text, photoshop CS 3, BBEdit, Firefox, etc every print, all print out offset more or less to the same degree, no matter how one sets them up.
Same clients, setups, but printing to the printer directly, rather than by the queues, in all the same apps, you never have this issue.
We did look at this as far as the pstop file version and 10.5.5:
http://www.macosxhints.com/article.php?story=20080925104227545&query=print%2Bque
and no, substituting the older pstop files did not correct the situation.
Ideas, input greatly appreciated.

Similar Messages

Issue listeneing queue from Weblogic Cluster server with multiple managed server

Haveing issue listeneing queue from Weblogic Cluster server with multiple managed server.
Weblogic Cluster structure is like
Weblogic Cluster01
--ManagedServer01(http://server01.myhost.com:7001)
--ManagedServer02(http://server02.myhost.com:7001)
JMS Servers
JMSserver01 targeting: ManagedServer01
JMSserver02 targeting: ManagedServer02
JMSmodule
ConnectionFactory01 targeting:JMSserver01,JMSserver02
UDQueue01 targeting:JMSserver01,JMSserver02
Uniform Distributed Queue in Monitoring tab showing like this
mysystemmodule!JMSserver01@UDQueue01
mysystemmodule!JMSserver02@UDQueue01
So when I am sending message to any Host(by specifying the provider URL) its distributing equally on both server like
mysystemmodule!JMSserver01@UDQueue01 10
mysystemmodule!JMSserver02@UDQueue01 10
But when try to listen message from these queue, it is listening from one server, for which URL given to connect.
mysystemmodule!JMSserver01@UDQueue01 0
mysystemmodule!JMSserver02@UDQueue01 10
untill I connect to other server by giveing its URL, will not able to access other message left on the queue.
Solutions that tried
1) we have tried give both server URL coma sparated in provider URL
we need to configur same scenario for 5 managed server with 3 listener on other servers.
Do any one have solution for this.

You need to have:
1. Consumers connected to each UDQ member
OR
2. If no consumers in some of the members is expected, you can configure Forward Delay (specify the amount of time, in seconds, that a queue member with messages, but with no consumers, will wait before forwarding its messages to other queue members that do have consumers):
http://docs.oracle.com/cd/E12839_01/apirefs.1111/e13952/taskhelp/jms_modules/distributed_queues/ConfigureUDQGeneral.html
For example you can set it to 10 (10s)
Additional Information here:
http://docs.oracle.com/cd/E23943_01/web.1111/e13727/dds.htm#i1314228
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13951/mbeans/DistributedQueueBean.html?skipReload=true#ForwardDelay
How Does JMS Load Balancing Work with Distributed Queues and Uniform Distributed Queues? (Doc ID 827294.1)
I hope this helps
Best Regards
Luz

Issue with queues

Hi,
We have an issue with queues in our PROD server. We are having about 35000 IDOCs stuck in 'smq2' with the IDOC on the top of the list in SYSFAIL status, with the message <b>'Problems found during the EXPORT to specified keyin table'</b>.
The short dump on ST22 says 'EXPORT_TABLE_UPDATE_CONFLICT'.
Please advise.
cheers,
Prashanth

Prashanth,
I think this is the issue with the database. Can you check whether the database is having enough space or not. If not kinldy increase the space.
This thread is having the same issue. Check this it may help you:
Process Integration (PI) & SOA Middleware
---Satish

Need help on resolving the issue with adobe output server - error MSG256 & MSG 210 not in .ini file

Hi,
I am using adobe output designer 5.5 for designing the label template and using the Adobe output server for printing process.
In the Jfmerge.ini we given the condition "DiscardUnknownFields=Yes" for ignoring the unwanted fields in the .dat file.
During the process, I faced some issue with the output server in printing the labels.
When the .dat file is placed in the Data folder of adobe, the label is not getting printed in the printer.
The file is move to the error folder and an error file is getting generated which contains the error message as given below:
090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [256]** Message Msg256 not in .ini file **
090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [210]** Message Msg210 not in .ini file **
2009/08/26 02:59:02 D:\Program Files\Adobe\Central\Bin\jfserver.exe: [314]Agent exit message: [210]** Message Msg210 not in .ini file **
The output server is a new installtion and I verified the Jfmerge.ini file. It contains the message details of Msg256 and Msg210.
I also verified the license and it is a valid licence.
Kindly help me out in solving this issue.
Thanks
Senthil

I assume this is too late to help you, but other might need a hint. I had the same problem, and found some possible causes that I posted on http://codeznips.blogspot.com/2010/02/adobe-output-server-message-msg210-not.html.
It is quite likely that you are missing some double quotes around the path specifying the ini file (-aii), if its installed under "Program Files".
Hope this helps anyone....
Vegard

Having issues with starting Reports Server on RHEL5 after installation

Hi, I installed Oracle Application Server 10.1.2 on RHEL, ran the patches to move it up to 10.1.2.3. I've also put a couple patches in addition.
When I go to my application server console, I noticed everything is started up but my Reports Server. I've tried to manually start it via the browser, and it tells me it starts up. But when I go back to the main page of the application server console, it shows still as down. I've tried to log onto the server and issue a statement to start the reports server. However, it still will not start.
I followed the steps made in Metalink Document 564174.1 and did everything that was asked.
Anybody got any ideas on what might be causing this?
The only error (warning message) I received during any part of the installation process was the OPMN Process Manager didn't start. I went ahead and continued (not sure if that's my problem). But that was the only issue. And like I say, the forms server seems to work fine. No issues. I've set up my application and I can call all the forms in my application. It works.
Regards,
Chris

One thing is that the status in EM console is showed ad Stoped and indeed it's stoped and other is that the EM is not able to see if the process is up. Lots of times I had problems like this where the Reports Server is showed as down but the proc exist and the service is attending request.
Have you try to test report server running a sample report?
Have you check is exist a proces for the report server?
Have you use the rwdiag.sh -findall to see if the process exists?
Hope this helps
Greetings.

Facing Issue while Installing SOA server for setting up BPM11g working environment

Hi All,
I have been able to install Database and Weblogic Server but I am facing issue in installing SOA server.
I am trying to install it for running BPM 11g application.
I saw the same problem has already been answered but available solutions are not resolving my problem.
Error Message:Provide the JDK/JRE location while launching the installer.Invoke the setup.exe with -jreLoc<JDK/JRE location absolute path>parameter(s).
I tried both way for initializing the installation. i.e directly through setup.exe and by command prompt but in both the cases I am getting same error.
It is not asking for Java path in command prompt also.
a)In my system java 7 is installed.
b)I have used Oracle Database 11g instead of XE
Can this be the reason?
I checked Program Files:
jre7 and jdk1.7.0_45 are there.
I also have set JAVA_HOME in environment variable as C:\Program Files\java\jre7
path :C:\Program Files\java\jdk1.7.0_45\bin
Please help me in fixing this as I am stuck in this installation from last few days.
Thanks!

Hi Binay,
You might want to consider instead installing it using JDK 1.6.
Here's where you can check the Fusion Middleware configurations: http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
It's buried in there, but bottom line is that Oracle BPM 11g (PS6) 11.1.1.7 needs JDK 1.6 (for Windows it is either JDK 1.6.0_35 or JRockit 6 Update 37 R28.2.5+) and I'd suggest you use JRockit.
Dan

How can I list print queues per server via power shell script

Hello,
we are managing many print servers on our domain environment, now for auditing purpose I need to report print queues per server, and it seems bit difficult task doing it via GUI in print management view, could someone help me with script which
gets me the no. of print queues on each print server.
Also I need to list all the print drivers installed on each print servers.
I tried to list the drivers " Get-WmiObject win32_printerDriver -filter " but this will get me complete information about the driver, I need to list only the driver name (-filter) either _RELPATH or _PATH
dibu

You can also use WMI like this:
(get-WmiObject win32_printer -computer ws702).count
I don't understand what you mean by list only. Just select what you need.
See: http://technet.microsoft.com/en-us/scriptcenter/dd742419
That will give you some basic background on how to use PowerShell to get the properties of objects.
¯\_(ツ)_/¯

[svn:bz-trunk] 17102: Rewrite all ImageSnapShot tests to avoid any timing issue on various app server .

Revision: 17102
Revision: 17102
Author:   [email protected]
Date:     2010-07-28 11:48:20 -0700 (Wed, 28 Jul 2010)
Log Message:
Rewrite all ImageSnapShot tests to avoid any timing issue on various app server.
Modified Paths:
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/ImageS napshot/testCaptureBitmapData.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/ImageS napshot/testCaptureImage.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/ImageS napshot/testCaptureImageJPEG.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/ImageS napshot/testCaptureImageScaleLimitedFalse.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/ImageS napshot/testCaptureImageScaleLimitedFalseJPEG.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/ImageS napshot/testCaptureImageScaleLimitedTrue.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/ImageS napshot/testCaptureImageScaleLimitedTrueJPEG.mxml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/ImageS napshot/testEncodeImageAsBase64.mxml

I am modifying the correct httpd.conf file on the server, it just doesn't seem to work. - If I put the rewrite rules in the <Directory /> the rewrite works but it adds /Library/WebServer/Documents to the URL.
I also tried putting the rewrite rules in <IfModule mod_rewrite.c> but that did not work either.
mod_rewrite is enabled and running on the server.
I will post the rewrite rules again in the code brackets. Sorry for the long post. - If some one can try them out on their Leopard Server to see if they can get them to work, it would be much appreciated. Again, these work on my Leopard Client but I can't get them to work on Server.
-- The httpd.conf file posted above is just the default conf file found in /private/etc/apache2/
<code>
RewriteEngine On
Options +FollowSymLinks
RewriteRule ^(.+)/$ http://%{HTTP_HOST}$1 [R=301, L]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.php(.*)\ HTTP
RewriteRule (.+)\.php(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.asp(.*)\ HTTP
RewriteRule (.+)\.asp(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.aspx(.*)\ HTTP
RewriteRule (.+)\.aspx(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.htm.(.)\ HTTP
RewriteRule (.+)\.htm.(.)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.cfm(.*)\ HTTP
RewriteRule (.+)\.cfm(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.bak(.*)\ HTTP
RewriteRule (.+)\.bak(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.inc(.*)\ HTTP
RewriteRule (.+)\.inc(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\..(.)\ HTTP
RewriteRule (.+)\..(.)$ $1$2 [R, L]]
<code>

Whenever an slowness issue came in sql server how should I start?

whenever a slowness issue or performance issue came in sql server how should I start?
Please guide.
Thanks

Hi Ajay,
All answer given above would be useful to you in some or the other scenario. if you are facing performance issue the approach you take determines how easily and quickly you can find solution.
First thing is know your system how it works for that you need to first baseline a system. A system with 70 % CPU utilization would not always be issue but for some environment it can be. If you know your system very well moment performance issue comes
you would know where is the problem. Wait stats alone is never helpful you must be able to correlate wait stats to what is going on your system. If you know which query is causing issue its easy to see execution plan and tune it. If issue is server wide it
can be due to missing index outdated stats slow disk subsystem etc. So first step is finding the cause. As Uri suggested wait stats are always helpful I use wait stats and refer to below whitepaper by Microsoft for SQL Server troubleshooting
http://technet.microsoft.com/en-us/library/dd672789%28v=sql.100%29.aspx
Remember important thing is knowing your system and that can come from base lining.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Issues when configure LDAP server in OBIEE

Hi,
I have a big issue, I configure LDAP server for authentication of users, and everything looks fine, but my problem is when I log in Interactive Dashbaords, I enter without any problem, but some parameters and some filters and some functions are NOT working, for example:
-In a parameter I have this condition for Default value: SELECT YEAR(Tiempo.Dia) FROM Finanzas WHERE Tiempo.dia = CURRENT_DATE, and returns me a null value, but if I change to this SELECT YEAR(Tiempo.Dia) FROM Finanzas WHERE Tiempo.dia = CURRENT_DATE-1, returns me "2010"
I have similar behaviors in other parameters, and some filters and some functions.
Everything happen in Development instance. I configure LDAP server in Development instance.
In Production instance nothing of this is happen, but I do not configure LDAP server yet.
What do anyone think is happen here? This happens because I configure LDAP server? What do you think that mades this behavior for my parameters, filters and functions?
Do you think is a better practice to clone Production instance to Development instance? If so, how can I do a clone instance, only for OBIEE?
Regards,
Arnulfo
Edited by: ArnulfoPA on 25-may-2010 15:35

The date returned by CURRENT_DATE is determined by the system in which the Oracle BI Server is running. So, does CURRENT_DATE returns an equal values on prom and dev instances in your case?

ADF Application Runtime issue in StandAlone Weblogic Server

Hi All,
I tried deploying my ADF Mobile Browser Application in a StandAlone Weblogic Server. The application was targeted to Admin Server and everything worked fine.
But when Targeted to Managed Server the login page alone was rendered (without CSS). Tried loging in with correct as well as wrong passwords but there was no response from the page. (Login button acted like a dummy one)
Even the managed server log had no error messages.
DataSource where configured correctly and targeted both to Admin n Managed Server.
I tried deploying the same in Client's Testing Environment and the same problem occured even in Admin Server.
I couldnt figure out wats the issue.
PS:
Weblogic Server Version : 10.3.6
ADF Runtime:11.1.1.6
JDeveloper Version : 11.1.2.1
The App Contains ADF Authentication Security. Will that cause any issue?
Two Cents
Karthick

Your jdev version and the adf runtime on the wls have to match. Check http://tompeez.wordpress.com/2011/09/14/jdeveloper-versions-vs-weblogic-server-versions/ for a list of matching versions.
Timo

Issue with connecting the server from dreamweaver

Trying to create "New Business Catalyst Site", but Im getting an error "There was an issue connecting to the server, try again later".

Manage to figured it out.

There was an issue connecting to the server. please try again later. 124.

I'm trying to publish a site withdreamweaver as one of the 5 sites I get with my CC account using business catalyst, but I get the following error message "There was an issue connecting to the server. Please try again later. 124." whenever i try and connect which doesnt really help.
I'm logged in with the correct account in dreamweaver, and i have no issues publishing sites from muse using my CC account.

Hi Pirmin87,
There was a known brief outage a few days ago that could have resulted in this.
- http://status.businesscatalyst.com/
However at the moment everything should be connecting fine. If still an on-going issue please reach BC direct chat support for further investigation.
- http://helpx.adobe.com/contact.html?product=business-catalyst
Kind regards,
-Sidney

How to delete items in download queue on server side?

how to delete items in download queue on server side?

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple. If you've tried deleting them and they keep re-appearing in your downloads then you will need to try contacting iTunes Support to get them removed : http://www.apple.com/support/itunes/contact/

Listner issues in Oracle 11g server installation

Hi,
I am facing problem while connecting to Oracle 11g server on 'Windows 7 Enterprise edition - 32 bit OS'.
I have successfully installed Oracle 11g server on Windows & enterprise machine.
Listener and TNSnames.ora files are fine. But I am not able to connect through Oracle client machine. it shows 'TNS: Could not resolve the service name'.
When I check the listener status on the server, it shows the service ABBPROD is READY, but still not able to connect through client machine. I have gone through many similar threads and tried out the solutions provided but the problem still exists. Few of the things I tried are as below.
1. I have tried changing the ORACLE_SID and setting the $ORACLE_HOME parameter.
2. Tried replacing the HOST as 'localhost' to system IP address/computer name
3. Listener stop and start
4. Service stop and start
5. Checked the firewall settings of the server machine
I shall paste the listener.ora and tnsnames.ora files below.
LISTENET.ORA
# listener.ora Network Configuration File: C:\app\INSAJEN\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\app\INSAJEN\product\11.2.0\dbhome_1)
      (PROGRAM = extproc)
      (ENVS = "EXTPROC_DLLS=ONLY:C:\app\INSAJEN\product\11.2.0\dbhome_1\bin\oraclr11.dll")
    (SID_DESC =
      (SID_NAME = ABBPROD)
      (ORACLE_HOME = C:\app\INSAJEN\product\11.2.0\dbhome_1)
      (PROGRAM = extproc)
      (ENVS = "EXTPROC_DLLS=ONLY:C:\app\INSAJEN\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
ADR_BASE_LISTENER = C:\app\INSAJEN
TNSNAMES.ora file
# tnsnames.ora Network Configuration File: C:\app\INSAJEN\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
ABBPROD =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.140.233.130)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = abbprod)
LISTENER_ABBPROD =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
SQLNET.ORA
# sqlnet.ora Network Configuration File: C:\app\INSAJEN\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)Please help me to debug and resolve the problem. If any more information is required, please let me know

SBH wrote:
I checked the global_name, it is ABBPROD.asiapacific.abb.com...
I tried setting the ORACLE_SID same as this name, but still the same issue exists
@Mahir, this is a production environment, and I cannot take risk of rebuilding tnsnames and listener.ora filesand
I am facing problem while connecting to Oracle 11g server on 'Windows 7 Enterprise edition - 32 bit OS'.
I have successfully installed Oracle 11g server on Windows & enterprise machine.Your production sever running on Windows 7 EE 32bit?

Issue w/ Queues in Server 10.5.5, Xerox 7760s: They print, but offset

Similar Messages

Maybe you are looking for